I just bought a 2022 PCX 150 and am looking to add a box already. It looks like this Honda one is well designed to match up to the bike. I also like how the lid line angles down with the angle of the bodywork.
@@MacrossGarage I ordered a SHAD SH33 last night. I liked the looks as well as added the color cap to match the bike and it was on sale through them. Now I’m debating between Givi, Puig, and National Cycle windshields…
Looks great! Exactly what I was looking for! Much prefer a cleaner looking luggage rack than the Givi specific one. Thanks for this video! Going to order for my NEW 2020 PCX 150 now!
Newer ones are also different. I just brought home a 2020 and it doesn't have the pop rivets on the rear center cover. But it looks gorgeous. I'm looking forward to adding a box to mine.
@@MacrossGarage I hear the same mount fits bikes through 2020, so I think it's the same rack. I saw another video that shows the cover held on by a screw from underneath. I have to remove two screws and lift off the handrail cover to remove it, so it's not too bad. The racks for 2021 and 2022 may be different. The listings make a distinction. I've already ordered a windshield. The roads are pretty fast here, and the wind is uncomfortable past 40 mph.
I have the 2013 honda pcx 150 it takes a totally different bracket you have to take the plastic faring behind the seat off and drill 4 7/8 ths holes through the plastic faring so you can screw the bracket to the scooter it's not that hard there are videos on utube showing how.
I have the links to Amazon on my description. You can try that. Not sure if the PH version has the same exact part. I would check the part number with a local dealer or the PH Honda website.
Yes there is one i bought mine from the HONDA DEALER where I bought mine pcx. My dealer wants $ 165.00 to mount this box all it takes is four screws . I dont thinks so . Thanks for this video so simple to install it . Michael
Dear friends PCX,I dont now how is it for model PCX 2020(made in Italy)03-11 months. Rear pices is only on clip clap,Without screw and others equipments..???Very Thanks for comments:-)
I just bought a 2022 PCX 150 and am looking to add a box already. It looks like this Honda one is well designed to match up to the bike. I also like how the lid line angles down with the angle of the bodywork.
Can’t go wrong with the Honda box. It mounts out cleanly. The taller windshield is a must as well.
@@MacrossGarage I ordered a SHAD SH33 last night. I liked the looks as well as added the color cap to match the bike and it was on sale through them. Now I’m debating between Givi, Puig, and National Cycle windshields…
I’ve been looking for tutorials on how to do this. Thanks for showing me!
Looks great! Exactly what I was looking for! Much prefer a cleaner looking luggage rack than the Givi specific one. Thanks for this video! Going to order for my NEW 2020 PCX 150 now!
You are welcome, glad it helped you out.
Same here
I just got a 2020 pcx 125 with a top case and I wondered if it could be easily removed. Found your video and now I know! Cool thing!! 😀
Glad to help. Not sure where the cut off model is but I know the rear box mount. changed a little on the newer ones.
Newer ones are also different. I just brought home a 2020 and it doesn't have the pop rivets on the rear center cover.
But it looks gorgeous. I'm looking forward to adding a box to mine.
are they different only in appearance? Is it basically the same mount?
@@MacrossGarage
I hear the same mount fits bikes through 2020, so I think it's the same rack.
I saw another video that shows the cover held on by a screw from underneath. I have to remove two screws and lift off the handrail cover to remove it, so it's not too bad.
The racks for 2021 and 2022 may be different. The listings make a distinction.
I've already ordered a windshield. The roads are pretty fast here, and the wind is uncomfortable past 40 mph.
will it fit a 2021???? thanks for your time
I check the part# for the 2018 mine and the 2021 and they seem to be the same. I would ask your local dealer to make sure.
I have the 2013 honda pcx 150 it takes a totally different bracket you have to take the plastic faring behind the seat off and drill 4 7/8 ths holes through the plastic faring so you can screw the bracket to the scooter it's not that hard there are videos on utube showing how.
Thank you for the info.
Is that specific mount available in PH? Or can I order abroad?
I have the links to Amazon on my description. You can try that. Not sure if the PH version has the same exact part. I would check the part number with a local dealer or the PH Honda website.
@@MacrossGarage thanks a lot, keep me posted
😎👍👍 Mine is on order for my 2019 pcx and now I am looking for the Oem Taller Tinted Windshield,any ideal where i can find one?
Never seen a tinted oem windshield, please share a link. I got a Givi tall windshield that i use in colder weather.
Yes there is one i bought mine from the HONDA DEALER where I bought mine pcx. My dealer wants $ 165.00 to mount this box all it takes is four screws . I dont thinks so . Thanks for this video so simple to install it .
Michael
Gracias por el tutorial!
You are welcome
Dear friends PCX,I dont now how is it for model PCX 2020(made in Italy)03-11 months. Rear pices is only on clip clap,Without screw and others equipments..???Very Thanks for comments:-)
2020 might be different.
Code Numbers please
Part numbers are in the description.
Rear Carrier/Trunk Mount Kit PART#: 08L71-K35-J01
amzn.to/30HABki
Rear Trunk PART#: 08L77-MGS-A51ZA
amzn.to/3vlWP9M
1 Key Inner Cylinder PART#: 08M71-KZL-841
amzn.to/3vokk22