The tube for the washer fluid comes off. Just pull it out. When you are done replace it and there is a tab that clips on to one of the plastic pieces behind it. I hope that help people, you get plenty of room when you remove the fill tube.
I got the assembly out and removed the white plastic ring but now I cannot get the electrical connector unplugged. Is there some tab I have to release in order to pull it out?
@@MrfixitLbrighes I figured it out , it was because the light bulb didn’t have the yellow cap that locks it in place so I had to put more cardboard inside to hold the bulb still until I can order the yellow cap that holds it. In place.
Have you experienced any nursing of the projector housing brother? Been looking at doing this upgrade to my lady’s car, cause those factory lights are weak af
Edited: it's just really stiff. Make sure to have a strong grip and pull it out like a usb thumb drive or something. I'm doing the same to my Impala but I can't seem to get the connector disconnected from the headlight bulb. Looks like I want to squeeze the side of the connector but it would not budge despite a fair amount of force I put into pulling. Am I doing something wrong?
Man one day I was jumping on the highway going about 80 miles per hour thought it will be a good idea to open my sunroof and it f****** f***** my s*** up
Gm oem is D3S Philips bulb. Perfect matching color just don’t over paid for them. I paid like 110$ for pairs of those on Amazon . Those Philips bulb will last for years.
@@MrfixitLbrighes when my light went out I went to chevy and asked them how much they were , one of the worker's at Chevy said 300 just for one smh . I looked up on Amazon same design as the factory one's prices ranging from 20 to 40 bucks
Bruh, THANK YOU!!!! I had been twisting & turn that white fitting piece for a WHOLE HOUR trying to disconnect it from the bulb! 😂👊🏾
No problem 👍 glad I could help thanks for watching big dog... means alot
The tube for the washer fluid comes off. Just pull it out. When you are done replace it and there is a tab that clips on to one of the plastic pieces behind it. I hope that help people, you get plenty of room when you remove the fill tube.
Thank you for showing me how to remove the bracket bro 👌
Good stuff Sir ! Thank you !!
I got the assembly out and removed the white plastic ring but now I cannot get the electrical connector unplugged. Is there some tab I have to release in order to pull it out?
Sorry but yes
They wanted to charge me 400$ for one bulb , thanks bro about to go change mines now !!
Did you find one cheaper?
@@MrfixitLbrighes yes sir , I got mine off Amazon and changed them in like 15 minutes tops
@@MrfixitLbrighes mine were about 180$ for 2 bulbs and it was not hard at all I also recorded it all.
2014 Chevy impala LTZ 3.6
@@alexnieves7350 did u change both at the same time
@@MrfixitLbrighes I figured it out , it was because the light bulb didn’t have the yellow cap that locks it in place so I had to put more cardboard inside to hold the bulb still until I can order the yellow cap that holds it. In place.
Have you experienced any nursing of the projector housing brother? Been looking at doing this upgrade to my lady’s car, cause those factory lights are weak af
Edited: it's just really stiff. Make sure to have a strong grip and pull it out like a usb thumb drive or something.
I'm doing the same to my Impala but I can't seem to get the connector disconnected from the headlight bulb. Looks like I want to squeeze the side of the connector but it would not budge despite a fair amount of force I put into pulling. Am I doing something wrong?
Did u need help still
Can you do the passenger side
Its the same but passenger side has more room to work with
what happened to ur sunshade for the sunroof
😂😂😂
Man one day I was jumping on the highway going about 80 miles per hour thought it will be a good idea to open my sunroof and it f****** f***** my s*** up
Did the color match the factory color?
Do you mean as far as what the bulb produced?
And to answer that no because I had to change both bulbs
I mean like the color of the actual light
Yes ... both lights I bought was different from wht was installed..no sure if it was the factory tho bough car used. Hope that helps
Gm oem is D3S Philips bulb. Perfect matching color just don’t over paid for them. I paid like 110$ for pairs of those on Amazon . Those Philips bulb will last for years.
That's to much bro they're 40 bucks on Amazon and they're brighter then from auto zone ect
And they have different colors for it way better then paying over 100 dollars on those lightbulb
Bro u ain't lieing... 😂 I was afraid the cheap ones... they wouldn't last that long... mine's still good
@@MrfixitLbrighes when my light went out I went to chevy and asked them how much they were , one of the worker's at Chevy said 300 just for one smh . I looked up on Amazon same design as the factory one's prices ranging from 20 to 40 bucks
Awful
Excuse me