Lining everything up with a tapered drift punch inserted from the opposite end you put the axle through will make it much easier to put the wheel back on. Thats something I picked up from changing nose wheels on Cessnas.👍🏼
Sorry, but yes..Only if 2WD though. It seems there is also another hitch I didn't know about. One of the components in the spare wheel that requires removal, is difficult to get out. Requiring heat and perhaps some machining. More to follow. ie not a roadside repair. Bugga.
@@dadvsson at least you now have choices. Perhaps take the wheel and get the spline removed and freed up. Then you are good to go. Swap a wheel or change a tyre. Mind you, odds of getting a SC or front flat is very low compared to a rear.
@@epicridesandtours There is another potential issue I am working through. It seems in order to fit these sleeves, some bits need to be disassembled from the hubs. I am told that it ain't easy. Will give a bash tomorrow. Stay tuned. Getting a little fed up with Ural.
Lining everything up with a tapered drift punch inserted from the opposite end you put the axle through will make it much easier to put the wheel back on. Thats something I picked up from changing nose wheels on Cessnas.👍🏼
Love the safety boots ;)
Steel capped crocs. Not seen them??😮😮😅😅
Thanks again for a great lesson. So, the spare needs a 'kit' for front or SC? Bugger, didn't know that at all.
Sorry, but yes..Only if 2WD though. It seems there is also another hitch I didn't know about. One of the components in the spare wheel that requires removal, is difficult to get out. Requiring heat and perhaps some machining. More to follow. ie not a roadside repair. Bugga.
@@haitch1980 Damn. I've got the 2WD.
@@dadvsson Check my most recent vid about spline removal.
@@haitch1980 Thanks mate. I did and am still not happy being the mechanical moron that I am.😁
@@dadvsson at least you now have choices. Perhaps take the wheel and get the spline removed and freed up. Then you are good to go. Swap a wheel or change a tyre. Mind you, odds of getting a SC or front flat is very low compared to a rear.
Nice info, re: the spacers, Haitch. Do you know if that's a 2022 thing, or are earlier models like my 2021 GU in need of spacers too?
Any 2WD with a sidecar on the left mate.
@@haitch1980 Cheers, Haitch. I'd best get hold of a set then.
@@epicridesandtours There is another potential issue I am working through. It seems in order to fit these sleeves, some bits need to be disassembled from the hubs. I am told that it ain't easy. Will give a bash tomorrow. Stay tuned. Getting a little fed up with Ural.
The spline needs removing to install the sleeve. I baulked as heat is needed
Bubbled paint and other stuff.
@@haitch1980 Strewth, that's way more complex than I I thought.