Glad to see someone else besides me using a pressure pot, been using them for 30 plus years . I will use a Iwata lph 400 for base coat, but always use a pressure pot for the clear coat, or single stage. Nice job on the project.
Hello I use a binks 2 quart model 80 pot with duel regulators on the pot (no need for the bulky regulator on the gun) but any pressure pot will work fine (devilbiss in good also) I use two different guns one is a Binks mach 1 ls HVLP, also I like the old standby Sharpe model 975 hvlp. I use 8-10 lbs on the pot and between 18-28 lbs on the gun depending what material you are using (some HS clear needs a bit more pressure to get good a good break-up. Once you get used to this system you will like it a lot 100% gun control over trying to balance to cup on a gravity feed gun . no need to fill the pot 2 to 3 times to go around the whole car.
Love my pressure pot, 0.85mm ft ac te20, i use awlgrip and awlcraft paints for big boats!. I love watching a 75ftplus boat go out the door flat n polished 🤙 🤙 🤙 🤙 🤙
Was that primer or topcoat? With pressure pot if you need 65 psi max atomization pressure at the gun, which gun is good for that kinda pressure ? Usual HVLP guns do not withstand pressures more than 40 Psi I believe. Thanks !
![[Live] : ONE FIGHT NIGHT 26 วันนี้!! “คริสเตียน vs อาลิเบก”](http://i.ytimg.com/vi/UlIiZ3t8nHQ/mqdefault.jpg)
got a e 320 looks like grap no dents top clear coats falling off . your the dude ive been thinking hit one time
nice me brother
Glad to see someone else besides me using a pressure pot, been using them for 30 plus years . I will use a Iwata lph 400 for base coat, but always use a pressure pot for the clear coat, or single stage. Nice job on the project.
Gary p can you tell us what kind of setup you have i have been thinking about giving the pressure pot a try
Hello I use a binks 2 quart model 80 pot with duel regulators on the pot (no need for the bulky regulator on the gun) but any pressure pot will work fine (devilbiss in good also) I use two different guns one is a Binks mach 1 ls HVLP, also I like the old standby Sharpe model 975 hvlp. I use 8-10 lbs on the pot and between 18-28 lbs on the gun depending what material you are using (some HS clear needs a bit more pressure to get good a good break-up. Once you get used to this system you will like it a lot 100% gun control over trying to balance to cup on a gravity feed gun . no need to fill the pot 2 to 3 times to go around the whole car.
Great job, love the result
Good man :) on the pot. I love my pressure pot. I am a marine painter. The 0.85mm fluid tip the way forward for atomizing product
beautiful job
Love my pressure pot, 0.85mm ft ac te20, i use awlgrip and awlcraft paints for big boats!. I love watching a 75ftplus boat go out the door flat n polished 🤙 🤙 🤙 🤙 🤙
Was that primer or topcoat? With pressure pot if you need 65 psi max atomization pressure at the gun, which gun is good for that kinda pressure ? Usual HVLP guns do not withstand pressures more than 40 Psi I believe. Thanks !
What air cap and fluid tip do you use with the pro lite for clear coat?
I thought I was going to see my car on your channel 😊
Jazmine Layton Sorry 😘
Jose Hernandez hey, I’ll be bringing my car back to you in the next week ☺️
@@modeybellah I Quit maaco.
Jose Hernandez I know I took my car and you was gone 🤣
can you do a vid on your pressure pot and the settings and how to set it up. I'm really thinking of giving it a try for my single stage job. thanks
Que aguja usas y que tip .
What pressure tank pot is you using to paint your cars
I'm using Debilbiss KBII
@@juyjo014 oh ok thank for telling me this ima get one for painting cars
@@juyjo014 oh ok thank for telling me this ima get one for painting cars
What air cap are you using here
I was using HV40 air cap .
Cual Tu Abuja y changes clueless so fluido
Why don’t you show the finished car after it’s unmasked
Fuck that 1.3 off get a 0.85 trust me you will not go back