Not the best video, but hey it's something! These parts are pretty heavy. Please understand that I did connect the long arm to the chassis using the wrong linchpin. I noticed and corrected this issue before using.
I just replied to Kilog; "I was digging all day yesterday from 9am - 6:30pm and only made it 45 feet. I found out my property is that four letter word, "CLAY". ugh!!!" It's a realy PITA!
Very nice !! If Your property including lots of hard clay.. I think You have to make longer bucket theet.. They helps a lot because this backhoe have power..
So you suggest I get some metal and just weld onto the current teeth? I think you should make a video to show me how :) thank you so much for your feedback kind sir
I think I found a solution to allow the clay to release easier: www.tractorbynet.com/forums/files/customization/292071d1354981762-solution-clay-packed-twelve-12-a-selfcleaningbackhoebucket-pdf
Hello solardrew. I've been looking at different towable backhoes. How are you liking the Jansen after using it a while? I like the 2 joystick controls. Do you feel like you are leaning forward to use them ? Thanks in advance.
SolarDrew just got it today. It's a stationary thumb so no extra cylinder. I wanted it for limbs etc not much to it so we'll see how it works out. Thanks for the video. Went thru the same process!
Stan Roberts no problem my friend! I'm glad the video helped you. I'd love to see what the thumb looks like. Can you make a video or send me a picture of it?
SolarDrew can't make a video, but I can text you a picture of it. If you would rather there is a picture of one on janson.com it is very simple and I should have just welded up one.
Possum Productions yes! Thank you kindly for your comment. I learned but I continue to forget ! Will try to remember in the future. Thanks for watching!
@@drewbaden8645 Thanks for the reply Drew! I know I am prejudiced, being a photographer and all... But I watch these videos on a 9 ft. wide screen and the little vertical videos are just.... wellll.... aggravating, ya know?!? LOL Otherwise, decent video and THANK YOU for posting it! You would have had MUCH better detail if it was sideways... I am seriously looking at their MB-1500 and especially their MB-2000 with the Yanmar diesel engine. Having a small farmlet and always digging holes and pushing dirt around, I would LOVE to have one of their mini's! We prefer diesel whenever possible. We have given up on gasoline for farm equipment, anything that uses gas, we converted over to propane and haven't looked back! For small engines, the conversion is rather simple and you never EVER have to worry about a gummed up carburetor again! Our generator sits in the barn until the next hurricane - starts right up on the first or second crank after sitting for as much as TWO YEARS!
For who need to know wheel bearing kit part number for Jansen 300 B is H4-C-PB-B from Martin Wheel $21.90 Jansen sell ONE bearing without race $34.?? ! Three weeks after purchasing towable from Jansen my right wheel froze up once pulled discovered bearings was never greased!
William Brockman jr great info. Sorry to hear your situation. I’ve heard this before about the bearings. I immediately put on some new DOT worthy wheels from Walmart but the singles bent and therefore cause premature wear on the tires while towing :(
@@SolarDrew Really glad the info was of use; have no problem with companies making a profit but to deliberately omit greasing wheel bearings thus causing them to fail in order to charge outrageous prices should be a crime! In my opinion!
just took delivery of mine, saying its heavy is an understatement! great video. gives me an idea of what I am in store for!
Edwin Acevedo excellent my friend! Be prepared for those axels to bend after some use. It's a strong little mighty machine. No regrets here.
Just put mine together the other day . Fun machine with a learning curve.
@@SolarDrew fiatı nedir dostum bu makinenin
They bent pretty quick
@@SolarDrew how did u fix them
Nice job there brother ! Looks real good behind the truck,cant wait to see U dig something.
I was digging all day yesterday from 9am - 6:30pm and only made it 45 feet. I found out my property is that four letter word, "CLAY". ugh!!!
Real nice. Ready to see it work.
I just replied to Kilog; "I was digging all day yesterday from 9am - 6:30pm and only made it 45 feet. I found out my property is that four letter word, "CLAY". ugh!!!" It's a realy PITA!
Very nice !!
If Your property including lots of hard clay.. I think You have to make longer bucket theet.. They helps a lot because this backhoe have power..
So you suggest I get some metal and just weld onto the current teeth? I think you should make a video to show me how :) thank you so much for your feedback kind sir
Also some of the problem is that the clay will not fall out no matter how violent I drop the bucket. I need to get it out with a shovel.
Do You have wider bucket, that what have three teeth.. I think that narrow bucket what comes with backhoe can make that.. It is just too thin...
It is 2 teeth. It's only 9 inches/22 cm/228 mm wide. Do you think a wider bucket would help?
I think I found a solution to allow the clay to release easier: www.tractorbynet.com/forums/files/customization/292071d1354981762-solution-clay-packed-twelve-12-a-selfcleaningbackhoebucket-pdf
Hello solardrew. I've been looking at different towable backhoes. How are you liking the Jansen after using it a while? I like the 2 joystick controls. Do you feel like you are leaning forward to use them ? Thanks in advance.
Merci nice vidéo
Mig411 Mig411 thank you it was easy to assemble
Did you get the thumb with yours?
I figured it out no I didn't get a thumb, did you? I think you'd need an additional hydraulic control for a thumb
SolarDrew just got it today. It's a stationary thumb so no extra cylinder. I wanted it for limbs etc not much to it so we'll see how it works out. Thanks for the video. Went thru the same process!
Stan Roberts no problem my friend! I'm glad the video helped you. I'd love to see what the thumb looks like. Can you make a video or send me a picture of it?
SolarDrew can't make a video, but I can text you a picture of it. If you would rather there is a picture of one on janson.com it is very simple and I should have just welded up one.
Please Please Please turn your phone sideways! Vertical videos are like looking through a keyhole....
Possum Productions yes! Thank you kindly for your comment. I learned but I continue to forget ! Will try to remember in the future. Thanks for watching!
@@drewbaden8645 Thanks for the reply Drew! I know I am prejudiced, being a photographer and all... But I watch these videos on a 9 ft. wide screen and the little vertical videos are just.... wellll.... aggravating, ya know?!? LOL Otherwise, decent video and THANK YOU for posting it! You would have had MUCH better detail if it was sideways...
I am seriously looking at their MB-1500 and especially their MB-2000 with the Yanmar diesel engine. Having a small farmlet and always digging holes and pushing dirt around, I would LOVE to have one of their mini's! We prefer diesel whenever possible. We have given up on gasoline for farm equipment, anything that uses gas, we converted over to propane and haven't looked back! For small engines, the conversion is rather simple and you never EVER have to worry about a gummed up carburetor again! Our generator sits in the barn until the next hurricane - starts right up on the first or second crank after sitting for as much as TWO YEARS!
For who need to know wheel bearing kit part number for Jansen 300 B is H4-C-PB-B from Martin Wheel $21.90 Jansen sell ONE bearing without race $34.?? ! Three weeks after purchasing towable from Jansen my right wheel froze up once pulled discovered bearings was never greased!
William Brockman jr great info. Sorry to hear your situation. I’ve heard this before about the bearings. I immediately put on some new DOT worthy wheels from Walmart but the singles bent and therefore cause premature wear on the tires while towing :(
@@SolarDrew Really glad the info was of use; have no problem with companies making a profit but to deliberately omit greasing wheel bearings thus causing them to fail in order to charge outrageous prices should be a crime! In my opinion!
William Brockman jr right on brother!! I agree 100%
Can you tell me anything specific about your tires? They appear to be aftermarket “road tires” and not the small turf tires in all the on-line videos.
Widescreen bro, we don't really care about all that pavement. We want to see the new toy
So sorry my friend! I need to start using a camera instead of my phone.
SolarDrew Nah just turn your phone sideways. My phone is higher quality than any cam I got. Just gotta remember to turn it. You're not the only one...
Awesome tip brother! Thank you kindly!