hi , kindly ,what is the reason for alarm (NTP server reachabilty fault & clock sysnchronization alarms) ,at the time of outage we don't have any alarms just these ?
hi , kindly ,we have a case where power disturbance alarm appears after replacing radio 2219 b1 ,and we solve it by just reset the BB ,is there any way to solve such issue without BB reset?
This is a Power system monitoring done automatically. I guess, we cannot turn that off. On the other hand, we should swap Power cable of that specific ERS with another ERS or change the Power source of that ERS.
Clear message, clear structure, easy to understand, thank you
Thank you it is very clear and effective
hi ,
kindly ,what is the reason for alarm (NTP server reachabilty fault & clock sysnchronization alarms) ,at the time of outage we don't have any alarms just these ?
We consider these alarms to be checked under transmission. If no RBS issue is found.
hi ,
please for DUW ,how can i activate VSWR supervision ?
hi ,
when using cabx command ,some radio units appears with * ,is this mean that these radio units are in mix mode ?
hi,
how can i get vlans ,next hop for DUW 31001 ,because commands used for BB6630 not working for DUW
and how can i use traceroute command to check the traffic & reachability ?
For DUW, we can use below command for VIDs, IP and GW:
Stip
Hi,
kindly ,what is UL & DL loss normal range ,and what are the problems that lead to high UL or DL value ?
Hello, can we upgrade BB from GLU not via moshell?
I guess, we should be able to do SW upgrade by GUI. We are supposed to create MOs and then perform action on this specific MOs to install and upgrade.
Sir
Can you please make one video about setting of core ftp server.
Thanks
hi,
how can i remove the local mode by commands ? because the local mode pin is not working
how did you do it can you share with me , thank you
All steps mentioned in the video.
Hi,
Kindly ,what command poll means and whay it used always after restart -c?
For SW Upgrade case, we only use it to check the status of the current action.
@@MuhammadShohaibHassan can you make video to descibe to us the commands used for troubleshooting bb.
hi ,
kindly ,we have a case where power disturbance alarm appears after replacing radio 2219 b1 ,and we solve it by just reset the BB ,is there any way to solve such issue without BB reset?
This is a Power system monitoring done automatically.
I guess, we cannot turn that off. On the other hand, we should swap Power cable of that specific ERS with another ERS or change the Power source of that ERS.
can i download the SW package from BB ?
No brother.
Not that, I know of.
hi ,
kindly ,what is this ,
IpAccessHostEt=1,IpSyncRef=7
Thank
thanks
To get to know Cell maping on ERS.
invxr command's last paragraph will show, which ERS is working for which Cell.
🤝