Hi .. Please i need help...I used Jagannatha Hora for a long time, but I had to reinstall windows, so I reinstalled the software. From that moment the software doesn't show me the correct chart (my chart).. The data is entered correctly and despite that it shows me a completely different horoscope..I have screenshots of old data, I compared them to see if I made a mistake somewhere, but no..I don't understand at all how I can have a different chart when I haven't changed the data. Maybe some settings do it that I don't know about?..Do you know where the problem could be? thank you so much for your help!
Hello, thanks for watching. The retrogrades planets are simply marked by parenthesis in the program for ex: (Me). This is done automatically without you needing to perform any action.
Hi can you explain on how to setup the following in jhora software Learning Aids - List of a planets in "marana karaka sthana" in a chart and the houses occupied and owned by them is given at a mouse click - Permanent, temporary and compound relationships of planets can be displayed within a chart using an intuitive color code - Pachakadi relationships of planets and signs can be analyzed and listed out for a given chart - Own signs, exaltation signs, debilitation signs and moolatrikonas of planets can be highlighted to aid beginners - Graha drishti and rasi drishti of planets can highlighted to aid beginners - Argala and virodha argala can highlighted to aid beginners
Is there a way to display lagna, navamansh and bhava chalit kundali by default on JHora? That would be really useful, but I couldn't find a way to do it. I get only lagna and navamansha by default and I can change either of them to bhava chalit manually. Also, packed chart mode doesn't get enabled even if I connect bigger display.
Vasanta Das, I love watching your Jagannatha Hora tutorials. Have you experienced this before?: I have had the program for a few years. Suddenly the Rasi Chart is displaying differently, even though the Data for my Rasi chart has been entered correctly!! (Original Lagna: Aires, now chart claims Virgo!) Uber confusing… I have tried re-entering birth info, but to no avail. I question all my charts now. Can you kindly advise me as to HOW to remedy this dilemma? Thanking you in advance, Jai Jai Ram!
Hi Revati, kindly accept my pranam, Check the ayanamsa. Also check the method of calculation. Sometimes when you reinstall the program or get a new version it comes with a different ayanamsa than Lahiri, or it comes using calculations based on Surya Siddhanta. You want to make sure the ayanamsa is Lahiri and method of calculation is Modern. Also check in the input of day time that calculations are based on gregorian calendar next to day of birth. If you want to double check the validity of a chart there is a program called jyotishD for the iphone, or cosmic insights also works well. Hope this helps you. Its happened to me a couple of the times, its always the for some reason the ayanamsa is different :)
Hello Vasanta Das, I thought the problem was the ayanamsa…but I had a problem finding how to check it pulling up that menu on my trackpad. All well again now.☺️ But Pranams to YOU for your quick response!! Thank you! 💫Hari Bol
i have tried to use JH for years and cant find out why my lagna is leo instead of early virgo. I know this is siderial so no issue there. I have equal house system checked and both d1 and bhava chalita have leo lagna. i checked daylight savings time was active in germany so that is not the issue. I really need help thank you
Thank you for this tutorial, it is very usefull. But i have an issue with a chart and basic info. I have checked my natal chart in other software and i know my planetary placements. But in Jaganatha Hora there is a problem with Moon position in a chart. Basic info shows correct data, but in chart my Moon in placed in other house. For example, it should be placed in 5th house, but it shows the placement in 4th house. Does anyone know why is that so? Thank you for your help. Sending love.
I have checked that, Jagannath Hora Software is very inaccurate, hence can not be used for casting Horoscope. Concerned authority is requested to check and correct the software. For the given date, the Day is not shown correctly. The Longitude and Latitude of places (India) shown incorrectly. Navamsa, Dasamsa, etc varies. - Arun Ganguly, Kolkata , India.
Good software but have some error in nadi amsa. The 107th fixed sign (44th in moveable) is Snigdhaa. But it shows Kumari. Same in moveable 107th is kolika not Kumari amsa
Hello you might want to check that the Lahiri ayanamsa is there, and that modern calculations are used instead of Surya Siddhanta. You find this under preferences> related to calculations> first and second tab. That will show you a difference.
Thank you so much for this tutorial... I owe you.. you solved all my problems related to setting of j hora
Perfect video to start using the software
Thanks a lot sir
This is very helpful video. Thank you so much teacher, I was searching around two weeks to find this amazing video
Hi .. Please i need help...I used Jagannatha Hora for a long time, but I had to reinstall windows, so I reinstalled the software. From that moment the software doesn't show me the correct chart (my chart).. The data is entered correctly and despite that it shows me a completely different horoscope..I have screenshots of old data, I compared them to see if I made a mistake somewhere, but no..I don't understand at all how I can have a different chart when I haven't changed the data. Maybe some settings do it that I don't know about?..Do you know where the problem could be? thank you so much for your help!
Thank you so much sir for these settings
really helped me
I love your videos on Jyotish related to how to use Jagannatha Hora! Please make more :)
Sir, how do you input BC dates, e.g. some date in 2000BC?
Sir,would you kindly do video on reset the PERFERENCES
can you please share your settings in this software, i am getting wrong dasha's and other values please
Lunar calendar option setting Amanta and Purnanta, Jhora repeatedly fails to show Poornanta month correctly, is there any other way of setting option
5:39 how do i display the Rasi chart on top, and the d-1 (asc) chart on the bottom?
I can not see the degrees of planets in D9 chart. Please anybody know how to show degrees?
Thank you❤
Thank you, wonderful tutorial. How to set up the retrograde marker please, I am following your video and it's not showing on my system..thank you
Hello, thanks for watching. The retrogrades planets are simply marked by parenthesis in the program for ex: (Me). This is done automatically without you needing to perform any action.
Can you see nakshatras for d10?
This was very helpful, thank you so much!
Thank You! This is very helpful :)
Oh man so much to learn! But you explain it very understandable!
What is Trd means which is appearing in divisional charts
Sir, this Software has no predictions ------- what use it is then ?
I have submitted my comments on the accuracy of the software, but reply awaited.
how did u install it in mac I wasn't it only compatible for windows
Hi can you explain on how to setup the following in jhora software
Learning Aids
- List of a planets in "marana karaka sthana" in a chart and the houses occupied and owned by them is given at a mouse click
- Permanent, temporary and compound relationships of planets can be displayed within a chart using an intuitive color code
- Pachakadi relationships of planets and signs can be analyzed and listed out for a given chart
- Own signs, exaltation signs, debilitation signs and moolatrikonas of planets can be highlighted to aid beginners
- Graha drishti and rasi drishti of planets can highlighted to aid beginners
- Argala and virodha argala can highlighted to aid beginners
Is there a way to display lagna, navamansh and bhava chalit kundali by default on JHora? That would be really useful, but I couldn't find a way to do it. I get only lagna and navamansha by default and I can change either of them to bhava chalit manually. Also, packed chart mode doesn't get enabled even if I connect bigger display.
Thank you Guruji : Is there any option to see Prastaraka Verga of each planet & Asc.
thank you
Vasanta Das,
I love watching your Jagannatha Hora tutorials. Have you experienced this before?:
I have had the program for a few years. Suddenly the Rasi Chart is displaying differently, even though the Data for my Rasi chart has been entered correctly!!
(Original Lagna: Aires, now chart claims Virgo!) Uber confusing…
I have tried re-entering birth info, but to no avail. I question all my charts now.
Can you kindly advise me as to HOW to remedy this dilemma? Thanking you in advance, Jai Jai Ram!
Hi Revati, kindly accept my pranam, Check the ayanamsa. Also check the method of calculation. Sometimes when you reinstall the program or get a new version it comes with a different ayanamsa than Lahiri, or it comes using calculations based on Surya Siddhanta. You want to make sure the ayanamsa is Lahiri and method of calculation is Modern. Also check in the input of day time that calculations are based on gregorian calendar next to day of birth. If you want to double check the validity of a chart there is a program called jyotishD for the iphone, or cosmic insights also works well. Hope this helps you. Its happened to me a couple of the times, its always the for some reason the ayanamsa is different :)
Hello Vasanta Das,
I thought the problem was the ayanamsa…but I had a problem finding how to check it pulling up that menu on my trackpad. All well again now.☺️
But Pranams to YOU for your quick response!!
Thank you! 💫Hari Bol
Hey! How did you install this on a Mac=? It says that its only for Win
Download and Install Jagannatha Hora on a Mac 2020 Tutorial | Vedic Astrology Software | Vasanta Das
th-cam.com/video/Ol0iyxNmEtc/w-d-xo.html
How do you have 6 horoscope charts on one screen? I have only two? Is there an option to choose a number of charts to be displayed?
Thanks sir
Sir how take screenshot on desktop
Nice explanation
THANX SIR
hey thank you for this video ! Could you please tell me if I can see the nakshatra and degree of the planets in D 9 chart ?
Hello Puranidhi, in Jagannatha Hora you can't see this info unfortunately.
Sir, can u pl help me to set two different i.e. D-1 & D-9 charts, I m getting both chart are same division
Is there any other software online that supports pushya paksha ayanamsa? 0because I'm unable to download jhora on my iPhone or android
i have tried to use JH for years and cant find out why my lagna is leo instead of early virgo. I know this is siderial so no issue there. I have equal house system checked and both d1 and bhava chalita have leo lagna. i checked daylight savings time was active in germany so that is not the issue. I really need help thank you
Very useful
Thanks a lot
HI, How do I add additional KP chart along with lagan chart on J Hora?
I am unable to see the details inside the chart. The charts are blank. Can someone help please??
Thank you for this tutorial, it is very usefull. But i have an issue
with a chart and basic info. I have checked my natal chart in other
software and i know my planetary placements. But in Jaganatha Hora there
is a problem with Moon position in a chart. Basic info shows correct
data, but in chart my Moon in placed in other house. For example, it
should be placed in 5th house, but it shows the placement in 4th house.
Does anyone know why is that so? Thank you for your help. Sending love.
Thank you! It was helpful!
thank you sir love you
I have checked that, Jagannath Hora Software is very inaccurate, hence can not be used for casting Horoscope. Concerned authority is requested to check and correct the software. For the given date, the Day is not shown correctly. The Longitude and Latitude of places (India) shown incorrectly. Navamsa, Dasamsa, etc varies. - Arun Ganguly, Kolkata , India.
Very Useful. Thanks!
Hello there, on my chart I have AK and AM together??? Why is that?
Good software but have some error in nadi amsa. The 107th fixed sign (44th in moveable) is Snigdhaa. But it shows Kumari.
Same in moveable 107th is kolika not Kumari amsa
sir can change the language to tamil language
yes! you go to preferences> related to display> chart style and language :)
i am from Vilnius Lithuania :D
Very useful!
thanks a lot sir....
Thanx
It shows date of previous day
Suppose I set 11 as date it shows everything of 10
How to solve it
Thank you !
मोबाइल हेतू हिन्दी मे उत्तर भारत की कुंडली सहित उप्लब्ध हो तो कृपया लिंक भेजें।
I entered my birth data, but it shows wrong birth nakshatra. I don't know why. What is the correct settings
Hello you might want to check that the Lahiri ayanamsa is there, and that modern calculations are used instead of Surya Siddhanta. You find this under preferences> related to calculations> first and second tab. That will show you a difference.
thank you i was upset about SI style 😂
T h ankyou sir
6:02 min
Sir, can u pl help me to set two different i.e. D-1 & D-9 charts, I m getting both chart are same division