How to adjust the laser beam path
ฝัง
- เผยแพร่เมื่อ 1 พ.ย. 2016
- 1. Check the first mirror
Requirement: Laser beam should dot to the first mirror center.
Laser power: 30%
repare double-sided adhesive
Tear off two small pieces
Stick them with each other.
Paste to the first mirror, and press the adhesive out of profile with nail.
Laser beam dots to the first mirror. - วิทยาศาสตร์และเทคโนโลยี
I use 3mm clear acrylic with some double sided tape when I do this. You can see the laser pulse mark easily and you get to keep the mirrors clean - bonus...
insert the aluminium foil between paper. smoke makes the dirty mirrors
On the second mirror im only able to focus 3 dots at squares 'not the 4 dot in the lower right edge of the machine
In step #1, what do you do if your pulse is not centered??
buenas tardes donde podria adquirir las lineas guias por donde se desplaza el lapiz gracias
Sorry，we do not speak Spanish and the Google translate couldn't make clear. Can you explain more?
Lo siento, no hablamos español y el traductor de Google no pudo aclarar. ¿Puedes explicarme mas?
On a new machine, is this something that will need to be done when it arrives at my place or is this general maintenance after you have been using it for a while?
Thanks
Dale
The machine will working well when you receive it.
Our Nova laser systems come preset and tested through our quality assurance program. Thunder Laser machines come with a water chiller, air compressor, exhaust fan, tool box with all accessories needed to set up and run.
@@thunderlaser.official Oh thank you, I mailed my check to my guy here in the USA yesterday, I hope to be in possession of my new Thunder by mid April. I believe that is the target date, we are so excited and looking forward to working with yall. I will be doing some videos on our youtube channel with it. I hope it helps others as well. Going to be a really fun and epic year adding this to our leather shop, so excited. Thanks again for all yall do and have a blessed week my friends.
Dale
@@HeartlandMakesAndOutdoors Good job. If you have any question, just contact us freely.
Distance between laser tube and first mirror?
Why at 0:48 we can see before first mirror some think seems be another mirror? and black square near to this thing? Its for what? Im newbie and I want to educate something :) Please answer if anyone know.
Bundle mirror. Compensation of Beam Divergence and Optical Inhomogeneity in a CO2 Bundle with Phase Conjugating Mirror
@@thunderlaser.official Thanks a lot for fast answer. I must learn a lot :)