Looking forwards to seeing the crosskart back again, if you have any stability problems with the rear suspension, i would recommend welding a long spar pipe across top to join the two suspension supports (with the three holes) this will compensate for inward pressure and remove some pressure off the frame, as opposed to the two smaller pipes, just a suggestion though, the work you have done is awesome, that's some damn good work man 👌👌👌
really like these videos. :) just one thought, those two pipes conecting the a-arms are really weak, they will bend in the ends(not saying it won't work). they could be replaced with one diagonal tube like this -> |/|
I can see this video is a couple of years old now. I hope you have learnt from your mistakes on the shock pick up, length of shock and rear end geometry and rectified it!
emmanuel cañas hey pal, without writing up an essay I’ll try make it short. In my experience the top shock mounts are way to long and will have to much leverage and snap once under load. (Look up Triangulation in buggy/car builds and how it works) The length of the shocks look to long to me also. For the geometry is the geometric arrangement of the parts of a suspension system and the value of the lengths and angles when all move in cinq, if you build off the top of your head like he has, he will get issues. I’m at all trying to insult what he has done either just my 2 cents from me experiences. 👍
@@SikSwanger I see what you mean now, i did think about the top being to far away from the frame without enough support, as for the long shocks i will take that into consideration, as i am actually building a crosskart and needed some inspiration so i thought i'd watch some videos. Thanks for the advice man.
15-vuotiaana saa ajaa traktorimönkijää, joka ei oo mikään 200cc. Traktorimönkijä saa mennä 40km/h. Uusimman uudistuksen mukaan LT eli liikennetraktori kortilla saa ajaa traktorimönkijää joka kulkee max. 60 km/h, sitä voi myös ajaa C eli rekkakortilla.
Best accent ever :) Like that South African rally driver..can't remember the name...
Nice build !
Your english is getting better. We have always understood what you say but your pronounciation was soooo finnish. Good job
Looking forwards to seeing the crosskart back again, if you have any stability problems with the rear suspension, i would recommend welding a long spar pipe across top to join the two suspension supports (with the three holes) this will compensate for inward pressure and remove some pressure off the frame, as opposed to the two smaller pipes, just a suggestion though, the work you have done is awesome, that's some damn good work man 👌👌👌
lmao how many people have you triggered with your "precision"? So good.
tulleeko kesällä taas sft carage vlogeja koska ne on parhaita👍
+Niko Kuusisto tottakai👍 hetiku ajokausi alkaa kunnolla et saa monipuolista ajomatskua:)
really like these videos. :)
just one thought, those two pipes conecting the a-arms are really weak, they will bend in the ends(not saying it won't work). they could be replaced with one diagonal tube like this -> |/|
I did pipe like that already :)
You have to build one of the coolest since you have access to real tools and all the materials you need dude so far so good do
yes ten minutes of stunt freaks team 😍😍
Is great fun time building shitbox to Ledde Zeppelen.
Pretty cool shop accese to lots of tools!!!love ur videos
veri nice
solid broh!
are those the fox float 2 shocks?
Simple eplanation.. Hhee.. Love this video
what diff, rear axel and hubs are u using?
+Christopher Wickman diff is from speedcar, shafts are from bmw and hubs are selfmade
Very Nice car
on nähny ton ice car livenä Ruokolahti freeski muute tulaa uusiksi tänätalvena
Mikä ton musiikin nimi on joka soi tuol taustalla
tuliko siitä sinisestä kelkasta se uus renggas kelkka ja tuuttako kesäl seinäjoelle miittii?
Nice
"I have no idea what I'm doing".
😨nooo......say it ain't so.
I can see this video is a couple of years old now.
I hope you have learnt from your mistakes on the shock pick up, length of shock and rear end geometry and rectified it!
Hey, i'm curious about what you said, would you mind to elaborate?
emmanuel cañas hey pal,
without writing up an essay I’ll try make it short.
In my experience the top shock mounts are way to long and will have to much leverage and snap once under load.
(Look up Triangulation in buggy/car builds and how it works)
The length of the shocks look to long to me also.
For the geometry is the geometric arrangement of the parts of a suspension system and the value of the lengths and angles when all move in cinq, if you build off the top of your head like he has, he will get issues.
I’m at all trying to insult what he has done either just my 2 cents from me experiences. 👍
@@SikSwanger I see what you mean now, i did think about the top being to far away from the frame without enough support, as for the long shocks i will take that into consideration, as i am actually building a crosskart and needed some inspiration so i thought i'd watch some videos.
Thanks for the advice man.
emmanuel cañas no worries pal.
get onto www.minibuggy.net heaps of info on there!
@@SikSwanger Will check it out, thanks brother!
Ne piirtää kellä on liituu! ja Jos riski on olemassa niin riski otetaan
Miten toi alapää vahvistetaa vai tarviiks sitä vahvistaa hitsien lisäks?
+jonnenne emmä meinaa ku yhen poikki latan laittaa
Can I like twice!
Don't know what your doing with this but shock towers and Heim joints would be far stronger and far superior performance.
Huikee show oli messuilla! Harmi että ne ei ollut tajunnu laittaa yhtää screeniä mihkää ku oli nii paljo jengiä :( mutta silti 5/5
Koska teilta tulee uusia tarroja??
I love northern english accents.
the accents is more like Russian
I believe they are from Finland. It's close to Russia but there are clear differences.
were did you get youre suspension?
Haha love the vid man was funny
ite laittasin vielä vaikka putken tohon säätöpaljoen väliin nii ei välttämättä joustais ja kestäis paremmim🤔
voitteko sft jätkät tehä lisää lintta videoo
How much travel
rälly inglis is vero vahva in this
bartmanapina 😂😂
kuuluuko antti pendikainen viä sft?
topias nikki Ei
millon se on valmis
How many cc? And hp
joo ihan liian hepponen tulee tuosta jousituksen yläpäästä ellet tuo sitä poikittaissuunnassa vielä.
+PHUSII saanähä. Emmä meinaa sitä tukea enempää
mitkä välitykset tossa on?
+tomi suikkari taitaa olla 14-62
oliks toi näytöksessä vai häh????.....
Hello sir I’m building an R6 buggy and need a bigger sprocket. Where can I buy one like yours?
so add a drill their
eka OMG
Haluaisin tietää että saako 200cc mönkijän 15vuotiaana kilpiin ku se menee 75-80km/h
Pitääkö pistää rajotin pienemmälle😂😂
kai juu
Ei kilvet liity mitenkään ikään.
15-vuotiaana saa ajaa traktorimönkijää, joka ei oo mikään 200cc. Traktorimönkijä saa mennä 40km/h. Uusimman uudistuksen mukaan LT eli liikennetraktori kortilla saa ajaa traktorimönkijää joka kulkee max. 60 km/h, sitä voi myös ajaa C eli rekkakortilla.
Eyeetu faktat kuntoon C kortti on kuorma-auto kortti. Rekkakortti on jo asia erikseen eli CE
#1000like
mulla on tommonen sft käppi
SUOMI PERKELE! miullakii on huppari ja käppi
+Oskari Lampinen siistiä!!:)
Stunt Freaks Team mullaki on huppari ja käppi ja mopo on täynnä teidän uber tabea
SUOMI PERKELE! sama
ON
Miks sanot melkei koko ajan öö
koitappa ite puhuu virheettömästi ilman taukoja englanniks videolle nii tiiät!
kaunista
9:10
moi
hyvä kun acdc soi
Eka
Eemil Klasila olin eka XD
eka
Topias Niku et ollu eka mä olin kato vaikka XD
Siel lukee 1 näyttökerta
kuudes
jaa