@@ForeverSelfEmployed thanks alot bro you're the man lol, do you have a snapchat that you use for these jobs as well that ppl could add you on ? I dont have Instagram or facebook is why I'm asking and it seems like some of these jobs I've seen you do would make cool little videos .
UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust th-cam.com/users/postUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.
Justin, to your question about the choke, you definitely want to adjust it. Usually Full choke to start it up, then choke completely OFF once it gets going and you're powerwashing. By running it half choke, you're running it rich (extra fuel) and these carbs are tuned to give you a stoichiometric mix when the choke is off. Choke off keeps carbon buildup at a minimum and burns less gas while giving more power. Great video thanks for sharing!
Forever Self Employed I also know these engines well and yes, make sure the choke is completely OFF once the engine is running. If it’s not then you will start to have problems very quickly.
Very good review. I bought this same unit in 1997 and it just laid down on me this year. I'll never own one that doesn't have a honda motor. We had a Simpson at work and that's why I went with it to begin with. It was belt driven and quite a bit more expensive. These are great units and I'm going to Lowe's for my next one. Thanks again.
I just purchased a Simpson 4400PSI/4GPM and brand new out the box it has a bad unloader. It stays in constant high pressure mode and activates pop off valve immediately. I replaced the AAA pump with a Honda AR pump 4400/4gpm and it works fantastic now. Didn’t have time to wait 2 months for the repair shop to fix it.
Jetstream Power Wash ~They were telling me it’s part of the pump. I didn’t and could t wait to find out I got another bad apple. The Honda AR pump has all individual parts. Each part is quick to change saving down time. Overall just a much better pump. I might replace the unloaded on the other one and keep for a back up plan.
Great review , I have been looking at it myself. I have been running a simpson 2.5 gpm 3300psi with honda gx200 motor....I know everyone says you need 4gm..but it was in my budget last year and it does excellent for my gets all my homes and driveways clean and made me some nice money. I get about 3.5hrs per tank......keep up the good work and awesome videos
I would recommend airplane fuel. I park my 1987 Electra-Glide every winter with airplane fuel and it starts right up, even with 100,000 miles on it. Use it on my snowblower, weed trimmer, and chainsaws, which are not used very often.
I had a Simpson for year's it always started right up the pump died and it was 10 year's old, i just got a mi-t-m at Sherwin Williams 4000 psi 3.5 gallon per minute cold water direct driven i like it because it's on an aluminum frame it's about the same size as the Simpson but it lighter my Simpson was a tank also the Simpson was 2 grand the mi-t-m cost about $900 Sherwin Williams had a Contractor sale they gave me a drill set too If anyone is thinking of pressure washing full time get a commercial grade washer they're worth it in the long run the cheap ones are unreliable but do the best you can with whatever budget you have i mostly paint but i like to have decent equipment and i always wash a house before painting
For the everyday home owner it would be a great tool to have but if you are running every day you need to spend $1700 an get a belt drive stay away from AAA pumps get a CAT or GP 4gpm or higher best on the market an what you said about the Honda engines is fact they will outlast any other if maintenance is kept up.
@@Jimmy_Cavallo he's saying that because pumps can be replaced or upgraded. One's pre-installed, like mine, will eventually fail and the only thing I can do is replace the whole machine. That is 600 dollars, whereas a pump will cost you 70 if you go to northern tool. I will eventually buy a pump and downstream. I am still saving to buy a 4.5 gpm machine.
You and my brother are the ones that helped me gain the confidence to start my business and the tips I've used from you have made me more money each job and more jobs locally. You are truly a pressure GOD🙏 . Couldn't have done it without and support or little confidence you give to other smaller businesses and handymen.
Been watching your videos and gotta say their pretty cool and informant. Many people are always going to question your methods but I believe in doing what works for you. Keep it up dude and make that money baby.
Hey Justin, I saved some money and decided after doing some research to give this a shot. I'm going with a the Simpson Megashot 3200 psi washer, 31 inch extender, surface cleaner to start off. Excited to see where this goes thanks for inspiring others to take a shot at this business, your positive attitude and encouragement has been helpful. Thank you.
Choke is *only* for start up, once the engine has started and/or is up to operating temperature it should *always* be turned all the way off. You should never run an engine (any engine) for extended periods of time with the choke on. You will cause the engine to run richer than it should which leads to excessive gas usage and carbon deposit buildup inside the cylinder/exhaust. It will also rob your horsepower!
To be fair.. for paid pressure washing work, cheapest I would go is around the $899 mark on Amazon for the Simpson 4.2GPM. All about the GPM at a certain point.
No comments pertaining to triplex pumps? Thats what your steppin up to with this unit. AAA are ceramic lined pistons. Cat have full ceramic pistons and are worth the extra cash. Plus you guys running units 5-8 hrs a day 5 days a week should go with the belt driven models with Cat triplex pumps.
I just bought the 3700 psi pressure washer from lowes too it was 699.00 and it has all the same stuff as the 4000 psi except the 300 extra pressure been using mine alot and its pretty sweet but I just use it around the house for lawn tractors,trucks house ect, been working really good so far got an extra 3 year warranty from blowes ,good luck with yours I guess we will see how long they last lol great video
The internet & TH-cam is amazing. My dude hustles 24/7 I love the grind homie. Definitely never thought of this as a side income. Im a retired vet, everyone in my neighborhood has long driveways and 2 car garages. $150-$250 a pop not bad keep hustling
I run the same machine and rarely choke it after the first start. I change the oils in the motor and pump regularly and use ethanol free gas. I change the air filter, and spark plug regularly and once a year I set the valves. Mine still runs like the day I bought it and I’ve had to do nothing to it except for the regular maintenance it requires.
I got the 3400 psi honda 200 engine. Its great. Tri pump. It will cut through wood if your not careful. 2.7 gal. I love how it works but pressure washing is fun for 3 4 hours.5hen its a job, god bless you. But it is superb. I only pais 350.00 for it. I knew the manager at TS. Last one. Grabbed it up. Never looked back. Just need the cleaning sprayer. Great unit.
Please consider using Bestline oil additive, 1-2 ounces per quart(about $1.50 per ounce) on small Honda engines.I have used it with great success for years. I believe it had extended the engine life and lowers running temperatures. I have seen many years of life out of my Honda engines with this and pure synthetic oil. Cheap insurance for an expensive engine. I use only the best oils. (Mobil 1, Pennzoil Platinum, Amzoil, which ever one is on sale and change it often (around 25 hours) Ron A
Dudeeeeee what the heck. I’m just browsing through some vids in my watch later and I knew something about you seemed relatable. All I had to see was “Hammond Lowe’s” and knew it. Fellow Louisianian! Super cool to see someone on the interwebs that’s local. Keep doing your thing in the 985 (I’m in 225).
I have Simpson 3300. Bought at Tractor Supply. Amazing the price increase in 2yrs on them. Kinda would like to upgrade to a 4000psi 4/gal. Do like the Honda Motors on them
I used to have pressure washer about that size. It would suck the hose flat. I replaced the garden valve with a large diameter ball valve and it still sucked the hose flat. If you want a big pressure washer, be carefull of the supply.
Great video as always but your 2 hours of run time could be due to the fact that you said you run the motor on full choke the whole time, I use the same Simpson pump with the Honda 270 and get almost 4.5 hours of run time out mine. Of course usage may vary due to variations in altitude, RPM settings, and water pressure settings. But awesome job though.
Do you wash homes with yours? I just ordered the one you mentioned from Lowe's. I've been using a 2.5 gpm unit,but even with 2nd story tips couldnt quite wash 2 story homes. I'm hoping this new washer will solve that problem. It's a good looking unit with alot of good reviews.
That’s a big boy toy right there bro that thing is pretty keep pushing out the videos that’s how we grow bro pushing that 🔥🔥 content one after another love seeing you grind bro makes me grind hard as hell too
If you need to build yourself up and are using a smaller machine you can still get alot of the amenities that come with larger units and transfer them to the bigger unit if you get one. Quick connect kits for converting the m22 fittings so you can use quick connect pro hoses. Quick connect kits $30 at lowes. Get yourself a 4kpsi 100ft semi pro hose from pressure tek for $120. They also sale the jrod tips for around $50,and ball valves,and downstream injectors at real affordable prices too. Combine that with a lightweight zero g garden hose and you've got a real decent setup that's transferable if and when you upgrade. With a 2.5gpm unit itll take you longer than if you had a 4gpm unit,but itll still.make plenty of money. All the accessories I mentioned will help make your work easier and faster so you can get home to play with the kids or on to the next job.
Your great review convinced me to get this Simpson, and following your Amazon link your yellow surface cleaner is a 20". Is this 3.5 GPM enough flow to keep the 20" surface cleaner running well?
It's an air cooled engine and it's good to let it idle with no load (ball valve open) to keep pump cool as well before shutting off. This cools down the engine before you shut it fown
How's the pressure washer holding up looking at pulling the trigger and purchasing one this week. I got you on using the Ethanol free gas, which is hard to come by.
I was looking at another video you said that you were using a backpack sprayer because you didnt have a downstream injector on you pressure washer. That pressure washer has one on it. Its the little barb thing sticking out near the quick connect at the min 2:28 part of the video
Hey do I just put detergent tube directly in detergent bottle. Says makes 20 gallons but in a 1 gallon jug. And do I need to do anything after runnings detergent through it?
I always wish I could have had a commercial powerwasher like yours. For your business, do you have one of those big water tanks with it and how do you charge too?
I JUST BOUGHT A SIMPSON PRESSURE WASHER. BOUGHT IT AT TRACTOR SUPPLY. BEST PRICE GOING ON A PRESSURE WASHER AT THEIR STORES. MINE WAS 232 DOLLARS FOR A 3100 PSI MAXIMUM. EXCELLENT WASHER. EASY START. ROLLS TO BE ABLE TO MOVE IT EASILY. GOOD FLEXIBLE HOSE. STARTS ON FIRST PULL EVERY TIME. DOES NOT USE TONS OF FUEL. SMOOTH RUNNER. 😊
Hello. I hope you may know the answer to this but I seem to not know where to find this information at. Here I go lol I started a side gig here in town with my own power washing business. I purchased a 225 Gallon power washer that shoots 4 GPM. I wanted to know if you knew what the ratio solution to water would be? I thought it would tell me when I bought it but guess not :( Thanks for your time!
I recently upgraded my old Honda powered Billy Goat to a new one and had a similar problem with fuel. I don’t think it was using much more but the tank was half the size, I’d love to know who thought that was a good idea, I’m forever refilling it
I’m trying to find the black vent plug that replaces the red plug and I can’t locate it. Can you help me locate where it might be? It says it “comes with the pump”.
Truly a deal. If you want to upgrade the pump after a few years of use would also be a smart long term plan. Approximate upgraded pump is 249.00 for the General brand.
If you had the choice would you have gone with the 4200psi 4.0g/m model instead? Also does the machine you have have enough power to reach high areas such as the 2nd floor exterior walls of a house? I need something that has the power to hit eaves 25-30 feet up.
Get a second story nozzle www.amazon.com/Tool-Daily-Quick-Connect-Pressure-4000PSI/dp/B073TGTZWH/ref=mp_s_a_1_1_sspa?keywords=second+story+nozzle+kit&qid=1559421075&s=gateway&sprefix=second+sto&sr=8-1-spons&psc=1
I heard you mention washing your car with this? How does this not ruin your paint? Is there a better tip to switch to to help prevent the damage or are you just standing back further?
Does how stream come out of it and what's the difference much hot or cold pressure washer pronto break? And what about oil put out in and what size is your water tank ?
How is the pump? What kind of pump does it have? I’m thinking about purchasing this Simpson to add some pressure washing and surface cleaning services to my lawn an landscaping business.
Lowes has this one and one with a simpson motor at 4gpm that's $50 cheaper. Is it worth the sacrifice in quality for that 1/2gpm more. It actually has a better rating than the Honda motor.
Great video Here’s some tips for the Honda’s Fist start of the day 1/3 throttle and full choke. Let it warm up for 30sec - 1 min and then rev her up. Idle for a few seconds before turning off.
I've got pretty much this same pressure washer, but under the DeWalt brand name I got at Home Depot sometime around 2010. It has the same engine and I believe the same pump. I HATED, and I mean that sincerely, the hose and nozzle that came with it. The hose was WAY too stiff and the nozzle was so-so. I don't know if Simpson sourced theirs better, but I would encourage anyone to buy a better hose and spray gun anyway. The Flexilla hose is a good one. I think Amazon sells them now. They also have a good spray gun that is a knock-off of Italian models. It works pretty well.
Hi Justine, great content. I live in California so I can not get this model because of the Honda engine. There is a version SIMPSON Powershot 4400 PSI 4-Gallon-GPM Cold Water Gas Pressure Washer (CARB) Model #PS61232. Would you recommend this one or another one? I see a lot of bad reviews on most pressure washers both Honda and others so it makes it scary to invest in one. Please advise Thank you
Can I use this with a down stream injector and tank?? I’m tryna start my own business. Also chemicals what kinds of chemicals I know it’s SH but where can I get that and what not.
🛑 PRESSURE WASHING BUSINESS COURSE: bit.ly/LOCALDOMINATIONJUSTIN
✅ Free Pressure Washing Business WebClass: bit.ly/ICWebby
💵 Wood Cleaning Course: bit.ly/WoodCleaning
▶️ MY FACEBOOK AD STRATEGY COURSE: bit.ly/FBADSJUSTIN
👉🏻 TRY THIS CRM FREE: IHttps://jobber.grsm.io/justinrogers8730
💰 FREE INSURANCE QUOTE: www.nextinsurance.com/justin
☎️ 1 ON 1 COACHING: clarity.fm/foreverselfemployed
MY PRESSURE WASHING SET-UP
BALL VALVE: amzn.to/2FZ9aeO
X JET: amzn.to/33QYQh7
Current Pressure Washer: amzn.to/2W2GQzo
Current Surface Cleaner: amzn.to/2XsIr1z
Beginner Pressure Washer: amzn.to/2HVviXf
Pressure Washer Hose: amzn.to/2CsQcbU
Garden Hose: amzn.to/2CqIGhS
Wand Tips: amzn.to/2OhfLBf
Surface Cleaner: amzn.to/2ui0kzP
CURRENT SURFACE CLEANER: amzn.to/2XsIr1z
Pressure Washing Playlist: th-cam.com/video/ju3s1WbmCmE/w-d-xo.html
LIKE//SUBSCRIBE//THANKS FOR WATCHING
LIKE//SUBSCRIBE//THANKS FOR WATCHING
JUSTIN’S SOCIAL:
Instagram: instagram.com/jrogerskillinem/?hl=en
Soundcloud: soundcloud.com/jrogers_killin_em
Business Inquiries/ Features: jrogerstv1234@gmail.com
The link for the surface cleaner is directing me to some cheap 80 dollar one and not the one I see you use, please help , looking to order today .
The link is in the description of this video
th-cam.com/video/sT6BiCrVFUQ/w-d-xo.html
@@ForeverSelfEmployed thanks alot bro you're the man lol, do you have a snapchat that you use for these jobs as well that ppl could add you on ? I dont have Instagram or facebook is why I'm asking and it seems like some of these jobs I've seen you do would make cool little videos .
Use motor bike ramps for ur pressure washer 🇬🇧🇬🇧🇬🇧😎😎😎😎
@Forever Self Employed How do you get the concrete soapy without your pressure washer having a soap dispenser?
UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust th-cam.com/users/postUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.
Justin, to your question about the choke, you definitely want to adjust it. Usually Full choke to start it up, then choke completely OFF once it gets going and you're powerwashing. By running it half choke, you're running it rich (extra fuel) and these carbs are tuned to give you a stoichiometric mix when the choke is off. Choke off keeps carbon buildup at a minimum and burns less gas while giving more power. Great video thanks for sharing!
Thank you for the great information Carlos!
Forever Self Employed I also know these engines well and yes, make sure the choke is completely OFF once the engine is running. If it’s not then you will start to have problems very quickly.
Is this available in India
@EvoMore as soon as It starts turn the choke completely off. the choke is only used during start up.
@@bobbysingh7807 research it yourself
Very good review. I bought this same unit in 1997 and it just laid down on me this year. I'll never own one that doesn't have a honda motor. We had a Simpson at work and that's why I went with it to begin with. It was belt driven and quite a bit more expensive. These are great units and I'm going to Lowe's for my next one. Thanks again.
I just purchased a Simpson 4400PSI/4GPM and brand new out the box it has a bad unloader. It stays in constant high pressure mode and activates pop off valve immediately.
I replaced the AAA pump with a Honda AR pump 4400/4gpm and it works fantastic now. Didn’t have time to wait 2 months for the repair shop to fix it.
Jetstream Power Wash ~They were telling me it’s part of the pump. I didn’t and could t wait to find out I got another bad apple.
The Honda AR pump has all individual parts. Each part is quick to change saving down time. Overall just a much better pump. I might replace the unloaded on the other one and keep for a back up plan.
One of the best well spoke reviews of anything I’ve seen on the internet.
Hey thanks a lot! I really appreciate that!
Great review , I have been looking at it myself. I have been running a simpson 2.5 gpm 3300psi with honda gx200 motor....I know everyone says you need 4gm..but it was in my budget last year and it does excellent for my gets all my homes and driveways clean and made me some nice money. I get about 3.5hrs per tank......keep up the good work and awesome videos
Same thing I run too
Just bought and am about to go try it on a job now
I bought this same at lowes for $450 on clearance. Bought the extended warranty. 2 years later I've had zero problems with it. This thing is a beast
I would definitely only use ethanol free gas for homeowners who only crank it up a few times a year.
I would recommend airplane fuel. I park my 1987 Electra-Glide every winter with airplane fuel and it starts right up, even with 100,000 miles on it. Use it on my snowblower, weed trimmer, and chainsaws, which are not used very often.
Justin my man, chasing that revenue. Love the in deep review and the fact you actually own it.
Keep up the hustle.
I had a Simpson for year's it always started right up the pump died and it was 10 year's old, i just got a mi-t-m at Sherwin Williams 4000 psi 3.5 gallon per minute cold water direct driven i like it because it's on an aluminum frame it's about the same size as the Simpson but it lighter my Simpson was a tank also the Simpson was 2 grand the mi-t-m cost about $900 Sherwin Williams had a Contractor sale they gave me a drill set too
If anyone is thinking of pressure washing full time get a commercial grade washer they're worth it in the long run the cheap ones are unreliable but do the best you can with whatever budget you have i mostly paint but i like to have decent equipment and i always wash a house before painting
Folding ramps will help in the loading and unloading of the washer.
For the everyday home owner it would be a great tool to have but if you are running every day you need to spend $1700 an get a belt drive stay away from AAA pumps get a CAT or GP 4gpm or higher best on the market an what you said about the Honda engines is fact they will outlast any other if maintenance is kept up.
I agree, cat and general pumps are the way to go. I’m still running direct drive for this year but I’ve got Honda gx270 and cat pump.
Are you saying that because this one won’t last.?
@@Jimmy_Cavallo he's saying that because pumps can be replaced or upgraded. One's pre-installed, like mine, will eventually fail and the only thing I can do is replace the whole machine. That is 600 dollars, whereas a pump will cost you 70 if you go to northern tool. I will eventually buy a pump and downstream. I am still saving to buy a 4.5 gpm machine.
You and my brother are the ones that helped me gain the confidence to start my business and the tips I've used from you have made me more money each job and more jobs locally. You are truly a pressure GOD🙏 . Couldn't have done it without and support or little confidence you give to other smaller businesses and handymen.
I love seeing you young fellows getting out there and working for yourselves. Respect!! 👴🏻👍🏻
Been watching your videos and gotta say their pretty cool and informant. Many people are always going to question your methods but I believe in doing what works for you. Keep it up dude and make that money baby.
I am curious, were you able to use the 20 inch surface cleaner at 3.5 gallons per minute?
Hey Justin, I saved some money and decided after doing some research to give this a shot. I'm going with a the Simpson Megashot 3200 psi washer, 31 inch extender, surface cleaner to start off. Excited to see where this goes thanks for inspiring others to take a shot at this business, your positive attitude and encouragement has been helpful. Thank you.
How's it going? Curious?
Should of got the 4000psi
@@stef2703shoulda, coulda, woulda 🫤
@@stef2703no need if you’re just starting… Even a weak 1700psi electric washer is good enough for starting.
Hope it's going good my boy
I just bought this pressure washer today going to start off small with friends and family and work myself up.
Why not build a wood ramp to hook on the back of your van? easier loading/unloading, just a thought. Great review.
That’s what I’m saying
Justin is straight up and tells it like is. I definitely recommend taking his advice. Please hit that like button to help him out.
1:04 1:05 1:07
Great video as always, I have my first paid pressure washing job today and I'm excited
Damn bro I’m really proud of you! Good luck!
I’m thinking about getting into the biz myself. A year later, how are you doing? Still at it? Should I take the plunge? Thanks and all the best!!
tacey01 just do it. You have 30 days to return the pressure washer if it doesn’t work out.
How much did u charge
Choke is *only* for start up, once the engine has started and/or is up to operating temperature it should *always* be turned all the way off. You should never run an engine (any engine) for extended periods of time with the choke on. You will cause the engine to run richer than it should which leads to excessive gas usage and carbon deposit buildup inside the cylinder/exhaust.
It will also rob your horsepower!
To be fair.. for paid pressure washing work, cheapest I would go is around the $899 mark on Amazon for the Simpson 4.2GPM. All about the GPM at a certain point.
No comments pertaining to triplex pumps? Thats what your steppin up to with this unit. AAA are ceramic lined pistons. Cat have full ceramic pistons and are worth the extra cash. Plus you guys running units 5-8 hrs a day 5 days a week should go with the belt driven models with Cat triplex pumps.
I just bought the 3700 psi pressure washer from lowes too it was 699.00 and it has all the same stuff as the 4000 psi except the 300 extra pressure been using mine alot and its pretty sweet but I just use it around the house for lawn tractors,trucks house ect, been working really good so far got an extra 3 year warranty from blowes ,good luck with yours I guess we will see how long they last lol great video
Hey thanks so much for the comment! I think they are good pressure washers but you are right only time will tell!
Is it worth it?
All you had to say was Honda GX -YES!
I have the 3700 psi and just purchased this one 4000 psi. 3700 is mainly for houses and my new 4000 is mainly for concrete. Cant wait to try it out
One of my favorite “residential” machines!
Get yourself a ramp to load and unload your washer or as I do leave it in your van,I'm pressure washing 20yrs and it never leaves my van
Matt ML Cleaning 20 years??? Do you do it as a living?
Kyle Williams I am wondering the same thing myself. 🤔
The internet & TH-cam is amazing. My dude hustles 24/7 I love the grind homie. Definitely never thought of this as a side income. Im a retired vet, everyone in my neighborhood has long driveways and 2 car garages. $150-$250 a pop not bad keep hustling
triple that price
Thought you sounded like you were from Louisiana, then I see available in Hammond on the Lowe’s site.
Guess I was right?
I run the same machine and rarely choke it after the first start. I change the oils in the motor and pump regularly and use ethanol free gas. I change the air filter, and spark plug regularly and once a year I set the valves. Mine still runs like the day I bought it and I’ve had to do nothing to it except for the regular maintenance it requires.
Have belt drive with Honda engine and cat pump, mainly home use some commercial 30 years still kickin, only changed engine oil.
Honda engine and Mi-T-M pump is the best way to go.
That's an unloader valve. Don't use that to adjust pressure. To adjust the pressure go with a higher flow rate nozzle.
why wouldn't you use that?
I've heard that, even though that's what the adjuster/unloader is for, I've heard it can put out more strain on your engine.
No it's not. Even the Simpson factory videos explain that it's designed to alter the pressure
Have you done a maintenance vid on your machine ? Upload plz
You are a great guy keep on helping people
What about using it for side work on the weekends, say 2-6 hours a weekend?
Question: Can I start it without the hose connected?
I got the 3400 psi honda 200 engine. Its great. Tri pump. It will cut through wood if your not careful. 2.7 gal. I love how it works but pressure washing is fun for 3 4 hours.5hen its a job, god bless you. But it is superb.
I only pais 350.00 for it. I knew the manager at TS. Last one. Grabbed it up. Never looked back. Just need the cleaning sprayer. Great unit.
Please consider using Bestline oil additive, 1-2 ounces per quart(about $1.50 per ounce) on small Honda engines.I have used it with great success for years. I believe it had extended the engine life and lowers running temperatures. I have seen many years of life out of my Honda engines with this and pure synthetic oil. Cheap insurance for an expensive engine. I use only the best oils. (Mobil 1, Pennzoil Platinum, Amzoil, which ever one is on sale and change it often (around 25 hours) Ron A
Ty
Do u put the oil that the pressure washer comes with in the pump oil spot
Dudeeeeee what the heck. I’m just browsing through some vids in my watch later and I knew something about you seemed relatable. All I had to see was “Hammond Lowe’s” and knew it. Fellow Louisianian! Super cool to see someone on the interwebs that’s local. Keep doing your thing in the 985 (I’m in 225).
I have Simpson 3300. Bought at Tractor Supply. Amazing the price increase in 2yrs on them. Kinda would like to upgrade to a 4000psi 4/gal. Do like the Honda Motors on them
Thanks for sharing your list of products you use... it's much easier making a purchase from a trusted review!
Do you need to start with vhemicals or no?
I used to have pressure washer about that size. It would suck the hose flat. I replaced the garden valve with a large diameter ball valve and it still sucked the hose flat. If you want a big pressure washer, be carefull of the supply.
Great video as always but your 2 hours of run time could be due to the fact that you said you run the motor on full choke the whole time, I use the same Simpson pump with the Honda 270 and get almost 4.5 hours of run time out mine. Of course usage may vary due to variations in altitude, RPM settings, and water pressure settings. But awesome job though.
Do you wash homes with yours? I just ordered the one you mentioned from Lowe's. I've been using a 2.5 gpm unit,but even with 2nd story tips couldnt quite wash 2 story homes. I'm hoping this new washer will solve that problem. It's a good looking unit with alot of good reviews.
That’s a big boy toy right there bro that thing is pretty keep pushing out the videos that’s how we grow bro pushing that 🔥🔥 content one after another love seeing you grind bro makes me grind hard as hell too
If you need to build yourself up and are using a smaller machine you can still get alot of the amenities that come with larger units and transfer them to the bigger unit if you get one. Quick connect kits for converting the m22 fittings so you can use quick connect pro hoses. Quick connect kits $30 at lowes. Get yourself a 4kpsi 100ft semi pro hose from pressure tek for $120. They also sale the jrod tips for around $50,and ball valves,and downstream injectors at real affordable prices too. Combine that with a lightweight zero g garden hose and you've got a real decent setup that's transferable if and when you upgrade. With a 2.5gpm unit itll take you longer than if you had a 4gpm unit,but itll still.make plenty of money. All the accessories I mentioned will help make your work easier and faster so you can get home to play with the kids or on to the next job.
Where does the water connects to do you have a tank in your vehicle do you have a connector a water hose
Your great review convinced me to get this Simpson, and following your Amazon link your yellow surface cleaner is a 20". Is this 3.5 GPM enough flow to keep the 20" surface cleaner running well?
Also you need a turbo tip. The tornado
When you shut your machine off... it's always better to let it sit and idle for about 30 seconds before shutting off.
Why
@@sothickitssickk it's never good to go from wide open to stop.
It's an air cooled engine and it's good to let it idle with no load (ball valve open) to keep pump cool as well before shutting off. This cools down the engine before you shut it fown
What type of fuel do you use in this? I’m confused because manual says LPG Fuel only (liquified petroleum gas)
i was wonderong what would happen if you would take the throttle down a bit? maybee it would take less gaz?
What your best electric pressure washer reccomendation? Ryobi?
Did you add the wheels to surface cleaner? On the link you put it has no wheels??
How's the pressure washer holding up looking at pulling the trigger and purchasing one this week. I got you on using the Ethanol free gas, which is hard to come by.
I was looking at another video you said that you were using a backpack sprayer because you didnt have a downstream injector on you pressure washer. That pressure washer has one on it. Its the little barb thing sticking out near the quick connect at the min 2:28 part of the video
Hey do I just put detergent tube directly in detergent bottle. Says makes 20 gallons but in a 1 gallon jug. And do I need to do anything after runnings detergent through it?
Looking at this model for home use and wanted more gpm. Question if I want to install a pressure guage and a downstream injector how is that done?
Your videos are great. I am looking to start a pressure washing business, tired of the desk job. Will be checking out your courses.
I always wish I could have had a commercial powerwasher like yours. For your business, do you have one of those big water tanks with it and how do you charge too?
Hey, do you think I could put this unit in a full sized sedan?
I JUST BOUGHT A SIMPSON PRESSURE WASHER. BOUGHT IT AT TRACTOR SUPPLY. BEST PRICE GOING ON A PRESSURE WASHER AT THEIR STORES. MINE WAS 232 DOLLARS FOR A 3100 PSI MAXIMUM. EXCELLENT WASHER. EASY START. ROLLS TO BE ABLE TO MOVE IT EASILY. GOOD FLEXIBLE HOSE. STARTS ON FIRST PULL EVERY TIME. DOES NOT USE TONS OF FUEL. SMOOTH RUNNER. 😊
If you drain the gas completely out of the carb, you can store it indefinitely.
indefinitely ... where the water pump won't freeze.
Hello. I hope you may know the answer to this but I seem to not know where to find this information at. Here I go lol I started a side gig here in town with my own power washing business. I purchased a 225 Gallon power washer that shoots 4 GPM. I wanted to know if you knew what the ratio solution to water would be? I thought it would tell me when I bought it but guess not :( Thanks for your time!
Does this unit come with the downstream injector hose/filter?
Is this pressure washer safe for car paint?
I recently upgraded my old Honda powered Billy Goat to a new one and had a similar problem with fuel. I don’t think it was using much more but the tank was half the size, I’d love to know who thought that was a good idea, I’m forever refilling it
how do you not get streaking and lines when you use surface cleaner? I always get lines
Thanks for this video! I purchased the exact same model from Lowes last night!
I’m trying to find the black vent plug that replaces the red plug and I can’t locate it. Can you help me locate where it might be? It says it “comes with the pump”.
Truly a deal. If you want to upgrade the pump after a few years of use would also be a smart long term plan.
Approximate upgraded pump is 249.00 for the General brand.
Heavier unit, buy or make a ramp. Good video. I'm expecting delivery of a Simpson unit, 3400, 2.8. I hope it does the job.
Hows your 3400, 2.8 treating you any issues
If you had the choice would you have gone with the 4200psi 4.0g/m model instead? Also does the machine you have have enough power to reach high areas such as the 2nd floor exterior walls of a house? I need something that has the power to hit eaves 25-30 feet up.
Get a second story nozzle www.amazon.com/Tool-Daily-Quick-Connect-Pressure-4000PSI/dp/B073TGTZWH/ref=mp_s_a_1_1_sspa?keywords=second+story+nozzle+kit&qid=1559421075&s=gateway&sprefix=second+sto&sr=8-1-spons&psc=1
I just picked this up a few days ago on clearance at lowes. 825 bucks half price regular 1650
I heard you mention washing your car with this? How does this not ruin your paint? Is there a better tip to switch to to help prevent the damage or are you just standing back further?
Also you should do a tour of your van
Great video, what do you charge per sf. to clean driveways/patios?
Does how stream come out of it and what's the difference much hot or cold pressure washer pronto break? And what about oil put out in and what size is your water tank ?
How can I build a bin cleaning pressure washer biz But I’m disabled. Total nerve damage on all left side of body!?
How is the pump? What kind of pump does it have? I’m thinking about purchasing this Simpson to add some pressure washing and surface cleaning services to my lawn an landscaping business.
Lowes has this one and one with a simpson motor at 4gpm that's $50 cheaper. Is it worth the sacrifice in quality for that 1/2gpm more. It actually has a better rating than the Honda motor.
With a 4gpm can I use the home owners Water... or is it too much
Great video
Here’s some tips for the Honda’s
Fist start of the day 1/3 throttle and full choke.
Let it warm up for 30sec - 1 min and then rev her up.
Idle for a few seconds before turning off.
That calls for a hard rubber ramp it we'll save your back keep up the good work bro😝
If you get a hot water/ steam pressure washer, can you use cold water to by a switch or something?
Does this pressure washer have a built in downstream injector for chemicals?
Hey man, do you think an 18” rigid surface cleaner would work well on this unit? Thanks for your videos
I was looking into buying one too
Me three!
what about the Stihl RB 800?
I’m going with the ryobi 3000psi model as a starter. Cheaper, lighter and the top handle could easily be taken off for a small car to transport.
Lol
Crap
Be humble my guys, ya will probably won’t go far with that mentality.
I've got pretty much this same pressure washer, but under the DeWalt brand name I got at Home Depot sometime around 2010. It has the same engine and I believe the same pump. I HATED, and I mean that sincerely, the hose and nozzle that came with it. The hose was WAY too stiff and the nozzle was so-so. I don't know if Simpson sourced theirs better, but I would encourage anyone to buy a better hose and spray gun anyway. The Flexilla hose is a good one. I think Amazon sells them now. They also have a good spray gun that is a knock-off of Italian models. It works pretty well.
what size surface cleaner can you use with this press washer? 14-16 inch? do you have to dial back the psi when doing driveways?
Does this unit have low oil shutdown like the other Honda GX270 engines that are not on Lowe's exclusive units?
Hi Justine, great content. I live in California so I can not get this model because of the Honda engine. There is a version SIMPSON
Powershot 4400 PSI 4-Gallon-GPM Cold Water Gas Pressure Washer (CARB)
Model #PS61232. Would you recommend this one or another one? I see a lot of bad reviews on most pressure washers both Honda and others so it makes it scary to invest in one. Please advise Thank you
Can I use this with a down stream injector and tank?? I’m tryna start my own business. Also chemicals what kinds of chemicals I know it’s SH but where can I get that and what not.
i got a BE gas pressure washer 210 cc Chinese CLONE ENGINE
3000 psi works amazing !!!
only $300 CAD