Hello sir आप लोग अलार्म की जगह सीधा मोटर को ही off करना चाहते हैं तो मेरे channel #VikasMobileTech पर एक video है उसे देखें , No tention हो जाओगे ये मेरा दावा है, और यदि कोई प्रॉब्लम हो तो मुझे comment में बताना मैं आपको whatsapp के थ्रो बताऊंगा Ok
दमदार वीडियो है ये ,पर पंप और अलार्म दोनों के स्विच को एक कि आउटपुट से ले सकते हैं ताकि मोटर बंद तो अलार्म भी बंद वरना पानी लेवल जबतक कम नही होगा अलार्म बजते रहेगा ।। Great job yaar
Pl use a 9v battery instead of charger/ adopter to avoid electric shock due to any defect in charger/ adopter. The battery will last for a year. I am using it.
And the othe simple way is ... just buy wireless calling bell and put the swith at the tank and bell wherever u can place .. it will comes with atleast 10 mtrs range
At water tank use one ball or any plastic item witch will be lifted and should close the circuit then sounds buzzer to avoid shock or any other problems
@@subhambanerjee2994 A limit switch can be used for closing the buzzer circuit. It can be easily attached with a float. Then we can avoid the contact with water completely. The system become 100% safe.
Very useful... I always feel so sad when me n my family end up wasting water due to overflow of tank. This method will save water & electricity both. My tast for this weekend.
I have a Sinicon Automatic water level n pump control system but I don't know anyone who will com hom n fix for me. I live in Hosur. Water tank on 2nd floor terrace.
Bhai mai jaldi video like nahi karta but aapka itna solid video dekh kar like kiye bina nahi rah paya. Actually I was looking for this kind of video brother coz recently I build my own house and most of the time water get overflow from tha water tank. But now I'll definitely install this thing in our home. Once again thanks a lot brother for this useful videos👍
Hello Sir, यदि आप चाहते हो कि टंकी फुल होने पर मोटर automatic off हो जाये आपको बंद भी न करनी पड़े तो आप मेरे चैनल #VikasMobileTech पर जाये और इस की video देखें मैं 100% गारण्टी के साथ कह रहा हूँ आपको इसके बारे में कोई नहीं बताएगा । यदि आपको ये system बनाना है तो मैं बनाऊँगा। यदि मेरे ऊपर भरोसा हो तो मेरे चैनल को सब्सक्राइब करके मुझे भी आगे बढ़ने का मौका दे और मेरी सभी वीडियो जरूर देख यदि आपको बनाना हो तो मुझे reply कर देना आपको whatsapp नंबर send कर दूँगा,
Beleive me i was think for something like this to stop water wastage ... To save water i had to keep a chk on tank and sometimes stand beside it for a long time in heat... Thnks to you now m gonna definately give it a try
@@pkabhi5284 Relays are used where it is necessary to control a circuit by an independent low-power signal, or where several circuits must be controlled by one signal. It is commonly available and widely used in such logics.
Harshjoli u r 100% correct. Connecting the alarm with motor can save time, electricity & wastage of water. I'll connect this alarm with motor through a single switch.
It is a crude version with less safety, don't use a smps power supply.Use a small transformer power supply and add a BC 547 transistor it will manage all safety concerns and even control a relay.Wire the relay in DOL starter mode .If you have ideas in electronics you can make water level sensor using reed switch and magnet at very low cost.
that's right! if the water is low the water pump start without pressing start and stop using a relay and relay coil has low consume power you can use indicator lamp instead buzzer because buzzer can disturb other people
I made this circuit in my teenage (that days we never got appreciation only scolding) ,as an electronic hobbyist (30 years back) .I can explain the circuit briefly, an npn transistor (BC 547) connect it's emitter to negative of power supply ,base to a 10k (try 4.7k, 2.2k,1 k according to mineral ion content in water) resistor other end of resistor connect to tanks overflow level sensor by wire (finolex telephone wire, 2 pair or same) .Bottom level connect to positive of power supply by wire (pair of tele wire) ,collector of transistor connect to negative of 12v DC buzzer , it's positive is connect to positive of power supply.Tank level sensor made by a 20mm pvc pipe with a height of tank , two turn of tin (it will resist corrosion) coated bare copper wire (use the same Tele wire after removing the insulation) over the pipe for bottom level sensor and upper level sensor ,the wires from circuit connect to this .Use 6 0 6 500ma (or 0 /12) transformer, bridge rectifier and a 1000mfd capacitor as filter for power supply.Use three or for transistor(same circuit), replace buzzer with LED and 470 ohm resistor for showing different tank levels if you needed . When water reaches the upper level the transistor forward biased it conduct, buzzer will sound you can off the pump manually.Control the pump with relay use a BC 188(PNP) transistor (or SK 100 according to relay) it's base to collector of BC 547 ,emitter to positive ,collector to negative through a 9 v relay-dpdt - (use a 1N 4001 diode across the relay coil in reverse biase for transistor's protection) connect the emitter of 547 to negative biase to a 220k (try 1M,330k,470k)to positive also the base (BC 547)to upper level sensor of tank bottom level sensor to negative in this case through a low value 1k to 470ohm resistor .Relay's one set pole (N/O and common)for pump's phase control,next pole(N/O and common) to control transformer of power supply ,this same (N/O and common) point connect a 1 A push to on switch for start the pump. Press the push switch relay will activate the pump and power supply through relay, when water will touch the upper level sensor low resistance of water will reverse biase (please try 1M ,470k 330k instead the place of 220k to keep the forward biasing at a certain point) the BC 547 the relay denergised,also the power supply.The transformer,diode capacitor and resistors will protect you from any lethal voltage from water also you can add a glass fuse for power supply.E&O Expected.
Bro keep it up... But what happens the current passes through water and some one get shocked🤔🤔🤔.......RIP.........😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️ Be Alert While using water when it plugged on🤨🤨🤨
@@ilanthendralramesh4543 I don't think so assuming charger is of 1A and electricity is of 220V AC then 1A current is quite sufficient to book your hospital bed.
@@LogicalWindow yes bro I think u don't believe twice I got shocked from charger.......that's Iam telling.....not a huge shock it effects on my hand for 2 minutes
Best video. Mai ne Jitni bhi water alarm ki video dekhi un sab apka sab se best way se bataya gya and finishing bhi zabardast ASI video Public Chahti. Mai ne Apka Channel subscribe Kya. Is tarah ke Neat and clean video Banaye sir. ❤👍
I have Made Autocut With my motor starter. which automatically turn off the motor when tank is full. just 2 relays, RO float switch and a power supply.
Nice unit but you should have kept the mobile charger as it is & saved the cost of one plug & avoided the dangers of working with mains side circuit. Another suggestion. Overflow sensing could be done at the overflow exit. That way you don't go into the tank at all & don't loose water capacity in the tank. Thanks.
Crazy. Take a PVC pipe from the mouth and leave it about one ft above ground level. Keep empty bucket. when water comes down sound of fall in empty plastic bucket will alert. Using since 15 years it works !!!
If water crosses the whole plug and then there will be current in water as water is conducting and if anyone was using the tap water may get shock. Am i correct please suggest ! U have done a great job !!
Instead of direct pluging into power supply, can we use externel battery (12V 4AH /used in bike) as a power supply for buzzer and light ? May be then shock issue can be sorted. Please suggest 👍😊
What if someone touches the water?? Tank in the water will be connected to household pipes. If there is any short-circuit in the charger point AC will get direct contact to the water, better to add fuse between the connections.
Instead of removing from charger case/box it can be directly placed in plastic box . When the charger adaptor fails it won’t get short circuited to AC . It won’t work actually .
Bro very wonderful invention. I also try it but no alarm sound and Light . I followed all steps. But i did not put one same length wire i joined 3 wires. That is problem or not Pleade tell fast bro. I want to do quickly because i go to my grandma home. Now iam in mom home.
@@LogicalWindow bro i can't understood because I am tamil nadu. So we can use only without joint wire. I put 3 joint wire. Please tell what mistake i did bro.
Sir plz don't use this way..... this is not for safe u & your family because there is live high voltage....... plz don't do this ....... if u want this type ... plz use 6V battery for power source.....
Balaji K is right. If something goes wrong inside the mobile charger unit the main power of 220-240 volt will pass on to every tap in your house. Not safe. But good for school project. Use of battery is safe.
it is a great circuit. thank you for this. but can you alter the circuit a little bit so that I can use a wireless home calling bell as alarm instead of your wired connection. please show in another video. thank you
It's not working due to low current signal the circuit doesn't complete. It's required more current signal to complete the circuit, you can use extra transistor to amplify the current signal under water
@@LogicalWindow, some time it's happening shock whatever less voltage we used, not necessary these and all, it's risky to life. Fisrt time we should observe our water tank how much time takes to fill water, after daily basis, stipulated time we can switch off motor manually.
I tried this and it works, thank you for saving money, water and electricity. Do well buddy😀
Bhai Pani me current nhi aayega yese me??
No
@@himanshu-nh8wz nahi aata bhai ye safe hai
एक ही like है तुझे देने के लिए bro अगर 100 like hote to वो भी दे देता तुझे. बहुत कमाल की चीज बनाई हे तूने
Hello sir
आप लोग अलार्म की जगह सीधा मोटर को ही off करना चाहते हैं तो मेरे channel #VikasMobileTech पर एक video है उसे देखें , No tention हो जाओगे ये मेरा दावा है,
और यदि कोई प्रॉब्लम हो तो मुझे comment में बताना मैं आपको whatsapp के थ्रो बताऊंगा Ok
दमदार वीडियो है ये ,पर पंप और अलार्म दोनों के स्विच को एक कि आउटपुट से ले सकते हैं ताकि मोटर बंद तो अलार्म भी बंद वरना पानी लेवल जबतक कम नही होगा अलार्म बजते रहेगा ।।
Great job yaar
Bulb bina rasistanc ke fuse ho jayega
सही पकड़े
It's works bro thanks 🙏🙏🙏🙏for doing this thing ❤❤❤❤. May God bless you 🤞
Pl use a 9v battery instead of charger/ adopter to avoid electric shock due to any defect in charger/ adopter. The battery will last for a year. I am using it.
Really, I would like to try
Right
And the othe simple way is ... just buy wireless calling bell and put the swith at the tank and bell wherever u can place .. it will comes with atleast 10 mtrs range
But in that case we need to charge battery time and again
Bro if i use 9v battry its not working bro...please give circuit diagaram
At water tank use one ball or any plastic item witch will be lifted and should close the circuit then sounds buzzer to avoid shock or any other problems
Its dc current i think.
Idiot it is sc current
@@manjunathb370 the cell phone charger ic converts the ac to dc. nothing to be afraid of.
@@subhambanerjee2994 A limit switch can be used for closing the buzzer circuit. It can be easily attached with a float. Then we can avoid the contact with water completely. The system become 100% safe.
@@SaiKumar-wk4mk yeah that would make the ckt more safe..👍
Its is 100% working .I tried. Thank you for this Video
Nehi.
hi sir, I have Robo India PBUZZ5 Pizo Buzzer bought from REES52.When I short two pin , it buzz.But doesn't buzz in water.
Right
Bhai..
Mai bohat Dino se soch raha tha eysa hi koi device banau...
Aaj dekh ke bohat achha laga...
Mai bhi lagaunga...
Very nice...❤️❤️❤️👍👍👍
What u done is easier but where u done is creativity 👍😊
We need these types of men's🙏in 🌎
I really appreciate the efforts done by you, each and every step is mentioned clearly.👍
isse current ka koi issue toh nahi hoga na?
No
@@LogicalWindow kitna volt current two pin plug me pani me jata hai
It's 5 V DC current.
@@LogicalWindowkya isme 2 speaker laga sakte hain
Very useful... I always feel so sad when me n my family end up wasting water due to overflow of tank.
This method will save water & electricity both. My tast for this weekend.
donho cable pani main dubte hai to shock ka to khatra nahi
I already put my finger in water tank and explained it in New video. Watch the new video.
But problem of current when adaptor will burn?
Indicator led not working. Mostly a resistance should be adopted before bulb. Pl clarify. Other things OK.
I have a Sinicon Automatic water level n pump control system but I don't know anyone who will com hom n fix for me. I live in Hosur.
Water tank on 2nd floor terrace.
Bhai mai jaldi video like nahi karta but aapka itna solid video dekh kar like kiye bina nahi rah paya.
Actually I was looking for this kind of video brother coz recently I build my own house and most of the time water get overflow from tha water tank.
But now I'll definitely install this thing in our home.
Once again thanks a lot brother for this useful videos👍
Very useful, everone should try this,millions of water will be saved in India
Water ki count millions m hoti h, aaj pta chala🤣
Save time too. You are so clear bro. Clearly explained.
@SHADOW # GAMING sach me?
बोहत अछ्छी है ए वीडियो
मै बि मेरा वाटर ट्यांक मैं बनाया है 100% सैक्सेस हैं
आपको बोहोत बोहत धन्यवाद,🙏🙏🙏🙏🙏🙏
Bhai charger chalu tha kya
This is what I was looking for thank you soo much
You have given nice knowledge to people who don't know.
You have done very hardwork & clearly you shown us
See my practical th-cam.com/video/m2qTlDeSh04/w-d-xo.html
Wow u great
Everyone should make this product
Aapka bahot bahot dhanyawaad, maine ye chiz bana li hai aur work bhi kar rahi hai. Thank you very much.
good brother with minimum investment we can make it at home and save water as well as money.thanks bro..keep going god bless you
Dont try this it socks you.
Interface quit qrrzyffedgdvtrffq
Kjhteddfdr
Wrong. This only 4.5 volt dc current
It is very good idea to save water
SAVE WATER SAVE LIFE
Hello Sir,
यदि आप चाहते हो कि टंकी फुल होने पर मोटर automatic off हो जाये आपको बंद भी न करनी पड़े
तो आप मेरे चैनल #VikasMobileTech
पर जाये और इस की video देखें
मैं 100% गारण्टी के साथ कह रहा हूँ आपको इसके बारे में कोई नहीं बताएगा ।
यदि आपको ये system बनाना है तो मैं बनाऊँगा। यदि मेरे ऊपर भरोसा हो तो मेरे चैनल को सब्सक्राइब करके मुझे भी आगे बढ़ने का मौका दे और मेरी सभी वीडियो जरूर देख
यदि आपको बनाना हो तो मुझे reply कर देना
आपको whatsapp नंबर send कर दूँगा,
One of the best video in youtube. Good information bro. Problem solve . Thank you very much. Bro luv u 🍬🍬🍭🍭🍭🌹🌹😍😍😍😍😍
Behat purana trick hai lekin accha hua aapne proper video banaya
Thank you for giving good idea for save God gifted pricious water, thank you bhayya
Waise current marega tumhe tb pta chlega
No problem.
@@LogicalWindow bro Mi ya samsung charger se hoga kya
Ha, hoga.
@@LogicalWindow but Samsung or mi charger to khulte nehi to bina khole hi karna padega
I LL try it after lockdown thank you
😂
Hlo
Really?
Abhi try krna....!!
Priya lockdown m ungli maar rhi ho ki nhi
I did it today. Working fine with battery
Which battery
@@Skr9232 tv remote battery
Unless you don't add salt in water the buzzer won't works
@@sanjevpradhan1870 no, it will work but you need to put two wire closely
Yeah, i kept it too close but still not worked. Just tried once
Keep it up,
Love From Muzaffarpur Bihar India ❤️❤️
Pahle mera bhi water waste hota the phir youtube ne ye video recommend kiya
ab mai paani aur future dono save kar raha hu
Wow 🤩 this is what i was looking for. Thank you soo much. You are a genius 👏
Success dude! I’m saving my current and water. THANKS
Bro adhi nv a charge Ni use chesav bro
Beleive me i was think for something like this to stop water wastage ... To save water i had to keep a chk on tank and sometimes stand beside it for a long time in heat... Thnks to you now m gonna definately give it a try
every time our water tank overflows as usual water and electricity wastage! thank you for such amazing idea
Supper anna nice thanks .👌👌👌💐
Instead of beeper, connect a relay coil in series, and use the output to switch off the pump. This will help to save water, even if nobody is at home!
What is a relay coil
@@pkabhi5284
Relays are used where it is necessary to control a circuit by an independent low-power signal, or where several circuits must be controlled by one signal. It is commonly available and widely used in such logics.
@@pkabhi5284 relay is a automatic switch
If we use relay, when water level just decrease motor will on automatically 🤔,
@INOTFRANK
Yes, you are right, but in case of emergency, or in case of human error, it can help.
Love This..!!
🥰
i’m always watching you..:
😊
keep it up 💖
Simple and EXCELLENT, done good job.
Nice idea bro.. Love this. I'll try this for my science fair
Don't separate buzzer connection connect them with motor so it can easily get on and off at the same time from a single switch
100% right,I think as you
With auto cutoff setting very usefull
Harshjoli u r 100% correct. Connecting the alarm with motor can save time, electricity & wastage of water. I'll connect this alarm with motor through a single switch.
But connect by using charger only..
मारेगा क्या भाई?? AC को पानी से connect
It is a crude version with less safety, don't use a smps power supply.Use a small transformer power supply and add a BC 547 transistor it will manage all safety concerns and even control a relay.Wire the relay in DOL starter mode .If you have ideas in electronics you can make water level sensor using reed switch and magnet at very low cost.
Sir if u hv water level alarm diy project reply with link.
Shinu Varghese
Superb....would u confirm what all items needed and how to do it?
Shinu Varghese excellent
that's right! if the water is low the water pump start without pressing start and stop using a relay and relay coil has low consume power you can use indicator lamp instead buzzer because buzzer can disturb other people
I made this circuit in my teenage (that days we never got appreciation only scolding) ,as an electronic hobbyist (30 years back) .I can explain the circuit briefly, an npn transistor (BC 547) connect it's emitter to negative of power supply ,base to a 10k (try 4.7k, 2.2k,1 k according to mineral ion content in water) resistor other end of resistor connect to tanks overflow level sensor by wire (finolex telephone wire, 2 pair or same) .Bottom level connect to positive of power supply by wire (pair of tele wire) ,collector of transistor connect to negative of 12v DC buzzer , it's positive is connect to positive of power supply.Tank level sensor made by a 20mm pvc pipe with a height of tank , two turn of tin (it will resist corrosion) coated bare copper wire (use the same Tele wire after removing the insulation) over the pipe for bottom level sensor and upper level sensor ,the wires from circuit connect to this .Use 6 0 6 500ma (or 0 /12) transformer, bridge rectifier and a 1000mfd capacitor as filter for power supply.Use three or for transistor(same circuit), replace buzzer with LED and 470 ohm resistor for showing different tank levels if you needed . When water reaches the upper level the transistor forward biased it conduct, buzzer will sound you can off the pump manually.Control the pump with relay use a BC 188(PNP) transistor (or SK 100 according to relay) it's base to collector of BC 547 ,emitter to positive ,collector to negative through a 9 v relay-dpdt - (use a 1N 4001 diode across the relay coil in reverse biase for transistor's protection) connect the emitter of 547 to negative biase to a 220k (try 1M,330k,470k)to positive also the base (BC 547)to upper level sensor of tank bottom level sensor to negative in this case through a low value 1k to 470ohm resistor .Relay's one set pole (N/O and common)for pump's phase control,next pole(N/O and common) to control transformer of power supply ,this same (N/O and common) point connect a 1 A push to on switch for start the pump. Press the push switch relay will activate the pump and power supply through relay, when water will touch the upper level sensor low resistance of water will reverse biase (please try 1M ,470k 330k instead the place of 220k to keep the forward biasing at a certain point) the BC 547 the relay denergised,also the power supply.The transformer,diode capacitor and resistors will protect you from any lethal voltage from water also you can add a glass fuse for power supply.E&O Expected.
हमें आपका ये जुगाड़ बहोत पसंद आया। हम जरूर बनायेंगे।👍
Nice video today in my dream I got this idea got to know how to do it 💡❤️
th-cam.com/video/wJnnaNanROM/w-d-xo.html
This was helpful for me too thanks bro 🙂🙂
Save water,save electricity,..save money...nice and superb bro✌️👌👏👏
Great idea sir ji
I have applied at my home successfuly
It is a simple and effective idea, good work, keep doing.
Bro keep it up... But what happens the current passes through water and some one get shocked🤔🤔🤔.......RIP.........😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤕🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢🤢☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️☠️
Be Alert While using water when it plugged on🤨🤨🤨
Bro so only charger is used it acts as rectifies the current and less the current and voltage passing so no worry bro
@@ilanthendralramesh4543 I don't think so assuming charger is of 1A and electricity is of 220V AC then 1A current is quite sufficient to book your hospital bed.
It's 5 V DC current. Have you ever got shocked from mobile charger?
@@LogicalWindow wow wow super bro ,
@@LogicalWindow yes bro I think u don't believe twice I got shocked from charger.......that's Iam telling.....not a huge shock it effects on my hand for 2 minutes
Good presentation, keep it up.. Good module concept. With flow chart and circuit diagram
Isme bhi diagram chahiye
Wah bhai
Thanks man... I did it at home and it works perfectly... No more electricity n water loss...
Best video. Mai ne Jitni bhi water alarm ki video dekhi un sab apka sab se best way se bataya gya and finishing bhi zabardast ASI video Public Chahti. Mai ne Apka Channel subscribe Kya. Is tarah ke Neat and clean video Banaye sir. ❤👍
Thanks 😊
@@LogicalWindow www
This is the use of mind I totally loved it and made it for my water tank
Best and simple idea for saving water and electricity ! 👍
T
th-cam.com/video/wJnnaNanROM/w-d-xo.html
This is a proper tutorial. Pls make more with simple stuff
I made like this similar one( Over head Tank alarm) 2008 in my school days for a science fair competition
Vlot ..220 thaana...ellamea aalaram ella
Thanku dude ist real vedio when you inter your camera tank and proof working,,thanku for your hard working,,,,
If someone using the water of the tank and at the same time water level reach the plug?
Will electricity flow to the body?
No
Why?
Charger is a small transformer that convert high AC voltage into low DC that is why you don't set current during phone charging
@@vipulrobin thank you
No
Bundle of thanks for uploading such kind of knowledgeable and useful video.
Bahut badhiya bht Mehnet ki ek like to banta hai
In this video u r used a open plug 🔌 in water tank. Is there any shock produces when water touches tat plug.
No. It's too low because the open plug in the water tank is the end point of Mobile Charger. It's output is same as mobile charger. It's safe.
Thank you 😊
You Welcome
Bawlai gand hai ky
@@LogicalWindow what happens when we don't use a mobile charger insted of 2 pin adapter??
U don't need extra switch for Alarm connect this in Starter..Other wise u have to switch on Alarm switch..
How to ? Any video please
You can add a relays on motor s main switch
And it’s cutoff connection from your alarm system and you can make a automatic switch
I didn't understood a word of you 🤭 what's a relay?
Sunil Gupta
You can see relay 12volt on google images
And it work its a simple switch witch is operate on various volt
@@SunilGupta-be1kc I have designed a circuit for autocut motor. give me your email and I will send it to you. easy to design and install.
@@SardarJiSpecialAdventure rohit1995gahlot@gmail.com
Bro can send me also
@@SardarJiSpecialAdventure Can u send it to me Please. its yadavvipinmathura@gmail.com
Thanku thanku so much Mujhe project me yahe banana tha apne achi tarah se explain kiya thanku sooo much
Why not arrange for cut off of pump.
Great electrical engineering effort.
Well done
I have Made Autocut With my motor starter. which automatically turn off the motor when tank is full. just 2 relays, RO float switch and a power supply.
sorvi kalra how bro
sorvi kalra give me circuit diagram
@@selvaselva9952 amm I haven't designed any CD. but I can do it for you
@@selvaselva9952 Give me your Email
selvasurya026@gmail.com
Thank you sir for this awesome idea I will definitely make this project
Plz careful if your using charger adapter that 2 pin only , there is no earthing, leakage current will flow through water. Take care
You mean Mobile charger with 2 pin is also dangerous?
great man----------- how creative --------------- so simple-------------- i have all parts ------------ now i am trying
Here we can avoid direct contact of water. We can use float for closing the circuit..
No worry.
The voltage will not exceed 6volts dc.
Whats a float?
@@that1828 rarecomponents.com/store/2043
Nice unit but you should have kept the mobile charger as it is & saved the cost of one plug & avoided the dangers of working with mains side circuit.
Another suggestion. Overflow sensing could be done at the overflow exit. That way you don't go into the tank at all & don't loose water capacity in the tank.
Thanks.
Crazy. Take a PVC pipe from the mouth and leave it about one ft above ground level. Keep empty bucket. when water comes down sound of fall in empty plastic bucket will alert. Using since 15 years it works !!!
But the motor over fills the tank and water comes down to fill atleast 3 buckets full.
No, it depends on the power and pressure
Nice model. Video making super 👌👌💐💐
-Chandu Durgam (physics teacher)
If water crosses the whole plug and then there will be current in water as water is conducting and if anyone was using the tap water may get shock. Am i correct please suggest !
U have done a great job !!
It's 5 V DC current. No problem.
It does matter what voltage is but current will flow to water and it's not safe
Instead of direct pluging into power supply, can we use externel battery (12V 4AH /used in bike) as a power supply for buzzer and light ?
May be then shock issue can be sorted.
Please suggest 👍😊
@@ahzarahmmed3822 No problem at all because u are using dc 5v that to charger which contain diodes, and diodes does not allow reverse flow.
Yes
Best way to save much water...
I have a suggestion: you should input electricity with the pump input so that with a single switch pump as well as alarm should be switched off.
Yes. I already did that.
I agree,
@@LogicalWindow sensor bnbana he pani Wala nhi koe or contact kese karo apko
Then current flow nehi karegi.
Very good.pls develop automatic system.
Wow u r great
Everyone should make this product
What about the current...it will pass through whole tank when ur giving direct supply with water...
No
@@LogicalWindow
The current will go through the water .... in that case there is a possibility of danger
Only 6/9 volt DC pass through tank water.
It's 5 V DC current. No problem
What if someone touches the water?? Tank in the water will be connected to household pipes. If there is any short-circuit in the charger point AC will get direct contact to the water, better to add fuse between the connections.
You are right brother, why not reply inventor.
It's mobile charger. If a charger failed then mobile got electrified?
Instead of removing from charger case/box it can be directly placed in plastic box . When the charger adaptor fails it won’t get short circuited to AC . It won’t work actually .
Great invention, it's worked for me, I have small doubt, What in case wire fully dipped in water n that time anybody touches water....?
No problem. Voltage is very low.
Its dc current...no tension
@@arindambora2503 yeah charger converts ac into dc😊
Very nice video. I tried it and got success result. Very very thanks for the public eye opening experience
You can use a 9Volt battery for safety, instead of charger
How to use 9V battery instead charger?
@@asishkumar9432 kyuki vo speaker km Volta me bhi chl jaeyga
@@asishkumar9432 replacer charger with battery in same ckt
I'm using 9V battery costing around Rs 15/-, almost year passed, still alarm giving good sound. Filling water in the tank every second day.
Asish kumar The output voltage from the charger connect 9v battery on that.you can also use a SMF battery about 4 -6v,which may be 4.5ah.
Bro very wonderful invention.
I also try it but no alarm sound and
Light .
I followed all steps.
But i did not put one same length wire i joined 3 wires.
That is problem or not
Pleade tell fast bro.
I want to do quickly because i go to my grandma home.
Now iam in mom home.
Watch my New video related to it.
@@LogicalWindow bro i can't understood because I am tamil nadu. So we can use only without joint wire. I put 3 joint wire.
Please tell what mistake i did bro.
Sir plz don't use this way..... this is not for safe u & your family because there is live high voltage....... plz don't do this ....... if u want this type ... plz use 6V battery for power source.....
@@balajik7641 here also voltage is very low...we are using charger...and do you know output of charger is very low
Balaji K is right. If something goes wrong inside the mobile charger unit the main power of 220-240 volt will pass on to every tap in your house. Not safe. But good for school project. Use of battery is safe.
How are you qualified sir?? I really impress by u..
Master of electronic 😀😀😀😀
@@thesmarttips5374 😆
Abcd of engineering..😀😀
Wow bro it's really awesome.
Thank you 😊
When the power supply is ready with a two pin plug, instead of attaching the buzzer to it, why have you done so much extra work? Your idea is good
This is called perfection
Not at all being an experienced person , he should finish it by sticking buzzer to the place where box attached
Awesome bro.. a brilliant idea. Thanks for sharing this video.
Main toh pakka aisa banaunga. . But itni clearly video dislike kon bc na mara.
Nice job, nice video...👏👏
This apparatus will SAVE WATER & ENERGY 😊
Zabar daaaaaaaast jugad.
Love it.
You are Mega Mind.
Sir if i attach a earthing connection then will stop from any accidents if by chance forgot to close the switch of the buzzer?
No tension. Voltage is very low.
Ab mere extra charger kam aayenge😂😂thank you 🌷
Hahaha
Kindly Make a vedio on automatic ON & OFF of motor when water gets EMPTY & FULL
Bhai koi kaam khud b uth kr krlena itna automatic kyu ho rha h 😐😐
it is a great circuit. thank you for this. but can you alter the circuit a little bit so that I can use a wireless home calling bell as alarm instead of your wired connection. please show in another video. thank you
Good. Avoid AC pin at sensor side. That will make confusion for others. Avoid accidental / mistakes usage.
It's not working due to low current signal the circuit doesn't complete.
It's required more current signal to complete the circuit, you can use extra transistor to amplify the current signal under water
I agree, my tank is in second floor and due to the length of the wire, its not buzxing. Complete line loss
u have made tremendous video.
i mean the videography for understanding.
thank you bro ise banane ke liye mene science exhibition me second huyi
This is awesome. Thanks for sharing.
*Only 18* 👇👇👇
784584.loveisreal.ru
Nice
Chance to get eclectic shock through entire water pipe line, it's dangerous
No. Voltage is very low. Mobile charger voltage is 5 V only.
@@LogicalWindow, some time it's happening shock whatever less voltage we used, not necessary these and all, it's risky to life.
Fisrt time we should observe our water tank how much time takes to fill water, after daily basis, stipulated time we can switch off motor manually.
@@pinjarimoulali5290 200% It will not get shock bro.. it's using just 5V DC .. it's safe to use
I am agree with you
Its dangerous...
Charger could be fail sometime...
excellent idea !!! i will try on my science experiments as water overflow alram
But koi pani ko touch kar le to vo to gaya na
No problem.
Sir up to geneou hoo, up koo dak kar mana ve ak banaya hai, Thank you, mara problem solv ho gaya🤗🤗🤗🤗
👌💯 Simple explanation with rejected items. God Bless You
Thanks bro for this idea...
I shall use this same idea and implement this in automated cuttoff for my home pump
Riyaj
Contact for automatic and semi automatic pump controller m.no 9028328803
When alarm is on that time if we use water in another tap, that water if we touch short circuit will come?
No. Voltage is very low. Mobile charger voltage is 5 V only.
Right
Yes
Please prove
Touch and prove it sir
Thanks for simple solution 👍