So legit just following your video and my sub is set up and bumping. I have a 2017 gti sport. I used the scosche adapter and your wiring guid helped sooooo much. Took me much longer then your video but I did it haha. Thanks again!!!
Hi everyone. One question, but if you add another connected amplifier besides the sub amplifier, would it disturb the sound? It happens to me that I hear the engine noise. Or when I start the engine, it slams the loudspeaker with that aux stealing system. Please help me
Hello, bad or poorly insulated RCA wires, poor or bad ground to amp or adapter, and also cheap speaker wires, are usually the main cause of engine noise coming thru speakers, I would check to make sure you have good connection to ground first then if you still have engine noise try replacing your RCA wires, then your speaker wires, if that doesn't work try a ground loop insulator.
Thanks for this video! I did everything but got stuck on the battery terminal of all things. Ended up stripping the terminal thinking I could take the nut off. How did you attach the power cable to the battery? Did you use a U shaped prong looking end?
your welcome, yeah those nuts don't come off, I used a ring connector, i just cut a notch of the ring so that i could split it just enough to go around the terminal bolt.
Hey man, really nice video, but i have a question, and i hope you can help me about that. I have mk7 TDI from 2016, but i don't have the radio in the Glovebox, i was thinking if its possible to do the same and install my subwoofer or if its need other equipments for instal the sub..
I'm trying to install 750W RMS with a pioneer amp to stock stereo. Would this method still work? Would I connect the RCA adapter to rear speaker stock wiring? Bare in mind car is hybrid.
Awesome video! Helps a lot with my install! I am using a LOC I got from bestbuy and I have the fender audio so I tapped my left (+/-) and right (+/-) to my wires in the trunk. My LOC has two ground wires, do you know if it’s necessary to ground these out? Thanks :)
Alright is there an easier way to wire a subwoofer to the radio without cutting wires? Any help would be appreciated, was thinking like an adaptor or harness
Does wiring to the back of the CD player allow bass for all other audio (Bluetooth, radio,etc) this might be a dumb question, just want to be sure that it doesn't limit bass to just the CD audio.
I wired up everything exactly as it is in the video. However even with the remote line wired up correctly the amp still draws power with the car off. Any thoughts? Great video btw
A fused switch of I think 20amp max would be needed but dont quote me on that but having a fuse will be safer and more well worth your time in the end since it's only power to turn on the amp and nothing to do with main power wire but also buying a smaller battery to hook up before or a battery capacitor if you dont allready have one so you save your battery as much as possible. Getting a smaller battery is better but about 300 to 400 hundred bucks and a battery capacitor is about 50 or 100 and reduces amps going stright to the battery and surging the main battery.
I don't want to use a converter, my amp has a hi-level input, so I'm just gonna connect audio wires at the same places you did, but where can I get the remote signal, is it possible to connect to one of the wires just like you did with the battery one? I got some advice to take the rem signal from the fuse box, but I really don't like that idea. Thanks in advance)
Say Hello To The Robots you could use the same battery wire I used to wire the converter but just make sure that it's only powered when the key is on and not all the time, it's been a while since I did this so I don't remember if it had power all the time or only when the key was on on, you can also wire it to the fuse box using an add a circuit fuse adapter , just find a fuse that only has power when key is on
Hey man, used the exact same loc2sl as you did but have run into a problem. did you have an issue getting the radio to fit back in after you installed it?
Hello my friend. I hope you still read and answer questions. First of all, thanx for the video. I’m working on mu instalation, but my rca adapter does not have the remote cable. Any idea which (radio) wire I can use for remote?? ( I know I can use sigarette lighter cable or directly from fusebox, but radio would be a lot easier.)
Hey, just saw your comment, anyways, you could just hook it up to the power wire going to the radio (red wire going to pin 18, there is a link in the description with the wiring diagram)I would just check to make sure it gets power when you turn the key on and that it's not powered all the time (it's been a while since I did this so I don't remember if it's powered all the time or when key is turned on).
Great video man, helped me get all of my stuff into my TSi. Only problem I'm having is getting the radio back into its slot, I used the same adaptor as you did, but it just doesn't want to go back in. Any tips?
Sam thanks, i had the same problem it took me a while to get it to fit, i just pushed the adapter into the hole behind the stereo and wigled it until it went in.
thebeastmedina thanks for the fast reply man! I got it a few minutes ago, had to lay upside down in the seat, but I found a hole above the stereo that I was able to fish it into. Just putting trim pieces back on now, everything is all hidden and clean. Thanks again!
Figured it out. You have to push the metal tabs on the left and right side to release the keys. I had to use a flat head screwdriver and really push to the point where I thought I might break something. Maybe my keys are too wide, but that’s how you do it. Thanks, good video!
Thanks for the video man got a question. How did you make the adapter and the cable converters fit back in with the unit? Did you have to position the adapter a certain way or tuck it in a certain place? I got the set up going and It sounds great just got my head unit hanging out bc i can’t get her back in lmao
It took me a while to get it to fit too, I just tried different spots until I found a good place where it would fit, I don't remember exactly how I got it in, it's been a while,
hey man, quick question. I see you are installing a subwoofer in gti s or sport , very nice set up bro however if I want to install a second sub to my se model, how would that work? thanks
you can use the same adapter but instead of using the signal from the rear speakers like i did you can use the signal from the wires going to the sub woofer at the trunk of the car, that sub has a plug with 4 wires (brown(L-), brown -yellow(R-), white(L+), white-yellow(R+) here is a diagram and plug wire pic I found in a vw forum www.golfmk7.com/forums/attachment.php?attachmentid=3583&stc=1&d=1419285716 www.golfmk7.com/forums/attachment.php?attachmentid=3584&stc=1&d=1419285731 And of course you would have to run power wires for your amp, and for the power for the inverter adapter you can just tie in to the positive and negative wires going to your amp, then just hook the RCA wires from the adapter to your amp, and also the romote wire from the adapter to the romote on your amp.
hello guys, i have made my install exactly like here, but i have a problem....this scosche adapter has so small wires and i can't hide it...and my player does not fit anymore...and as the job was done..came the night and i had to start the car.... all my sensors were blinking and the screen/player was not working anymore. -so pls give me tip about this adapter.... were/how should i fix it in order to close the player in his clips -is possile that my player and sensors were not working because the player did not fit fully inside? thanks
since nobody..reply..i figure out myself -scosche adapter has small wires so either is connected to a add-on connector ISo type for which you have to buy a VW iso connection-adaptor or you need to just add longer wires which i did - my scoshe adapter is now located on the side near "on-off airbag with good access -sensor were blinking because i let my battery unconnected for longer period as i was working on the car with the cables -this fast connectors with clip you find on the market with different quality - i had to change mine with new one's better quality -ground cable--make sure that the paint is clean away - contact must be on pure metal - i did it on the screw under the right back seat - with no additional wholes so, the system is working fine now and we reached to the next level SOUNDPROOFING , all my metal body parts from back side and trunck( golf 7 variant) are vibrating ---
they splice them, but do it in a clean way.. so damage is a questionable term lol. if you dont want them to be cut, then i wouldnt do this edit: this is the cleanest way that i know of to install a sub. im in the process of doing the exact process of this guy!
It. It’s the original wire and is a pretty lazy ass way to do this. Those wires are now open to the elements. Every system install should at minimum be cut and splice with weatherproof connectors or the proper way of cut and solder all connections.
Guys you need a battery capacitor if your running anything bigger then this is you want to save you cars battery. But I'm going to splice my wires and actually solder them together and shrink wrap atleast to the CD harness wires but also wondering how if I play bluetooth and not a CD since I spliced them only on that harness going to the CD player....mhmmm questions...possibilities.
I was lookign at getting the same sub. how does it sound. I used to have an infiniti G35 with bose audio. Its a dumb queston but does it hit harder than that.
Dexter Williams it sounds pretty good considering I'm using a crappy amplifier, for the size of this sub/box it's pretty loud, it's not earthquake shaking loud but it puts out enough bass to over power the mids and highs the stock stereo puts out ( not sure how it would sound if it was in a trunk of a sedan.), if that makes any sense. Also no idea how it compares to the sound on a g35.
hello few days ago i bought 4 channel amplifier ALPINE 445U (i have 2017 passat R line) i tried to connect to my factory radio and divide it to four factory speakers but couldnt because my radio doesnt have ACC wire and REMOTE wire if anyone knows what to do please tell me on how to fix it thank you
José Guilherme Baiao Oliveira, no i did not have to cut any wires, i used those splice connectors wich dont cut the wire they just cut trough some off the wire plastic, so when you take them of the wire will still be in one piece, might not look as pretty tho.
Thanks for the quick answer. I'm from Brazil and I have a friend coming back from the USA. Would you mind sending me a link of this connector from ebay, amazon? If you do so, i will be able to ask this friend to bring me the product. The guy who have installed my amp and sub on my old car have now a lot of concerns about installing the same equipment at the mk7. I will show him your video and it might help a lot.
The steel is so hard that my self tappers won’t work on the trunk floor right behind the seat. It’s really pissing me off. I don’t want to have to put a nut and bolt on it.
i just left it inside the glove box, I don't use it much, i adjusted the volume of the bass as loud as it would go before cliping, when ever i need to lower or raise the bass I use the EQ on the stereo to udjust it
hi, i just did the same install as you. wired at point 1 and 8 at the iso contact for signal. but now the screen in the car is black, not functioning, do you know why and how to fix it? everything else is fine, but the screen is pitch black without responding. i tried hard reset.
@@thebeastmedina Thanks I've got everything hooked up & the only problem I'm having is getting the loc to fit behind the CD player, how did you get it in because I've been trying everything to make it fit!
Where’s your fuse? Not using a fuse is really stupid considering you might end up putting a couple of hundred of ampère on your vehicle (which will kill you if you get in contact or burn your car down).
![KRK - ชนิสรา Ft.WanMai , N/A [Official MV] Prod. By Sakarin](http://i.ytimg.com/vi/C-WMwwYobcU/mqdefault.jpg)
![[LIVE] : ONE ลุมพินี 91 | คู่เอก "คมอาวุธ vs อเล็กเซย์"](http://i.ytimg.com/vi/V0RkEfYFsgM/mqdefault.jpg)
I'm glad you left your friend's comment "Be gentle"'at 10:50 lamo! Great video!
Best install tutorial video I've seen! Thanks! 😀 Made everything super easy! Especially the torpedo wall hole! 😀
So legit just following your video and my sub is set up and bumping. I have a 2017 gti sport. I used the scosche adapter and your wiring guid helped sooooo much. Took me much longer then your video but I did it haha. Thanks again!!!
I have a 2017 GTI sport and your comment just convinced me to do it now lol
Just got mine lol, had 2 12s in my last gti gotta do this now
@@imknells4682me too haha
Thanks for this video. I was having a hard time finding the wiring on this car to do my install. Now I just need some time and a sunny day.
Best part about this video was when he blasted out Moderat at the end. Awesome dude
0:00 When working on a car you should ALWAYS disconnect the negative terminal first to disable all power and avoid a possible short circuit.
Pablo Montero...Yes, you're absolutely correct, I stopped watching after that misinformation.
@@harryberry474 lmao cunt, it's a great video
where do you connect your remote cable to? :) thanks!
Volkswagen has a special add-on sound system kit for the Golf, it's almost plug and play!
Ronny where do you find this?
Nathan Alexander at the VW dealership, the partnumber is 000051419B
absolutly clean and simple vid thanks, i didn't know that kind of connectors excist :o, no cutting and solering or taping shit. Game changer
song- Bad Kingdom by Moderat for anyone whos wondering. Took me like 20 mins to find it lmao
Is this different the fender diagram? My wire don’t match what you have shown in the video
Mine don’t either i have a mk6 golf
Thanks for the help and creating a video without hipster non-sense :)
Hi everyone. One question, but if you add another connected amplifier besides the sub amplifier, would it disturb the sound? It happens to me that I hear the engine noise. Or when I start the engine, it slams the loudspeaker with that aux stealing system. Please help me
Hello, bad or poorly insulated RCA wires, poor or bad ground to amp or adapter, and also cheap speaker wires, are usually the main cause of engine noise coming thru speakers, I would check to make sure you have good connection to ground first then if you still have engine noise try replacing your RCA wires, then your speaker wires, if that doesn't work try a ground loop insulator.
would I be able to run a larger amp and sub by doing the same thing? looking to run a single 12in at around 1500watts
positive battery terminal first, dam
Does it have a fender sound system and is this install after the stereo or after the amp
is there like a size limit to running this set up? ( i have an 18 inch sub im trying to stuff in my gti lol )
Thanks for this video! I did everything but got stuck on the battery terminal of all things. Ended up stripping the terminal thinking I could take the nut off. How did you attach the power cable to the battery? Did you use a U shaped prong looking end?
your welcome, yeah those nuts don't come off, I used a ring connector, i just cut a notch of the ring so that i could split it just enough to go around the terminal bolt.
Thanks for the advice. I just cut the ring and everything is working now
Omg i try 2 hours ....
So I have a fender audio system with the helix sub in the back, is the wiring still the same?
AWESOME VIDEO! thanks, i needed this.
Merçi pour cette vidéo Beaucoup plus simple que la notice.
Is there a way to loosen those speaker cables in the cable block? instead of using adapters like this video?
Just saved myself $800 thanks for the good video
Hey man, really nice video, but i have a question, and i hope you can help me about that.
I have mk7 TDI from 2016, but i don't have the radio in the Glovebox, i was thinking if its possible to do the same and install my subwoofer or if its need other equipments for instal the sub..
Hopefully this works on my 2018 polo
Did it? I have a Pioneer TS WX710 A laying here and i want to install it on my 2019 Polo 😁
Did you get any fault codes because I have now and it won’t work 🤦♂️
I'm trying to install 750W RMS with a pioneer amp to stock stereo. Would this method still work? Would I connect the RCA adapter to rear speaker stock wiring? Bare in mind car is hybrid.
Where did the amp go?
Where the Remote cable goes to ? Can you help me on this ? Where did you connect ?
Excelente video, me ayudó mucho. Gracias!!!
Awesome video! Helps a lot with my install! I am using a LOC I got from bestbuy and I have the fender audio so I tapped my left (+/-) and right (+/-) to my wires in the trunk. My LOC has two ground wires, do you know if it’s necessary to ground these out? Thanks :)
Ground is not necessary
Would the wire colours/position do the same purpose on a 2019 vw polo ?
What gauge is power wires?
Alright is there an easier way to wire a subwoofer to the radio without cutting wires? Any help would be appreciated, was thinking like an adaptor or harness
Does wiring to the back of the CD player allow bass for all other audio (Bluetooth, radio,etc) this might be a dumb question, just want to be sure that it doesn't limit bass to just the CD audio.
Sterling Martin Yes, it will work with any audio.
Thank you!
Where the hell do I tuck the small adapter at ? Sorry just annoyed from trying to figure it out for the past few hours 😂
I connected to the front speakers is that the reason why I’m getting no bass just stereo sound
Yes it would be
I wired up everything exactly as it is in the video. However even with the remote line wired up correctly the amp still draws power with the car off. Any thoughts? Great video btw
Wire up a switch next to the bass adjuster, just need to run some extra wire to the switch but will work. My biggest worry was the firewall.
A fused switch of I think 20amp max would be needed but dont quote me on that but having a fuse will be safer and more well worth your time in the end since it's only power to turn on the amp and nothing to do with main power wire but also buying a smaller battery to hook up before or a battery capacitor if you dont allready have one so you save your battery as much as possible. Getting a smaller battery is better but about 300 to 400 hundred bucks and a battery capacitor is about 50 or 100 and reduces amps going stright to the battery and surging the main battery.
I don't want to use a converter, my amp has a hi-level input, so I'm just gonna connect audio wires at the same places you did, but where can I get the remote signal, is it possible to connect to one of the wires just like you did with the battery one? I got some advice to take the rem signal from the fuse box, but I really don't like that idea. Thanks in advance)
Say Hello To The Robots you could use the same battery wire I used to wire the converter but just make sure that it's only powered when the key is on and not all the time, it's been a while since I did this so I don't remember if it had power all the time or only when the key was on on, you can also wire it to the fuse box using an add a circuit fuse adapter , just find a fuse that only has power when key is on
Thanks for the quick reply, your video is really detailed and helpful)
My car doesn’t have that tan box where the blue wire is supposed to be at?
Are the wire setup the same for a 2021 gti?
Hey man, used the exact same loc2sl as you did but have run into a problem. did you have an issue getting the radio to fit back in after you installed it?
It took me a couple tries, had to put the adapter in there just right so that the stereo would fit, but it wasn't to bad
Hello my friend. I hope you still read and answer questions. First of all, thanx for the video. I’m working on mu instalation, but my rca adapter does not have the remote cable. Any idea which (radio) wire I can use for remote?? ( I know I can use sigarette lighter cable or directly from fusebox, but radio would be a lot easier.)
Hey, just saw your comment, anyways, you could just hook it up to the power wire going to the radio (red wire going to pin 18, there is a link in the description with the wiring diagram)I would just check to make sure it gets power when you turn the key on and that it's not powered all the time (it's been a while since I did this so I don't remember if it's powered all the time or when key is turned on).
Great video man, helped me get all of my stuff into my TSi. Only problem I'm having is getting the radio back into its slot, I used the same adaptor as you did, but it just doesn't want to go back in. Any tips?
Sam thanks, i had the same problem it took me a while to get it to fit, i just pushed the adapter into the hole behind the stereo and wigled it until it went in.
thebeastmedina thanks for the fast reply man! I got it a few minutes ago, had to lay upside down in the seat, but I found a hole above the stereo that I was able to fish it into. Just putting trim pieces back on now, everything is all hidden and clean. Thanks again!
I have a diesel of 2014. Do i also have this rubber behind the battery to go to the inside of the car?
It should they have the same body, not 100% sure tho.
Ok i will check ik the weekend... that looks easy :) if i disconnect the battery for 30 minutes... i dont get any problems?
@@kvmods you will get some lights on your dash,(don't remember wich ones) but they go away after driving a few feet.
How do you get the radio removal tools back out of the CD player?
its been so long since i did this I honestly don't remember!
Figured it out. You have to push the metal tabs on the left and right side to release the keys. I had to use a flat head screwdriver and really push to the point where I thought I might break something. Maybe my keys are too wide, but that’s how you do it. Thanks, good video!
Where did you connect the remote? Which color is that connected to?
the remote connects to the amp the low pass box transfers signal via blue wire to the amp. hope this helps if your still stuck.
Thanks for this video!
hey man. what are those keys called. do u have a link or anything
or wheee can i find them in the store
Thanks for the video man got a question. How did you make the adapter and the cable converters fit back in with the unit? Did you have to position the adapter a certain way or tuck it in a certain place? I got the set up going and It sounds great just got my head unit hanging out bc i can’t get her back in lmao
It took me a while to get it to fit too, I just tried different spots until I found a good place where it would fit, I don't remember exactly how I got it in, it's been a while,
thebeastmedina hey man I’m in the same situation I can’t get it to fit everything else worked out fine. I’ve been trying for hours to get it to fit
I’ve been trying to figure it out all day as well years later 😂
hey man, quick question. I see you are installing a subwoofer in gti s or sport , very nice set up bro however if I want to install a second sub to my se model, how would that work?
thanks
you can use the same adapter but instead of using the signal from the rear speakers like i did you can use the signal from the wires going to the sub woofer at the trunk of the car, that sub has a plug with 4 wires (brown(L-), brown -yellow(R-), white(L+), white-yellow(R+) here is a diagram and plug wire pic I found in a vw forum www.golfmk7.com/forums/attachment.php?attachmentid=3583&stc=1&d=1419285716 www.golfmk7.com/forums/attachment.php?attachmentid=3584&stc=1&d=1419285731
And of course you would have to run power wires for your amp, and for the power for the inverter adapter you can just tie in to the positive and negative wires going to your amp, then just hook the RCA wires from the adapter to your amp, and also the romote wire from the adapter to the romote on your amp.
I hope this helps, I would just double check on the wires going to the stock sub Im not sure if all the mk7 year models have the same wiring.
hello guys, i have made my install exactly like here, but i have a problem....this scosche adapter has so small wires and i can't hide it...and my player does not fit anymore...and as the job was done..came the night and i had to start the car.... all my sensors were blinking and the screen/player was not working anymore.
-so pls give me tip about this adapter.... were/how should i fix it in order to close the player in his clips
-is possile that my player and sensors were not working because the player did not fit fully inside?
thanks
since nobody..reply..i figure out myself
-scosche adapter has small wires so either is connected to a add-on connector ISo type for which you have to buy a VW iso connection-adaptor or you need to just add longer wires which i did - my scoshe adapter is now located on the side near "on-off airbag with good access
-sensor were blinking because i let my battery unconnected for longer period as i was working on the car with the cables
-this fast connectors with clip you find on the market with different quality - i had to change mine with new one's better quality
-ground cable--make sure that the paint is clean away - contact must be on pure metal - i did it on the screw under the right back seat - with no additional wholes
so, the system is working fine now and we reached to the next level SOUNDPROOFING , all my metal body parts from back side and trunck( golf 7 variant) are vibrating ---
Excelente video buena contribución saludos
Gracias.
@@thebeastmedina Where did you get those 3m quick connect pieces?
do them connectors damage the original wires for the cd?
they splice them, but do it in a clean way.. so damage is a questionable term lol. if you dont want them to be cut, then i wouldnt do this
edit: this is the cleanest way that i know of to install a sub. im in the process of doing the exact process of this guy!
It. It’s the original wire and is a pretty lazy ass way to do this. Those wires are now open to the elements. Every system install should at minimum be cut and splice with weatherproof connectors or the proper way of cut and solder all connections.
Guys you need a battery capacitor if your running anything bigger then this is you want to save you cars battery. But I'm going to splice my wires and actually solder them together and shrink wrap atleast to the CD harness wires but also wondering how if I play bluetooth and not a CD since I spliced them only on that harness going to the CD player....mhmmm questions...possibilities.
Can anyone give me a part list I will need ?
I was lookign at getting the same sub. how does it sound. I used to have an infiniti G35 with bose audio. Its a dumb queston but does it hit harder than that.
Dexter Williams it sounds pretty good considering I'm using a crappy amplifier, for the size of this sub/box it's pretty loud, it's not earthquake shaking loud but it puts out enough bass to over power the mids and highs the stock stereo puts out ( not sure how it would sound if it was in a trunk of a sedan.), if that makes any sense. Also no idea how it compares to the sound on a g35.
hello few days ago i bought 4 channel amplifier ALPINE 445U (i have 2017 passat R line) i tried to connect to my factory radio and divide it to four factory speakers but couldnt because my radio doesnt have ACC wire and REMOTE wire if anyone knows what to do please tell me on how to fix it thank you
Can i just change radio what have rca
Why couldn't you take the high-level inputs straight to a DSP without using the device you got at Walmart?
Did you have to cut any wire?
José Guilherme Baiao Oliveira, no i did not have to cut any wires, i used those splice connectors wich dont cut the wire they just cut trough some off the wire plastic, so when you take them of the wire will still be in one piece, might not look as pretty tho.
Thanks for the quick answer. I'm from Brazil and I have a friend coming back from the USA.
Would you mind sending me a link of this connector from ebay, amazon? If you do so, i will be able to ask this friend to bring me the product.
The guy who have installed my amp and sub on my old car have now a lot of concerns about installing the same equipment at the mk7. I will show him your video and it might help a lot.
José Guilherme Baiao Oliveira
3M 03874NA 18-14 Gauge Electrical Connectors 16 Quick Connects, Blue, 16-Pack www.amazon.com/dp/B0058I43B6/ref=cm_sw_r_cp_apa_OxuGzbX63D9QF
Thanks man. Congratulations for the channel
The steel is so hard that my self tappers won’t work on the trunk floor right behind the seat. It’s really pissing me off. I don’t want to have to put a nut and bolt on it.
Where you install the little volume thing for the bass thx
i just left it inside the glove box, I don't use it much, i adjusted the volume of the bass as loud as it would go before cliping, when ever i need to lower or raise the bass I use the EQ on the stereo to udjust it
Do anybody have a mk6 diagrams my wiring is different
Thanks
hi, i just did the same install as you. wired at point 1 and 8 at the iso contact for signal.
but now the screen in the car is black, not functioning, do you know why and how to fix it?
everything else is fine, but the screen is pitch black without responding.
i tried hard reset.
Did you ever figure out what happened? What year is your car? I'm planning on doing this tomorrow on a 2021 gti.. thanks in advance
Did you figure it out?
What's the converter called
nick harrington its a scosche amplifier add on adapter
Where do you get those quick connect pieces?
I got them at Autozone.
@@thebeastmedina Thanks I've got everything hooked up & the only problem I'm having is getting the loc to fit behind the CD player, how did you get it in because I've been trying everything to make it fit!
@@thebeastmedina nevermind about that, I got it in, but how do I remove the keys from CD player?
Nvrmd I got those out too
good video
amzn.to/2n4WLKA - here's a link to the sub
Why don't you show where you wire the remote cable into??
robert lamb I guess I just forgot to record it, the remote hooks up to the blue wire on the adapter 3:13 and then at the remote terminal at your amp.
How did you fir everything back into the radio spot? Im having trouble doing that...
RMS is the important thing ;) my Focal Amp + Rockford Fostage Sub nearly Destroy my rear window with 1kw rms :D
Oh my God this install gave me anxiety
Video was super helpful until it came to the wiring.
goo.gl/images/8JqMbu
There's the harness diagram!
Kevin Bauman glad it was helpful, by the way there is a link to the wiring diagram in the description.
do a better ground ...
Where’s your fuse? Not using a fuse is really stupid considering you might end up putting a couple of hundred of ampère on your vehicle (which will kill you if you get in contact or burn your car down).
Nathan van Dalen 17:07 It's about 8 inches from the battery terminal. It has a cover on it .
gay
Where did you wire the switch live to?