Let me get those 15x5.5-6 cleats you got hidden under that bench, you probably got some shocks squirreled under there too Taylor!!! Now I just need this pipe on my mm212 pro!! Any odds on that?
Hey everyone, Coming here for help :D so i just got my hands on a used 212 oredator it’s been on a rototiller and i was wondering what are the first things i should do? I already got a new carb as the one on it is leaking and i got a stage 1 kit what should i look for?
Because this pipe will not help very much at all from a performance perspective without better breathing and a larger main jet in the carb. In my opinion this pipe is overkill unless you are bolting it to a built 7500 RPM engine.
@@JNC1973 There may be a slight power increase but I'm not sure how noticable it would be when compared to a standard type header pipe. I've never seen anyone compare pipes on a dyno for these small engines. GPS has a dyno and it would be really cool if they tested different pipes AND at different stages of an engine build. Testing with and without a muffler would also be nice to see on a dyno. If I had this bike I would probably get this pipe if I wanted to go all out with the bike and didn't mind the cost.
Can I buy the V2 version from your website and also this item number SKU: STAGE1PK212-BLACK for the jet and intake and basically be the same as your stage 1 kit that you sell?
Hey Taylor! Nice talking with you today! Pipe sounds great. I’m gonna get one, thanks!
I totally just ordered this for my Trailmaster.
Yeah!!! Thanks for the support.
hay, GO POWER SPORTS from grandma of TYRANIS CUSTOMES
Damn you guys just jacked up the price of the MB200.
It be cool to have a brake light conversion for the mb200
A little late, but the new MB-200 "Pro" has a rear light now, and a frame reinforcement near the triple trees.... It's $1,200
When well you get your megamoto front suspension kit in stock, I would buy it from somewhere else but, I would like to support you guys
Scavenger type exhaust....very cool
A single cylinder engine has to be turning some rather high rpm to be able to take advantage of exhaust scavenging, well above 6500 rpm.
Do you guys have a video of installing the stage one kit on this bike?
Will this set up work on the older baja warriors and baja heat bikes?
Hello what can I do about that emission box after air box removal? Just remove it?
yeah some minor instructions would have been nice, i have the same question and ran into a few other easily explained issues...
Would this work on the Baja Warrior / Massimo MB200
Let me get those 15x5.5-6 cleats you got hidden under that bench, you probably got some shocks squirreled under there too Taylor!!! Now I just need this pipe on my mm212 pro!! Any odds on that?
Not that anyone cares but I did get my cleats. I'll just find contentment in imagining the rest of the details!
When are you guys getting the mb200 back in stock??
Hey everyone, Coming here for help :D so i just got my hands on a used 212 oredator it’s been on a rototiller and i was wondering what are the first things i should do? I already got a new carb as the one on it is leaking and i got a stage 1 kit what should i look for?
Sweet pipe. Your chain looked a little loose.
Will this work for massimo mb200
will this exhaust fit on a predator 212??????
Do you sell one anything like this for a MM212?
Or have you maybe heard of someone making one fit?
Why exactly do you need the Stage 1 carb kit with this pipe? What happens if you just run this pipe and don't change anything else?
Because this pipe will not help very much at all from a performance perspective without better breathing and a larger main jet in the carb. In my opinion this pipe is overkill unless you are bolting it to a built 7500 RPM engine.
@@Deucealive75 Do you think i will notice a slight power increase if I replace my stage 2 kit 1 inch header pipe with this thing ?
@@JNC1973 There may be a slight power increase but I'm not sure how noticable it would be when compared to a standard type header pipe.
I've never seen anyone compare pipes on a dyno for these small engines. GPS has a dyno and it would be really cool if they tested different pipes AND at different stages of an engine build. Testing with and without a muffler would also be nice to see on a dyno.
If I had this bike I would probably get this pipe if I wanted to go all out with the bike and didn't mind the cost.
If you want it a little louder and gain a little power remove the three baffles in the muffler:)
I know it's made for mb200 but will it fit a coleman ct200u?
Not a perfect fit, we are working on that kit for the Coleman's.
does this also work with the trailMaster 200x Hurricane?
It does!
I reckon a pit bike engine would be sick on one of those.
Or even just add gears
Can I buy the V2 version from your website and also this item number SKU: STAGE1PK212-BLACK for the jet and intake and basically be the same as your stage 1 kit that you sell?
Yeppers!
Is it quieter or louder than the stock exhaust?
It's not much louder than stock.
Does it fit on ur hurricane 200 PRO modle?
We will have a Super Pipe to fit the Hurricane 200 Pro model by December. We currently do not have available but please stay tuned.
Is it stainless?
Would this work on the Coleman rb/rt200?
It won't fit properly.
Does this pipe fit on the predictor 212 engine?
It sure does!
@@GoPowerSports alright then. 💪 guess I'll be getting one in the near future
Pretty quiet.
Will this work with the new style frame?
Most likely not. We are coming out with a version 2 that will fit it.
It sounds OK, not great
Some are happy that's it's not obnoxiously loud.
I heard it on a tillotson 212, sounded much better.
@@GoPowerSports I didn't say it wasn't loud