I have just bought a gas’s cooker and I didn’t notice it came with a cable with a 3 pin plug on it . Can I remove that cable and attach the 6mm grey cable into the black box on back of the cooker ?? There is a n isolate switch above the kitchen worktop that powers the plate behind cooker
If my electric cable earth isn’t covered with the yellow and green cable cover, but is in between the blue and brown and all coved with the grey wires cover ,can you still use it?
called out an electrician but it cost £180. A few days later it wasn’t working so called them back but had only forgot to switch the switch on the wall . Damn ! They billed £150 just for coming out and flicking a wall switch. Total cost £330 .
I’ve just purchased bush betaw50b cooker and I haven’t got a clue what I’m Looking at but doesn’t seem to have come with a wire to connect cooker to the wall. Where can I purchase one from and what will I need?
just bought an electrolux induction cooker and the connectors at the back are different from this one! there are 6 screws, with 3 of them being blanked off with white plastic things! so, do the wires go on to the open ones or the blanked off ones?
I bought a new cooker the wires on older one are black. Red. Green and yellow are these old wires there a ppain to get in to the new terminals should i get new ones
just bought an aeg induction double oven and wiring connectors at back have 220 and 240v. What puzzles me is that the 240v connectors have been blanked but surely connection should be made to the 240v
You must fit cable spade connectors to the ends of your cable for a secure connection to the terminals otherwise those wires will work loose when moving the cooker into position and can cause a fire / electrocution risk......!!!!!!
My mums just had a new beko electric cooker delivered today, i wired it up with same wire as old cooker but it keeps tripping the main switch board on wall... its same make as old cooker but smaller... any help would be appreciated
Ive just bought a BUSH BESAW50B and im finding it extremely difficult to install. Ive tried and 2 other people have tried. we just can't get the wires in the tiny holes! stressed
Well... that seems simple. Can't wait to have my oven explode as soon as i cook something XD ...narrrr everything seems fine. I've done everything correct, i just had to trim the wires because it wouldn't fit neatly, was my decision to trim the wires right?
If your wires are stranded (which they should be when you're connecting a cooker), then it is not only a good idea to use crimps, it is the way it should be done in the first place. Stranded wires should never be tightened directly under a screw, that's an accident waiting to happen.
It's hard to see in the video due to the low quality of the image, but it looks like you're directly tightening stranded wires under the screws without any sort of crimp/ferrule used. If so, that is a very bad and more importantly quite dangerous practice that also goes against regulation. It's something that should never be done as it greatly increases the risk of accident and/or injury.
What is the name of those tiny ferrules on the ends of the wires? I know ferrules, but these are little gold ones without a jacket and I was wondering where I might buy them.
@@colonynaut1627 Not sure what you mean, but if by "jacket" you mean the plastic "funnel" that's on most ferrrules made these days, then I believe that's not part of all ferrules and some of them are essentially simply small metal tubes of certain length, which are then crimped on cables. But I'm not a native English speaker, so it's also possible this type is called something specific and I just have no idea what the real name is.
Your video has helped me fixed for someone. Most important thing here is i got my daily bread from your video. God richerly bless you with more 🙏.
how nice to hear such a clear voice on TH-cam; very helpful.
If I was going to pay over £100 for a qualified sparky to install my cooker I wouldn't be on here watching Vids of how to do it myself 😂
😂😂😂
Thank you very much, just did exactly what you put on here and my cooker is on.
Absolutely brilliant video. Simple clear instructions. Well done 👍🏾
Brilliant. Just what I needed. Very clear step by step instruction.
I followed your video steps yesterday (12/7/2018) and I have lift off. Thank you very much :)
Exactly what i was looking for too. Very helpful, clear instructions...Thank you.
Thanks so much! no more begging of my lazy man! done it all bymyself :) !
You need a new man sis 😂😂
Thank you for making this video, saved me quite a bit of money:)
I just needed to know how to take the black box and open it was a mystery until I went underneath 😂 thanks for the video
Watch your video got a new cooker did not how to wire it up had it working in a hour so thanks. From Scotland
thanks mate you saved me £80
Nelson yes lol we don’t need no electricians !!!
Big help I managed to hook the cooker up with help from this video. 😁
Hi got my cooker today came with no cable were do I get this from pls and thanks
Some recent Hotpoint cookers, at least, have terminals that need either an 8mm spanner or a 4mm Allen key, rather than the crosshead screws shown.
Thanks for the upload . Subbed!!
cheers mate!! cooker wired up successfully! !
Quick question: as there are multiple live and neutral screws, does it matter which ones you use if they are all connected by those little bridges?
No, any one will do.
Than you. you saved me $180 and time as well. I took me just 10 minutes to get it fixed.
Exactly what I was looking for, thank you!
This is so informative and helpful. Thank you. I think I may be able to do this now.
Are you an electrician
@@manonfire92 it’s not rocket science
@@clarky8813 are you an electronan Clarke?
@@manonfire92 are you an electrician hp sauce?
@@clarky8813 I'm not are you an electrician clarke maple syrup?
Exellent video sir😊
I have just bought a gas’s cooker and I didn’t notice it came with a cable with a 3 pin plug on it . Can I remove that cable and attach the 6mm grey cable into the black box on back of the cooker ??
There is a n isolate switch above the kitchen worktop that powers the plate behind cooker
Thank you, saved my pizza ☺
If my electric cable earth isn’t covered with the yellow and green cable cover, but is in between the blue and brown and all coved with the grey wires cover ,can you still use it?
This is excellent and very easy to follow. Thank you.
Heyy man thanks a lot this video really helped thanks man
Thanks so much, very clear instructions.😀
called out an electrician but it cost £180. A few days later it wasn’t working so called them back but had only forgot to switch the switch on the wall . Damn ! They billed £150 just for coming out and flicking a wall switch. Total cost £330 .
thanks m8 you just saved me £55.00
Thanks - better than spending £80 to get Currys / AO to install.....
I’ve just purchased bush betaw50b cooker and I haven’t got a clue what I’m
Looking at but doesn’t seem to have come with a wire to connect cooker to the wall. Where can I purchase one from and what will I need?
AO want £90 to do this job, and it's £90 I just don't have, so this video is ideal thanks 👍
just bought an electrolux induction cooker and the connectors at the back are different from this one! there are 6 screws, with 3 of them being blanked off with white plastic things! so, do the wires go on to the open ones or the blanked off ones?
I bought a new cooker the wires on older one are black. Red. Green and yellow are these old wires there a ppain to get in to the new terminals should i get new ones
Hi i just one to ask you please I have hotpoint cooker per aprire over heated and melted it is it possible to put deferent brand on it please
What if earth isn't coated can still use it?? Got wire from sparky on site
Beautifully done 😊
What do we call the U shape copper inside please, the one on the video... thank you
Top man. Thank you. 👍👍
Do you use a twin and earth cable?
just bought an aeg induction double oven and wiring connectors at back have 220 and 240v. What puzzles me is that the 240v connectors have been blanked but surely connection should be made to the 240v
You must fit cable spade connectors to the ends of your cable for a secure connection to the terminals otherwise those wires will work loose when moving the cooker into position and can cause a fire / electrocution risk......!!!!!!
yensabi the cable is clamped so wires can't move.
They can come out of the spade connectors just as easy .
If the nail underneath is not okay with me, I think it is lost, what should I do?
Many thanks
Thanks ❤
My mums just had a new beko electric cooker delivered today, i wired it up with same wire as old cooker but it keeps tripping the main switch board on wall... its same make as old cooker but smaller... any help would be appreciated
Ive just bought a BUSH BESAW50B and im finding it extremely difficult to install. Ive tried and 2 other people have tried. we just can't get the wires in the tiny holes! stressed
Thanks you sir🙏🙏🙏
thank you . itis very useful.
Very helpful thank you
Well... that seems simple.
Can't wait to have my oven explode as soon as i cook something XD
...narrrr everything seems fine.
I've done everything correct, i just had to trim the wires because it wouldn't fit neatly, was my decision to trim the wires right?
Also, the bucklet that came with the oven told me to connect the L to bottom left and the N to middle right.
Hi sorry got my new oven today no cable with it were do I buy this from??
محتاج الروزيتا ديه من اين اجيبها
Thank you for help 🤕
does the thickness of the wire , affect the cooker ,
can you tell me how to open the black wire box on a zanussi oven model no zoa35502xd
BIG THANK YOU
Thank you
Does it matter which live or neutral connection. 123
MINDS GOT DIFFERENT CONNECTORS ON BACK
Dendrites?
what if i have a white wire red green and blue where does white go
Thanks v . Much, this video safe 50 € for me. .
Its very helpful but then which distance can a cooker control unit be installed from a finished floor
you can't do that yourself, you need an electrician to put the supply into the cooker switch
what if i have a cooker wall socket? can i install a plug to a cooker wire?
definitely NOT! Cookers draw much more than a 13amp plug can take.
thanks 👍👍👌👌🌷🌷❤❤
What voltage is that cooker? 220-240v?
240 by the looks of it .
mine only has two copper connectors, both sides at the top 2 screws
Thank you, but for me I stragglers to connect inside
Thanks man
Could be my eyes but yhe brown live wire looks like its going into top left hole not middle left..🤔
Is using crimps a good idea?
If your wires are stranded (which they should be when you're connecting a cooker), then it is not only a good idea to use crimps, it is the way it should be done in the first place. Stranded wires should never be tightened directly under a screw, that's an accident waiting to happen.
Thank youuuu almost wasted my chicken
It's hard to see in the video due to the low quality of the image, but it looks like you're directly tightening stranded wires under the screws without any sort of crimp/ferrule used. If so, that is a very bad and more importantly quite dangerous practice that also goes against regulation. It's something that should never be done as it greatly increases the risk of accident and/or injury.
What is the name of those tiny ferrules on the ends of the wires? I know ferrules, but these are little gold ones without a jacket and I was wondering where I might buy them.
@@colonynaut1627 Not sure what you mean, but if by "jacket" you mean the plastic "funnel" that's on most ferrrules made these days, then I believe that's not part of all ferrules and some of them are essentially simply small metal tubes of certain length, which are then crimped on cables.
But I'm not a native English speaker, so it's also possible this type is called something specific and I just have no idea what the real name is.
Just don't use a big ass screw driver as you will fuck the head of the screw right away! Learnt my lesson.. anyway thanks saved nearly £100
Could you make another video please but more blurry.
why are there 6 connectors when only 3 are needed ?