A mf 135 should start instantly they don't need heater plugs only reason it needs easy start is it must be worn out an engine rebuild would aort that no such thing as a price of metal getting addicted to anything ie easy start that's all bollocks I'm afraid it needs it because it's knackered and won't get better until rebuilt hence needs easy start
I just bought a B-275 here in British Columbia, Canada. The pre-start heat resistor needs changing and I believe there is a better fix for the actual glow-plugs from Bosch. The connection is not in series, so if one fails, the other 3 will still work. I ordered them this week, so will do a video and post when I do the install. Thanks!!
Nice job Tom. Big pat on the back. Got to keep up ur maintenance to keep reliability. That said you and your dad need a slapped wrist for the knacker lacquer! You naughty naughty boys!!!!!
Nice job Tom every day is a school day! Avoid the deadly easy start on any diesel as it has a horrible habit of shattering/cracking the piston rings over time which lowers the compression and makes starting without the easy start extremely difficult on an engine that's been started too much with it! Best top tip to aid starting if it's cold or unwilling to go a rag soaked in something flammable lit and held over the intake manifold (remove filter/oil bath filter first ) as you crank it takes the warm air into the cylinder and helps combustion start Saying that I have started several troublesome diesels in the cold with the application of wd40 top which is probably not recommended either! Well done for the repair keep exploring new mechanical horizons you can be the UK version of ChuckE2009!! ☺
Great job Tom - I've heard before that engines can get 'addicted' to Easy Start and always wondered is that when you have to send them in to 'rehab'?! ;)
Is this a precursor to the use of a glow plug relay? Can anyone answer its quite fascinating that its not actually putting the heat into the motor. Why is this not fitted into the air intake? Replies very much appreciated and very best regards.
Well done Mr mechanic Tom. Now.....easy start, and why I hate it. Many many years ago I saw an engine that had tried to be started with it......BOOM is the word. Engine had literally blown up. Broke the crank, bend conrod, forced piston crown onto the conrod (I kid you not). But worst of all it had actually torn the block apart on the main bearing at the back end. The only engine I've seen with worse destruction is a dragster engine that has literally blown the heads off.
Keep her off the ether, it's combusts and produces much higher compression and those little inters have got a thin water jacket which will crack with the following extra pressure
Not all o these pepperpot are the same amperage resistance so it's possible that u may have been using the wrong one, and watching ur video that is heating up in less than half the time o the B 275s we use for vintage ploughin 🤔 ours take about 20 to 25 seconds to heat up 👍💪💪
They get “addicted” because you wind up filling the entire intake path with ether, which can easily take the stone cold engine past governed speed before there is any oil splashed around… i always thought those “resistors” out in the dash were a silly idea. Should have put it in the intake to spend that energy in heating the engine to help the start. An amp gauge would be far more useful to tell you what the glow-plugs are doing, and what the alternator is doing after it is running…
It always amazes me how you British can pat your own back by simply using 2 screwdrivers LOL . We do call that a glow plug here also ! Nice video Tom 👍
Good old tractor should be pensioned off,its earned its. retirement. Use of that silly stuff will mean using it in the summer mornings even when quite warm. Another interesting video Tom.
change the glow plugs for the modern type plugs and forget about the pot, it will have failed again by now I reckon, modern replacement parts are crap for the old resistors
They are called spark plugs for a petrol engine where with a diesel they are called glow plugs as they don’t actually spark. Also you probably call fertiliser TIL as its name is tertiller so till for short
.... cant believe youre ruining the lyrics of such an iconis anthem! "... so hit the diff and prey that she goes all the way" "... and a can of easy start" lols
Tom if you want a pat on the back sit under a cow lol!
Projects 69 😂😂😂😂
🐄 💩 😂😂
YAY! The best TH-camr is back in business!!!
Love waking up to farm life vids ,keep me coming Tom
Great job, Glade your keeping the ol international in tip top shape.
Love your videos Tom, keep up the good work mate!
absolutely love watching your videos! - well, that was a nice quick fix :)
A nice quick fix, good video Tom.
Thank you tom I have learned something today. Loved the video
That takes me back! We had an MF135 as our scraper tractor and it was fully addicted to easy start. Well done Tom
A mf 135 should start instantly they don't need heater plugs only reason it needs easy start is it must be worn out an engine rebuild would aort that no such thing as a price of metal getting addicted to anything ie easy start that's all bollocks I'm afraid it needs it because it's knackered and won't get better until rebuilt hence needs easy start
Nice to see you can mend stuff as well as break it 😉 that little Nash runs real sweet though 👍
Top man Tom. Another great vid .
Nicely done tom
Tom, you're like me....'Jack of all trades, master of none'. Good job.
S. Michael DeHart aka WVUmounties8 Hahah pretty much!
Very helpful I hope I can use this for the restoration of the international 354
Thanks Tom alway to go!
My guy loves his chips that much he installed a salt shaker on his Tractor xD
great job Tom
Good video Tom 👌👍
Am glowing on you Tom, 👏👏👏👏👏👍.
Looking forward to this !
Good job Tom
Well done tom your getting there. From Andy
Perfect video♥♥
Nice one mate pat on back for you👍
Another great video
Well done Tom, next step light switches and outlets!
Awesome tom il have to come and teach you how to repair all your tractors and machines lol nice one tom keep it up fella 🤘
Htdhbikes/00networker You will 😀
Great fun vid as usual. We had an international it was as cold as a witches heart !!
Diggin the world away They need that heat, starts fantasticlly now
Righty tighty lefty loosey there bud
Unless it's a left hand thread... 😂
Good job!!!!
Small things are Good things Tom
So the wife says lol.
Great Video Tom. Have a Great Weekend
Ricky West 🤣🤣🤣🤣
Great video
Great gob tom
Nice video keep them up 😎😎😎😎😎😎😎😎😎😎
Great vids as always mate whats vid is next
She’s a runner 🚜 👍
I also had a cow that always went muuuuh in the right moment. She was a sweetheart xD
Little jobs sometimes the most satisfying, starts and runs sweet as a nut, not quite a fergie but not bad 😁
Good. Vid as always in your next vid u could learn Jo how to drive the hurliman
I just bought a B-275 here in British Columbia, Canada. The pre-start heat resistor needs changing and I believe there is a better fix for the actual glow-plugs from Bosch. The connection is not in series, so if one fails, the other 3 will still work. I ordered them this week, so will do a video and post when I do the install. Thanks!!
Good day from Ontario Yes do a video on that. I remember our 414 it was if 1 didn't work they all didn;t Thanks
Man! You're putting my channel out of business as well! 😋
I got a b275 on my farm they are some best and so simply
ytwill caseyt Great little tractors !
Nice vid
Your mic was in the picture . Great job
Nice job Tom. Big pat on the back. Got to keep up ur maintenance to keep reliability. That said you and your dad need a slapped wrist for the knacker lacquer! You naughty naughty boys!!!!!
H.S AGRICULTURAL 😂
BIG PAT on the back 🥇🌟👍
mrsgbee Thanks ! 😀
Yes I’m early how are you tom
Nice job Tom every day is a school day!
Avoid the deadly easy start on any diesel as it has a horrible habit of shattering/cracking the piston rings over time which lowers the compression and makes starting without the easy start extremely difficult on an engine that's been started too much with it!
Best top tip to aid starting if it's cold or unwilling to go a rag soaked in something flammable lit and held over the intake manifold (remove filter/oil bath filter first ) as you crank it takes the warm air into the cylinder and helps combustion start
Saying that I have started several troublesome diesels in the cold with the application of wd40 top which is probably not recommended either!
Well done for the repair keep exploring new mechanical horizons you can be the UK version of ChuckE2009!! ☺
David Jordan I didn’t know that you know 😀
great video tom i can see a second youtube channel starting soon.
Tom 30 Hahha ones enough 🙈
Enjoyed
Like that International
Easy start best thing going
the classic "pat on the back for meeee!"
rob miller Hahahha
Great job Tom - I've heard before that engines can get 'addicted' to Easy Start and always wondered is that when you have to send them in to 'rehab'?! ;)
Craig Thompson I have heard this aswel, it’s just to easy to use instead of fixing things
Did you see Mrs Stoneyridge Farmer wearing your TP Merch on his chipper vlog?
GardenGolf I did!! 😀
Well Tom
Tom please upload more videos ❤️❤️
rshansonr I struggle with time 🙈
I can understand mate
Is that what heats up the fuel to cold start?
Keep fixing it up
You can buy the coil separately works out a lot cheaper have same tractor had to replace a few times
Brian Mccullagh No way!! That would be really handy
I call it an gloeispiraal or gloeiplug that's Dutch for glowplug
Is this a precursor to the use of a glow plug relay? Can anyone answer its quite fascinating that its not actually putting the heat into the motor. Why is this not fitted into the air intake? Replies very much appreciated and very best regards.
Well done Mr mechanic Tom. Now.....easy start, and why I hate it. Many many years ago I saw an engine that had tried to be started with it......BOOM is the word. Engine had literally blown up. Broke the crank, bend conrod, forced piston crown onto the conrod (I kid you not). But worst of all it had actually torn the block apart on the main bearing at the back end. The only engine I've seen with worse destruction is a dragster engine that has literally blown the heads off.
MalcOfLincoln it’s a nightmare sometimes!
Don, t know anything about tractors..... I do now! Also you seem in such a great mood Tom... what's the reason? 😉
Julie Alderson No idea mate
Keep her off the ether, it's combusts and produces much higher compression and those little inters have got a thin water jacket which will crack with the following extra pressure
Not all o these pepperpot are the same amperage resistance so it's possible that u may have been using the wrong one, and watching ur video that is heating up in less than half the time o the B 275s we use for vintage ploughin 🤔 ours take about 20 to 25 seconds to heat up 👍💪💪
Robert Paterson Ours have always heated up pretty quickly
They get “addicted” because you wind up filling the entire intake path with ether, which can easily take the stone cold engine past governed speed before there is any oil splashed around… i always thought those “resistors” out in the dash were a silly idea. Should have put it in the intake to spend that energy in heating the engine to help the start. An amp gauge would be far more useful to tell you what the glow-plugs are doing, and what the alternator is doing after it is running…
Mine takes about 20 seconds to show any glow at all. Think that may be an electrical issue ?
It always amazes me how you British can pat your own back by simply using 2 screwdrivers LOL . We do call that a glow plug here also ! Nice video Tom 👍
Dave Kimbler Hhahaha Make the little things count 😀
I wish my Ford 4000 had a location I could install a glow plug on.
It should have a heater plug blanking plug in the manifold if it is a 64 - 76 model
Yeah we call them Glow Plugs in the Scottish Borders. 😀😀🌷❤🌷
❤
When you going to do the servicing video then Tom
brink210 Hahahahah next video.. I’m taking the hurlimann apart hhahah
Tom... all you have to remember is righty tighty lefty Loosey hope it helps....
i dont think olf is worried yet great video though
and 10.000 people cherred but not johnny couse hes deaf and didn't hear it start thanks tom
If it keeps blowing it could be because of the battery in the tractor maby try different batteries
GMaskell Farm Photography I’ll keep that in mind mate 😀
how tights a tiger tom ?
allan1985 Tight!! 🐅
i think your pretty red tractor could need some sanding and a new paint of red to become beautiful
Lefty Loosey Righty Tighty 4:46 😉👍🏼
This time next year you’ll be sending rockets to the moon 😂
John Pattinson hahahah
How's the foot bath working out for u
Aaron Lennon Corcoran Really well I think 😀
@@TomPembertonFarmLife that's good to hear hopefully it'll clear up the problem
Lefty loose righty tights dude lol
Have you done a milking video yet? If not could you?
Adiboo 814 Need to get this done tbh
he you seen the no arms fram
jamie long That guy is incredible
you need magnetic screwdrivers..:)
Will the channel be renamed 'Tom Pemberton Farm Mechanic'? :)
Damien Jordan hahahahah
O wa w
Kc
looket like sigarett ligther heheh
Good old tractor should be pensioned off,its earned its. retirement. Use of that silly stuff will mean using it in the summer mornings even when quite warm. Another interesting video Tom.
John Powell I know job! It’s not good for it
change the glow plugs for the modern type plugs and forget about the pot, it will have failed again by now I reckon, modern replacement parts are crap for the old resistors
Easy start is not goof for the engine. We blew up an engine while using easy start on our ferguson 35
Morgan owen It’s just like a bomb in a can
@@TomPembertonFarmLife that true
Love ur vids
They are called spark plugs for a petrol engine where with a diesel they are called glow plugs as they don’t actually spark. Also you probably call fertiliser TIL as its name is tertiller so till for short
Nick Crawford Nice! I never New that
why not a light save the power to the glow, looks like a cigarette lighter
.... cant believe youre ruining the lyrics of such an iconis anthem! "... so hit the diff and prey that she goes all the way" "... and a can of easy start" lols
im the first view 😂😂
rob miller I’m the first viewer
Start doing shouts pleeeeeeease!!!!
should be called cigarette lighter
you didnt fix it you replaced it with a new part