I came here for a DIY tutorial and the one with drilling a hole in a nut so that I could resolve my issue with drilling a hole in a smaller nut really helped!
I need to lift a pallet of concrete at work and it weigh about 600kg. I think I will use that tool, as I need to inspect the bottom of the pallet. The boss is always complaining we lose shackles all the time, but with a strop stuck to one. I am sure he will be much happier.
Those were literally the dumbest things I've ever seen everything would break with the slightest tension on them the bolts were absolutely pointless the green strap would have broken as soon as it was pulled melting it doesn't make it strong at all the hot glue holding on a piece of sand paper that's going to get hot and melt releasing the sand paper should of just put the paper on and pushed down with the rubber would hold just as good
Берём проволочку и засранную шпильку. Захуяриваем патроном шуруповёрта часть резьбы, а оставшуюся часть резьбы захуяриваем проволочкой. Получаем засранный верстак, убитую резьбу и проволоку. Очень удобно. Всем рекомендую🤣🤣🤣🤣
Чтобы не испохабить резьбу на шпильке шуруповертом можно её подмотать чем-то. В вместо проволоки попытаться использовать что-нибудь другое, помягче. Например, леску. Может и будет работать. Останется только почистить верстат щеткой. Но это уже получается лайфхаки для применения лайфхака 😂😂😂😂
Hahahaha wtf! Dude just get an 18 inch roller Instead of two 9 inch. Don't use am 18 if you are not a really good roller. It gets heavy if it has a long nap and doing ceilings can be taxing with an 18
Which issues where you, too poor to afford that, you already purchased over priced supplies for yesterday, that you suddenly couldn't afford any marginal cost for today? You have to be a bot or a shill. None of this has any value unless you had all the money for the tools yesterday but suddenly have none of the money today.
Some of the most pointless things I've ever seen. Drilling 2 holes in a nut so you can drill a hole in a smaller nut. WTF? Oh and please, nobody try lifting anything with that shackle.
These are pretty useless the very first one why not just use a wire brush and some are dangerous. The tape cutter especially you almost cut yourself in the video trying to use it...
i can see someone losing a finger on that tape cutter
I was thinking the very same thing. Maybe not lose a finger, but at least a needing stiches.
Many good ideas that I didn't know, thank you for sharing
Я пришел раньше Сыча, офигеть
И я зашла почитать стишата, а Сыча - нет. Не запер ли Mr.Sunny eго в клетку бана, как Бородатый мастер???
Пофиг бан,филин выходи.
А что поддатый так и не выпустил?
If you had millions of dollars yesterday but suddenly today you have zero dollars because you spent all of them on the perfect tools and supplies!
More like if you had a mosquito problem but only a shot gun to deal with the problem. So fucking dumb!
Great ideas especially to those on countryside that is far away from tools suppliers. Tnx for sharing
Vamos maestro a tope contigo💯💪🏼💪🏼
Чтобы твои соседи сверху воспользовались твоими советами по поводу соединения полипропиленовых труб.
I came here for a DIY tutorial and the one with drilling a hole in a nut so that I could resolve my issue with drilling a hole in a smaller nut really helped!
Don't you hate it when you have the right size nut but you wish you could use the wrench right there on the bench?
Because it's missing the step where you drill a hole in ... an even smaller nut! 😲
Не поняла, гииииде Сыч???? Я что, зря, смторела эти бредни????
А-а-а!!!! Ору в голосинуууу!!! Сыч долго заряжал комменты, но выстрелил - мощно!!!
Great parody of diy tools, thanks!
God idea
3:45 я сильно сомневаюсь, что человек, не умеющий забить гвоздь, сможет это собрать. 😁
Small nails,hard wood...what he made would work my friend
@@bbuucc пс, пс, лови совет из глупой России-Матушки: тонкогубцы... ☝️😉 Не благодари.
@@bbuucc Clothespin. It will not be thicker than the fixture shown by the author
These must be a result of drinking Bud Light
That one with the u-bolt and the belt is a great idea especially if it's going to be under heavy load and your life is depending on it!!!
But the U Bolt will Spread Open Dont Trust that.
I said the same thing. Some idiot is gonna watch this, thinking that a cheap way to make a pulling strap?
Yeah, think I'll add that to my mountaineering gear.
I need to lift a pallet of concrete at work and it weigh about 600kg. I think I will use that tool, as I need to inspect the bottom of the pallet.
The boss is always complaining we lose shackles all the time, but with a strop stuck to one. I am sure he will be much happier.
😂
I believe there are laws in place protecting endangered tools. The "Save The 10mm Sockets" coalition will surely report this video.
Muy bueno máquina 💪🏼💯💯
SUNY !! 🤙🏻
പൊളി 💪😄
очень хорошо и интересно
Those were literally the dumbest things I've ever seen everything would break with the slightest tension on them the bolts were absolutely pointless the green strap would have broken as soon as it was pulled melting it doesn't make it strong at all the hot glue holding on a piece of sand paper that's going to get hot and melt releasing the sand paper should of just put the paper on and pushed down with the rubber would hold just as good
Так и не понял для чего нужна сверлить две гайки ?😝
Ти ще багато чого не понімаєш..! 🐷-рус. 👎👎😊😊😊
1.8 ляма подписчиков, 35 тысяч просмотров за 15 часов и 526 лайков. У этого канала более 95% подписчиков - не настоящие?
Многие заходят поржать в комментариях. Тут особенно отжигает Очень Злой Сыч! Его комменты намного круче того дерьма, что лепит Mr.Sunny.
Берём проволочку и засранную шпильку. Захуяриваем патроном шуруповёрта часть резьбы, а оставшуюся часть резьбы захуяриваем проволочкой. Получаем засранный верстак, убитую резьбу и проволоку. Очень удобно. Всем рекомендую🤣🤣🤣🤣
Чтобы не испохабить резьбу на шпильке шуруповертом можно её подмотать чем-то. В вместо проволоки попытаться использовать что-нибудь другое, помягче. Например, леску.
Может и будет работать. Останется только почистить верстат щеткой. Но это уже получается лайфхаки для применения лайфхака 😂😂😂😂
У дядь Сани новые грибочки))
Hamdy
🥰🥰🥰🥰🥰
🙈🙈🙈
Приспособление для сверления дырок в гайках-это конечно круто(нет), осталось только найти применение дырявым гайкам
Просто автору очень нравиться сверлить гайки, в прочем кто может ему запретить 😁
А вот бить молотком по хорошему метчику я бы не стал...
0:59 требую эксперимент от дядь Сани! Пусть он этим тросом свою машину дёрнет.
Why this channel assumes that we have all the tools available for "easy" crafts 😅
Когда они уже начнут гайки продавать при предъявлении справки из дурки. Некоторые уже геноцид гаек успели сотворить.
شكراً جزيلاً
interesting creative idea 👍👍
Аааааааааааа!!!!!!!🤯
Чувак с болгаркой на ты. Крамсает всё налево и направо!
What could go wrong at 2.59?
What problems are you possibly trying to solve with these terrible "5 minute crafts"?
My thoughts exactly..... the vast majority of these are completely moronic 🤦♂️
Pelo q entendi vc não entende nada de nada de serviços e ferramentas fora do padrão.
😂
Creative Hamdyman's Useless Ideas
Hahahaha wtf! Dude just get an 18 inch roller Instead of two 9 inch. Don't use am 18 if you are not a really good roller. It gets heavy if it has a long nap and doing ceilings can be taxing with an 18
All that can be said is why , why , why.
забить гвоздик сделал приспособу, и приклеил соплями наждачку , она же оьт нагрева отклеится.... ФУФЛО КОРОЧЕ.
Я всё смотре и непонял-что это было и зачем?
Wow...do they try to be absurd , useless and dumb ??
These things (?) will brake apart and put someone eye out !! Yikes!!!
Thanks!!! You solved a couple of issues with your innovation.
Which issues where you, too poor to afford that, you already purchased over priced supplies for yesterday, that you suddenly couldn't afford any marginal cost for today?
You have to be a bot or a shill. None of this has any value unless you had all the money for the tools yesterday but suddenly have none of the money today.
MM77 Approved 👍🏻👍🏻
Was the porn music necessary 😮
Some of the most pointless things I've ever seen. Drilling 2 holes in a nut so you can drill a hole in a smaller nut. WTF? Oh and please, nobody try lifting anything with that shackle.
How in the world do you come up with these ideas every day🙄?????
Watching TH-cam
Some useful, some not, some pointless. Some dangerous. Looking at you tape cutter.
🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️
Столько ненужных поделок .остальными весь Ютуб забит.
These are pretty useless the very first one why not just use a wire brush and some are dangerous. The tape cutter especially you almost cut yourself in the video trying to use it...
Macgyver is running out of money, looks like hes resorting to making videos of interestingly dumb ideas for quick cash
какой-то позор...
Learn how to spell....
"HAMDYMAN" Should be Handyman.
Geniuses
Most of it is useless.
😂😂😂😂