左上のネジが極めて強固でなめてしまいましたが、 その他の基盤取り付けネジの場所をこの動画で確認することで、 直すことができました。ありがとうございます。 The left-top screw was crushed, but by disassembling other screw bottom of basis, I could have repair my watch. Thanks for good video. 我压碎了左上的螺丝。 但是,我去掉了其他根据螺丝。 我能了修理,谢谢
Great Video! I'll try to fix my Huawei GT2 alone with this tutorial. How I can identify the barometric pressure assembly of this watch? I need to fix it too.
The disassembly steps are very clear, thanks. Would you please disassemble the Amazfit Stratos 3? The entire Internet doesn’t even have a video of disassembling this watch. Thanks
My GT2 front LCD just popped off, it is still attached somehow, a flat wire is holding the base and the front LCD together. And I noticed that the water resisistant ring broke apart already. Can you help me how to fix this? The video did not show how to disassemble the front LCD.
Amazing video! I replaced my display, but now my watch's battery is not working properly. Before, I could get 8-10 days with it, now I can't get 24 hours of usage before charging it. Does anybody knows what I did wrong and how can I fix it? Thanks
Thanks for the video! Could anyone tell me, what can be wrong if honor magic watch 2 turns off automaticly after showing an error message about overheating?
Hola a todos. En algunos repuestos no es necesario desmontar la parte de la pantalla, pues este ya cuenta con los marcos necesarios. Por otra parte, ¿como podría mantener el sellado hermético una vez destapado? ¿Con un nuevo empaque? y dónde lo consigo? o con algún tipo de pegante o adhesivo?
likely the BMS undervoltage protection circuit is preventing it from charging n turning on. same thing happened with old iphones. u can try warming it up so the voltage increases a little and the undervoltage protection circuit disconnects. let it soak the heat for some time. if it doesnt work, u can try disassembling it and changing the battery or just charging it (with 3.7VDC). consider getting a new seal as well if it turns on
Hello. I did it. I changed the display and now buy starting only huawei logo apears and after that is dead. I tryed it a bunch of times. Everytime the same thing happens. Does anyone has any clue what should i do?
Imam isti problem,ali ekran nije mjenjan. Kada stavim sat na punjac pojavi se huawei natpis stoji par sekundi i nestane.... Da li si to rjesio problem?
Sir i have huawei p30 pro with wach yesterday i was installed new face wach then that's wach can't open again please help me what can i do and how to format GT watch plz
Great video. Can you illustrate how to remove and replace the battery as this was not explored in the video
Great video, very clear! I try to replace my screen following your video , after watching it al least 20 times :)
How to replace screen
Very good video. Used it to replace my screen recently. Now I found out I need new vibration motor. Ugh. 😢
Thank you very much ! I've repaired my swatch !
This video have been really helpful.. save me a lot of time and money. Tq.
Melhor tutorial. Deu certinho.
Great video. I changed broken screen, and now i get overheating error after couple of minutes. Any solutions?
左上のネジが極めて強固でなめてしまいましたが、
その他の基盤取り付けネジの場所をこの動画で確認することで、
直すことができました。ありがとうございます。
The left-top screw was crushed,
but by disassembling other screw bottom of basis,
I could have repair my watch.
Thanks for good video.
我压碎了左上的螺丝。
但是,我去掉了其他根据螺丝。
我能了修理,谢谢
Professional tutorial. Thank you!
Great Video! I'll try to fix my Huawei GT2 alone with this tutorial. How I can identify the barometric pressure assembly of this watch? I need to fix it too.
From where i can buy the lcd replacement unit?
Please reply
Thank you
Great video, I want to know how I could clean one of the buttons because somehow it became sticky and it doesn't makes that click when I press it.
Can you explain how to remove the battery?
Is necessary any special tool to replace the battery on GT2? Do you have a video?
The disassembly steps are very clear, thanks. Would you please disassemble the Amazfit Stratos 3? The entire Internet doesn’t even have a video of disassembling this watch. Thanks
This back cover have barometer sensor inside? I have a problem with barometer - after cleaning still show 0. The same with altimeter.
great stuff dude, just 1 question.. so the side button pcba comes with front panel?
Alguna solucion a que el sensor no prenda y la bateria se caliente? ya reemplacé la bateria y sigue sucediendo eso.
Is this the same procedure for the honor magic watch 2?
What the hell to do with Huawei watches you numpties
Здравствуйте! замену аккумулятора можно показать?
how to remove buttons flex cable? how to replace battery?
Hi dear
I have issue with upper bottom
I think after the last update
Yes, please indicate how to replace screen?
Tks for the clear video. How to replace screen? New video is mandatory. Tks
Hi, I've done all this, replaced the lcd screen, now the device won't turn on, any ideas please?
Does the waterproof still there after reassembled?
I dont think so bro
If you put a New o-ring, than yes.
Same question 🤔
Where is the vibration part? My watch stopped vibrating.
Where to buy water resistant ring please answer back thank you
My GT2 front LCD just popped off, it is still attached somehow, a flat wire is holding the base and the front LCD together. And I noticed that the water resisistant ring broke apart already. Can you help me how to fix this? The video did not show how to disassemble the front LCD.
Qué medida usas para los desarmadores ??
Hi. I should fix the microphone. Where is it? wich element? Thank you!
Hi I looking for this vidéo for gt2e, when i finish, he dont turn on
Vida uçlarına kaç mm lik tornavida kullaniyorsunuz
I have a Huawei watch GT2 The watch does not work, and there is a red light at the bottom of the watch that works continuously. what's the problem
What is the size of hexagon scew ?
Can you please tell me where I can get the BTB-Removal-tool?
Where can i get the btb removal tool?
Excelente
Hello, can you tell/show we which part is responsible for vibrations? Sometimes It's not working.
Same for me, did you fix it?
Amazing video! I replaced my display, but now my watch's battery is not working properly. Before, I could get 8-10 days with it, now I can't get 24 hours of usage before charging it. Does anybody knows what I did wrong and how can I fix it? Thanks
Hi.What size is hexagon screwdriver?
Same question
Donde lo compro el displey
Thanks for the video! Could anyone tell me, what can be wrong if honor magic watch 2 turns off automaticly after showing an error message about overheating?
It overheats
The battery?
Do you know the battery model?
Speaker stopped working. Please help
Does anyone know where's barometer sensor?
has anyone flash this devices? got one bricked on installing software
Hola a todos. En algunos repuestos no es necesario desmontar la parte de la pantalla, pues este ya cuenta con los marcos necesarios. Por otra parte, ¿como podría mantener el sellado hermético una vez destapado? ¿Con un nuevo empaque? y dónde lo consigo? o con algún tipo de pegante o adhesivo?
Estoy justo en lo mismo, necesito reemplazar el empaque...
How do I replace the screen?
I didn't use my gt2 pro for 3 weeks. Now it won't charge or turn on. Help please!
Same problem. Did you manage to fix it?
@@Alanedu1000 no. once they go there's a small chance of fixing them because of complex internal design
likely the BMS undervoltage protection circuit is preventing it from charging n turning on. same thing happened with old iphones. u can try warming it up so the voltage increases a little and the undervoltage protection circuit disconnects. let it soak the heat for some time. if it doesnt work, u can try disassembling it and changing the battery or just charging it (with 3.7VDC). consider getting a new seal as well if it turns on
@@AV-xd8yo Thanks for the advice.
I'll heat it up with a hairdryer and report back.
Bonjour
Vous n'avez pas montré comment enlever la partie écran...
my fat fingers cannot do this job.
Hello. I did it. I changed the display and now buy starting only huawei logo apears and after that is dead. I tryed it a bunch of times. Everytime the same thing happens. Does anyone has any clue what should i do?
Imam isti problem,ali ekran nije mjenjan. Kada stavim sat na punjac pojavi se huawei natpis stoji par sekundi i nestane.... Da li si to rjesio problem?
How much a mew screen costs??
my watch over hiting and not chagering
Sir i have huawei p30 pro with wach yesterday i was installed new face wach then that's wach can't open again please help me what can i do and how to format GT watch plz
thank you
Does not help me. I have dust under the screen.
I lost my screen, anybody help me plz.
trash
Size of the screwdriver torx ?
T2