*I would drink coca-cola out of those beautiful cans!* 😂 Those motors are huuuge. ⚡🤙🏼🤙🏼⚡ I was highly anticipating this ride footage after seeing the build footage in the previous video 😁 That thing looks like a dream to carve 🤩 I love truck talk!! I'm a big truck and bushings geek haha, really enjoyed that segment about leverage etc. I think it would be hard for me to squeeze between cars witn trucks that wide on London roads though 😂 The carving looked beautiful, I am surprised it felt less stable than 12" trucks, very interesting. The truck axles look so thin in the ride footage 🤔 That range 👌🏼👌🏼👌🏼 More of this type of carving! Was a joy to watch!!
Thanks x million brother :) Yes, I'm happy if you had as much fun as you expected. Perhaps this video was more enjoyable for people like you who like new ESK8 information.
I agree DIY is usually not cheap. But I was interested in massive stator ESC and motors. I will probably get the big ones. PLEASE DO A PROPEL ENDEAVOR REVIEW. Or a lacroix. I’m sure they would give you a board.
안녕하세요 까미님 언제나 멋진 영상 잘 보고 있습니다 이전에 타고 다녔던 이코모빌의 m24의 후속기종의 리뷰영상을 보며 반가움을 느꼈었는데 이번에는 제가 현제 타고 다니는것과 같은 15인치 트럭이 나오니 다시한번 반가움을 느끼네요 영상을 보며 하나 궁금한게있습니다 영상과 같은 길에서 저는 저만한 조향각으로 유턴이 안돼고 있습니다 여러가지 이유가 있겠지만 크게 꼽는다면 무엇이 있을까요? 대략적인 스팩은 부싱은 아마 같은것일테고 나사산이 앞이 아래3 위5가 보이고있고 뒤는 4 4입니다 데크는 좀 긴 편이어서43인치 이고 앞 뒤 바퀴의 축간 거리는 104cm입니다
네 안녕하세요~ 오랜시간동안 채널 시청해 주셔서 감사합니다. 제 예상에는 아마 트럭을 마운트한 방식이 다른것 같습니다. 만약 사용하시는 데크가 드랍다운형태에 트럭을 드랍쓰루로 장착하셨다면 아무래도 제가 마운트한 탑마운트 형태보다 조향각을 살리기 어려울것 같습니다. 데크의 지상고는 좀더 높아지지만 트럭을 탑 마운트 하신다면 더 큰 조향각을 보실수 있을것 같습니다. 더 잘 아시겠지만 또 그만큼 라이딩안정성은 떨어지는 편입니다.
Hello~ :) Most are compatible, but the alignment of the wheel pulley and the motor pulley may not be finely aligned. So, It would be helpful if you prepared thin washers with an internal diameter of 10mm or 8mm.
@@KAMiJUINs Thank you, I have those. I think it's a problem most companies only sell pulleys for cloud wheels. I want to be able to use kegel and abec typ wheels.
Another Nice build. The laminated deck looks cool. Why was this build lacking in power on the on with the 155mm offroad wheels? I would have expected it to be pretty powerful with 12s5p 200A battery and 4kW 170kv motors? What is the weak point: the battery, the ESC, the motor or the gearing? The reason I ask. I am planning a build, but am having trouble deciding what parts I need. I want to avoid (expensive) trial and error :-)
Thank you for watching :) I think the motor is the reason. On the spec, it says UP TO 4kw, but I don't think it's up to that in every section. Most electric motors always exert maximum torque, but the Focbox seems to intervene a lot to eliminate unstable starts. In off-road, the initial torque needs to be good to use the power well, but it seemed like a setting where I could feel more strength after the beginning. I think that's why I felt that way on the off-road. If there's an alternative, I recommend a bigger motor.
When I make a test ride video, I choose a place and time zone where there are no people and cars available. Since I shoot alone, it is easy to shoot without worrying about losing equipment or infringing portrait rights on people's faces. And I can ride more freely without caring about cars or people. That's the reason. Thank you for watching :)
Can you post a video recording the sound of the motors? I'm interested in buying quiet motors for my board and these seem to be perfect. Or maybe you know some quieter motors?
![[LIVE] : ONE ลุมพินี 89 | คู่เอก "ยอดไอคิว vs คิริลล์"](http://i.ytimg.com/vi/Z3vYkHJ_5Ig/mqdefault.jpg)
Great video as always beautiful broll. That turning radius is tight!
Thanks~ :)
Oouuh!! Another nice build Dude! You are the guy!
Thank you so much as always~ :)
*I would drink coca-cola out of those beautiful cans!* 😂 Those motors are huuuge.
⚡🤙🏼🤙🏼⚡
I was highly anticipating this ride footage after seeing the build footage in the previous video 😁
That thing looks like a dream to carve 🤩
I love truck talk!! I'm a big truck and bushings geek haha, really enjoyed that segment about leverage etc.
I think it would be hard for me to squeeze between cars witn trucks that wide on London roads though 😂
The carving looked beautiful, I am surprised it felt less stable than 12" trucks, very interesting. The truck axles look so thin in the ride footage 🤔
That range 👌🏼👌🏼👌🏼
More of this type of carving! Was a joy to watch!!
Thanks x million brother :) Yes, I'm happy if you had as much fun as you expected. Perhaps this video was more enjoyable for people like you who like new ESK8 information.
So cool👍🐶 Spring is coming soon. I’m ready enjoy it🛹
Thank you~ I'm looking forward to it too :)
You make such fun works of art!
Thank you for watching, bro :)
Awesome Build :) Cool stuff , Thanks :)
Thank you so much ~ friend :)
Great video cool board!
Thank you for saying and watching :)
I like your work vry clean
Thank you for watching :)
I love your love for boards!
Thank you for watching :)
Good video bro 💪 👍 😎
Thank you as always bro (^0^=b
끄아미님 안녕하세요~
모터가 외관도 그렇고 정말 마음에 드는데, 모터를 교체하면 기존의 변속기 세팅도 변경해야하나요?
네 안녕하세요~ 넵 당연히 바꿔주는것이 정상입니다. (배터리와 ESC출력이 모터가 사용할수 있는 전류량과 차이가 있을수 있기때문에 효율과 안전성면에서 꼭 변경해줘야합니다.)
@@KAMiJUINs 역시ㅠㅠ 괜히 잘못건들였다가 먹통될까봐서요 고민 좀 해야겠네요
안녕하세요 까미님 영상 잘 보고있습니다!!
저도 15인치 트럭으로 바꾸고싶어지네요 혹시 제우스보드에 90미리나 105미리 휠을 장착해도 간섭이 없는지 여쭤봐도 될까요??
네 안녕하세요~ 시청감사합니다.
간섭이라고 하시면 모터쪽과 지면 간섭을 말씀하시는 것인가요? 글세요 105미리까지는 도로 사정이 괜찮다면 문제 없을것 같은데 90미리까지는 좀 간당간당하지 않을까싶어요.
I agree DIY is usually not cheap. But I was interested in massive stator ESC and motors. I will probably get the big ones. PLEASE DO A PROPEL ENDEAVOR REVIEW. Or a lacroix. I’m sure they would give you a board.
I really wish that would happen.lol :) Thank you for watching my videos for a long time~
안녕하세요 까미님 언제나 멋진 영상 잘 보고 있습니다
이전에 타고 다녔던 이코모빌의 m24의 후속기종의 리뷰영상을 보며 반가움을 느꼈었는데
이번에는 제가 현제 타고 다니는것과 같은 15인치 트럭이 나오니
다시한번 반가움을 느끼네요
영상을 보며 하나 궁금한게있습니다
영상과 같은 길에서 저는 저만한 조향각으로 유턴이 안돼고 있습니다
여러가지 이유가 있겠지만 크게 꼽는다면 무엇이 있을까요?
대략적인 스팩은
부싱은 아마 같은것일테고 나사산이 앞이 아래3 위5가 보이고있고
뒤는 4 4입니다
데크는 좀 긴 편이어서43인치 이고 앞 뒤 바퀴의 축간 거리는 104cm입니다
네 안녕하세요~ 오랜시간동안 채널 시청해 주셔서 감사합니다.
제 예상에는 아마 트럭을 마운트한 방식이 다른것 같습니다. 만약 사용하시는 데크가 드랍다운형태에 트럭을 드랍쓰루로 장착하셨다면 아무래도 제가 마운트한 탑마운트 형태보다 조향각을 살리기 어려울것 같습니다. 데크의 지상고는 좀더 높아지지만 트럭을 탑 마운트 하신다면 더 큰 조향각을 보실수 있을것 같습니다. 더 잘 아시겠지만 또 그만큼 라이딩안정성은 떨어지는 편입니다.
@@KAMiJUINs 아! 탑 마운트를 생각 못했었네요 감사합니다
Very nice, I also like to be able to turn sharply and do not have to go extremely fast.
Thank you for watching~ :) Always ride safely ('0')=b
Do you know a good place to buy pneumatic tires?
trampaboards.com/tyres-c-254.html
If you're looking for high quality tires, check here.~
@@KAMiJUINs Maybe not so expensive ones :)
yo what are those you wearing at the beginning of the video on your feet , seem comfortable
These are room shoes I bought at UNIQLO.~
Hello, can I ask if Evolve pulleys work for other trucks like wowgo, exway and others? Thank you
Hello~ :) Most are compatible, but the alignment of the wheel pulley and the motor pulley may not be finely aligned. So, It would be helpful if you prepared thin washers with an internal diameter of 10mm or 8mm.
@@KAMiJUINs Thank you, I have those. I think it's a problem most companies only sell pulleys for cloud wheels. I want to be able to use kegel and abec typ wheels.
Yep 👍
Thank you for watching :)
ït looks like a fun ride
Yes, It was~ Thank you for watching :)
Hey man I’m looking to build an electric skateboard , so what ESC do you recommend for dual motors of 550w 90mm wheels?
Are you going to use hub motors? What are you going to do with the battery?
I think I can recommend it in more detail if I know these things~
@@KAMiJUINs yes hubmotors with bigger wheels 8inch wheels that are for terrain ?
I wanted to use 90mm wheels but I changed my mind and so I want to use 8 inch terrain
Another Nice build. The laminated deck looks cool.
Why was this build lacking in power on the on with the 155mm offroad wheels?
I would have expected it to be pretty powerful with 12s5p 200A battery and 4kW 170kv motors?
What is the weak point: the battery, the ESC, the motor or the gearing?
The reason I ask. I am planning a build, but am having trouble deciding what parts I need. I want to avoid (expensive) trial and error :-)
Thank you for watching :)
I think the motor is the reason. On the spec, it says UP TO 4kw, but I don't think it's up to that in every section.
Most electric motors always exert maximum torque, but the Focbox seems to intervene a lot to eliminate unstable starts.
In off-road, the initial torque needs to be good to use the power well, but it seemed like a setting where I could feel more strength after the beginning.
I think that's why I felt that way on the off-road. If there's an alternative, I recommend a bigger motor.
Hi. Thank you for the info. I will keep it in mind when I do my build
1분 전은 못참지
시청해주셔서 감사합니다~ :)
Love this build. Why is your city so deserted?
When I make a test ride video, I choose a place and time zone where there are no people and cars available. Since I shoot alone, it is easy to shoot without worrying about losing equipment or infringing portrait rights on people's faces. And I can ride more freely without caring about cars or people. That's the reason.
Thank you for watching :)
I’m stationed in Korea and want to get the moopo hurricane to ride around and get to work
Why not~ !!!
Can you post a video recording the sound of the motors? I'm interested in buying quiet motors for my board and these seem to be perfect.
Or maybe you know some quieter motors?
It'll be hard to record just the motor sound. But I can say this was the quietest motor I've ever used as a belt drive.
Thank you for watching~
Wowgo at2 6368 motors are really quiet
Thank you for the info! Even a recording of them spinning freely, inside the house, no need to ride the board outside
When give away diri...i want one please!?
Cool
Thank you for watching for a long time :)
These motors are nice
Thank you for watching :)
warning: DONT buy from MASSIVE STATOR, it is owned by scammer Jason ( owner of now dead Enertion). Just buy it anywhere else
Argee
I agree. It was pretty disappointing to see Kami do business with him when making these 2 videos.
Can you explain why exertion is so bad?
Enlighten me please, im close to buying the X84 motor,
@@eagertosucceed6004 same I’m looking into the x55’s