ฝัง
- เผยแพร่เมื่อ 19 ต.ค. 2024
- This video contains Paid links that gives me a 6% commission if you click and buy any product on that website . This video contains Paid links that gives me a 6% commission if you click and buy any product on that website . Some old footage
Check out my web site www.nobox7.com/
Check out my store front www.amazon.com...
Support this channel on Patreon www.patreon.co...
Hi
A common technique for centering objects is to wrap masking tape or a thin layer of metal strips around the object to be centered.
Soda pop can strips wrapped around the pipe to hold it in place until it is soldered or brazed in place works very well.
I have used this technique to center fishing poles onto the handle while glue sets. It works.
Hello. Well 👍👍 what is the consumption?? And what type of air compressor do you have??
That is great how can i use this in my outdoor wood stove for permanent or supplemental supply of heat
How do you think of using coccentric (as back end) and eccentric reducer (as front end) welded together as a combustion chamber?
great idea
Nice blue flame
Can you please try to build one of these into a furnace with crucible to melt brass ?
Ever think of going with a flux voted or coated brazing rod? 18% silver flux cored brazing rod will stick to everything and leave a solid joint with enough penetration to boot.
Great Scott Marty 👨🔬
1:23 YOU HAVE A LATHE (it could be fixed up nice too) that could make the tubes in any size you want, any length, straight as a shot, even in differing Diameters if you want and control the size of the oriface to at least a ten thousandths. Have you ever thought about using that instead of being limited to standard off the shelf tubes and solder. Copper and brass machine like butter.
Nice design.
Have you tied to add water injection to the oil after it’s up to temp?
I think it would kill the flame
I Haven’t tried it in a pressurized system yet, but with a drip feed system it will increase heat output 2-3 fold.
It may only work on drip/ liquid system but try spraying some water in the air intake on one of your burners and see if anything happens. Worth a try.
I have used oil water mix to forge steel on a regular stove type oil burner.
@@johngroberts952 how does adding water increase the heat output? The oil has a certain heat of reaction. That's where your heat comes from. The water has a heat of vaporization that will actually steal some of the combustion heat in order to vaporize. This isn't adding up.
@@bobbybaucom4489 F105 fighter jets used the same principle in their afterburners.
@@bobbybaucom4489 I'm kinda guessing here, but when researching wood gassifyers I found designs that inject steam that is cracked into Hydrogen and oxygen and recombined into a hydrocarbon to increase burn efficiency. I'm probably misstating it, but my understanding was the steam goes through a chemical break down and changes the fuel .
Quiero hacerme un pico así como el del vídeo...Podrías pasarme los planos de la maquina que probas los picos,esa que tiene perillas ¿como se llama? maquina del futuro?
Don't suppose you have a video explaining how to make one of them there fancy torches?
Jason , well i have over 20 such videos and i also sell them on youtube ebay and my website
@@NOBOX7 Hmm...I will have to check them out. Thanks for the reply.
not sure if my insurance will cover this
Maravilloso
I want to buy.. where it is?
Check description
Are they intentionally not identical? [the way they are constructed I mean] ~( 'w')~
No ,I used all the hardware in a town of 170,000 people .This is like the 10 th nozzle that month so there was nothing but scraps left
@@NOBOX7 So basically you had to run from store to store cleaning out their shelves? ~( 'w')/
Where I live you can ask them to bring you some and it will be there on the next truck. (~_^)-b
Of course, if you are in a house fire hurry, that may be too late...hard to guess the situation. ~( ,m,)~
How much fuel does that use?
Depends on the settings but in ths video i think we did 26LPH
@@NOBOX7 26LPH- 26 litter/hour?
whoahfahh!! that is hot
How much does one of them things cost
500 for this size but i have versions all the way down to 150
Do you sell them and if you do how much¿?
Yes sir contact me at nobox7@yahoo.com i have models from $500 to $150
the whistle s revenge
it's a lot of flow
$600 I DON'T FEEL SO BAD NOW
I take it your anti-foaming oil is still going well? ~( 'w')/
I am shocked at how well it works , i think it conditioned the tubing im using to stop reacting with my sodium hydroxide electrolyte
@@NOBOX7 So do you figure that over time it [ionically] dresses the surfaces in such a way as to resist further foam generation by causing bubbles to conjugate in the fluid or to precipitate on the surfaces?
I know that oil can make surfaces hydrophobic, which, in this case, might lead to gas precipitating out more rapidly...
I'm going to have to do some research into this...
For greta !!!!
Watching you braze wow
Please check u email sir.
David , did i get your email ? i just seen this comment
fake gas and diesel