Thank you so much for the vid, I was going crazy (for a couple of hours) trying to figure out why my new UPS shipping labels were printing so many blanks. Turns out all I needed to do was calibrate it and I learned that from your video.
I'm so pleased it helped. If you ever find the calibration doesn't work to stop the blanks, physically measure the labels to make sure the size is right. I had some new shipping labels and they were 1mm short than started and it kept skipping labels. Once I entered the correct size, it all worked
Merry Christmas 🎅 keeley have a wonderful time with your family and Holly hope Holly is doing well. Thank you for sharing your videos with us 😊 .Looking forward to 2023 with you 💕💕xx
Thank you Keeley for the update on this fantastic little printer. Wanting to send you and your family the very best of wishes for a wonderful Christmas and a safe and Happy New Year. Enjoy your break and looking forward to the exciting new content in 2023. xx 😘😘🎄🎄🎁🎁🍾🍾🥂🥂✨✨
Thank you for this video. Ive been struggling quite a bit to get a thermal printer that can print any brand of stickers. Do you perhaps know of any other thermal printer or printers that do the same please?
I've found that any thermal printer that loads paper from the back of the machine and does not have an enclosed cavity for a label roll will print any brand. Avoid Brother and dynamo. Some zebras will allow printing on any label but you have to buy the right size core label
Thank you 🧡 I discovered this sometime after getting the machine. It's a shame they don't advise this in their booklet. I have shown how I now load the printer in other videos
The printer does not come with software. I've done another video showing how you can use canva or something like Adobe Illustrator to create labels. I have left links to these videos in this video
Hi again . Ok first thank you again for your reply I did go back and watch the whole video. I then ordered a munbyn . I’m now watching your set up video. Yesterday was a crazy day for me . I was very anxious about the last few steps feeling overwhelmed and like everything might fail . Your reply actually helped to slow my thoughts and let me get focused again . Have a great day 🙂
@@sandramontague4053 Like everything we do for the first time, it can be daunting. Just take it one step at a time and it will come together. The printer is really simple and you are not going to wreck it. The worst that can happen is putting the wrong size label or measurements and wasting a couple of labels. When you get it, read through the booklet first, then start following step by step and you will have it set up in no time and creating your own labels.
Have you ever found Transparent thermal printer labels that are ACTUALLY clear and transparent??? I've ordered this kind TWICE now from amazon but both times they were NOT transparent as their descriptions said. Kind of reminded me of that 'Old' gift wrapping tape years ago that you could easily see taped all over your gift! 😂🙄 I want some transparent 'invisible' labels for glass jars but I'm not having any luck finding these!
Just google direct thermal labels. Plenty of places come up including Amazon and ebay. I don't put in the bio as my links would be Australia and a majority of my viewers are in other countries.
I've been using phomemo. Pm246s is their regular shipping printer that uses usb and pm241bt is their Bluetooth that u can print from your phone wirelessly but still need usb for laptops
![ILLSLICK - KILLSHOT REMIX [FULL VERSION]](http://i.ytimg.com/vi/RIK8RrqIAzE/mqdefault.jpg)
thank you for this! i couldnt figure out how to get a different paper size this was so helpful!!
Thank you for watching. So pleased it helped
Enjoy your break with family it’s well deserved. Look forward to seeing you next year.
Thank you 🧡 I'm very much looking forward to it. Have a great Christmas 🎄
Thank you so much for the vid, I was going crazy (for a couple of hours) trying to figure out why my new UPS shipping labels were printing so many blanks. Turns out all I needed to do was calibrate it and I learned that from your video.
I'm so pleased it helped. If you ever find the calibration doesn't work to stop the blanks, physically measure the labels to make sure the size is right. I had some new shipping labels and they were 1mm short than started and it kept skipping labels. Once I entered the correct size, it all worked
I LOVE WATCHING YOU ON YOU TUBE. I THINK YOU ARE SO TALENTED.
Thank you 🧡 I'm so lucky to do what I do
I am truly grateful for your channel it really inspires me to go out and try my best to accomplish my gold
I'm so happy to hear that as that is why I created this channel🧡
Have a wonderful time off. Thank you for all your hard work. Merry Christmas 🎄 ❤️🎉
Thank you for watching and supporting me 🧡 have a great Christmas
Hope you have a very relaxing and happy break. 🎉❤🎉❤
Thank you 🧡 I'm looking forward to it
Merry Xmas Keeley. Enjoy your time off. Bring on 2023 🎉🎉⭐️
Thank you 🧡 very much looking forward to the break
Merry Christmas Keely!! Have a wonderful holiday break. You deserve it 💕
Thank you 🧡 very much looking forward to it. Have a great Christmas 🎄
Merry Christmas 🎅 keeley have a wonderful time with your family and Holly hope Holly is doing well.
Thank you for sharing your videos with us 😊 .Looking forward to 2023 with you 💕💕xx
Thank you 🧡 hope you have a great Christmas 🎄
Have a great xmas and New Years Keely. Thanks for everything you do and thoroughly enjoy your time off. xx
Thank you for watching and supporting me 🧡 have a great Christmas
Merry Christmas and a safe and Happy New Year
Thank you 🧡 same to you
Thank you!!! I didn't know where the button to calibrate was
Glad I could help!🧡
Thank you so much Keeley! Merry Christmas ❤❤❤
Thank you 🎄 hope you have a wonderful Christmas and New Year
Merry Christmas Keely and all
Thank you 🎄🎅
what maximum length you can print on munbyn printer and what if have a continuous roll, as i saw an option with no gap
I've not tried printing long labels sorry and I don't have any continuous rolls to try. You may need to contact Munbyn directly to ask them
Merry Christmas Keeley.
Thank you 🎄🎅
I WATCH YOU FROM THE USA AND I ALWAYS MAKE SURE I LIKE YOUR VIDEOS.
Thank you 🧡 that's appreciated
Thank you Keeley for the update on this fantastic little printer. Wanting to send you and your family the very best of wishes for a wonderful Christmas and a safe and Happy New Year. Enjoy your break and looking forward to the exciting new content in 2023. xx 😘😘🎄🎄🎁🎁🍾🍾🥂🥂✨✨
Thank you 🧡 hope you have an amazing Christmas too. 🎄
Thank you for this video. Ive been struggling quite a bit to get a thermal printer that can print any brand of stickers. Do you perhaps know of any other thermal printer or printers that do the same please?
I've found that any thermal printer that loads paper from the back of the machine and does not have an enclosed cavity for a label roll will print any brand. Avoid Brother and dynamo. Some zebras will allow printing on any label but you have to buy the right size core label
You can feed the labels from the back while the lid is closed, and it will auto adjust so that it wastes zero labels.
Thank you 🧡 I discovered this sometime after getting the machine. It's a shame they don't advise this in their booklet. I have shown how I now load the printer in other videos
Can I ask what software you were using to create the custom labels or is this included with the printer, thank you
The printer does not come with software. I've done another video showing how you can use canva or something like Adobe Illustrator to create labels. I have left links to these videos in this video
can u print 4x2 labels? i cant find it anywhere on their website
I show in this video how to set up different sized labels no listed. As long as you can buy a size, you can set it to print
@@SoyandShea thank u so much!!!
Does this printer work on vinyl sticker?
No it doesn't. It needs special paper that is heat activated
Can you use round stickers with this printer?
Yes, you can use any shape. In the original videos, I show the round labels I was sent
Hello 👋🏻 can you tell my what brand of this labels did you buy ( the non branded) …
Unfortunately not as they are not branded. I searched for Thermal labels on Amazon and ordered the ones in the sizes I needed.
You are a hero
Thank you for watching 🧡
Can you refer me to the link to show how the barcode was made please?
I use Barcode Generator to make barcodes. www.barcode-generator.org/
can you use corel draw ????
Yes you can use any drawing program
Hi
Does it have to be a 4x6 label ? Does it have the ability to be smaller? And if so can I print out a custom label ?
Sorry, I have to ask if you have watched the whole video? I show using different sized labels and how to set them up.
@@SoyandShea oh lol
No o guess not
I will keep watching 😳 sorry
Hi again . Ok first thank you again for your reply I did go back and watch the whole video. I then ordered a munbyn . I’m now watching your set up video. Yesterday was a crazy day for me . I was very anxious about the last few steps feeling overwhelmed and like everything might fail . Your reply actually helped to slow my thoughts and let me get focused again .
Have a great day
🙂
@@sandramontague4053 Like everything we do for the first time, it can be daunting. Just take it one step at a time and it will come together. The printer is really simple and you are not going to wreck it. The worst that can happen is putting the wrong size label or measurements and wasting a couple of labels. When you get it, read through the booklet first, then start following step by step and you will have it set up in no time and creating your own labels.
@@SoyandShea thank you 😊
thank you very much video was helpful
Thank you for watching 🧡
Have you ever found Transparent thermal printer labels that are ACTUALLY clear and transparent???
I've ordered this kind TWICE now from amazon but both times they were NOT transparent as their descriptions said.
Kind of reminded me of that 'Old' gift wrapping tape years ago that you could easily see taped all over your gift! 😂🙄
I want some transparent 'invisible' labels for glass jars but I'm not having any luck finding these!
As yet, I've not used clear thermal labels. I know Munbyn have some on their site, but I've not yet ordered them
@@SoyandShea Oh well thanks anyway. My search continues. 😊
Does it print color ?
No. It doesn't have ink and uses heat to burn an image into special paper
Can I use the thermal slips that UPS send us for free ?
As I'm in Australia I really don't know. If you go to the Munbyn site, they advise which postal systems can be used with their different machines
Lifesaver
Thank you for watching 🧡 so pleased it helped
You should of put those direct upc labels in the bio im having trouble finding some for my MUNBYN printer
Just google direct thermal labels. Plenty of places come up including Amazon and ebay. I don't put in the bio as my links would be Australia and a majority of my viewers are in other countries.
I cant seem to print anything on labels .comes out blank ..
Maybe a silly question, but are you using thermal labels? If so, you may need to contact Munbyn in case it's a warranty issue
Please explain about barcodes
What exactly is it that you are wondering about as it is a fairly broad topic, one I have covered with my Patreon members.
Are there any other thermal printers that can use any labels plz?
There are quite a few. Google Thermal printers and lots will come up
I've been using phomemo. Pm246s is their regular shipping printer that uses usb and pm241bt is their Bluetooth that u can print from your phone wirelessly but still need usb for laptops