@garrukthewildspeaker262 is your bluetooth a dongle or built in? Sorry for this next question but I have to ask... have you just opened the PSVR2 app on steam and expected them to appear or have you paired then via Windows?
@@GameOnScorpio I have a gigabyte b650 gaming motherboard with a built-in Bluetooth adapter. And yes, I'm trying to pair it via Windows. I press the share + ps button until it's blinking, but my Bluetooth doesn't see controllers. It can see other devices such as headphones, wireless keyboards etc. And the controllers work fine with my PS5. And I turn the PS5 off when I try to pair them to the PC. I reinstalled Bluetooth drivers and updated the drivers on the controllers.
@@garrukthewildspeaker262 Oh very odd... I just looked that MB up and it's BT 5.2 so should be fine... the headphones, wireless keyboard etc that you mentioned... are they bluetooth or just wireless with their own dongles though? Hopefully you're able to figure it out soon!
I tried Tp-link UB500 with 1 meter extension cable, and it didn’t fix the tracking issue. TP-link UB500 with 3 meter extension cable plug in the USB2.0 , and it works perfectly.
i also have the bt 500 and it is way worse for me so get this i just finished setting up my psvr2 for my computer and in probably less than 15 minutes my game (recroom) AND STEAMVR crashed and i also had controller freezes and 6dof not working (somtimes) so it is not so buttery smooth for some people
I solved all my issues with tracking by buying an USB extension cable and instead of using the TP-Link adapter, swap that piece of shit for the ASUS USB-BT500 dongle. Just now played Half Life Alyx until the battery of the controllers were empty. No tracking issues anymore!
There are so many reasons Bluetooth could be struggling. For most people having problems with it, I think it's likely because their Bluetooth just isn't setup or updated properly (because they've never actually used it before). A lot of people don't even know their built-in Bluetooth needs antennas plugged in to work. A lot of TH-camrs are giving lousy advice to use those tiny dongles in all cases rather than fixing the existing built-in Bluetooth. You've got it right that this will generally be inferior. You should really only use those dongles if your PC has no Bluetooth to begin with or as a last resort if you really can't get your built-in Bluetooth to work. Your solution I think brings up the nice thing about the PC adapter using the PC's Bluetooth support. You can provide your own much more powerful Bluetooth hardware if you need to. Most people probably will not need a beast like you bought. But the option is available. As to why you need it? Based on what you described, I think you're dealing with 2.4GHz interference. You mentioned turning off other devices, but the source could potentially be farther away like neighbors with powerful wireless routers or something. It can even be coming from sources other than WiFi gear. This is also why Sony can't guarantee that whatever Bluetooth hardware you choose will necessarily work. Sony doesn't have control over the user's Bluetooth setup nor their RF environment. Unlike consoles, in PC land you are expected to provide your own working PC. Sony's list of Bluetooth devices is just suggestions for adapters they have specifically tested with that are known to work. A lot of TH-camrs have misunderstood that and think it means _only_ those adapters are compatible.
This is valid, but if this is mostly down to interference, why is it always the same controller, and why doesn't the proximity to the BT dongle matter in this case? (I turn around 180 degrees, still same controller gets lost, I hold it next to the dongle looking at it with the headset cameras, tracking still drops, etc.)
Motherboard BT support is pretty basic, bandwith is small too. For example you can only use 1 playstation controller (ps4/5), but with an tplink ub500 you can use 2-3 easly.
I was one of those people that didn't know I needed an antenna connected to make it work. Plugged mine up to my Gigabyte Aurus and it now works flawlessly.
@@BLITZandKILL Did you plug in the antenna that came with the MoBo? I also have a Gigabyte Aorus that came with the WiFi antenna and I'm thinking of maybe connecting that to my PC and see if anything changes Edit: God damn, it fixed everything! It works perfectly now, thank you so much! Didn't even need to buy anything new
Sony should have provide all the necessary tools from the start... Man, you have to buy the adaptor, then the bluetooth and you still need and extra cable to connect to the graphics card. And there's still a chance something goes wrong because pc stuff... But from what I've played so far, I gotta say Half Life Alyx is an amazing game.
Yea it could have been handled better for sure, and if providing more stuff meant it cost more, we would have still paid it... Glad to hear you're enjoying HLA!
My Asus B550 motherboard came with a WiFi 6 antenna which also has Bluetooth and I use it all the time for connecting Xbox controllers and Bluetooth ANC headphones. I don't have a PSVR 2 yet but plan to grab it if it goes back on sale. Hopefully I'm able to connect out of the box. Glad you figured it out!
@@andrewsheldon604 i have the rog strix b-550 wifi 2 which has bluetooth 5.2 controllers won't track good enough to even setup my play area. it just keeps bugging out.
Thanks much for the tip. Two details that are important. One, only one controller can be on for the firmware update to not turn off the controller at 28%. Two, to turn off the controller you have to hold down the PS symbol button for about 15 seconds. There is a little white light on the bottom when the controller is on. I was failing because I didn't realize the other controller wasn't actually turned off.
Ended up going the same route with pcie Bluetooth/ WiFi pcie card. My tp500 didn’t work consistently either. But after installing card, no more tracking issues.
I’m currently using the same TP link and it works 90% of the time. Only occasionally I get the locked left hand crap. But at them moment I hardly use the controllers. I have been hooked on StarWars Squadrons with a flight stick. Absolutely incredible in Vr
Tracking for me has been flawless (as in literally flawless, no dropouts, locking in place like some users have suffered from) with the TP-Link dongle. It's on an old USB extension cord that I used to use back in the CV1 days to extend a sensor., about 1.5m away from my PC. My major hurdle was getting the PS App to finish the overall setup process in the first place, but since then, no issues. On the other hand, I know Gary(immersed Robot) has been suffering tracking issues using the same dongle. It's good that you found a solution that works for you, but having to drop the same price again as the adapter cost in the first place to get it working... It's been a poor show from Sony really.
@FlukeRogi as mentioned in someone else's comment, there could be interference from devices from neighbours etc... something I didn't think about. Yes, I shouldn't have to spend more money to get the product working and something I've mentioned before is that Sony should have provided something that would guarantee (as much as possible) a seamless experience...
I bought the same when the built in Bluetooth adapter on my laptop did not work. Sad thing it doesn’t run on my laptop (for obvious reasons) but works perfect on my desktop machine👍👍
It's the one I use and works perfectly. It's down in price on amazon right now. Also you can pay £14 a month for 3 months. So you probably won't even miss the money going out. It's down from £49 to £41 right now. Hope this helps anyone who is interested. I saw your link in the description so I looked and was pissed it was down in price seeing as I have only has it 2 weeks myself. I can't be bothered to send it back for £8. I'm not saying that £8. Is nothing but I would be able to play with my headset until I sorted it out lol. Love your videos keep up the good work.
@@keithdanmendoza2559 if you have a free PCIe slot then it should, but when it comes to fitting new parts into a computer, you need to know your PC, it's parts as everyone's is different.
Thank you. I've been having non-stop controller tracking issues (it was always the right one, then it suddenly was always the left one.) I did all the updates other YT'ers suggested while using one of Sony's recommended dongles, but it never occurred to me that I should just reinstall my "old" WiFi/BT PCIe adapter (TP-LINK Archer TXE75E) that I uninstalled once I was able to connect my PC to the internet via ethernet cable (my mobo doesn't have built-in BT). Just tried a VR session with that instead of a dongle and didn't have a single tracking issue pop up.
@@GameOnScorpioI replayed Half-Life: Alyx, which was VERY interesting with the tracking problem (the whole Jeff level was particularly stressful). But I’ve been loathe to try any other games because of the issue. Now that I THINK the issue is gone, I’m hoping to try Arizona Sunshine 2.
UPDATE: yes I spent 7-8hours other day trying to connect controllers, went to sleep 4am without success. But after reading some clever comments here the solution was simple. I have wifi antenna, apparently built in bluetooth use it for signal. I moved this antenna very near to controllers and it connected. I did not have ASUS bluetooth adapter connected. Only one controller in SteamVR was shoving virtual laser line, other not. My usb extension cable arrived, I might use it with ASUS bluetooth adapter, will experiment. thanks for sharing your option of making that thing work. My right controller with asus bt500 just won't connect.
Same problem, tried everything, changed couple of bt dongles and at the end its not bt at all. As i suspected problem was poor configuration, prob gpu that was way to old (rx 570🥶) . I play wot occasionally and it was good for that. So i ended up trying on friends pc, r5 5600x, rtx 3070 etc.. Worked like a charm on first try. And picture is more clear than on ps5, almost no blurry. Can only imagine how it looks on high end pc.
I used an Intel AC2960 BT/WiFi card I had in my PC already, I did buy the extension WiFi antenna attachment for it but had a few issues with the 6 dof tracking, 3 dof worked so I knew the BT connection was OK but my hand was getting locked in space. What I eventually realised was that where my PC is there was a lot of (unexpected) sunlight coming in the window and probably overpowering the IR tracking LEDs on the controllers. Closing the blind got rid of this and no more stuck hands.
I bought the asus 500 and i Havent Even used them yet. My computers Bluetooth works great. Snd most my steam games and meta games work great. The only thing i have had a problem with is the pcvr mods from resident evil. Crazy lag and stuttering when i play. Ive spent tons of hour's on these mods with my quest 2 and 3 so dont get why the psvr2 struggles. I need to know which settings to turn down
Odd that the PSVR2 struggles when the Quest 2 and 3 don't... I suspect the PS app on steam might be the issue, as I believe it is technically in "beta", but I could be wrong
@GameOnScorpio ok so I got it to run better. I had to go and tinker with the in-game settings and turn things down. For some reason quite a few of the graphical settings were on high. Which is weird because when I play with my quest 2 and 3 i turned them down to get decent gameplay. Either way I guess I just had to adjust them again because re7 and re2 are working great now.
Got the adapter yesterday and connected controllers directly using Bluetooth on the motherboard but kept losing connection. Couldn’t wait to play so bought an Argos usb dongle for £9.99 and tried it out. Able to connect both controllers but the laser pointer doesn’t show. Read in one of the comments to connect it to MB Bluetooth then once you get past the part on psvr app that detects the controllers, you can connect it via usb c cable directly to pc. This worked for me and no tracking issues however cables are quite short. Not sure what permanent fix would be either buy two 5m cables or spend money on this ax3000 but not sure how to install it on my itx motherboard
Did you manage to solve it? I have the same problem with my UGREEN 5.3 bluetooth, the controls connect but the lasers and controls do not appear on the headset
The ASUS dongle is the best from the suggested Sony adapters. These should be used with a USB 2.0 port with an extension cable. Although the Microsoft Drivers are working, SteamVR should not crash when the Manufacturer Bluetooth drivers are installed.
@@charlesknight2876 Bluetooth dongles work more reliably when connected to a USB 2.0 port. Although it does work with a USB 3.0 port, it is not as stable because of interference so the recommendation is to keep the dongle further away from the computer and nearer to the play area. Most computers do not have a USB 2.0 port at the front, so you could also use the extension cable from the back USB 2.0 ports.
I bought the same one you did, same issues. I bought the asus bt500 and connected them but haven't had much time to test yet. But from seeing other people's comments I think i'll be fine now. Annoying, but at least the adapter that doesn't work was only $15 or whatever.
I picked up a PSVR2 while I wait for my pre-orders of the Pimax Crystal Super and the Somnium VR-1. Only reason I did was because my Index now has a dead pixel and it's annoying. Even though I have 4 2.0 base stations setup in my room... unfortunately, the PSVR2 is not compatible with those. However... it is compatible with the Vive 3.0 trackers. I ended up picking up 4 of those and it has fixed my tracking issues. Granted, not everyone will go this route due to cost.
I've had tracking issues with the asus USB bt500, TP Link. Used asus first. The USB dongle and plugged to 2.0 helped alot but still get the lh controller floating still rotates axis but does not move up down front back. Tp link same result. Tried a few different things to rule out light looks like it may be camera related. But may be bluetooth still.
@ShayDrory you're very welcome. I can confirm that, for me, it is still working. I just finished playing a session of Half-Life Alyx with no tracking issues. I hope that helps!
I don't need the motion controllers because I won't be playing games that use them, but I'm frustrated that I can't get past setup because I have no laser pointers so I can't click the "next" buttons. I purchased this Bluetooth adapter using your affiliate link (you're welcome) and still no laser pointer. The controllers are paired and working (I get vibration and can hop around in steam VR home) but can't actually play any games. Any tips before I throw it all out of the window?
Got the same problem here since day one. Tried extenders, 3 d'ongles, the PCI Express card that IS shown in this video and still can't have these fucking lasers pointers working. Can't click next, can't setup...
is using a usb 3.0 hub with the psvr2 pc adapter and bluetooth adapter bad? im trying to figure out how to make room for all my USBs cuz i dont have that many ports... im having tracking issues with the controllers tho and i think it's most likely bc it's plugged into a usb hub.
@sniperaaronn the PSVR2 PC adapter needs to be plugged into a USB 3 port... the bluetooth adapter can be in a USB 2 port... I tried the bluetooth adapter in a USB hub and directly in my computer and still have tracking issues. For the bluetooth adapter I don't think it matters too much.
My current fix for the issue i was having (could only connect one controller, other did not connect and does not register on the psvr2 app) is that i connected one of the controllers by a long usb-c cable (5m, so it does not limit me). Do you think this could be fixed by purchasing one of these as well? Tbh, playing with the cable does not matter all that much, its just incredible that this is an actual licensed product which does not work. Objectively, it just does not function the way it should and workarounds are necessary.
@petrkalensky7268 I mean, it's a possibility of course but I personally can't guarantee. This is how I fixed my problem. If you disconnect both controllers, are you able to connect the one that wasn't connecting? If both are able to connect separately but not together, then yes, it could be that the bluetooth you currently have for your PC can't cope... but that is pure speculation.
I've a weird issue where the image of the tracking cameras occasionally shift. I can even see it in the pass-trough view, it's super disorienting and annoying when the world randomly shifts for a fraction of a sec.
So weird that a built in Bluetooth signal on a laptop works better than the wifi/Bluetooth antennas on my pc. I had a laptop first and psvr2 adapter worked perfectly aside from low resolution and frame rates but then I upgrade to a mid/high range pc and the antennas has so many issues from like not even 5 feet away lol
Yea it's weird that so many people are having problems when they shouldn't. Sony should have tested this more and come up with a solid solution/product
See, I don't have any tracking issues but what I do have is that while inside the headset, whenever I have SteamVR or any game open, everything has the worst green tint to it and I don't know how to fix it. I've looked and tried everything but same issue. It isn't like this when connected to my PS5 and I'm desperate for help. It seems like no one else is having said issue. :(
@awesomegirl123ish oh very odd indeed. Sadly I have no idea how to fix that either. I'm assuming you've tried the usual things like uninstalling the app and reinstalling it etc?
Just tried the whole weekend with the tp-link ub500, constantly lost tracking , impossible to play games. Sending back today the psvr2 , not willing to buy any more stuff.
I have a good motherboard so it has pcie built in wifi6/bluetooth 5.0 I had zero issues getting this to work with my PC with the pc adapter and psvr 2. I think most people get crappy motherboards so they end up having ot buy dongles because they don't have integrated Bluetooth, and dongles are terrible to say the least.
I have the same PCIE card and am still running into issues (connects fine to windows, but SteamVR shows both controllers as gray). I was wondering how far away from the computer you have the antenna?
I tried to use that little tp-link adapter but god it just sucked, Im getting the same part in your description, not only because I need the wifi and bluetooth, but because if this fixes the problem im having this is gonna replace my old HTC (im not gonna go out and buy replacement parts if the psvr2 can do what it used to)
My Strange story : I bought PC just for PSVR2 to play Half-Life Alyx, Skyrim and so much more. what happend is that I had a bluetooth adapter like more than 5-6 years it was in my old pc. it was 4.0v and somehow it was working perfectly with the controllers. NO TRACKING ISSUES . the only problem was that I hat to reconect the controllers every time I play. it wasn't a problem , just so anoying. and I got tiret of that and bought another adapter - brand "Trust". I don't reconecting the controllersanymore but I've got so mutch tracking issues. like for 10min I've got more than 2 times stoping the movement on one of the controllers. how is this possible. I mian its like the old one is so much better . just the annoying reconecting every time.
Am I the only one that always looks for a motherboard with build-in Wifi and Bluetooth and external antenna? 😅 I have a Asus X570-E Gaming motherboard and it worked out of the box.
I have a Asus X570 TUF Gaming Plus WiFi and it worked beautifully AFTER I installed the bundled antenna which I never installed in my 4 years with it as I always used LAN and controllers wired if any. Without the antenna, it was basically useless.
@TarzanGTI Actually, I have a height adjusting desk from Ikea... an Uppspel. I have my big tower pc case underneath it, and the antenna cable wasn't long enough to put it on the desk. Below the desk, I notice interference with my Sony WH-1000XM3 headphones from I think the powersupply under the desk. One extension cord from a Chineze company on Amazon later, and I have it above the desk, and the interference was resolved. So, I definitely agree that it is best to place the antenna away from electronics. As for the games I usually play... ETS2, ATS, racing simulators. But I might check out other games after the renovation of the house. So I am currently packing everything and putting it away.
@@GameOnScorpio haha yeah I always keep the boxes stored away in my shed for expensive items. I’ve been using it for iRacing primarily and I do think it’ll be my permanent replacement for my dying cable G2 which has been giving me issues, not to mention the upcoming dropped support.
Firstly, the BT standard is literally subject to some of the strictest controls from government certification bodies, where it is impossible to release something so outstanding that buying a separate huge board makes any sense. All chips within one generation of the protocol are literally the same, the differences may be in the implementation of the driver - and only if the manufacturer is an asshole going against the standard. Secondly, this huge board... does not have a different BT module from the one in your micro-dongle. This is literally a cheap board on a cheap chip, like in all laptops of recent years, under a beautiful label with an expensive heatsink, so that the buyer can look at it and think “yes, this looks expensive.” Plus, this board is a wifi+bt hybrid, you pay 90% of the price for its wi-fi module!!! Third, it is not possible to pump more energy into the BT transmitter. Again, because this makes no sense: the transmitters in the controllers cannot supply more watts to their modules than allowed in the standard, and this is already enough to operate at 5-7 meters! The quality of the connection is limited not by the transfer of data from the computer to the controllers, but, on the contrary, by the flow of data from the controller to the computer, and for this the main parameter is not the transmitting power, but the sensitivity of the receiver. The smallest dongle simply cannot accommodate a normal-sized antenna to ensure stable operation in the conditions of the extremely littered 2.4 band, plus they are also stuck in at random, without thinking about what the radiation pattern is. And the same metal computer case easily absorbs a lot of signal, for example, or many ungrounded components around introduce their own interference into the signal, and I’m not even talking about problems with many devices on the same frequency and queues of packets, when a conventional smart home thermometer sends its signals , interrupting the data flow of other devices. Take not a micro-adapter, but the size of a regular flash drive, and a 20-30 cm extension so that you can turn the adapter with the other side towards the playing area - and this will solve all problems in most cases.с
@deadcxap755 please explain why when I used an extension lead to get the small dongle away from everything and literally on my lap, I still had issues... Please also explain, if they are both basically the same, why one works and the other doesn't?
Dam it, that is the same card I installed to fix my issues. Thought it was a little heavy handed and that you would say “a small dongle is ok but update the drivers”. Hopefully Sony fix this for people, because that card is a bit much (I had to buy a replacement for the other computer I pilfered, currently have a cable running though the house until the replacement arrives ).
Well as someone else in the moments mentioned, there could be other interference from devices we have no control over e.g. a neighbours router etc... This is probably why Sony can't guarantee a small dongle will work. Oh, and SNAP! 😂
i must say this is a absolute pisstake from Sony. Having to buy the adapter that is 50-60 quid and then realising that it doesn't work and having to spend MORE money is ridiculous. if they had just sorted this problem by adding it to the adapter in the first place then charging upwards of 50-60 quid personally wouldn't be a problem. Glad to play VR on PC somewhat but what a pisstake.
Do not buy wifi6e cards for installation in your computer, because Windows does not know how to create networks with wide bandwidth in the ax standard and does not know how to work with the 6 GHz frequency at all.
Ok so I get this stupid black message box that pops up constantly telling me it can’t detect my surroundings. My controller is connected via usb, not Bluetooth. My headset is clearly connected through the pc adapter. So nothing is using Bluetooth and I still get issue with this thing not being able to track my surroundings. I have infrared lights installed in the room as well. I’m at a loss here. Works on ps5 just lots of problems on my pc. That said, it’s a brand new pc and has Bluetooth built in.
@skltr21 I'm sorry to hear you're having issues and that does sound odd. This might be a silly thing, but have you tried cleaning the sensors/cameras on the outside? I know you said it works on PS5 but you never know. Have you tried deleting your old play space and creating a new one?
Are you having tracking issues with your controllers? Did you get it working fine with a bluetooth dongle? Let me know!
No, but my PC doesn't see controllers at all. Even though I have Bluetooth 5.0, all drivers are up to date and controllers are charged
@garrukthewildspeaker262 is your bluetooth a dongle or built in?
Sorry for this next question but I have to ask... have you just opened the PSVR2 app on steam and expected them to appear or have you paired then via Windows?
@@GameOnScorpio I have a gigabyte b650 gaming motherboard with a built-in Bluetooth adapter. And yes, I'm trying to pair it via Windows. I press the share + ps button until it's blinking, but my Bluetooth doesn't see controllers.
It can see other devices such as headphones, wireless keyboards etc. And the controllers work fine with my PS5.
And I turn the PS5 off when I try to pair them to the PC.
I reinstalled Bluetooth drivers and updated the drivers on the controllers.
@@garrukthewildspeaker262 Oh very odd... I just looked that MB up and it's BT 5.2 so should be fine... the headphones, wireless keyboard etc that you mentioned... are they bluetooth or just wireless with their own dongles though?
Hopefully you're able to figure it out soon!
@@GameOnScorpio they're blootooth. So yeah, very odd.
I tried Tp-link UB500 with 1 meter extension cable, and it didn’t fix the tracking issue.
TP-link UB500 with 3 meter extension cable plug in the USB2.0 , and it works perfectly.
@@iamrobbie1111 glad to hear you were able to get it sorted just with a longer extension cable!
What PCVR games have you been playing?
@@GameOnScorpio half-alyx, Beat Saber, Synthriders
@@iamrobbie1111 nice choices! I've been playing some Ghosts of Tabor... love that game haha
Thanks for the tip, with the TP Link UB500 and 3 meter extension in USB2.0 it now works perfectly.
All these fixes did not work for me. So i bought a ASUS BT500 instead, works perfectly.
@@AstroCreep1984 I'm glad to hear you were able to get it working with the ASUS BT500!
What PCVR games have you been playing?
The ASUS BT500 did the job completely reliably from the beginning. I have played all kinds of games.
@@74amazing glad to hear you've got it working well!
i also have the bt 500 and it is way worse for me
so get this
i just finished setting up my psvr2 for my computer and in probably less than 15 minutes my game (recroom) AND STEAMVR crashed
and i also had controller freezes and 6dof not working (somtimes) so it is not so buttery smooth for some people
@@74amazingcan I plug it in any usb port?? Or a certain one?
I solved all my issues with tracking by buying an USB extension cable and instead of using the TP-Link adapter, swap that piece of shit for the ASUS USB-BT500 dongle.
Just now played Half Life Alyx until the battery of the controllers were empty. No tracking issues anymore!
@@DJAltæir glad to hear you were able to get it working with a different dongle and an extension lead.
First time playing HLA?
There are so many reasons Bluetooth could be struggling. For most people having problems with it, I think it's likely because their Bluetooth just isn't setup or updated properly (because they've never actually used it before). A lot of people don't even know their built-in Bluetooth needs antennas plugged in to work.
A lot of TH-camrs are giving lousy advice to use those tiny dongles in all cases rather than fixing the existing built-in Bluetooth. You've got it right that this will generally be inferior. You should really only use those dongles if your PC has no Bluetooth to begin with or as a last resort if you really can't get your built-in Bluetooth to work.
Your solution I think brings up the nice thing about the PC adapter using the PC's Bluetooth support. You can provide your own much more powerful Bluetooth hardware if you need to. Most people probably will not need a beast like you bought. But the option is available.
As to why you need it? Based on what you described, I think you're dealing with 2.4GHz interference. You mentioned turning off other devices, but the source could potentially be farther away like neighbors with powerful wireless routers or something. It can even be coming from sources other than WiFi gear.
This is also why Sony can't guarantee that whatever Bluetooth hardware you choose will necessarily work. Sony doesn't have control over the user's Bluetooth setup nor their RF environment. Unlike consoles, in PC land you are expected to provide your own working PC. Sony's list of Bluetooth devices is just suggestions for adapters they have specifically tested with that are known to work. A lot of TH-camrs have misunderstood that and think it means _only_ those adapters are compatible.
This is valid, but if this is mostly down to interference, why is it always the same controller, and why doesn't the proximity to the BT dongle matter in this case? (I turn around 180 degrees, still same controller gets lost, I hold it next to the dongle looking at it with the headset cameras, tracking still drops, etc.)
Motherboard BT support is pretty basic, bandwith is small too. For example you can only use 1 playstation controller (ps4/5), but with an tplink ub500 you can use 2-3 easly.
I was one of those people that didn't know I needed an antenna connected to make it work. Plugged mine up to my Gigabyte Aurus and it now works flawlessly.
@@BLITZandKILL Did you plug in the antenna that came with the MoBo? I also have a Gigabyte Aorus that came with the WiFi antenna and I'm thinking of maybe connecting that to my PC and see if anything changes
Edit: God damn, it fixed everything! It works perfectly now, thank you so much! Didn't even need to buy anything new
@ glad you got it working. Yepp just plugged the included WiFi antenna in.
Sony should have provide all the necessary tools from the start...
Man, you have to buy the adaptor, then the bluetooth and you still need and extra cable to connect to the graphics card.
And there's still a chance something goes wrong because pc stuff...
But from what I've played so far, I gotta say Half Life Alyx is an amazing game.
Yea it could have been handled better for sure, and if providing more stuff meant it cost more, we would have still paid it...
Glad to hear you're enjoying HLA!
Jump through every hoop it’s still far cheaper than most headsets and works and looks better than the meta 3.
My Asus B550 motherboard came with a WiFi 6 antenna which also has Bluetooth and I use it all the time for connecting Xbox controllers and Bluetooth ANC headphones. I don't have a PSVR 2 yet but plan to grab it if it goes back on sale. Hopefully I'm able to connect out of the box. Glad you figured it out!
Yes hopefully the sale comes back. We were all hoping that would be the new normal prices... hopefully soon!
I have the same motherboard and I have issues with tracking
@@amadex123 are you using an antenna?
I also have issues connecting both controllers with the same mobo, so don't hold your breath
@@andrewsheldon604 i have the rog strix b-550 wifi 2 which has bluetooth 5.2 controllers won't track good enough to even setup my play area. it just keeps bugging out.
Thanks much for the tip. Two details that are important. One, only one controller can be on for the firmware update to not turn off the controller at 28%. Two, to turn off the controller you have to hold down the PS symbol button for about 15 seconds. There is a little white light on the bottom when the controller is on. I was failing because I didn't realize the other controller wasn't actually turned off.
@@jamesgould7417 interesting and good to know! I didn't know that either! Thanks for sharing!
Ended up going the same route with pcie Bluetooth/ WiFi pcie card. My tp500 didn’t work consistently either. But after installing card, no more tracking issues.
@@johnybravo7034 glad to hear you were also able to fix it this way. What PCVR games have you been playing?
Bandwidth is king. Glad you got it sorted! A solid rationale for a solid fix.
I'm looking forward to trying PCVR titles I've tried in the past and seeing and experiencing them all over again!
I’m currently using the same TP link and it works 90% of the time. Only occasionally I get the locked left hand crap.
But at them moment I hardly use the controllers. I have been hooked on StarWars Squadrons with a flight stick. Absolutely incredible in Vr
@joshd108 yes that's a game I'll be going back to play for sure!
Tracking for me has been flawless (as in literally flawless, no dropouts, locking in place like some users have suffered from) with the TP-Link dongle. It's on an old USB extension cord that I used to use back in the CV1 days to extend a sensor., about 1.5m away from my PC. My major hurdle was getting the PS App to finish the overall setup process in the first place, but since then, no issues.
On the other hand, I know Gary(immersed Robot) has been suffering tracking issues using the same dongle.
It's good that you found a solution that works for you, but having to drop the same price again as the adapter cost in the first place to get it working... It's been a poor show from Sony really.
@FlukeRogi as mentioned in someone else's comment, there could be interference from devices from neighbours etc... something I didn't think about.
Yes, I shouldn't have to spend more money to get the product working and something I've mentioned before is that Sony should have provided something that would guarantee (as much as possible) a seamless experience...
The TPLink worked fine for me AFTER I used a 1m extension cable to get it away from the PC case. Certainly didn't need to buy an Ax3000!
I bought the same when the built in Bluetooth adapter on my laptop did not work. Sad thing it doesn’t run on my laptop (for obvious reasons) but works perfect on my desktop machine👍👍
It's the one I use and works perfectly. It's down in price on amazon right now. Also you can pay £14 a month for 3 months. So you probably won't even miss the money going out. It's down from £49 to £41 right now. Hope this helps anyone who is interested. I saw your link in the description so I looked and was pissed it was down in price seeing as I have only has it 2 weeks myself. I can't be bothered to send it back for £8. I'm not saying that £8. Is nothing but I would be able to play with my headset until I sorted it out lol. Love your videos keep up the good work.
@@vidiatorUK thank you very much!
Any idea if it would work on an ITX motherboard?
@@keithdanmendoza2559 if you have a free PCIe slot then it should, but when it comes to fitting new parts into a computer, you need to know your PC, it's parts as everyone's is different.
Thank you. I've been having non-stop controller tracking issues (it was always the right one, then it suddenly was always the left one.) I did all the updates other YT'ers suggested while using one of Sony's recommended dongles, but it never occurred to me that I should just reinstall my "old" WiFi/BT PCIe adapter (TP-LINK Archer TXE75E) that I uninstalled once I was able to connect my PC to the internet via ethernet cable (my mobo doesn't have built-in BT). Just tried a VR session with that instead of a dongle and didn't have a single tracking issue pop up.
@mikeyca fantastic! Glad you were able to get it sorted! Good thing you kept your old PCIe adapter haha
What VR games gave you been playing with it?
@@GameOnScorpioI replayed Half-Life: Alyx, which was VERY interesting with the tracking problem (the whole Jeff level was particularly stressful). But I’ve been loathe to try any other games because of the issue. Now that I THINK the issue is gone, I’m hoping to try Arizona Sunshine 2.
@mikeyca if you've not played Arizona Sunshine 2 before, you're going to love it! A great game!
Can confirm that the hardware recommended in this video fixed my controllers connectivity issues.😊
Woohoo! Glad to hear it fixed it for you!
Game On!
UPDATE: yes I spent 7-8hours other day trying to connect controllers, went to sleep 4am without success. But after reading some clever comments here the solution was simple. I have wifi antenna, apparently built in bluetooth use it for signal. I moved this antenna very near to controllers and it connected. I did not have ASUS bluetooth adapter connected. Only one controller in SteamVR was shoving virtual laser line, other not. My usb extension cable arrived, I might use it with ASUS bluetooth adapter, will experiment.
thanks for sharing your option of making that thing work. My right controller with asus bt500 just won't connect.
You're very welcome. I hope you're able to fit your issue. When you do, please come back to let others know what you did to resolve it!
Same problem, tried everything, changed couple of bt dongles and at the end its not bt at all. As i suspected problem was poor configuration, prob gpu that was way to old (rx 570🥶) . I play wot occasionally and it was good for that. So i ended up trying on friends pc, r5 5600x, rtx 3070 etc.. Worked like a charm on first try. And picture is more clear than on ps5, almost no blurry. Can only imagine how it looks on high end pc.
It's been two weeks since you posted this video.
Have you had any problems with the TX3000e while playing? Did it really solve the problem?
@denniscanonicodefreitas8072 I was playing Ghosts of Tabor today with it and I had no issues
I used an Intel AC2960 BT/WiFi card I had in my PC already, I did buy the extension WiFi antenna attachment for it but had a few issues with the 6 dof tracking, 3 dof worked so I knew the BT connection was OK but my hand was getting locked in space. What I eventually realised was that where my PC is there was a lot of (unexpected) sunlight coming in the window and probably overpowering the IR tracking LEDs on the controllers. Closing the blind got rid of this and no more stuck hands.
Yes! That's something a lot of people forget about but I'm glad you were able to figure it out and get it working!
I bought the asus 500 and i Havent Even used them yet. My computers Bluetooth works great. Snd most my steam games and meta games work great. The only thing i have had a problem with is the pcvr mods from resident evil. Crazy lag and stuttering when i play. Ive spent tons of hour's on these mods with my quest 2 and 3 so dont get why the psvr2 struggles. I need to know which settings to turn down
Odd that the PSVR2 struggles when the Quest 2 and 3 don't... I suspect the PS app on steam might be the issue, as I believe it is technically in "beta", but I could be wrong
@GameOnScorpio ok so I got it to run better. I had to go and tinker with the in-game settings and turn things down. For some reason quite a few of the graphical settings were on high. Which is weird because when I play with my quest 2 and 3 i turned them down to get decent gameplay. Either way I guess I just had to adjust them again because re7 and re2 are working great now.
@@basketcas3717 Glad to hear you got them running better!
Is there any difference between the AX3000 with Bluetooth 5.0 and the one with Bluetooth 5.2? Do both work?
To my understanding they are the same product. Whilst the box says 5.0, after a firmware update it became 5.2
the ASUS BT500 works perfectly for me. Do not get the TP link.
Very helpful. I saw that there are 2 versions, V1 and V2. Do you know what version is yours? Thanks in advance!
2 versions for what? The PSVR2 adapter, the TP-Link usb dongle or the PCI-e card?
@@GameOnScorpio Sorry my mistake. For the Pci-e card
@@mikeplatis1145 Version 1.0
@@GameOnScorpio Thanks you!!!
Got the adapter yesterday and connected controllers directly using Bluetooth on the motherboard but kept losing connection. Couldn’t wait to play so bought an Argos usb dongle for £9.99 and tried it out. Able to connect both controllers but the laser pointer doesn’t show.
Read in one of the comments to connect it to MB Bluetooth then once you get past the part on psvr app that detects the controllers, you can connect it via usb c cable directly to pc.
This worked for me and no tracking issues however cables are quite short.
Not sure what permanent fix would be either buy two 5m cables or spend money on this ax3000 but not sure how to install it on my itx motherboard
Did you manage to solve it? I have the same problem with my UGREEN 5.3 bluetooth, the controls connect but the lasers and controls do not appear on the headset
The ASUS dongle is the best from the suggested Sony adapters. These should be used with a USB 2.0 port with an extension cable. Although the Microsoft Drivers are working, SteamVR should not crash when the Manufacturer Bluetooth drivers are installed.
Why are people recommending the extension cable? Where do you place your adapter while playing?
@@charlesknight2876 Bluetooth dongles work more reliably when connected to a USB 2.0 port. Although it does work with a USB 3.0 port, it is not as stable because of interference so the recommendation is to keep the dongle further away from the computer and nearer to the play area. Most computers do not have a USB 2.0 port at the front, so you could also use the extension cable from the back USB 2.0 ports.
@@tauheedulali2652 alright I see move them closer and reduce interference thank you!
I bought the same one you did, same issues. I bought the asus bt500 and connected them but haven't had much time to test yet. But from seeing other people's comments I think i'll be fine now. Annoying, but at least the adapter that doesn't work was only $15 or whatever.
@jhager1 yea, it seems a lot of people have no issues with the ASUS one!
Fingers crossed!
I picked up a PSVR2 while I wait for my pre-orders of the Pimax Crystal Super and the Somnium VR-1. Only reason I did was because my Index now has a dead pixel and it's annoying. Even though I have 4 2.0 base stations setup in my room... unfortunately, the PSVR2 is not compatible with those. However... it is compatible with the Vive 3.0 trackers. I ended up picking up 4 of those and it has fixed my tracking issues. Granted, not everyone will go this route due to cost.
Very interesting!
Seeing as you already play a lot of PCVR, what's your go to game?
I sent my TP-Link back and just got the ASUS, will be trying it later today.
@@ParadiseDecay yes I'll be sending my TP-Link back also. I have no need for it now
Do you mean the ASUS USB-BT500? If so, please let us know the results.
I've had tracking issues with the asus USB bt500, TP Link. Used asus first. The USB dongle and plugged to 2.0 helped alot but still get the lh controller floating still rotates axis but does not move up down front back. Tp link same result. Tried a few different things to rule out light looks like it may be camera related. But may be bluetooth still.
@@jasonmcclelland24151 This is the exact issue I had!
@@Afthrast tried this and its giving me issues
the same issues everyone else is having
Thanks for the video and recommendation. I'm considering buying this but before I do can you confirm it is still working for you after 2 days?
Thanks!
@ShayDrory you're very welcome. I can confirm that, for me, it is still working. I just finished playing a session of Half-Life Alyx with no tracking issues.
I hope that helps!
@@GameOnScorpio Wonderful, I'll get one then. Thanks and happy playing 😊
@@ShayDrory please come back and let me know it works for you fine!
Game On!
@@GameOnScorpio It did indeed!
@@ShayDrory fantastic!
I don't need the motion controllers because I won't be playing games that use them, but I'm frustrated that I can't get past setup because I have no laser pointers so I can't click the "next" buttons.
I purchased this Bluetooth adapter using your affiliate link (you're welcome) and still no laser pointer. The controllers are paired and working (I get vibration and can hop around in steam VR home) but can't actually play any games.
Any tips before I throw it all out of the window?
Got the same problem here since day one. Tried extenders, 3 d'ongles, the PCI Express card that IS shown in this video and still can't have these fucking lasers pointers working. Can't click next, can't setup...
I have this same AX3000 , but mine says 'Bluetooth 5.2' on the box?
Is it working ok with the PCVR Adapter?
@@Marcos10810 I've not bought the PC PSVR2 adapter yet as I currently only have an Nvidia 980Ti .
So I'm currently just using the PSVR2 with my PS5.
is using a usb 3.0 hub with the psvr2 pc adapter and bluetooth adapter bad? im trying to figure out how to make room for all my USBs cuz i dont have that many ports... im having tracking issues with the controllers tho and i think it's most likely bc it's plugged into a usb hub.
@sniperaaronn the PSVR2 PC adapter needs to be plugged into a USB 3 port... the bluetooth adapter can be in a USB 2 port...
I tried the bluetooth adapter in a USB hub and directly in my computer and still have tracking issues. For the bluetooth adapter I don't think it matters too much.
I'M using intel BE200 Wi-Fi 7 with BLE5.4 and no tracking issues at all!
@@cia4gent128 awesome! What games have you been playing?
what if the mobo is high end z790 is it enough for built in Bluetooth ?
Some people have had no issues with their built in bluetooth, so worth giving a go!
At last, i have a solution ... Thanks a lot !!!
@@zamzamfrompat9808 I hope it works for you!
My current fix for the issue i was having (could only connect one controller, other did not connect and does not register on the psvr2 app) is that i connected one of the controllers by a long usb-c cable (5m, so it does not limit me). Do you think this could be fixed by purchasing one of these as well? Tbh, playing with the cable does not matter all that much, its just incredible that this is an actual licensed product which does not work. Objectively, it just does not function the way it should and workarounds are necessary.
@petrkalensky7268 I mean, it's a possibility of course but I personally can't guarantee. This is how I fixed my problem. If you disconnect both controllers, are you able to connect the one that wasn't connecting?
If both are able to connect separately but not together, then yes, it could be that the bluetooth you currently have for your PC can't cope... but that is pure speculation.
I've a weird issue where the image of the tracking cameras occasionally shift. I can even see it in the pass-trough view, it's super disorienting and annoying when the world randomly shifts for a fraction of a sec.
@PenguinYayOne that is weird! I've not experienced that myself. Have you done PCVR before with other headsets or is this the first time?
@@GameOnScorpio It's my first time. As far as I can tell, it seems to be normal on PS5.
@@PenguinYayOne what are your PC specs?
@@GameOnScorpio 5800x3D, RTX 4090, 64G RAM and the game is on an NVME SSD
@@PenguinYayOne Not your PC then haha... I suspect that the PSVR2 app on Steam might be the issue, but that's just speculation...
So weird that a built in Bluetooth signal on a laptop works better than the wifi/Bluetooth antennas on my pc. I had a laptop first and psvr2 adapter worked perfectly aside from low resolution and frame rates but then I upgrade to a mid/high range pc and the antennas has so many issues from like not even 5 feet away lol
Yea it's weird that so many people are having problems when they shouldn't. Sony should have tested this more and come up with a solid solution/product
Mine worked perfectly with the built-in wifi/BT card on my PC. Nano adapters are garbage.
See, I don't have any tracking issues but what I do have is that while inside the headset, whenever I have SteamVR or any game open, everything has the worst green tint to it and I don't know how to fix it. I've looked and tried everything but same issue. It isn't like this when connected to my PS5 and I'm desperate for help. It seems like no one else is having said issue. :(
@awesomegirl123ish oh very odd indeed. Sadly I have no idea how to fix that either.
I'm assuming you've tried the usual things like uninstalling the app and reinstalling it etc?
Just tried the whole weekend with the tp-link ub500, constantly lost tracking , impossible to play games. Sending back today the psvr2 , not willing to buy any more stuff.
I have a good motherboard so it has pcie built in wifi6/bluetooth 5.0 I had zero issues getting this to work with my PC with the pc adapter and psvr 2. I think most people get crappy motherboards so they end up having ot buy dongles because they don't have integrated Bluetooth, and dongles are terrible to say the least.
Glad to hear you're having no issues with your built in Bluetooth.
What PCVR games have you been playing?
interesting i bought x3000 long time ago for other peripherals due to the house i was living in atm
I have the same PCIE card and am still running into issues (connects fine to windows, but SteamVR shows both controllers as gray). I was wondering how far away from the computer you have the antenna?
I tried to use that little tp-link adapter but god it just sucked, Im getting the same part in your description, not only because I need the wifi and bluetooth, but because if this fixes the problem im having this is gonna replace my old HTC (im not gonna go out and buy replacement parts if the psvr2 can do what it used to)
Please come back and let me know once it arrives to let me and others know of this also resolves the tracking issues for you.
Fingers crossed 🤞
@@GameOnScorpio IT FUCKING WORKS, PLAYED TILL THE CONTROLLERS DIED AND NEVER LOST TRACKING
@@jojoke2909 WOOHOO!!!!
What did you play?
@@GameOnScorpio just some HL:A maps, whatever was trending on the workshop
TYVM...good info to know
@@henrymonroy9533 you're very welcome!
Are you currently having tracking issues?
@@GameOnScorpio I do not have the adapter yet, so no, but I am better informed when I do.
@@henrymonroy9533 I like that you said "yet"! Haha
My Strange story : I bought PC just for PSVR2 to play Half-Life Alyx, Skyrim and so much more.
what happend is that I had a bluetooth adapter like more than 5-6 years it was in my old pc.
it was 4.0v and somehow it was working perfectly with the controllers. NO TRACKING ISSUES . the only problem was that I hat to reconect the controllers every time I play. it wasn't a problem , just so anoying. and I got tiret of that and bought another adapter - brand "Trust". I don't reconecting the controllersanymore but I've got so mutch tracking issues. like for 10min I've got more than 2 times stoping the movement on one of the controllers. how is this possible. I mian its like the old one is so much better . just the annoying reconecting every time.
Yea that is very odd. Does your new one come with antennas? If so, are they connected?
Am I the only one that always looks for a motherboard with build-in Wifi and Bluetooth and external antenna? 😅
I have a Asus X570-E Gaming motherboard and it worked out of the box.
@LogiForce86 I think any motherboard in future that I upgrade to, I will also be looking for these to be built in! Haha
I have a Asus X570 TUF Gaming Plus WiFi and it worked beautifully AFTER I installed the bundled antenna which I never installed in my 4 years with it as I always used LAN and controllers wired if any.
Without the antenna, it was basically useless.
@TarzanGTI glad you were able to use your built in Bluetooth! Good thing you knew where that antenna was!
What PCVR games have you been playing?
@TarzanGTI Actually, I have a height adjusting desk from Ikea... an Uppspel. I have my big tower pc case underneath it, and the antenna cable wasn't long enough to put it on the desk. Below the desk, I notice interference with my Sony WH-1000XM3 headphones from I think the powersupply under the desk.
One extension cord from a Chineze company on Amazon later, and I have it above the desk, and the interference was resolved.
So, I definitely agree that it is best to place the antenna away from electronics.
As for the games I usually play... ETS2, ATS, racing simulators. But I might check out other games after the renovation of the house. So I am currently packing everything and putting it away.
@@GameOnScorpio haha yeah I always keep the boxes stored away in my shed for expensive items.
I’ve been using it for iRacing primarily and I do think it’ll be my permanent replacement for my dying cable G2 which has been giving me issues, not to mention the upcoming dropped support.
Firstly, the BT standard is literally subject to some of the strictest controls from government certification bodies, where it is impossible to release something so outstanding that buying a separate huge board makes any sense. All chips within one generation of the protocol are literally the same, the differences may be in the implementation of the driver - and only if the manufacturer is an asshole going against the standard.
Secondly, this huge board... does not have a different BT module from the one in your micro-dongle. This is literally a cheap board on a cheap chip, like in all laptops of recent years, under a beautiful label with an expensive heatsink, so that the buyer can look at it and think “yes, this looks expensive.” Plus, this board is a wifi+bt hybrid, you pay 90% of the price for its wi-fi module!!!
Third, it is not possible to pump more energy into the BT transmitter. Again, because this makes no sense: the transmitters in the controllers cannot supply more watts to their modules than allowed in the standard, and this is already enough to operate at 5-7 meters! The quality of the connection is limited not by the transfer of data from the computer to the controllers, but, on the contrary, by the flow of data from the controller to the computer, and for this the main parameter is not the transmitting power, but the sensitivity of the receiver. The smallest dongle simply cannot accommodate a normal-sized antenna to ensure stable operation in the conditions of the extremely littered 2.4 band, plus they are also stuck in at random, without thinking about what the radiation pattern is. And the same metal computer case easily absorbs a lot of signal, for example, or many ungrounded components around introduce their own interference into the signal, and I’m not even talking about problems with many devices on the same frequency and queues of packets, when a conventional smart home thermometer sends its signals , interrupting the data flow of other devices.
Take not a micro-adapter, but the size of a regular flash drive, and a 20-30 cm extension so that you can turn the adapter with the other side towards the playing area - and this will solve all problems in most cases.с
@deadcxap755 please explain why when I used an extension lead to get the small dongle away from everything and literally on my lap, I still had issues...
Please also explain, if they are both basically the same, why one works and the other doesn't?
Everything works but graphics settings are driving me insane 🙃 how is this a thing? Nothing is easy on pc .
my headset wont track surroundings
Yeah I have no problems with tracking due to the Bluetooth 5.0 on my aorus motherboard
Glad to hear no issues your end!
What PCVR games have you been enjoying?
it's worse than my intergrated bluetooth lol
Dam it, that is the same card I installed to fix my issues. Thought it was a little heavy handed and that you would say “a small dongle is ok but update the drivers”. Hopefully Sony fix this for people, because that card is a bit much (I had to buy a replacement for the other computer I pilfered, currently have a cable running though the house until the replacement arrives ).
Well as someone else in the moments mentioned, there could be other interference from devices we have no control over e.g. a neighbours router etc...
This is probably why Sony can't guarantee a small dongle will work.
Oh, and SNAP! 😂
i must say this is a absolute pisstake from Sony. Having to buy the adapter that is 50-60 quid and then realising that it doesn't work and having to spend MORE money is ridiculous. if they had just sorted this problem by adding it to the adapter in the first place then charging upwards of 50-60 quid personally wouldn't be a problem.
Glad to play VR on PC somewhat but what a pisstake.
Yea I feel they could have shipped a more well rounded product to support more people. We would have all been happy with the extra price
Great video! might have to upgrade to one of those at somepoint. maybe even a Wifi 6 E as a dedicated bluetooth and wifi device for the Q3
Thank you very much! Actually, one of the things I plan to test now is creating a wifi hot-spot for my Q3 and VD...
@GameOnScorpio awesome, I look forward to it! I think dedicated router is the key to the best Wireless Q3 experience
Do not buy wifi6e cards for installation in your computer, because Windows does not know how to create networks with wide bandwidth in the ax standard and does not know how to work with the 6 GHz frequency at all.
@GoneHollowMedia it is indeed and I do have a dedicated router setup for it, I just like to play around and test things
How do you even get one of these fucking devices? I was able to get a PSVR2 on launch day, but the PSVR2 adapater sold out instantly. 😭
@omgitsbees I was lucky enough to be able to grab one off Amazon. Hopefully you'll be able to pick one up soon!
As always Playstation screwing up customers experience once again.
If Sony had provided their own dongle which was dedicated to the controllers, even if it put the price up, people would still have paid...
Oh well...
Tomato tomato, pointless
Ok so I get this stupid black message box that pops up constantly telling me it can’t detect my surroundings. My controller is connected via usb, not Bluetooth. My headset is clearly connected through the pc adapter. So nothing is using Bluetooth and I still get issue with this thing not being able to track my surroundings. I have infrared lights installed in the room as well. I’m at a loss here. Works on ps5 just lots of problems on my pc. That said, it’s a brand new pc and has Bluetooth built in.
@skltr21 I'm sorry to hear you're having issues and that does sound odd.
This might be a silly thing, but have you tried cleaning the sensors/cameras on the outside? I know you said it works on PS5 but you never know.
Have you tried deleting your old play space and creating a new one?
@@GameOnScorpio yeah I’ve created the play area so many times