Thank you for this video - I thought I was the only person having problems with the Cameo 4 Pro. I'm having no end of trouble with mine (sketch lines are fine but cuts are all mis-aligned. It seems like the mat slips when I try to cut on the 24in mat but smaller mats seem to work okay), and am in contact with the Silhouette Support team. I received my machine in March, but have yet to make a successful cut on the 24in mat, which is frustrating because I upgraded to the Pro to be able to make wide cuts. Your video has given me hope that issues can be resolved!
@@brettpassmore6070 it transpires that the mat that came with the pro was too flexible and thus was sagging when I attempted cuts. Our retailer provided us a new mat and we've been fine since!
I could never get registration to work consistently. I added two LED lights shining down into where the blade is. Wala! I also stopped using Silhouette mats and started using thicker mats. That's helped get it to go in evenly.
I have also been using an older (dark blue) Graphtec Craft Robo Pro 2 for several years, but the drivers don't always work well with Windows, especially Win10, so I usually use my Cameo (1) most of the time for decals. I've been hoping to get the Cameo 4 Pro for quite some time but it just never quite fit into my budget, until recently. I noticed the recent flash sale and I jumped on it. Pretty bad that it took Silhouette three months to resolve your situation, when it was something simple....the blade. That should have been the first "fix" they should have recommended. I love your "famous last words"....my family says that too! 😁
Yes it was a chaotic time. To be honest, I still have issues with the machine - mainly cutting long designs. I will be phasing over to the Cricut Romeo soon, it has much better accuracy in my opinion.
My Cameo Pro didn't cut properly and had serious issues with registration. Returned mine and got the cameo 4 and had ZERO issues. Theses pro models are known for faults and told by seller that multiple units have been defective and returned.
OK, so I have had this for 2 plus years and never really worked with it. I just bought the Cricut Venture. IDK what I should do with the Cameo Pro ( Should I keep it?). The software was a tough learning curve so while I love the design store I couldn’t do it
Cost and it only being a hobby to me was the deciding factor for not going to the pro but did move from the portrait to the cameo 4... sorry if this sounds bad...but I was glad to see that you had a problem from unboxing...mine unfortunately was from being a typical guy...don't need instructions... machine needed firmware update and the usb connection wasn't being recognised...of course I contacted my seller who put me in touch with silhouettes sister company here in the UK and they had my machine for 3 months..but got it back and it was working...until it needed another firmware update...when I first set it up Bluetooth automatically came on and set up went ahead...so usb set up never got done...so I had to uninstall everything... reinstall making sure Bluetooth was turned off... actually turned it off on my laptop as well...did the usb set-up then switched Bluetooth on then did the Bluetooth set-up...like yourself now have the machine showing twice...usb and Bluetooth...took over a year during lockdown to finally get it sorted... So now you know why I said it was good to see you also having a problem...can I also say your unboxing and set up was the best in showing how to step by step... though sorry you didn't also do the getting the free designs etc as there is bound to be those setting up for the first time...or have moved from a different machine.. That said keep up the good work..
Love all your videos! Do you regret purchasing the Silhouette 4 Pro? I got mine for Christmas and haven’t opened yet. I’m so scared because of all the problems people are having.
Omg I am so excited for you! I received my Pro just before Christmas. I am new to vinyl cutting machines. What I am struggling with is loading my materials going in straight. 😫 Luckily my machine cuts just fine.
This is the same issue I am having and it really is a horrible design!! They should have just made the machine bigger and not make all those changes because it sucks!!!
Hi I’m watching your video, thinking to get a cameo pro , for me main reason I want to get this machine is for size, I have a question does vinyl rolls come is 24 just like the machine?
I've been eye balling the pro just because of the size. I wouldn't use the huge width but very rarely. I see alot of people have issues with it. Would it be better to buy a plus vs the pro? Just to save on issues. Thanks!
I would either go basic or pro, not the plus. I still use my pro simply for the fact that I can keep my 20-inch pieces of glitter htv in sheets longer than a foot. You can't do that with the plus, since it's 15 inches. If you're rarely using the width to its potential, save the money and get the basic.
I am trying to cut without a mat on 24" wide vinyl. I keep getting a message that the selected media is too wide to be used with the specified Silhouette. I have the Cameo Pro. I have no idea what's wrong.
A couple things: 1. Make sure your Cameo Pro is connected and selected. You may need to click the button at the bottom of the send panel and select the Pro. 2. You may need to update your mat or media size. Make sure you have the 24 inch mat selected. Let me know if either one of these help!
Hello, I cant get my mat to feed correcrtly. mat keeps slipping all over the place. It doesn't appear to be locking down on the right side. Can you help?
I can try! What does the lever on the right side look like? When you move it, is the bar clicked down? Also, is the small white slider/roller on the right sitting on the edge of the mat?
Could you comment a little on how the pro compares to more industrial 24” cutters? How do they compare? Is the Cameo Pro worth it? What other 24” machines compare to the cameo pro?
The Cameo Pro is great for crafters who want to move to a bigger machine without the intimidation of other software. However, it uses a stepper motor and its slower than other industrial machines. If you are going to be going to a higher business level, the Graphtec or Roland 24 inch machines are great ways to get in.
@@LisaPottsDesigns thank you for your honesty and your response. I know it’s loud. My 4 is loud, but I prefer it over my CRICUT. I would get the Romeo if I could afford it. Again, thank you so much.
i have had mine for a few months. I do not use a mat. but some of my designs it will move the carriage all the way to the right of the machine and start cutting from there, even if my settings are for a 4 x8 , positioned on top left of material view. I am not a proficient user however why are some designs doing this and others are not.
Hi, Thank you for making this nice video. Have you ever cut fabric with it? And specifically stretchy fabric? I'm thinking of buying this, but I want to make sure it works for it first.
Hi Sara, have you found videos of the pro cutting the stretchy fabric? Have you bought it and tried? I want it for the same thing but I want to be sure it works
@@tiffenydecoteau4037 Hi Tiffany, sorry it took me so long, I never saw the notification for this. Actually I realized that the sticky mats ruin the elasticity of stretchy fabrics, and since these cutters need the sticky mats, they just don't work well with stretchy fabrics, the actual cutting worked well with the rotary blade though
Can you look at the defective blade and see what the problem was ? Why was it defective ? is it possible for you to see ? can you take it apart or cut it apart and look to see what the problem was ? Do you have a favorite forum you go to to ask questions ? How long will your cameo 4 pro cut and specifically how thick of material will it cut. ? Sometimes the manuals do not disclose these things. Does the word pro in cameo 4 mean that it is a 24" ?
I think it had a small crack, but to be honest, I didn't get a good look before I threw it away in frustration. haha. The cutting time varies based on frequency and materials. For example, vinyl doesn't wear the blade down quickly, so at least several months. Things like paper really wear them down, so it could be faster. The Pro does mean its 24 inches 😊 There are also a ton of great Facebook groups, including mine linked in the description.
I just came across your videos. Where is the SN etc info for my the machine so I can register my new machine. I got mine yesterday. I haven’t set it up yet. Do you know of a very affordable stand that is workable with the cameo 4 pro? I’ll be watching your cameo 4 Pro videos. You’re very down to earth, I like that. I also have to learn the software silhouette business. I need to do scanning in stamped and cuts that I cut from paper craft dies (to resize them as needed). My machine was on back order for 2-1/2 months so I hope I don’t encounter blade or feed problems. Thanks for your help!
The SN should be on the back of the machine. I don't necessarily use a stand, but I like to have a desk to put it on. This lets me turn the machine if needed, and it's a bit more steady. Always here to help! Feel free to join my Facebook group. It's linked in the description.
Hey thanks for the video, problems with mine from the get and also a faulty blade, I'm just wondering have you found that you actually cut up to the full 24" with this? I've tried cutting a simple square and it comes out of the rollers no matter where I place them 🥴
Ugh I just unboxed mine and got it registered and did the setup opened my software hooked it to my laptop and the software is not recognizing my machine. What do I do?
Can you please help me. This is my second time using Comeo 4 Plus, but rigth now it doesnt show me the sent Icon on the button in the screem? Of course let me design but choose what kind od paper i am using... another the first time i used it cut perfect, but later only cut have a way i had to tose the material I relly appreciate your help
@@LisaPottsDesigns i got my pro and my first use was on the forever subli-flex 202 . My first cut was successful thanks to your videos on cut settings.
#REPLAY 3 years later, and I have found your channel. I’m planning to purchase the Silhouette Cameo 4 Pro on 2024 Amazon Prime Day. I already use the Silhouette Cameo 4, but it’s time for a 24 inch cutter. I also need a wide format sublimation printer. Epson preferably. I inks are much more affordable.
for the price of that cameo i could buyu 2 rolands 24inch models fgrom us cutter or prob of other brandsa. that think is 499.0 or arounjd thast price i still have my 3. but i only use it for curtting oramask 813 i custom paint guitars. and for that mattert why not get the juloiet from sciser its suposed to bead a## from what i hread.
I have the Juliet and it's great. However, at the time of filming this, the Cameo Pro was the first 24 inch cutter that was crafter-friendly on the market.
@@LisaPottsDesigns about the Juliet I can't get a straight answer from any one . Is itccloid based like cricit or can you use it like the cameo and not have to actually be on the internet to use it that's the main reason o bought a sholouette use it stand alone no fees or anything these coep comp are screwing the consumer erevery days and I don't like it . I liked it better I'mtje 89s0s
All day in an utter torture with the machine and have a feeling it’s the blade as well. If I knew it would be so problematic, would Never spend $500 on it.
@@LisaPottsDesigns It's not all about the clearance. They should improve the rolls pressure: the mat keeps on slipping and often the cardboard gets stuck under the carriage, every time the sensor tries to read the registration marks. I've heard so many testimonies about this issue...
It finally works, very annoying if something brand new is broken.
Well presented, Lisa.
Didn't even know such a big cutter existed.
Thank you! I have to say, most releases have a few bugs to work out, but this one was very disappointing.
not sahilouette but there are othger comp that producealot bigger up 36 inches i bealve theyt just cant cut as intracit as the desktop ones
So glad you are able to use yours. I guess i was one of the lucky ones that my machine works as expected
You lucky duck! I'm still using a cutting mat for everything.
My wife, Julia, mockabee remembers. You were at Liberty in the RA group with her at the same time in the year, 2012-2013. Thanks for the video
Great video, you make the boring stuff not so bad! Can't wait to check out more videos!
Thank you for this video - I thought I was the only person having problems with the Cameo 4 Pro. I'm having no end of trouble with mine (sketch lines are fine but cuts are all mis-aligned. It seems like the mat slips when I try to cut on the 24in mat but smaller mats seem to work okay), and am in contact with the Silhouette Support team.
I received my machine in March, but have yet to make a successful cut on the 24in mat, which is frustrating because I upgraded to the Pro to be able to make wide cuts. Your video has given me hope that issues can be resolved!
Crossing my fingers! Just keep up with support so you can get a resolution.
@@LisaPottsDesigns thank you, I will: the worst part is that I sold my Cameo 4 to fund the purchase of the Pro, so I can't cut anything at the moment!
@@kittyishere what was outcome?
@@brettpassmore6070 it transpires that the mat that came with the pro was too flexible and thus was sagging when I attempted cuts. Our retailer provided us a new mat and we've been fine since!
I could never get registration to work consistently. I added two LED lights shining down into where the blade is. Wala! I also stopped using Silhouette mats and started using thicker mats. That's helped get it to go in evenly.
Yes! They're super sensitive to light! Sometimes I color my squares in with a permanent marker.
Great to find your channel. I’ve missed seeing you. I just subscribed and I’m looking forward to watching all your videos.
Awesome! Thank you!
Just bought my cameo 4 pro looking forward to your videos!
Have fun!
I have also been using an older (dark blue) Graphtec Craft Robo Pro 2 for several years, but the drivers don't always work well with Windows, especially Win10, so I usually use my Cameo (1) most of the time for decals. I've been hoping to get the Cameo 4 Pro for quite some time but it just never quite fit into my budget, until recently. I noticed the recent flash sale and I jumped on it.
Pretty bad that it took Silhouette three months to resolve your situation, when it was something simple....the blade. That should have been the first "fix" they should have recommended.
I love your "famous last words"....my family says that too! 😁
Yes it was a chaotic time. To be honest, I still have issues with the machine - mainly cutting long designs. I will be phasing over to the Cricut Romeo soon, it has much better accuracy in my opinion.
So it has been 2 years since you made this video. Do you still use this machine? If so, Have you made a follow-up video to the pros and cons?
I haven't, but it's on my list!
@@LisaPottsDesigns can you give us an overall positive/negative/complicated? Comment in the mean time please ? 😁
Thank you for the video. We just got our pro in there mail. Setting it up today🤞
I hope you love it like I do!
My Cameo Pro didn't cut properly and had serious issues with registration. Returned mine and got the cameo 4 and had ZERO issues. Theses pro models are known for faults and told by seller that multiple units have been defective and returned.
Yes, it definitely was a difficult rollout. Thankfully I am using it now without issues but I know many others have not been as fortunate.
Nice job on your video. I like how you transitioned from camera angles. The explanation of what you were doing was clear.
Glad you liked it!
OK, so I have had this for 2 plus years and never really worked with it. I just bought the Cricut Venture. IDK what I should do with the Cameo Pro ( Should I keep it?). The software was a tough learning curve so while I love the design store I couldn’t do it
Shame on silhouette for not have a good customer support stuff like that should have been determined and knocked out within one or two business days
This was a tough issue to solve remotely. It's typical when there's a big release, they need to get a lot of information. No biggie to me anymore.
Just got my Cameo Pro, never used Silhuette before, so I'm looking forward to using it.
It's got a bit of a learning curve, but it's amazing once you get the hang of it!
I got mine like 2 weeks ago I’m excited to see what you do with your machine
Hope you enjoy it!
Cost and it only being a hobby to me was the deciding factor for not going to the pro but did move from the portrait to the cameo 4... sorry if this sounds bad...but I was glad to see that you had a problem from unboxing...mine unfortunately was from being a typical guy...don't need instructions... machine needed firmware update and the usb connection wasn't being recognised...of course I contacted my seller who put me in touch with silhouettes sister company here in the UK and they had my machine for 3 months..but got it back and it was working...until it needed another firmware update...when I first set it up Bluetooth automatically came on and set up went ahead...so usb set up never got done...so I had to uninstall everything... reinstall making sure Bluetooth was turned off... actually turned it off on my laptop as well...did the usb set-up then switched Bluetooth on then did the Bluetooth set-up...like yourself now have the machine showing twice...usb and Bluetooth...took over a year during lockdown to finally get it sorted...
So now you know why I said it was good to see you also having a problem...can I also say your unboxing and set up was the best in showing how to step by step... though sorry you didn't also do the getting the free designs etc as there is bound to be those setting up for the first time...or have moved from a different machine..
That said keep up the good work..
Thanks, Paul! I was just trying to keep it real. When I see no one else struggling, I start to feel crazy. At least we know we're not alone!
What do you do when your mat slips? I am new to Silhouette and I am really struggling.
Try checking the roller on the right side. It might be misaligned!
You handled the situation better than I could have!! They would have replaced immediately 🤨 Many blessings
Ha! I have had Sihouette's for years, so I held out hope it was just a bug!
Love all your videos! Do you regret purchasing the Silhouette 4 Pro? I got mine for Christmas and haven’t opened yet. I’m so scared because of all the problems people are having.
I almost did, until I had a design that was 14 inches by 12 and I could easily cut it on my Pro!
I bought my daughter one for Christmas it has cut twice since she's had it. 🤦🏾♀️
Omg I am so excited for you! I received my Pro just before Christmas. I am new to vinyl cutting machines. What I am struggling with is loading my materials going in straight. 😫 Luckily my machine cuts just fine.
I’ve noticed my machine has been having issues too. It’s not as forgiving as previous models.
This is the same issue I am having and it really is a horrible design!! They should have just made the machine bigger and not make all those changes because it sucks!!!
Hi I’m watching your video, thinking to get a cameo pro , for me main reason I want to get this machine is for size, I have a question does vinyl rolls come is 24 just like the machine?
Yes! I get both my decal vinyl and htv in 24 inches very often.
I've been eye balling the pro just because of the size. I wouldn't use the huge width but very rarely. I see alot of people have issues with it. Would it be better to buy a plus vs the pro? Just to save on issues. Thanks!
I would either go basic or pro, not the plus. I still use my pro simply for the fact that I can keep my 20-inch pieces of glitter htv in sheets longer than a foot. You can't do that with the plus, since it's 15 inches. If you're rarely using the width to its potential, save the money and get the basic.
Omg thank you so much needed to see this
Glad it was helpful!
I am trying to cut without a mat on 24" wide vinyl. I keep getting a message that the selected media is too wide to be used with the specified Silhouette. I have the Cameo Pro. I have no idea what's wrong.
A couple things:
1. Make sure your Cameo Pro is connected and selected. You may need to click the button at the bottom of the send panel and select the Pro.
2. You may need to update your mat or media size. Make sure you have the 24 inch mat selected.
Let me know if either one of these help!
Hello,
I cant get my mat to feed correcrtly. mat keeps slipping all over the place. It doesn't appear to be locking down on the right side. Can you help?
I can try! What does the lever on the right side look like? When you move it, is the bar clicked down? Also, is the small white slider/roller on the right sitting on the edge of the mat?
Could you comment a little on how the pro compares to more industrial 24” cutters? How do they compare? Is the Cameo Pro worth it? What other 24” machines compare to the cameo pro?
The Cameo Pro is great for crafters who want to move to a bigger machine without the intimidation of other software. However, it uses a stepper motor and its slower than other industrial machines. If you are going to be going to a higher business level, the Graphtec or Roland 24 inch machines are great ways to get in.
Tell me… three years later, has cameo made the cameo 4 pro quieter? Thank you.
Honestly, I haven't kept up with Cameos anymore. I switched over to the Siser cutters. Quiet, fast and precise. :)
@@LisaPottsDesigns thank you for your honesty and your response. I know it’s loud. My 4 is loud, but I prefer it over my CRICUT. I would get the Romeo if I could afford it. Again, thank you so much.
i have had mine for a few months. I do not use a mat. but some of my designs it will move the carriage all the way to the right of the machine and start cutting from there, even if my settings are for a 4 x8 , positioned on top left of material view. I am not a proficient user however why are some designs doing this and others are not.
That's very strange. I haven't had that happen before. I recently needed to update my firmware, is yours up to date?
Hi, Thank you for making this nice video. Have you ever cut fabric with it? And specifically stretchy fabric? I'm thinking of buying this, but I want to make sure it works for it first.
I have not personally, but I have seen many others use it! Just a matter of testing settings!
@@LisaPottsDesigns I see, thank you!
Hi Sara, have you found videos of the pro cutting the stretchy fabric? Have you bought it and tried? I want it for the same thing but I want to be sure it works
@@tiffenydecoteau4037 Hi Tiffany, sorry it took me so long, I never saw the notification for this. Actually I realized that the sticky mats ruin the elasticity of stretchy fabrics, and since these cutters need the sticky mats, they just don't work well with stretchy fabrics, the actual cutting worked well with the rotary blade though
Can you look at the defective blade and see what the problem was ? Why was it defective ? is it possible for you to see ? can you take it apart or cut it apart and look to see what the problem was ? Do you have a favorite forum you go to to ask questions ? How long will your cameo 4 pro cut and specifically how thick of material will it cut. ? Sometimes the manuals do not disclose these things. Does the word pro in cameo 4 mean that it is a 24" ?
I think it had a small crack, but to be honest, I didn't get a good look before I threw it away in frustration. haha.
The cutting time varies based on frequency and materials. For example, vinyl doesn't wear the blade down quickly, so at least several months. Things like paper really wear them down, so it could be faster.
The Pro does mean its 24 inches 😊 There are also a ton of great Facebook groups, including mine linked in the description.
I don't have a cameo, but subscribed because you are awesome. :-)
Wow, thank you! 💕
I just came across your videos. Where is the SN etc info for my the machine so I can register my new machine. I got mine yesterday. I haven’t set it up yet. Do you know of a very affordable stand that is workable with the cameo 4 pro? I’ll be watching your cameo 4 Pro videos. You’re very down to earth, I like that. I also have to learn the software silhouette business. I need to do scanning in stamped and cuts that I cut from paper craft dies (to resize them as needed). My machine was on back order for 2-1/2 months so I hope I don’t encounter blade or feed problems. Thanks for your help!
The SN should be on the back of the machine. I don't necessarily use a stand, but I like to have a desk to put it on. This lets me turn the machine if needed, and it's a bit more steady.
Always here to help! Feel free to join my Facebook group. It's linked in the description.
@@LisaPottsDesigns thank you! I found
It…
Thank you!! 🙂
Thank you!
Hey thanks for the video, problems with mine from the get and also a faulty blade, I'm just wondering have you found that you actually cut up to the full 24" with this? I've tried cutting a simple square and it comes out of the rollers no matter where I place them 🥴
Yes! But I have to use the mat to cut the entire 24 inches. I did cut some nice decal vinyl at 22 inches wide recently, but I was nervous!
@@LisaPottsDesigns I've figured out if you feed the vinyl in a little further it does the job,thanks 🙃
Ugh I just unboxed mine and got it registered and did the setup opened my software hooked it to my laptop and the software is not recognizing my machine. What do I do?
Sometimes you need to restart. Are you still having trouble?
i just got my cameo 4 pro today...i'm completely green! where do i download software?
Silhouetteamerica.com/software !
Hello what soft ware and or what soft wares all together should I download Thanks for your video and your time 👍🏻
When I first got mine I had to adjust the blade a CRAZY amount like 16 pressure to cut regular vinyl
oooooo yeah that sounds defective!
Can you please help me. This is my second time using Comeo 4 Plus, but rigth now it doesnt show me the sent Icon on the button in the screem? Of course let me design but choose what kind od paper i am using... another the first time i used it cut perfect, but later only cut have a way i had to tose the material
I relly appreciate your help
Hi! It might be easier to see a screenshot. Can you email me at hello@lisapottsdesigns.com?
New subscriber. Excited to see more videos
Welcome!!
Just got cameo 4 plus after using the portrait
That's a big jump!
@@LisaPottsDesigns well I'm learning, and please keep putting out your fantastic videos
thank you for this
You're very welcome!
hola, tienes algún video donde uses las guías de impresión, las que escanea el ploter para ubicarse y luego pretroquelar imágenes impresas?
I just got mine last week and can't get it to cut or grip the vinyl....
I had a similar issue. Did you contact support?
IS IT HEAVY 🤔
Nope! It's very light!
@@LisaPottsDesigns Thank you for your quick response.
do Silhouette Cameo 4 machines have servo mechanical feature?
The Cameo machines still have stepper motors, unfortunately.
I have troubles with the pression of the bar that support the matetial. Is not doing press to support it
That sounds like an issue with the machine. Please contact Silhouette America for their tech team.
Im a week frustrated about cameo ..somebody help me
Did you get it figured out? If it's a major issue, please contact Silhouette support!
can i pay for a video help call
Yes, you can find my training resources here: lisapottsdesigns.com/training/
Just ordered the 4 pro
Let me know how it goes!
@@LisaPottsDesigns i got my pro and my first use was on the forever subli-flex 202 . My first cut was successful thanks to your videos on cut settings.
#REPLAY
3 years later, and I have found your channel. I’m planning to purchase the Silhouette Cameo 4 Pro on 2024 Amazon Prime Day. I already use the Silhouette Cameo 4, but it’s time for a 24 inch cutter. I also need a wide format sublimation printer. Epson preferably. I inks are much more affordable.
for the price of that cameo i could buyu 2 rolands 24inch models fgrom us cutter or prob of other brandsa. that think is 499.0 or arounjd thast price i still have my 3. but i only use it for curtting oramask 813 i custom paint guitars. and for that mattert why not get the juloiet from sciser its suposed to bead a## from what i hread.
I have the Juliet and it's great. However, at the time of filming this, the Cameo Pro was the first 24 inch cutter that was crafter-friendly on the market.
@@LisaPottsDesigns about the Juliet I can't get a straight answer from any one . Is itccloid based like cricit or can you use it like the cameo and not have to actually be on the internet to use it that's the main reason o bought a sholouette use it stand alone no fees or anything these coep comp are screwing the consumer erevery days and I don't like it . I liked it better I'mtje 89s0s
I’m having problems calibrating mine
Check where you are placing your material. Don't place it on the edge of the grid lines, but place it on the edge of the sticky part.
Cameo 4 pro and cameo 4 plus
Pan Cake Batters would have been a better name.
LOL! Maybe for the next season.
I am having issues calibrating so I can do print then cut
Where are you putting it on the mat? Stick it where the sticky part starts, not where the grid starts!
Have you made anything with the whole 24 inch set up or everything could be done with a Plus and save money
Nope. But I have done 20 inches of HTV, so it's already worth it since the Plus is 15 inches.
The one thing I dislike about the cameo is that its making too much noise.
Yeah...that's always been an issue. lol. At this point it's white noise to me.
I couldn't cut for a month because there was an extra piece of tape inside that I couldn't see
A looong time ago, the tape on the machine was clear. SO MANY people had issues all the time! I'm glad you found it!
bellissima🥰😘😘
Thank you
All day in an utter torture with the machine and have a feeling it’s the blade as well. If I knew it would be so problematic, would
Never spend $500 on it.
Hope its working better now! Mine has become pretty reliable now.
This is what mine keeps saying
Definitely contact Silhouette if you're still having issues. They're still working through bugs.
@@LisaPottsDesigns I figured it out I think it was my blade not in right or I did shut it off and swiped it back and forth
LOL If you are human watching youtube leave a like, if you are not human watching youtube leave a like.
👍👍👍👍👍👍👍👍👍👍👍👍👍
Thanks!
You will never be able to do a print and cut job with thick cardboard , as you can do with Cameo 3 and 4
It's the same cutting clearance. You can certainly do it.
@@LisaPottsDesigns It's not all about the clearance. They should improve the rolls pressure: the mat keeps on slipping and often the cardboard gets stuck under the carriage, every time the sensor tries to read the registration marks. I've heard so many testimonies about this issue...