Making and tuning a perfect sounding 2 octaves Wooden Tongue Drum (by a musician & for musicians).

แชร์
ฝัง
  • เผยแพร่เมื่อ 1 ต.ค. 2024
  • Here is how I made my Tongue Drum. I am not a professional woodworker, I do have some basic skills and tools but you don't have to be a carpenter to make this.
    The range is D3-C5, almost two octaves. It is diatonic, and tuned in C major scale.
    The board is padouk, 18mm thick, 220mm x 350mm.
    The frame is ashwood, 160mm high, 18mm thick.
    I created my own design, you can create your own too without fear. The shape isn't really important, you can adjust everything with an accurate tuning process.
    Tools needed :
    a jigsaw with a narrow blade
    a good plane
    a gouge & a wood chisel
    a router
    a drill
    a miter saw (mine is not large enough so I had to use my ribbon saw)
    some clamps, straps, and wood glue
    The woodwork isn't perfect but the sound is as good as expected ( I'm a professional musician ).
    I have also built a bass tongue drum, an octave lower but only 7 notes, you will see it at the end of the video.
    Here is a better sounding track so you can hear how these drums are really capable of :
    • DIY Wooden Tongue Drum...

ความคิดเห็น • 227

  • @eduard647
    @eduard647 4 ปีที่แล้ว +135

    The tune at the end sounds like an early 2000s playstation game song

    • @DV1General
      @DV1General 4 ปีที่แล้ว +5

      I immediately thought I was playing Jak and Daxter

    • @robbe73
      @robbe73 4 ปีที่แล้ว +12

      The Crash Bandicoot soundtrack has some of these vibes too.

    • @charbri_8855
      @charbri_8855 4 ปีที่แล้ว +1

      I was thinking every zoo/safari based shows sound track ever

    • @hiiambarney4489
      @hiiambarney4489 3 ปีที่แล้ว +1

      @@robbe73 Haha heck jeah. Instant Jungle feel

    • @SaintJames14
      @SaintJames14 3 หลายเดือนก่อน

      Dark Cloud vibes 100%

  • @Trathaal
    @Trathaal 4 ปีที่แล้ว +171

    “I use a very high-end table saw”
    XD

    • @NimsChannel
      @NimsChannel 4 ปีที่แล้ว +1

      I saw one of ryobi's chop saws break on the arm and the blade section went flying.

    • @Trathaal
      @Trathaal 4 ปีที่แล้ว +2

      NimsChannel yikes! Gotta wear protection for a reason

    • @NimsChannel
      @NimsChannel 4 ปีที่แล้ว +1

      Protection won't help with that. lol. Better build quality might. He's lucky it landed into his chest blade side away.

    • @Trathaal
      @Trathaal 4 ปีที่แล้ว

      That IS pretty lucky! :O

  • @MrSaemichlaus
    @MrSaemichlaus 4 ปีที่แล้ว +222

    That tune in the end sounds like a ringtone I'd install.

    • @squidguy7907
      @squidguy7907 4 ปีที่แล้ว +4

      You could make it one, I know how on apple devices

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว +21

      @@squidguy7907Well I should deposit this tune, if I get royalties every time a phone rings I will be a millionaire soon.

    • @squidguy7907
      @squidguy7907 4 ปีที่แล้ว

      ​@@narnodel2 id use it if i could

    • @killyouwithfire
      @killyouwithfire 4 ปีที่แล้ว

      Arnaud Delannoy can you upload it somewhere, I really want it as a ring tone

    • @PIANOvseMyZvezdyHalubtsova
      @PIANOvseMyZvezdyHalubtsova 2 ปีที่แล้ว

      Привет! Посублимируем вместе весну??? 5 минут и она всю ночь будет крутиться у вас в голове,🌸🌿🌸🥰🎹🎹

  • @Leispada
    @Leispada 4 ปีที่แล้ว +233

    Plays each note separately - me: yeaa idunno dude... sounds off
    Plays final tune - me O_O *changes to loincloth** im feeling this one

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว +17

      Yes the sound wasn't great in this first try. I have added the bottom of the case since then, the sound is much better. I have also put 7 piezo pickups in the bass tongue drum (on per note), connected to a good amplifier the sound is awesome !

    • @Leispada
      @Leispada 4 ปีที่แล้ว +2

      @@narnodel2 Im lovin it man, excellent work :D

    • @FlourescentPotato
      @FlourescentPotato 4 ปีที่แล้ว

      lmfaooooo

    • @gotthisbro
      @gotthisbro 4 ปีที่แล้ว +1

      Me already in my loincloth... THIS IS MY FUCKING JAM!

  • @WCGwkf
    @WCGwkf 4 ปีที่แล้ว +39

    I want to see the bass version of these, just a huge slab of wood

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว +9

      Yes, I have build a bass tongue drum which you can see on the music sample at the end of the video. But the overall size of this bass tongue drum is too small, it is not resonant enough, I had to add some piezo pickup to make it usable. But since the Paduk is a very expensive wood, I didn't want to make large instruments at first...

    • @WCGwkf
      @WCGwkf 4 ปีที่แล้ว

      The one that has a single row? I can see it being expensive but worth it! Theres a store near me that has large pieces of exotic slab wood and its definitely expensive!

    • @ddogg14
      @ddogg14 4 ปีที่แล้ว +2

      Let's make a subcontrabass version the size of Kansas

  • @PIANOvseMyZvezdyHalubtsova
    @PIANOvseMyZvezdyHalubtsova 2 ปีที่แล้ว +2

    Привет! Посублимируем вместе весну??? 5 минут и она всю ночь будет крутиться у вас в голове,🌸🌿🌸🥰🎹🎹

  • @justinward4044
    @justinward4044 4 ปีที่แล้ว +17

    Does the type of wood have an immense effect on the instrument? I figure density will probably play a bit of a role in it

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว +7

      It does. I think the sound will be very bad with coniferous wood, I could have tried with oak but since this is a long process to make a drum, I tried with the best wood possible. I could have spare 10$ with a cheaper wood, but I don't regret to have bought paduk for this project. All marimbas and xylophone of the world are build with exotic dense woods, I guess it's for a reason !

    • @Xaltar_
      @Xaltar_ 4 ปีที่แล้ว +8

      @@narnodel2 Several reasons actually but most importantly, longevity. There are some lovely light, soft woods that have amazing tone and resonance but they get absolutely destroyed after a very short time. Tuning goes out as the fibers compress and the tone shifts a lot more with humidity changes. This is according to a traditional Marimba maker I spoke with in Africa. He showed me Marimbas made of anything from pine to tortoise shell. Hearing a marimba band of 34 people was truly breathtaking.

    • @Georgia-Vic
      @Georgia-Vic 3 ปีที่แล้ว +1

      and you'd be correct! there are specific types of wood used for African Slit Drums. Density is the main requirement along with others like:flexibility and tensile strength, how much moisture a wood will absorb or repel, how much resistance a wood will endure under hot & cold temperatures all of which will affect the resonance of the body as a whole.Btw the top or Head should not be permanently affixed to it's other 4 sides since all heads will either be damaged over a period of time due to playing, cracking and/or wear and plus the heads need to be able to be interchangable, because heads have different distinctive tones of tuned musical scales!

  • @Loebane
    @Loebane 3 ปีที่แล้ว +2

    I played this and my phone said the song that was playing at the end was "The Patient - Tool"

    • @rust3152
      @rust3152 3 ปีที่แล้ว

      hey thats a good song

  • @P_X_H_
    @P_X_H_ 4 ปีที่แล้ว +6

    Where can i find music like this. Is there any on Spotify? Great video! Sounds amazing!! Just like donkey kong country for SNES 🙂

  • @samstits8982
    @samstits8982 2 ปีที่แล้ว +1

    Do you know if there’s a specific spot where I should drill into the bars when tuning them. Under where you strike? in the middle of the bar?

  • @jackallenproductions
    @jackallenproductions 3 ปีที่แล้ว +5

    This is incredible. I want to try this project myself. Fantastic job.

  • @NezNar
    @NezNar 3 ปีที่แล้ว +3

    I love your tablesaw man cutting edge tech right there.

  • @agfzagfsz29yaxrt67
    @agfzagfsz29yaxrt67 4 ปีที่แล้ว +2

    monkey island vibes

  • @MortenBN1988
    @MortenBN1988 4 ปีที่แล้ว +4

    *runs into weird wooden mask* HOOKAH-BOOKAH!!!

  • @chandalf4500
    @chandalf4500 4 ปีที่แล้ว +53

    4:20 - put it on spotify! :D

    • @AnnoDominiMCMXCV
      @AnnoDominiMCMXCV 4 ปีที่แล้ว

      John-T. Lypsilon It sounds like a future standard iPhone ringtone.

    • @chandalf4500
      @chandalf4500 4 ปีที่แล้ว

      @@AnnoDominiMCMXCV I hope they will pay him well then

    • @CuroxX
      @CuroxX 4 ปีที่แล้ว

      This is literally the ambient music from planet zoo its not original lol

    • @chandalf4500
      @chandalf4500 4 ปีที่แล้ว

      @@CuroxX lol

    • @CuroxX
      @CuroxX 4 ปีที่แล้ว

      John-T. Lypsilon look it up

  • @NicholetteChua
    @NicholetteChua 4 ปีที่แล้ว +8

    I just found my new favourite instrumental!

  • @francesatty7022
    @francesatty7022 4 ปีที่แล้ว +2

    why are you using da and sol and mi and all of those instead of letters?

    • @GraveUypo
      @GraveUypo 4 ปีที่แล้ว

      because a lot of (most?) countries use that notation. he's not american probably.

    • @francesatty7022
      @francesatty7022 4 ปีที่แล้ว +1

      @@GraveUypo oh I didn't know that. Also, Europe uses letters too (I'm European)

    • @herm1301
      @herm1301 4 ปีที่แล้ว

      Frances Atty i think he is focusing the attention on the scale which is easier with do re mi etc or numbers.

  • @Experienceshare.
    @Experienceshare. ปีที่แล้ว +1

    Can you list the order of your notes one this?

  • @caelestisnox7045
    @caelestisnox7045 4 ปีที่แล้ว +5

    The outro has me straight up vibin

  • @Asdayasman
    @Asdayasman 4 ปีที่แล้ว +1

    That upside down jigsaw setup is fucking terrifying. Lemme just fire a hot saw blade into my eyeball and cook it when it fails.
    Use a scrollsaw.

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว

      I don’t have a scrollsaw, otherwise I would have use it !

  • @LesskoBrandon
    @LesskoBrandon 4 ปีที่แล้ว +6

    never have i been so excited about wood

  • @pianoclase8813
    @pianoclase8813 3 ปีที่แล้ว +2

    Genial!!! El sonido que produce ese instrumento es muy parecido al de una marimba...

  • @sirberu1529
    @sirberu1529 4 ปีที่แล้ว +3

    Me with tongue drum: *Normal Drum Sounds*

  • @AnonymousUser-in9yn
    @AnonymousUser-in9yn 10 หลายเดือนก่อน +1

    I think I don't have to be poor no mo

  • @hisokaamorou318
    @hisokaamorou318 4 ปีที่แล้ว +10

    it's like a song that would fit in minecraft

    • @The8B1tWarrior
      @The8B1tWarrior 4 ปีที่แล้ว +1

      It's the minecraft note block

  • @mattiacenacchi726
    @mattiacenacchi726 4 ปีที่แล้ว +3

    I can't even play a c chord in guitar hero tuned.

  • @Szobiz
    @Szobiz 4 ปีที่แล้ว +12

    i'd be 100% unable to do any of that

  • @SomeoneCommenting
    @SomeoneCommenting 4 ปีที่แล้ว +2

    Do these follow any standard note pattern so that any player can always know where the notes are, or will you be stuck with the one that you made because your notes were randomly placed, and once you get used to it you will find difficult to play one made by someone else?

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว +1

      There is no standard pattern for tongue drums, they are different from one brand to another, and mine is unique too...

  • @kostaraskaram
    @kostaraskaram 3 ปีที่แล้ว +1

    Civ3 menu song in the end

  • @justinbarnes3857
    @justinbarnes3857 ปีที่แล้ว +1

    what is the wood you used?

  • @blackwater7183
    @blackwater7183 4 ปีที่แล้ว +3

    I def heard that song on the last part in the Discovery channel.

  • @franciscoherrerogonzalez6669
    @franciscoherrerogonzalez6669 2 ปีที่แล้ว +1

    hola por favor plano con medidas en cm, y grosor de la tapa acustica .

    • @narnodel2
      @narnodel2  2 ปีที่แล้ว

      Tout est écrit dans les sous-titres

  • @jasonpillingmusic
    @jasonpillingmusic 2 ปีที่แล้ว +1

    I'm curious if it stays in tune...4yrs later? e.g. moisture in wood may change pitch of things?

    • @narnodel2
      @narnodel2  2 ปีที่แล้ว

      That is a good question, I checked yesterday with my tuner, the pitch hasn't changed 4 years later. But the instrument stayed at home, maybe it wouldn't have been as stable if I've had played it outside every day.

    • @jasonpillingmusic
      @jasonpillingmusic 2 ปีที่แล้ว

      @@narnodel2 thanks for the update...it's an interesting instrument to consider building. I was trying to think of a clever way to make it fine tune-able....maybe a sliding bar weight underneath? But maybe your results shows that detail is not needed!

    • @narnodel2
      @narnodel2  2 ปีที่แล้ว

      ​@@jasonpillingmusic Yes you can fine-tune it with sticking some weights at the end of the bars. On my first tries, before removing wood at the base of the bar, I used this method which is reliable (unless you try to drop the pitch a fifth down !). It could be a solution if you are afraid that your drum won't stay in tune, first tune it slightly too sharp by scraping the wood, the finish the tuning by sticking metal weights. So later you will be able to tune the bars up of down if the drum is out of tune.

  • @flopasen
    @flopasen 3 ปีที่แล้ว +1

    love the table saw!!

  • @john69sjourney15
    @john69sjourney15 4 ปีที่แล้ว +7

    sound amazing

  • @ThePixarLamp
    @ThePixarLamp 4 ปีที่แล้ว +2

    "basic tools". Proceeds to use all of the workshops tools

  • @JadeDRail
    @JadeDRail 2 ปีที่แล้ว +1

    I want to lazercut this, i have no idea how ill manage to tune it

    • @narnodel2
      @narnodel2  2 ปีที่แล้ว +1

      lazercut it if you want, but you will have to tune it by hand !

  • @LoanSharkSama
    @LoanSharkSama 4 ปีที่แล้ว +6

    this is amazing dude

  • @Namchem
    @Namchem 4 ปีที่แล้ว +2

    This gives me safari vibes.

  • @JamesReubenGruta
    @JamesReubenGruta 4 ปีที่แล้ว +2

    Sounds like tears for fears!

  • @cocosloan3748
    @cocosloan3748 3 ปีที่แล้ว +1

    Veeerrryy good !

  • @nxcove
    @nxcove 4 ปีที่แล้ว +6

    Thank you for sharing, it's very interesting!

  • @sutusmihaly
    @sutusmihaly ปีที่แล้ว +1

    ..awesome 🙂

  • @amalperera3074
    @amalperera3074 3 ปีที่แล้ว +1

    Tanks 👍👍👍

  • @GraveUypo
    @GraveUypo 4 ปีที่แล้ว +1

    i only have a spoon and a rubber hammer. Can i still build one of these?

  • @xx_latte_g9104
    @xx_latte_g9104 4 ปีที่แล้ว +1

    Wow very talented

  • @fajarsuryantoro7025
    @fajarsuryantoro7025 4 ปีที่แล้ว +2

    that table saw ain't common tool

  • @marcelagaidova302
    @marcelagaidova302 3 ปีที่แล้ว +1

    👏👏👏👏💗

  • @nightsecurity4003
    @nightsecurity4003 4 ปีที่แล้ว +1

    Donkey kong 64 that’s all I’m hearing

  • @emmanuellicup
    @emmanuellicup 3 ปีที่แล้ว

    Nuce work... Keep it up... Already parked here... God bless

  • @tylergould3679
    @tylergould3679 4 ปีที่แล้ว +5

    Where did you get the padouk from?

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว +3

      I bought it in a local sawmill

  • @MustObeyTheRules
    @MustObeyTheRules 4 ปีที่แล้ว +1

    I wonder how a much softer wood like fir, spruce, Cedar or pine would sound as the resonant top? I imagine not near as resonant as the dense woods I see are typically used on these.

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว +1

      There would be a sound, but I don't think coniferous wood will give you a nice tone, they are way too soft. If you want to try to build one without buying exotic woods, maybe try with beech or oak which have a harder wood.

  • @AftertuneMusic
    @AftertuneMusic 4 ปีที่แล้ว +1

    There is some kontakt libraries for this sound? Everyone know something about it?

    • @59michaelash
      @59michaelash 4 ปีที่แล้ว

      Aftertune They play 21 samples across 3 octaves starting at 4:05. You could record the audio from this video using AudioHijack, then slice up the audio, each to a different white key (7 diatonic notes per octave) spanning 3 octaves. It would take a bit of prep, but if you trimmed the slices to the start of each transient and added some fades, I'm sure you could have an "instrument" in about an hour. Define a velocity range + compression, maybe some reverb with a short decay time. Hope this helps!

  • @EduardoRiter
    @EduardoRiter 3 ปีที่แล้ว +1

    Great job! Fantástic. Subscribed.

  • @chago7606
    @chago7606 4 ปีที่แล้ว +4

    @4:20 Is that an actual song or you just going along to the rhythm?

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว +3

      It's just an improvisation.

    • @chago7606
      @chago7606 4 ปีที่แล้ว

      @@narnodel2 when I first heard it I replayed it 5 times its an amazing tune 🙌

  • @Cyrus_Bright
    @Cyrus_Bright 4 ปีที่แล้ว +3

    This is really cool, I'd love to try and build one of these myself (which I want to try sometime in the future) but I lack pretty much all the fancy tools that I see people using lol XD

    • @rainerzufall689
      @rainerzufall689 4 ปีที่แล้ว

      You lack a jigsaw, a router, sand paper and some chisels? What kind of workshop do you have??

    • @korok2619
      @korok2619 4 ปีที่แล้ว +1

      @@rainerzufall689 just no workshop like the majority of ppl i guess

    • @rainerzufall689
      @rainerzufall689 4 ปีที่แล้ว

      @@korok2619 Excuse me but if you have no tools you don't have a workshop I guess?

    • @korok2619
      @korok2619 4 ปีที่แล้ว +2

      @@rainerzufall689 yep, thats what i said

  • @ghostypup
    @ghostypup 3 ปีที่แล้ว +1

    brilliant

  • @S.yean.O
    @S.yean.O 4 ปีที่แล้ว +2

    Very nice, and very good.

  • @troubledspirit3328
    @troubledspirit3328 4 ปีที่แล้ว +1

    Excellent

  • @sixstringedthing
    @sixstringedthing 4 ปีที่แล้ว +2

    Straight up stealing the idea for the "high end table saw", that's genius.
    And being a musician, I guess this would be a pretty nice project to start with. Thanks for the video!

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว +1

      Yes I'm a musician too, not a woodworker, and this project is not too complicated to start with. Good luck !

    • @Asdayasman
      @Asdayasman 4 ปีที่แล้ว

      It's not genius, it's suicidal. The blade is meant to be on the opposite side of the workpiece to your important parts.

    • @sixstringedthing
      @sixstringedthing 4 ปีที่แล้ว +2

      @@Asdayasman Suicidal? Stop clutching your pearls mate, it's a bloody jigsaw. I've been using power tools since my late teens (I'm 41). I've been taught the correct way to use most of them, and the rest I taught myself by watching professionals online. Yes, I was also taught that you should never modify a power tool, and I'd never attempt something like this with a grinder, circ saw, recipro saw, cold cut saw, drop saw, or anything like that. But in this case, wearing safety goggles and a pair of suitable gloves mitigates about 99% of the risk in this clever modification, as long as you're not a moron and you engineer it correctly. I've fabricated enough stuff in my time to be fairly confident that I'll be able to use this without dying and with all my digits intact when I'm done. 😉

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว

      Yes, it is just a jigsaw, and a small, weak battery powered jigsaw. I would choose another tool if I wanted to commit suicide.

  • @tamer27antepli
    @tamer27antepli 4 ปีที่แล้ว +1

    Is this the iPhone ringtone instrument lol

  • @kiranranjitkar2748
    @kiranranjitkar2748 4 ปีที่แล้ว +3

    Beautiful and Great.

  • @ewh88
    @ewh88 4 ปีที่แล้ว +1

    Cool, now let make some NPR music

  • @TheNyhm1
    @TheNyhm1 3 ปีที่แล้ว +1

    Nice mellow sounds. Great work

  • @monkeybunny89
    @monkeybunny89 4 ปีที่แล้ว +3

    Thank you for inspiring me to buy rather than make lolol

  • @jaydenbrumous2582
    @jaydenbrumous2582 3 ปีที่แล้ว

    There is something for everyone on Stodoys website.

  • @nelsonx5326
    @nelsonx5326 4 ปีที่แล้ว +2

    Very cool.

  • @jarnoverhoeven3118
    @jarnoverhoeven3118 4 ปีที่แล้ว +1

    That sounds great!
    Gotta say, your jigsaw table is very nifty, I do not have a bandsaw, so using a jig saw like that could help in same situations. Your handplane might need a bit of sharpening I think :-)

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว

      Yes, that is a very cheap plane, and I’m not very good at sharpening. You can use the tool you want to cut the frame, I used my bandsaw but there is other ways !

  • @bandobandit353
    @bandobandit353 4 ปีที่แล้ว +2

    Is there a way to know how long each tongue should be?

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว +2

      About 15cm on the bass side, and 8cm on the treble side. But as I said the precise length is not very important, the most important is how you tune it with the router and the gouge.

  • @GATEWAYFLMZ
    @GATEWAYFLMZ 4 ปีที่แล้ว +1

    1:02 some important shit right there

  • @dennisriderTv
    @dennisriderTv 3 ปีที่แล้ว

    Sending full support

  • @amiak6624
    @amiak6624 4 ปีที่แล้ว

    Its sounds like i play the sand lvl in old game

  • @operator_r
    @operator_r 4 ปีที่แล้ว +1

    красивая мелодия в конце видео

  • @davidhogins431
    @davidhogins431 4 ปีที่แล้ว +1

    Tfw with common tools

  • @jameshuntley428
    @jameshuntley428 หลายเดือนก่อน

    What is the starting thickness of the top? As you were trimming it back it looks quite thick (relative to a guitar back or Tom drum)

    • @narnodel2
      @narnodel2  หลายเดือนก่อน

      It is 18mm thick, but I can’t promise it is the best thickness ! Worked well for me

  • @ceaselessvibing5997
    @ceaselessvibing5997 4 ปีที่แล้ว +1

    TH-cam Subtitles: [Music]
    Me:

  • @Motowad
    @Motowad 4 ปีที่แล้ว +22

    “Basic” tools, for a carpenter maybe

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว +13

      As I already answered, this is basic tools for anyone who does some woodworking. When I posted this video, the only other video which describes how to build a nice tongue drum uses several thousands $ tools, like a computer controlled router for example. The only tool on this video that costs more than 150$ is the ribbon saw, and I could have cut the frame by hand. I don't pretend that you can build this drum with a kitchen knife and a glue gun !

    • @kenpumphrey8384
      @kenpumphrey8384 4 ปีที่แล้ว +12

      He did use very basic tools. FFS, he cobbled together a very cheap Ryobi jigsaw into a scrollsaw table. Damned ingenious of him. A router, drill, a few clamps, hand planer and some chisels. Any man should have these tools in their garage. This guy demonstrated just how little is needed to produce some fantastic work. Great job to Arnaud.

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว +1

      Thank you very much ken

  • @BlueButtonMasher
    @BlueButtonMasher 4 ปีที่แล้ว

    next project build a pedal to pull the strap on your tool. foot in a loop is not safe at all.

  • @BrianSmith-ey9js
    @BrianSmith-ey9js 4 ปีที่แล้ว +1

    Brilliant. Just terrific.

  • @danielhall67
    @danielhall67 ปีที่แล้ว +1

    Do you sell these?

    • @narnodel2
      @narnodel2  ปีที่แล้ว

      I should think about it, but I have other priorities for now... but thanks for asking !

  • @Lurphiralyngdoh
    @Lurphiralyngdoh 4 ปีที่แล้ว +1

    Creativity at its best.. Hats off guys

  • @thetomster7625
    @thetomster7625 4 ปีที่แล้ว +1

    beautiful

  • @MasterBharatBhushanSaikia
    @MasterBharatBhushanSaikia 4 ปีที่แล้ว

    Bobli

  •  ปีที่แล้ว

    aria math vibes

  • @Olafleflibustier
    @Olafleflibustier 4 ปีที่แล้ว +1

    wow ! really amazing work !

  • @darksentinel082
    @darksentinel082 4 ปีที่แล้ว +1

    if i had any woodworking skill i'd make one in a heartbeat.

  • @budimarto4973
    @budimarto4973 4 หลายเดือนก่อน

    I want to make this, may I have the notes for a standard tongue drum?

    • @narnodel2
      @narnodel2  4 หลายเดือนก่อน

      There is no "standard" tongue drum, you can choose the notes you want ! Or use the same notes as me.

  • @rebeccaelliott4261
    @rebeccaelliott4261 4 ปีที่แล้ว +2

    Awesome! I’m going to make one for my little son 😄

  • @benhoughtonmusic
    @benhoughtonmusic 4 ปีที่แล้ว +4

    great sound!!

  • @agustianelvinrizano3883
    @agustianelvinrizano3883 4 ปีที่แล้ว

    So natural

  • @mucharanga2091
    @mucharanga2091 4 ปีที่แล้ว +1

    amazing work!

  • @qqartq
    @qqartq 4 ปีที่แล้ว +2

    incredible sound

  • @siemawiesiu6487
    @siemawiesiu6487 4 ปีที่แล้ว +4

    "60$ with basic tools"
    *10 seconds later*
    "I use very high-end table saw"

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว +4

      Please look at my high end table saw twice.

    • @filipbronola536
      @filipbronola536 4 ปีที่แล้ว +1

      The high-end table saw is a jigsaw mounted upside down lol, they don't cost a lot of money.

    • @GarethKing1
      @GarethKing1 4 ปีที่แล้ว

      @@narnodel2 I am sorry every 4th commenter doesn't know what tools are common and misunderstands your humour.

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว

      @@GarethKing1 Thank you Gareth ! I agree, I wouldn't have expected so much comments about my tools ! I hoped that I would have to answer questions about wood, dimensions, tuning... but I mostly get reproaches because I have a router and because they don't get the joke with the table saw...

  • @ckorangy
    @ckorangy 5 ปีที่แล้ว +6

    Very inspiring and well shot. Thanks for sharing

  • @carlhammill5774
    @carlhammill5774 4 ปีที่แล้ว

    common tools lol. This is advanced wood craft. Some day want to learn this.

    • @rainerzufall689
      @rainerzufall689 4 ปีที่แล้ว

      No it isn't. It is just basic stuff like he said.

  • @geekworthy7938
    @geekworthy7938 4 ปีที่แล้ว +2

    $60 of materials + $300 (2 days of work) (not to mention $2000 in woodworking equipment) or just buy it?

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว +1

      You forgot : 30 000 $ of food so you can grow enough from your birth to the minimum age to use these tools, 1000 $ to buy the computer to watch the video, 30$ per month to have access to internet to watch the video, plus 150 000 $ to buy the house so you can keep your computer, your internet access and your tools in it. Yes, that is the most expensive tongue drum ever.

  • @angelb.9438
    @angelb.9438 4 ปีที่แล้ว +2

    wow. this is so amazing

  • @Awesumpye25
    @Awesumpye25 4 ปีที่แล้ว

    How do you tune it after time?

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว

      You probably won't have to tune it more than once every ten years. I have done mine two years ago and it is still in tune. I haven't glued the bottom board so it is still possible to access the tongues from below and scrape some wood if necessary.

  • @dingo6101
    @dingo6101 4 ปีที่แล้ว +1

    Impressive and sounds great. Poorly titled video though. This isn't a "How to" - there's no instructions whatsoever. Disappointed but oh well

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว +2

      I give the dimensions, the type of wood, I show every step and describe what I’m doing. Really, what did you expect ?

    • @dingo6101
      @dingo6101 4 ปีที่แล้ว +1

      @@narnodel2 it's not a guide. There's many things throughout that you do not explain. It's just a "how I made this" - It's not something someone can realistically follow. That's what I expect from a "How to make..." 👍

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว +4

      @@dingo6101 If you don't know how to work with wood, you are right, this video won't help, but you won't be able to build a tongue drum even with more explanations. If you have some skills in woodworking, I explain everything you need, the things that aren't explained are obvious for anybody who already has used a router or a jigsaw. There are other videos on tongue drums which explain more about basic woodworking, but their instrument sound terrible. I skipped the basic woodworking part to focus on the tuning, which is the most important part that the other videos skipped. So please spend time watching the other video, use your brain and some patience, you will have everything you need.

  • @stankolodin5586
    @stankolodin5586 4 ปีที่แล้ว

    Did he sell a knidney for that table saw? So high end and not a jig saw.

    • @narnodel2
      @narnodel2  4 ปีที่แล้ว

      See comments below