Very nice job. I can't believe the way some people beat on those tightening arms. If they need that much jaw pressure they probably need a bigger vise.
Nice green color. You left out a lot of details in the video. Vise turned out nice, but what's up with the hole in the middle of the anvil surface? Thanks for your effort with the video
Should have welded on the handle collar so it's not so floppy. Although, I suppose that small diameter rod will act as a shear pin and will prevent anyone bending up the handle by over tightening in the future.
DANG! It looks like the previous owner needed a bigger vice! Yes,needed a vice to fix my vice. This my 4th vice restoration video today. I guess that I'm hooked.
Совершенно варварский способ восстановления тисков. У меня подобные тиски. И они также нуждаются в реставрации. И вы посказали мне как не надо делать. Поэтому лайк!!!
Братан, BL, ну почему ты красишь детали без грунтовки, какой видос уже смотрю, нигде грунтовку при покраске не используешь, она же за быстрое время слезет, но если у тебя краска вместе с орутновкрй, то не отвечай на комментарий, а просто лайкни) удачи, молодец!
Looks like soviet vise. "Тисочки настольные ТУ 2-17-302-81" (Bench vise Technical conditions (ТУ) 2-17-302-81 is the name of this vise, i think. I've got very similar one.
You can use white vinegar with sodium bicarbote solution. Inmerse the metal for 2 to 3 days in the solution and will be clean. No need of electricity. There is a videa on that system. Look for VINEGAR...
I often see these videos and wonder why many of the restorers choose not to use a primer before putting on a color coat. I always watched my dad prime parts that were going to later receive paint. Just curious.
Кто как хочет так и..... .делает. от ржавчины почистил и будя. Хотя наверно чем в такую каковы иструмент превратил (впереди,ы остановились без напряга . Все в ржавчине будто специально в химии держал. Покраска фигня, но почему резьбы и трущиеся поверхности не смазал ??? Смазки нет? Ну и использовать губки больших токов в качестве наковальни - функции.
Nice job using only basic hand tool. Very well done. I salute you, sir.
Fantastic just fantastic stay safe and make
To disfigure the screw lever in such a way, someone really hated this small vice. It’s good that the vice got your good hands.
Well done job.
Чудова робота!
Ache kosis ki hay
Super tare 👍👍👍👍💡
Nice tear down and clean up. Beautiful restoration.
NICE JOB !
You did a great job!
Very nice job. I can't believe the way some people beat on those tightening arms. If they need that much jaw pressure they probably need a bigger vise.
you did a wonderful job on it i would recommend using a washer or circlip as a thrust bearing to tighten up the backlash from the handle
Total Thumbs Up ! Beautiful piece of work !
well done , you really have a great feel for this kind of thing
Great work on the "baby"!
You removed old wounds and ... left new ones :( I only give you four stars!
Para mini yunque, eres muy rústico.
Esta pieza era para que quedara con una joya.
Persevera porque o te faltan herramientas o eres rústico.
That came out really nice. Thank you for saving it
Next time make a restoration of your drill ; ) Nice Job.
Nice little video. I could use one like that. Looks really great. Nice work! 👍
Nice green color. You left out a lot of details in the video. Vise turned out nice, but what's up with the hole in the middle of the anvil surface? Thanks for your effort with the video
C O O L !!!
очень хорошие тиски с меня такие есть .
Nicely done.
Hi bro 👋👋👋very good restoration mini vise 👍👍👍
I love vintage tools I subscribed your channel.
Should have welded on the handle collar so it's not so floppy. Although, I suppose that small diameter rod will act as a shear pin and will prevent anyone bending up the handle by over tightening in the future.
bahut aala kam
A vice holding a vice. Imagine that.... haha
Great job
Just found your channel. Subscribed and notified
you need some soft vice jaws so you don't destroy every thing you put in it
gostaria de saber que pó e este que vc usa para tirar a ferrugem e quantos e ligado está energia.?
Very good !!!!
No grease? Is it just me or did I see no grease or oil on this whole restoration. Can't forget that! Besides that you did a good job
Удачно!!!
Lovely vice, nice job.
DANG! It looks like the previous owner needed a bigger vice! Yes,needed a vice to fix my vice.
This my 4th vice restoration video today. I guess that I'm hooked.
Совершенно варварский способ восстановления тисков. У меня подобные тиски. И они также нуждаются в реставрации. И вы посказали мне как не надо делать. Поэтому лайк!!!
Как вообще ума хватило зажимать за направляющую, даже без резины или тряпки?
Восстановил такие же тисочки, кому интересно th-cam.com/video/80aLYR2x-LQ/w-d-xo.html
Should've used a split pin instead of a bolt for guide pin - stronger and smoother
You should have replaced those t handles. They have been weakened by bending them they will bend again
Братан, BL, ну почему ты красишь детали без грунтовки, какой видос уже смотрю, нигде грунтовку при покраске не используешь, она же за быстрое время слезет, но если у тебя краска вместе с орутновкрй, то не отвечай на комментарий, а просто лайкни) удачи, молодец!
Ohh Man!
Looks like soviet vise. "Тисочки настольные ТУ 2-17-302-81" (Bench vise Technical conditions (ТУ) 2-17-302-81 is the name of this vise, i think. I've got very similar one.
👏👏👏👍👍👍
What chemicals and ratios did you use in the solution to dissolve the rust?
You can use white vinegar with sodium bicarbote solution. Inmerse the metal for 2 to 3 days in the solution and will be clean. No need of electricity. There is a videa on that system. Look for VINEGAR...
Is this famous russian technical culture XD!
What was the liquid? What was the powder?
კარგი ვიდეოა ყოჩაღ
Seen so many of these "restoration" videos and they rarely if ever use primer.
What a nastily made vice that is...
Сделано в СССР, цена 3 р. 50 коп. :-D.
Восстановление только для декоративного предмета, как инструмент не годится уже.
I could really use that at work or at home. Want to sell it?
У меня такие есть
Get a glass bead blaster no more crappy mess and waiting for results .
Good
I often see these videos and wonder why many of the restorers choose not to use a primer before putting on a color coat. I always watched my dad prime parts that were going to later receive paint. Just curious.
Great restore. Excellent process. But, uh... 4 commercials? Didn't know you had become so... capitalist?
Наверное это то когда лучше б сгнили чем такой ремонт.
Nice repair but wouldn't call it a restoration.
Кто как хочет так и..... .делает. от ржавчины почистил и будя. Хотя наверно чем в такую каковы иструмент превратил (впереди,ы остановились без напряга . Все в ржавчине будто специально в химии держал. Покраска фигня, но почему резьбы и трущиеся поверхности не смазал ??? Смазки нет? Ну и использовать губки больших токов в качестве наковальни - функции.
У
меня такие же есть достались от деда
Саша Масензовас .какого года?
That is the smallest vise I’ve ever seen!
No olvide restaurar su taladro
if you do, then do it normally. not a good job.
Восстановил такие же тисочки, кому интересно, same type of vise restoration th-cam.com/video/80aLYR2x-LQ/w-d-xo.html
That is NOT how to use a file.
Very sloppy work.
Your file work needs to be a little bit better.
სად ნახულობ ამეებს? ??
How much i want it lol
Тиски тисками испортил. Причем со всех сторон.
Quedo mas aguado que mis calzones.... disculpa no te esforzaste....
Imediaa male dagifasdeba ucxoetshi aset kontentebs milionobit naxva aqvs
Хрень на воротил...... У меня такие же тисочки есть, скоро тоже буду снимать рестоврацию. Но более лучше!
Некрасивая и небрежная работа, впрочем как и все, уже просмотренные работы! Может быть дальше будет интереснее.