Hey question i have a 1993 accord ex wagon , i install a avital alarm 3100l it has factory electrical door locks. But for what ever reason the alarm does have enough Neg- plus to open or lock, i tried 2 , 5pin relay and they work to open and close... but does that 451m also work to give a strong neg- volt? Instead of using the bulky 5 pin relays ?? Thanks!
I installed the Avital 3100 system in a 2009 F150 that has aftermarket door lock actuators. The driver door lock actuator has 5 wires: Black, White, Brown, Blue, Green. How do those 5 wires connect to the 451m harness? Thanks very much
Im sorry if im asking a lot of questions. But if i have just basic lock actuators. Can i just hook them straight up to the blue and green without the relay? I wont have the relay in time for the install. Just wondering if it would still work the same🙂
I connect the brown and white to the ground and purple to the 12 v and blue and green to actuator and nothing is happing is there something wrong that I’m doing ?
I have the same and exact alarm system and I wired it up my 2005 Honda Civic exactly as you did in the previous video(alarm install one). Everything on the alarm side works, but when it comes to keyless entry only the lock function works on my actuators(tried multiple ones). Why doesn’t the unlock function work? Any ideas? Thanks
The Late Model Tech so I set double pulse unlock to on and the signal sent to the actuator to unlock the door still isn’t occurring. Can I message you pictures of what my set up looks like to see if you can help? I appreciate your response! This is literally the last thing I need to complete my installation and I’m kind of stuck😅
Good video man! Awesome job!
someday i will be watching this video again with my own r32 setting up keyless entry too
Sure wish AutoZone would start selling yo-yo again 😂
Hey question i have a 1993 accord ex wagon , i install a avital alarm 3100l it has factory electrical door locks. But for what ever reason the alarm does have enough Neg- plus to open or lock, i tried 2 , 5pin relay and they work to open and close... but does that 451m also work to give a strong neg- volt? Instead of using the bulky 5 pin relays ?? Thanks!
Great videos bro👍 in what part of Texas do you live at?
does the 451m does the trick for reversing polarity for a dodge ram ?
Ground the purple wire don't hook up white and brown . Use the green and blue with the provided resistors.
I installed the Avital 3100 system in a 2009 F150 that has aftermarket door lock actuators. The driver door lock actuator has 5 wires: Black, White, Brown, Blue, Green. How do those 5 wires connect to the 451m harness? Thanks very much
When installing 2 actuators do you just tie the blue and greens together then connect to the 451m?
Yes
@@Donnythelatemodeltech thank you!
Im sorry if im asking a lot of questions. But if i have just basic lock actuators. Can i just hook them straight up to the blue and green without the relay? I wont have the relay in time for the install. Just wondering if it would still work the same🙂
i have the same question. 🤣🤣 what is the final result? Have you hooked up the relay for the actuators?
You can but risk frying the brain if anything back feeds use the correct relays and rect. Diode
would this process be the same on a sedan or would i need to buy a different actuator for the extra 2 doors?
Same
@Donnythelatemodeltech Thanks for replying on such an old video. Awesome job man! 👏
I need some help I just got the 451 relay and connected it to my 1990 chevy and it doesn’t seem to work
I connect the brown and white to the ground and purple to the 12 v and blue and green to actuator and nothing is happing is there something wrong that I’m doing ?
I have the same and exact alarm system and I wired it up my 2005 Honda Civic exactly as you did in the previous video(alarm install one). Everything on the alarm side works, but when it comes to keyless entry only the lock function works on my actuators(tried multiple ones). Why doesn’t the unlock function work? Any ideas? Thanks
You might have to set the alarm to double pulse unlock. Look in the programming section in your book.
The Late Model Tech so I set double pulse unlock to on and the signal sent to the actuator to unlock the door still isn’t occurring. Can I message you pictures of what my set up looks like to see if you can help? I appreciate your response! This is literally the last thing I need to complete my installation and I’m kind of stuck😅
Facebook messenger
InstaGram messenger
@@adbenjamin25 did you ever figure it out I just wired the same set up to 94 integra and only have lock with no unlock function
If I want to add two actuators for both doors, can I splice both to the single relay output/input?
Yes
Awesome man. Thanks for the reply.
What would I need to do if I just wanted to install the actuators without an alarm?
Just buy a cheap central locking kit for either two or 4 doors lol..
How does the other side door work without a second actuator?
The other side has an actuator installed also
@@Donnythelatemodeltechhow do you wire the rest of the actuators to the alarm system?
Could I use some 14ga speaker wire to run to the door lock actuators?
Done it many times