Thank you. I'm hoping next year to finally get around to building a new video series. In the meantime, I've made a list of my favourite video tutorials for various CAD programs on my blog: www.cadjewelleryskills.com/jewellery-cad-software-overviews-video-tutorials/
Mohammed al-sharif - I'm glad you like. In this case, the bezel shape you've made is no longer possible to use with the Cut to Finger Rail command. So you'll have to make another ring rail of the same size. Just add an additional ring rail, and when it says "do you wish to replace the existing rail?" click No. Hope that helps.
Hello, Your page is so helpful, your blogs amazing. One question Could I Use this program for design big size stones jewellery like semi-precious stones and different shape(Cabochons)?
Thank you for the kind words. For cabochons, you can either build your own stones and settings manually (as I teach in my courses), or you can use the cabochons inside their own Gem Loader, which will work with the Bezel Builder with a bit of tweaking of default options.
Great tutorial, you should continue this series! Theres a limited amount of tutorials online for beginners. At the start I had no clue but now I understand the basic principles of designing in matrix! Could you make a ring from start to finish? or would that take too long to fit into a video? Thank anyway :)
Thank you for that. You're right about the dearth of good tutorials online for Matrix. I've tried my best to collect what good tutorials there are onto my blog after I vet them. Have a look and see if this helps: www.cadjewelleryskills.com/jewellery-cad-software-gemvision-matrix/
VIV JY - The most common things which can go wrong on this exercise are as follows: 1.) You absolutely have to have a ring rail and a flat curve shape in the Looking Down view before hitting the Make Rail command. If you're missing the ring rail (or if your ring rail has been modified or broken) this will not work. Likewise, if your flat curve shape is not flat in the Looking Down view, this will not work. When in doubt, the best thing to do is to select everything, delete it, and start fresh. 2.) Once it's been made, if the custom ring rail hasn't been Rebuilt (with the Rebuild Curve command), the sweep you get from this shape will likely be broken into three pieces. This is because 1 rail sweep doesn't seem to like sharp corners. Fortunately, it's an easy fix (simply rebuild it). Give it another go and see if these help.
i am trying to learn this tutorial...i got a problem on timing at 4:05 and trying to match 2 ring wires together to main rail. and for some reason i get (selection menu) window and i see 3 curve and none options to check..why i get this window? :(( thnx regards
hi, i`m new to rings and cad jewelry and i have a question: why is it necessary to add a bezel to this ring? won`t the stone be fixed in the ring`s arms ?
+danny3man - Stone setters need metal to fold over the stone's girdle (widest point), as well as something underneath the stone with which to keep the stone from rocking back and forth. You could certainly embed some sort of side-wall into the arms, but you would still need a gallery bar underneath the stone to keep it from rocking around or shaking loose. If you're still not clear what I mean, talk to a diamond setter. Hope that helps.
Hi Sheik. Sure. I have a course ready for any version of Matrix from version 5.4 onwards through 9, as well as MatrixGold. Contact me through my CADJewellerySkills website and I'll be happy to discuss training options.
Hey sir. Im thinking about going into this branch of design. I was wondering if you went to college. If not what type of training did you do? If you could get back to me, i will greatly appreciated.
+Elvin Tosun Hi Elvin. It's a good question, and one I'm asked more often than you think. So often, in fact, I wrote a FAQ page to answer. Check out my answer here: www.cadjewelleryskills.com/frequently-asked-questions-part-2-getting-started-in-jewellery-design/
Hi Jack, Thanks for the tutorial. We are currently looking for experienced Matrix designer that are interested to work as freelance, therefore, wanna ask if you interest on that? Can you give us your email and go through the details? Thanks
Dear Jack Chan: I'd be happy to point you in the direction of some of my students. You can find my contact details on my blog: www.CADjewelleryskills.com
By far the best videos out there. Sad that there isn't more with Matrix 8.
Thank you.
I'm hoping next year to finally get around to building a new video series. In the meantime, I've made a list of my favourite video tutorials for various CAD programs on my blog:
www.cadjewelleryskills.com/jewellery-cad-software-overviews-video-tutorials/
Just wanted to let u know your videos are useful in 2020 too :)
It's so great
This was great! You make it look easy...I know it's not...lol
thanks!
+Kalynn Perry - Thank you. That's why I did a video tutorial for this. But if you have any questions, feel free to ask.
Hi Jack, I like this. Also like the examples at the end it gave me ideas. k :)
Nice !
Mohammed al-sharif - I'm glad you like.
In this case, the bezel shape you've made is no longer possible to use with the Cut to Finger Rail command. So you'll have to make another ring rail of the same size. Just add an additional ring rail, and when it says "do you wish to replace the existing rail?" click No.
Hope that helps.
NICE!
Hello, Your page is so helpful, your blogs amazing. One question Could I Use this program for design big size stones jewellery like semi-precious stones and different shape(Cabochons)?
Thank you for the kind words.
For cabochons, you can either build your own stones and settings manually (as I teach in my courses), or you can use the cabochons inside their own Gem Loader, which will work with the Bezel Builder with a bit of tweaking of default options.
I loved the video, and I left like and will be subscribing I will also be checking out your blog. Thanks for the resources.
thank you .
Great tutorial, you should continue this series! Theres a limited amount of tutorials online for beginners. At the start I had no clue but now I understand the basic principles of designing in matrix! Could you make a ring from start to finish? or would that take too long to fit into a video? Thank anyway :)
Thank you for that. You're right about the dearth of good tutorials online for Matrix.
I've tried my best to collect what good tutorials there are onto my blog after I vet them. Have a look and see if this helps:
www.cadjewelleryskills.com/jewellery-cad-software-gemvision-matrix/
Ok mate, thanks allot!
VIV JY - The most common things which can go wrong on this exercise are as follows:
1.) You absolutely have to have a ring rail and a flat curve shape in the Looking Down view before hitting the Make Rail command. If you're missing the ring rail (or if your ring rail has been modified or broken) this will not work. Likewise, if your flat curve shape is not flat in the Looking Down view, this will not work.
When in doubt, the best thing to do is to select everything, delete it, and start fresh.
2.) Once it's been made, if the custom ring rail hasn't been Rebuilt (with the Rebuild Curve command), the sweep you get from this shape will likely be broken into three pieces. This is because 1 rail sweep doesn't seem to like sharp corners. Fortunately, it's an easy fix (simply rebuild it).
Give it another go and see if these help.
hi, thnx for amazing tuorial, but if i may ask how to cut the ring rail to match the bezel?
+mohammed al-sharif - Do you mean how to get the ring rail to follow around the bezel? Or do you mean making an open shank where a bezel can drop in?
i am trying to learn this tutorial...i got a problem on timing at 4:05 and trying to match 2 ring wires together to main rail. and for some reason i get (selection menu) window and i see 3 curve and none options to check..why i get this window? :(( thnx regards
hi, i`m new to rings and cad jewelry and i have a question: why is it necessary to add a bezel to this ring? won`t the stone be fixed in the ring`s arms ?
+danny3man - Stone setters need metal to fold over the stone's girdle (widest point), as well as something underneath the stone with which to keep the stone from rocking back and forth. You could certainly embed some sort of side-wall into the arms, but you would still need a gallery bar underneath the stone to keep it from rocking around or shaking loose.
If you're still not clear what I mean, talk to a diamond setter.
Hope that helps.
+CADJewellerySkills yes i understand now. thank for replying
No problem. Keep practicing. :-)
dear sir
you have uploaded video in 2013.actually i have to learn from you the matrix9 .can i
Hi Sheik.
Sure. I have a course ready for any version of Matrix from version 5.4 onwards through 9, as well as MatrixGold.
Contact me through my CADJewellerySkills website and I'll be happy to discuss training options.
Hey sir. Im thinking about going into this branch of design. I was wondering if you went to college. If not what type of training did you do? If you could get back to me, i will greatly appreciated.
+Elvin Tosun Hi Elvin. It's a good question, and one I'm asked more often than you think. So often, in fact, I wrote a FAQ page to answer. Check out my answer here:
www.cadjewelleryskills.com/frequently-asked-questions-part-2-getting-started-in-jewellery-design/
+CADJewellerySkills really appreciate it. Thank you sir.
That web is not working now sir may you upload more videos on TH-cam
Hah. They finally took the old redirect down.
We rebranded to the British Academy of Jewellery. Here it is: www.BAJ.ac.uk.
i can't do it
Hi Jack, Thanks for the tutorial. We are currently looking for experienced Matrix designer that are interested to work as freelance, therefore, wanna ask if you interest on that? Can you give us your email and go through the details? Thanks
Dear Jack Chan:
I'd be happy to point you in the direction of some of my students.
You can find my contact details on my blog: www.CADjewelleryskills.com
No See......