HSP Flying Fish 94123 RWD conversion(stage-1, center servo &motor)
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- This is HSP 94123 RWD conversion video with 3d printed parts.
In this stage-1, there are two types according to the motor position. (Stock or center position)
When printing a part, the loading direction on the bed is also very important, so please keep that in mind.
I'll tell you the various parts you need and how to assemble it in detail.
HSP 94123 RWD conversion kit link :
www.cgtrader.c...
3dexport.com/3...
Necessary parts(필요 기자재)
M3 countersunk bolt(접시머리나사)
6mm-2pc, 8mm-10pcs, 10mm-20pcs, 12mm-2pcs
M3 nut - 42pcs
M3 set screw(무두볼트)
4mm-2pcs
M3 socket head bolt(렌치볼트)
6mm-2pcs,12mm-8pcs,15mm-4pcs,18mm-15pcs,20mm-2pcs,22mm-2pcs,40mm-4pcs,
15mm magnet(자석)-8pcs
www.aliexpress...
Length-adjustable universal joint(길이조절식 유니버설 조인트)
www.aliexpress...
Necessary tools(필요 공구)
M3 Hex wrench
Drill - 3.0mm
Plus driver
File, knife, saw....etc.
3D 프린트 부품을 이용한 HSP 94123 RWD 컨버전 영상입니다.
이번 스테이지-1 에서는 2가지 모터의 포지션에 따라 타입이 있습니다.(스톡 or 센터 포지션)
부품을 프린트할 때 베드에 로딩하는 방향도 매우 중요하니 꼭 참고하시길 바랍니다.
필요한 각종 기자재와 디테일한 조립방법이 기록되었습니다.
Check out Tamiya TT02 RWD conversion with 3d printer : th-cam.com/video/QUsKKTEY4Us/w-d-xo.html
Good news for many HSP user!!👍
Thank you.🤭
Hello how you make or where you buy the thing is the back of the rc car the extension in back 18:53
Saya sudah melakukan pembayara
So, what type of lipo battery did you use with center motor mount?
I am very sorry for the late reply. I was very busy with the garage construction work. 2s 4500mah type. Case was 3d printed.☺
Can it work with plastic chassis? Thanks
Of course it is possible. However, the interfering area must be cut. And if you are going to convert the interior version in the future, I recommend purchasing an aluminum chassis for the future. It's very cheap, so it's not bad to buy.
anh lam xe co cầu rock choi anh
BRO CAN YOU DROP THE FILES
I am sorry for the late reply. I can support 3d files online only.😂
Saya sudah membeli kit RWD, kapan di kirim file nya
how many mm for the ball end?

Hi Zeus! I've bought the kit and I wonder how can I choose the servo mount size? Could you please specify the size (in mm) of the "low", "medium" and "standard" servo height?
Thanks for your purchase. low:26.5±1mm, medium:36±1mm, standard:40±1mm.
Hi where I can order this
6mm-2pc, 8mm-10pcs, 10mm-20pcs, 12mm-2pcs
M3 nut - 42pcs
M3 set screw(무두볼트)
4mm-2pcs
M3 socket head bolt(렌치볼트)
6mm-2pcs,12mm-8pcs,15mm-4pcs,18mm-15pcs,20mm-2pcs,22mm-2pcs,40mm-4pcs,
They are bolts and nuts of international standards, so they are readily available at local bolt markets. Or you can easily purchase it by searching on AliExpress. Thank you.
@@zeusgarage4368 Thanks I will start my car tomorrow 💪
Held! how can I contact you, or where can I purchase and download stl print files?
I am sorry for the late reply. Download site is above.😂
Hi, I bought a conversion and have questions. what is the difference between some duplicate files with a signature HISP? you need at least a written description of the files to do
'HISP' stands for high ratio gear speed. That is, mount parts that allow the motor to be mounted further down so that a smaller pinion gear can be used.
Was confused aswell thank you for the info!
I just removed the front diff and centre drive shaft and modified my steering linkage and rid of the centre brace plate as I already have aluminium chassis which is stiff already .
That is the simplest and cheap way to make it rear wheel drive.oh I made a new motor mount so that the motor is sitting dead centre high above the spur gear.
Stock motor position audio was very odd. Kinda scared me because the video went so far without any talking
I am sorry for the late reply. I was very busy with the garage construction work. There is no difference in drift performance of the stock motor position. However, you cannot install additional parts such as the interior🙂.
your videos are so detailed, not only great design, but some great editing too
Thank you. 🤗
얼른 알씨회사 만드셔야겠어요👍👍
하하, 감사합니다.🤗🤭🤭
I've watched this video so many times! and I'm thinking of buying hsp flying fish too.
The HSP Flying Fhis is very good value for money and has a lot of potential when converting to RWD. It's a very good choice.
@@zeusgarage4368 I bought one but,
I tried to design my own front parts, everything works well except the servo. It wasn't smooth and how do I fix this?
@@шатазн Check for interference. And use a servo with good torque and speed. If the problem is not resolved, please send a photo or video by e-mail. Thank you.
@@zeusgarage4368 alright thanks
@@zeusgarage4368 but Zeus the thing is the servo slips really bad, it doesn't hold no matter how hard I tighten the screw it nut
great job !! my request make short lipo version for mid motor.. support buy
Thanks al lot. Hope you enjoy drifting.☺🤭🤗
Can I use the stock chassis and if so can I build just the front suspension or do I have to modify the back as well?
I am very sorry for the late reply. I was very busy with the garage construction work. Stock chassis is available, but requires modification. The price of the metal chassis is cheap, so it is recommended to purchase it. There is no problem in drifting even if the rear wheel part is not modified. However, you cannot install additional parts such as the interior🙂.
Awesome, thank you.
Genius design work, sir. Loved watching that, it was awesome! 🧠💯🔥🔥🔥
Thanks a lot.🤭☺🤗
혹시 출력하려면 프림터 기종을 뭘로 해야 튼튼하게 잘뽑을수있을까요??혹시 출력물로 따로 판매는 안하시나요?
답변이 늦어서 죄송합니다. 제가 사용하고 있는 사파이어 플러스를 추천드립니다. 그리고 직접 판매는 어려울 것 같습니다.😂
What parts in the kit do I need to print multiple of?? please an Thank you
I am very sorry for the late reply. I was very busy with the garage construction work. As soon as possible, I will edit the parts list and the number of prints and upload them above.☺
what gyro can i use on a stock flying fish under $25
I am very sorry for the late reply. I was very busy with the garage construction work. I recommend Onisiki gyro. But cost is 36$.😂
Amazing!
Amigo quiero para Colombia
What is the product price for shipping to Indonesia?
I am sorry for the late reply. I can support 3d files online only.😂
Hello Zeus! Just bought the kit! could you please send me the stl of the chassis plate also?
Thanks. I sent files. I'm busy with finishing the interior kit these days. Please look forward to it as it will be completed and uploaded soon.😊
@@zeusgarage4368 Thanks! Best regards!
Can a old associated TC3 converted to rwd drift?
I am very sorry for the late reply. I was very busy with the garage construction work. It's difficult to answer because I don't have a TC3. But whatever it is, it will be possible.
👏🚀🚀
Cool I just now bought the kit.
Need some wheel designs please
Thanks for your purchase.😊
wheels design link :
th-cam.com/video/XoE1A_zNJtc/w-d-xo.html
th-cam.com/video/wujFo3OtCUQ/w-d-xo.html
Just a quick question
What electronics do you use for your rwd conversions
I would like to upgrade my servo and get a good gyro
Hi Zeus! What plastic must be used?
I am sorry for the late reply. I recommend Esun filament. I'ts very strong and ditailed.🙂
Great!. It looks very smart. 👍👏👍
Thanks a lot.☺
Awesome kit!.🤭 And I have a question, where did you buy the wheels?
Thank you. I designed wheel and made by 3d print.🙂
@@zeusgarage4368 Really? It doesn't look like a 3D printed. Are you planning on uploading wheels too?
@@naancar3956 Yes. I plan to upload it after a few updates. Thank you.🙂
Your the best
Thank you.🤗
How I can buy it ?
HSP 94123 RWD conversion kit link :
www.cgtrader.com/3d-print-models/hobby-diy/automotive/hsp-94123-flying-fish-rwd-conversion-kit
3dexport.com/3dmodel-hsp-94123-flying-fish-rwd-conversion-kit-399959.htm
If you can't pay at above site, leave a message on my facebook
What if I'm using the stock chasis can I just make the front suspension or do I need to modify the back part of the car
Is it possible to use small pinion gears under 19t in center motor position?
Yes. In that case, low motor position mount parts are available.🤗
Hey Zeus, I purchased the kit from CGT. Looks good. Could you please provide a parts list, detailing how many of each part are to be printed, and also the alternative parts?
I am very sorry for the late reply. I was very busy with the garage construction work. As soon as possible, I will edit the parts list and the number of prints and upload them above.😂