Interesting concept but the angle piece she used slid around. Plus the surface to press on for the stamping I think needs a better flat platform insert like the clear insert. I like the scoring flip tool. Like the holepunch! Maybe when it comes to TM can get it!
No but I use a cut-to-size piece of fun foam as I couldn't get a clean stamped impression without it. You also need to place stamp in area demonstrated which can make alignment trick. To overcome this I create a jig. Hope this helps 😍
I would think stamping would be a problem due to the uneven surface of the board (the scorelines) and the stamping press part seems a bit awkward. Also, the tool that you use to guide the cut needs to be more secure so it doesn't move about like it did for her. WRMK comes up with some great ideas, it's just the execution and quality of the product doesn't always measure up. Half the stuff is great, half is junk. I had the predecessor that is similar to this board way back when and it was a piece of junk. Cheaply made. The corner chompers are the best of all the stuff you guys made.
Does this use the same stamping platforms as the WRMK precision stamping plates? Don’t need both but had invested in multiple stamping plates so that I could batch layered stamping, so if I could salvage tnose- it would be great.
@@beckymartin1810 depends on how much you cut hun ... if I'm doing a lot of cutting I use a guillotine but this works great for the odd family card or three 😍
Hi! You can find a tutorial for the bowmaker, as well as all the different features of The Works tool, on this channel playlist: th-cam.com/play/PLIp38IbVoP9eRR--HAz7hTUPrfIarAGIZ.html
Me encantó este producto, así que me lo compré, pero cuando lo abrí una de las piesa vuela xq se había roto, cunado me queje con el vendedor me dijo que a varias personas le paso lo mismo que lo pegue. Pero al ver el diseño de la pieza que se rompio vimos q era muy factible que se rompa, una desilusión☹️ xq me había enamorado del articulo
The works is a great tool perfect concept, does it need improvement yes we are always going to find things that work better for some and not others. The first problem I encounter was a part the was broken the company American Crafts that sell it ignored my email but memory keepers didn’t 😃😊 they send a replacement. That you We r Memory Keepers. But am having another problem I can NOT find replacement blades anywhere. Can anyone let me know if this product is going to be upgraded or discontinue? If it is going to be upgraded I hope you continue using the same blade. It would be very disappointing if everyone will have to buy another one.
Mine arrived yesterday, with the piece of envelopes broken and dropped by the packaging, I tried to put it on but there is nowhere to fix it, the piece jumps out and won't accept staying in place, so far I haven't received a response from the seller ... Has anyone had the same problem? How to solve it?
Yes, I had the same problem. The company didn’t respond to my inquiries but memory keepers did. They send me a replacement. I love this tool. But am having problems finding blades.
I had the same issue, too. Actually, quite a few people did. Which is a bummer because this tool is the greatest ever. It just sucks that an important part of it easily breaks for a lot of crafters.
Just bought this and I can't wait to use it. Creating a scrapbook recipe album for my new dil and this will help so much!
Thank you for concept. I hadn't thought to use this tool to make journal ephemera 👏👏
Congratulation WR Memory Keepers, fantastic, Pop Up very pretty
We’re glad you like it!
I love this tool I am a beginner and it work so perfect 😍
You could also make a pocket on the tag with that embellishment piece on the bottom buy only gluing the bottom and sides, leaving the top free.
It would be helpful to add links for all the products you use.
Interesting concept but the angle piece she used slid around. Plus the surface to press on for the stamping I think needs a better flat platform insert like the clear insert. I like the scoring flip tool. Like the holepunch! Maybe when it comes to TM can get it!
Tenho e uso bastante nos meu trabalhos. From Brazil 🇧🇷💚💛💙
What is the adhesive she is using at 2:40 in the video?
Hi! That’s Sticky Thumb double sided craft tape from American Crafts.
@@WeR_Makers Thank you!k
When you stamp over the uneven score board part doesn’t it make an imprint in your stamped image?
No but I use a cut-to-size piece of fun foam as I couldn't get a clean stamped impression without it.
You also need to place stamp in area demonstrated which can make alignment trick. To overcome this I create a jig. Hope this helps 😍
I would think stamping would be a problem due to the uneven surface of the board (the scorelines) and the stamping press part seems a bit awkward. Also, the tool that you use to guide the cut needs to be more secure so it doesn't move about like it did for her. WRMK comes up with some great ideas, it's just the execution and quality of the product doesn't always measure up. Half the stuff is great, half is junk. I had the predecessor that is similar to this board way back when and it was a piece of junk. Cheaply made. The corner chompers are the best of all the stuff you guys made.
It all works you just have to tweak a few things ... like adding a cut-to-size piece of fun foam for stamping 👍
Does this use the same stamping platforms as the WRMK precision stamping plates? Don’t need both but had invested in multiple stamping plates so that I could batch layered stamping, so if I could salvage tnose- it would be great.
Hi! This uses the same technology as the Precision Press Stamping Tool. The platforms are a different size and shape.
تحفه 😭😭💗
Can we use the comfort grip paper trimmer replacement blade on this? Tell me yes lol
Yes you can. 😉
@@WeR_Makers thank you! Do you know how long it lasts? Trying to budget the expense.
@@beckymartin1810 depends on how much you cut hun ... if I'm doing a lot of cutting I use a guillotine but this works great for the odd family card or three 😍
Does it make mini envelopes?
Yes it does.
What is the name of the ink she used?
Those are Vicki Boutin Color Wheel Inks.
Can you show how to use the bow maker
Hi! You can find a tutorial for the bowmaker, as well as all the different features of The Works tool, on this channel playlist: th-cam.com/play/PLIp38IbVoP9eRR--HAz7hTUPrfIarAGIZ.html
😍😍😍😍
😍❤👏🏻👏🏻👏🏻
How/where do I purchase this tool?
They sell it at Joann's and Michael's or on the We R Memory Keepers website. Also on Amazon.
Hi! It's available online at Joann here: bit.ly/jas_allinonetool
@@WeR_Makers thank you
@@CherylB745 Thank you, I haven't seen it at Michaels, but I will try Joann's
@@iLadyT HOBBY LOBBY
Me encantó este producto, así que me lo compré, pero cuando lo abrí una de las piesa vuela xq se había roto, cunado me queje con el vendedor me dijo que a varias personas le paso lo mismo que lo pegue. Pero al ver el diseño de la pieza que se rompio vimos q era muy factible que se rompa, una desilusión☹️ xq me había enamorado del articulo
Y cual es la pieza frágil si pudieras decirme?
The works is a great tool perfect concept, does it need improvement yes we are always going to find things that work better for some and not others. The first problem I encounter was a part the was broken the company American Crafts that sell it ignored my email but memory keepers didn’t 😃😊 they send a replacement. That you We r Memory Keepers. But am having another problem I can NOT find replacement blades anywhere. Can anyone let me know if this product is going to be upgraded or discontinue? If it is going to be upgraded I hope you continue using the same blade. It would be very disappointing if everyone will have to buy another one.
Mine arrived yesterday, with the piece of envelopes broken and dropped by the packaging, I tried to put it on but there is nowhere to fix it, the piece jumps out and won't accept staying in place, so far I haven't received a response from the seller ... Has anyone had the same problem? How to solve it?
Oh no! We’re so sorry to hear that. Please contact our customer service team via email and they’ll be happy to help you: info@americancrafts.com.
Yes, I had the same problem. The company didn’t respond to my inquiries but memory keepers did. They send me a replacement. I love this tool. But am having problems finding blades.
I had the same issue, too. Actually, quite a few people did. Which is a bummer because this tool is the greatest ever. It just sucks that an important part of it easily breaks for a lot of crafters.
Holy shit