tonto74100 yeah... i'm glad to hear that. Did you mean you want to change the fuel hose in this video th-cam.com/video/rPqgV0F2MFg/w-d-xo.html. I hope i'm right
Tony Sherlock the step: 1) remove the injector fuel hose. there is 2 hose (supply & return). how to remove it, you can see in my other video (injector removal). just remove that fuel hose and injector cable. 2) remove 3 hose on crankcase vent valve. 3) remove 2 bolt between adjuster unit. 4) remove camshaft and crankshaft sensor cable on the box sensor. 5) remove box sensor nut. 6) remove lower intake nut that attach into cylinder head. i hope this step can help
In E36M43, electric fan sensor is double temperature switch. The location of the switch is on the right side of radiator. Crack shaft sensor is underneath the flywheel. Or in my other video th-cam.com/video/TeK1NF7H-dw/w-d-xo.html in minute 1:00 i disconnect cam and crank shaft connector. The longest cable is crank shaft sensor cable, follow it
@@brianjames6082 honestly, i have never checked an engine other than e36m43. Crank case vent in e36m43, you can see in my link video that i have given before in minute 6:55. I removed the hose from CCV
Hey guys need help plz What’s the part number of the rubber hose under the intake that connects from the fuel rail to the intake black plastic boot can see in 10:26
Im trying to get to the coolant hose connector to replace it got to the final stage in your video not sure how to remove the manifold if you have a video detail this it would be greatly appreciated
Hello, I am writing to you from Turkey. my vehicle is e36 m43b16. the hose coming out of the flow meter bellows remains empty. I don't know where he went. can you help me?
@@motoren_works Hello. My car's engine is same as written. the hose between air flow meter and fuel sender is cracked. is thah hose affects fuel economy? my car is consuming like monster. (10Lt/100 km at highway)
Take the back screw and the front screw and loosen them while the manifold will come right off once you take out the 3 screws on the manifold that hold it in place.
I've done it. The problem is i'm forget where i save the raw video file :(. I will try to find the file first. After find it, inshaAllah i will publish it.
motoren works thanks I’d really appreciate it if you could but if you can’t find it thats fine. My issue mostly is getting the electrical squid out of the way .. I’m replacing the coolant cupeling and the intake is in the way.
motoren works yea, mine just gave out and poured coolant all over the place and the only way to get to is by removing the manifold completely... unfortunately there are no videos covering this job step by step for this engine, so I’m kindve doing the job blind.
Thanks for your advice completed it a couple of hours ago what a Job. Hey thanks for your help
Tony
You're welcome Tony, i'm happy if the job already done
Cheers!!....saved me $$$....i had to replace the inch piece of rubber pipe that connects the fuel lines...under the intake...thanks!
tonto74100 yeah... i'm glad to hear that. Did you mean you want to change the fuel hose in this video th-cam.com/video/rPqgV0F2MFg/w-d-xo.html. I hope i'm right
thank you so much
Hello with the upper intake manifold removed can i access the coolant conector? Thanks for these videos
yes you can to access it. but if you want to replace it, you must disconnect and move some cables to give better acces
by the way this is the best video I have seen great work
Tony Sherlock Actually i was already done to replace lower intake, unfortunately i wasn't filmming it, i'm sorry.
Tony Sherlock the step: 1) remove the injector fuel hose. there is 2 hose (supply & return). how to remove it, you can see in my other video (injector removal). just remove that fuel hose and injector cable. 2) remove 3 hose on crankcase vent valve. 3) remove 2 bolt between adjuster unit. 4) remove camshaft and crankshaft sensor cable on the box sensor. 5) remove box sensor nut. 6) remove lower intake nut that attach into cylinder head.
i hope this step can help
what’s this tube going across the motor in the very last second of your video? can i contact you somewhere to send you a screenshot?
𝙸𝚝 𝚐𝚘𝚎𝚜 𝚝𝚘 𝚏𝚞𝚎𝚕 𝚝𝚊𝚗𝚔 𝚋𝚛𝚎𝚊𝚝𝚑𝚎𝚛 𝚟𝚊𝚕𝚟𝚎 (𝚗𝚎𝚊𝚛 𝚊𝚌𝚝𝚒𝚟𝚊𝚝𝚎𝚍 𝚌𝚑𝚊𝚛𝚌𝚘𝚊𝚕 𝚝𝚊𝚗𝚔)
𝙸𝚗𝚜𝚝𝚊𝚐𝚛𝚊𝚖: @𝚖𝚘𝚝𝚘𝚛𝚎𝚗_𝚠𝚘𝚛𝚔𝚜
I have an E46 318 which looks so similar to yours. Where is the sensor for the fan and the gauge situate and where is the pick up/crank sensor
In E36M43, electric fan sensor is double temperature switch. The location of the switch is on the right side of radiator.
Crack shaft sensor is underneath the flywheel. Or in my other video th-cam.com/video/TeK1NF7H-dw/w-d-xo.html in minute 1:00 i disconnect cam and crank shaft connector. The longest cable is crank shaft sensor cable, follow it
@@motoren_works Thanks again! Does the 318 E46 have a crank case ventilator, if so where
@@brianjames6082 honestly, i have never checked an engine other than e36m43. Crank case vent in e36m43, you can see in my link video that i have given before in minute 6:55. I removed the hose from CCV
Thank alot.... Great video
Hey guys need help plz
What’s the part number of the rubber hose under the intake that connects from the fuel rail to the intake black plastic boot can see in 10:26
Please check it on website bmwfans.info
Im trying to get to the coolant hose connector to replace it got to the final stage in your video not sure how to remove the manifold if you have a video detail this it would be greatly appreciated
Hello, I am writing to you from Turkey. my vehicle is e36 m43b16. the hose coming out of the flow meter bellows remains empty. I don't know where he went. can you help me?
Hello, did you mean you're missing the hose between Air Flow Meter and upper intake manifold?
@@motoren_works If I show you through the photo? through an email?
@@dogukanaksakal7598 motorenworkz@gmail.com
@@motoren_works thank you. I will sent e mail
@@motoren_works Hello. My car's engine is same as written. the hose between air flow meter and fuel sender is cracked. is thah hose affects fuel economy? my car is consuming like monster. (10Lt/100 km at highway)
i love watching and learning on your video man, i got the same engine model hahaha nice one.
Om klo baut buangan oli ukuran kuncinya berapa yah?thx
Baut buangan oli itu maksudnya baut yg di carter?
Kalau iya, 17 th-cam.com/video/-RTH-aBQ07k/w-d-xo.html
@@motoren_works iya om..trm ksih banyak..btw klo cuma pake dongkrak tanpa jack stand aman g om?hehe
@@wirawanadhiepamungkas1540 kalau saran sy, tambahin penahan lg om. Gak tau apesnya kapan
@@motoren_works siap..trm ksih..tetep smngat bikin konten ya om..berguna bnget..hehe
@@wirawanadhiepamungkas1540 masama om
is there a second part upper intake manifold replacement
Tony Sherlock Do you mean another process to replace intake manifold lower part?
Superb excellent
Yes I got to the stage of the Video but need to know how to take the manifold off a tad stuck
Take the back screw and the front screw and loosen them while the manifold will come right off once you take out the 3 screws on the manifold that hold it in place.
Any chance of a lower intake removal ?
I've done it. The problem is i'm forget where i save the raw video file :(. I will try to find the file first. After find it, inshaAllah i will publish it.
motoren works thanks I’d really appreciate it if you could but if you can’t find it thats fine. My issue mostly is getting the electrical squid out of the way .. I’m replacing the coolant cupeling and the intake is in the way.
@@BMWe-oz9wk the coolant cupeling is mean the plastic pipe that attach in the engine block, the position is under the lower intake manifold?
motoren works yea, mine just gave out and poured coolant all over the place and the only way to get to is by removing the manifold completely... unfortunately there are no videos covering this job step by step for this engine, so I’m kindve doing the job blind.
@@BMWe-oz9wk OK, i hope i can quickly find the video file.
THX !!! :)
Alex Benedek you're welcome
რომ გუდავს მატორი რისი ბრლაია
Semua dalam kondisi baik
White gloves and no blood? C'mon this an E36 completely staged!