Hi, Could you please tell me at what height from the floor did you install the bed frame, and what clearence do you still have from the bed platform to the roof ? Thank you!
Hi everyone, what material did you use to upholster the interior of the vehicle? (gray) What is the name of the fabric or a link to where you bought it and is it self adhesive or did you use spray adhesive? Thanks
@@DDSRacing Don’t know what the name is unfortunately. It was bought at a local interior shop. It can stretch in all directions. You need to spray adhesive on both the wall and to the back side of the fabric 👍
Thanks it’s a sort of plywood with a brown blank surface. And then all the screws where spartled and sanded down. To finish off it was wrapped in high gloss kitchen foil😊
Is there any way of me getting more specifics without it being too much stress? Maybe the full un edited video and some measurements/ materials for the bike area please? 🙏🏾
Love the build! I have been thinking of the same thing, did you opt for just the 170 or did you go 170 ext? Would love to see some shots of the bikes in there. Thank you!
If it is regarding the length it is a Long model sprinter van. This model comes in 4 lengths. Short, Medium, Long and Extra long. So this is the Long model, which has the long wheelbase, but not the extended version. Height is also the high model, but not the extra high with the funny "top" on it. (It has to be a long and high model as minimum to do what I did here, everything is measured down to the last mm). Sure here you go: prnt.sc/LSC63M5KUXrH
Hi, sorry for late response. Bed frame is made out of aluminium T-proflies that is bolted into the chassis with submerged bolts. After that all the ends are welded together. The bottom of the bed is made with 22mm plywood, bolted onto the aluminium frame :-)
Around 18.000 USD for the interior part. Did a lot of work with the exterior aswell, fresh paint, wrapping etc which is not included in the above price :)
I am a new follower(nr:76) of your channel Greetings from Türkiye 😊
From one Brapp van fam to another 🇨🇦 😊
Hi, Could you please tell me at what height from the floor did you install the bed frame, and what clearence do you still have from the bed platform to the roof
? Thank you!
Simply lovely 😍
Thanks 🙌🏽😀
Hi everyone, what material did you use to upholster the interior of the vehicle? (gray)
What is the name of the fabric or a link to where you bought it and is it self adhesive or did you use spray adhesive? Thanks
@@DDSRacing Don’t know what the name is unfortunately. It was bought at a local interior shop. It can stretch in all directions. You need to spray adhesive on both the wall and to the back side of the fabric 👍
Great build!
What is that white panel material you used to finish of the motorcycle space?
Thanks it’s a sort of plywood with a brown blank surface. And then all the screws where spartled and sanded down. To finish off it was wrapped in high gloss kitchen foil😊
Can you provide a link to that kitchen foil so I can understnad what type is it? Thanks
Is there any way of me getting more specifics without it being too much stress? Maybe the full un edited video and some measurements/ materials for the bike area please? 🙏🏾
any pictures with bikes in it?
prnt.sc/LSC63M5KUXrH Here you go :)
Love the build! I have been thinking of the same thing, did you opt for just the 170 or did you go 170 ext? Would love to see some shots of the bikes in there. Thank you!
If it is regarding the length it is a Long model sprinter van. This model comes in 4 lengths. Short, Medium, Long and Extra long. So this is the Long model, which has the long wheelbase, but not the extended version. Height is also the high model, but not the extra high with the funny "top" on it. (It has to be a long and high model as minimum to do what I did here, everything is measured down to the last mm).
Sure here you go: prnt.sc/LSC63M5KUXrH
@@simondoolewerdt2680 you are the best thank you!!
Do you do conversions now ? For others ?
Lovely looking build. Can i ask what paneling you used for the garage area? Thanks
Plywood with a brown blank surface. Wrapped in high gloss kitchen foil afterwards 😊
Wow 👍
Which model sprinter is this? Awesome
Build
Sprinter 170 model ..
Thanks. It is a sprinter 316 2010 long model :)
Ficou muito linda, Desculpa vou ter que copiar vc 😅😅😅
That black rubber around the windows inside, wicht size is it? Thanks
@@jurgenpluxy9828 standard window sealing from Mercedes
Hiya, what did you use to make the bed frame ? Thanks
Hi, sorry for late response. Bed frame is made out of aluminium T-proflies that is bolted into the chassis with submerged bolts. After that all the ends are welded together. The bottom of the bed is made with 22mm plywood, bolted onto the aluminium frame :-)
How much did you spend on it in total?
Around 18.000 USD for the interior part.
Did a lot of work with the exterior aswell, fresh paint, wrapping etc which is not included in the above price :)
👍🏠✌️
Total i orden det der
First like