Please Hit The LIKE and SUBSCRIBE BUTTONS as well as the NOTIFICATION BELL. Feel Free to Check out my Amazon Influencer Page and Follow Me on Instagram, Facebook and Twitter. Thanks For Watching. Amazon www.amazon.com/shop/corporalscorner?isVisitor=true&ref=exp_inf_own_pub_corporalscorner Self-reliance Outfitters www.selfrelianceoutfitters.com/collections/shawn-kelly?ref=s9jgxrwlnqv Facebook facebook.com/pages/Corporals-Corner/516423848419768
Shawn, as I look over your older videos from 10 years ago to this one to ones you've recently done. You are HANDS DOWN the hardest working dude on TH-cam and have passed on so much knowledge and skills. I hate seeing TH-cams algorithms affecting you like they do. But just like your integrity and work ethics, you are not a quitter and will adapt and overcome this. Have a great day and be safe out there brother..
Great job, And Thank you for your service. I served in the US Coast Guard and Army national guard for a total of 22 years. We all gave the same Oath to protect this country.
I've been to Pompeii. It was mind blowing. Aside from electricity and the internal combustion engine, and slaves they lived almost exactly like we do. 4 way stops, sidewalks with parking strip, central heating, public toilets, everything.
Ebola Chan yes most cultures had them (like many african or asian societies and even native americans had them), however I do believe most could earn freedom after a certain amount of years and become a roman citizen.
It just doesn't get any better than this. the casting skills, the stove making skills, the cooking skills.....genius..... Thank you very much for sharing ..
If you would like to remove the oxidation / tarnish after a few uses I have a simple recipe that I used to clean up a porthole from the ship I served on in Vietnam. It was 60 years old, and was in very bad condition when I purchased it from the scrappers as the ship was being broken up. THE RECIPE: Measure equal amounts of table salt, flour, and white vinegar (I used 1/2 cup of each) and mix together. The salt and vinegar do the work of removing the oxidation, and the flour makes it into a paste so it will stick to the bronze. If you get the consistency of pancake batter that's what you're after. Add more flour if it's too thin. Add more vinegar if it's too thick. THE INSTRUCTIONS: With a paint brush, dab a coating of the mixture onto the bronze and make sure you coat it thick enough to see the mixture on the surface. After you have the entire surface coated, place the bronze object into a plastic trash bag large enough to easily put the object inside the bag. Twist or close the open end of the bag so it is closed and will not allow the mixture to dry out. Leave it closed up at least overnight up to about 24 hours. When you remove to bronze object from the plastic bag you're going to wash off the mixture with a garden hose. Choose a place that's like a driveway, alley, or sidewalk, but not your yard (unless you want to kill your grass). After washing off the bronze with the garden hose the bronze should be bright with no oxidation or tarnish. Cheap, simple, safe, and effective. Good luck!
Sharing my experience, at home my mother would use salt and tamarind or lime fruit (citric acid) mixture to clean bronze item and after that sunbath for a while for a sparkling bronze display.
You coat Copper (Cuivre, Cu) with Tin (Êtain, Sn). In Spanish it seems Copper, Bronze and Brass are all the same word. (Can frustrate you when you have all three in front of you and you can't distinguish them) In fact, I wonder if bronze was actually discovered when someone dropped a tin-coated copper pan into a furnace.
@@petehoover6616 pretty sure the bronze age was well before people were using tin coated copper pots/pans. It was a good thought though youre right it likely was discovered by acciendent
I suspect copper crucibles may have been used as vessels for smelting metals of lower phase transitions, such as tin. Its notorious adherence would likely have been discovered in this way, if not even before its discoverer had realised tin and copper ores had been mixed at lower temperatures, or perhaps even thinking the copper had been turned into tin in an act of alchemy.
Sheridan Lefanu, it's called greensand -- a mixture of fine sand and bentonite clay. There's another video on this channel where he casts bronze knives, which goes into the process he uses in more detail.
Cool video and great techniques. The ancients were vastly more intelligent (smarter than us in so many ways) than we give them credit. And, as you obviously know...Bacon is the greatest invention of them all!!! Thanks for sharing.
I know this is an old video but I just wanted to say that the method you used to cast that bronze skillet is exactly the same method as Lodge still uses to make their cast iron skillets, etc. They just do it on an industrial scale. The Lodge factory is in South Pittsburg, Tennessee and every year there is a cornbread festival (and competition for best cornbread) right next to the factory in South Pittsburg. I live a couple of hours away and a group of us went one year. For the festival Lodge shuts down the factory for a few days ahead of time to let things cool down and so they can clean then they give free tours during the festival. They showed us frames with sand-cast molds set up in them that were literally almost identical to what you made. Also, I love my cast iron skillets and cast iron is pretty much all I cook with but I have to say that with the color and shine of the metal that cast bronze skillet was really nice looking.
It's called an auger, and hey can be generally picked up at a reputable, large, hardware and tool store, they're just a very large drill bit, but with a handle. He has a video about how to make one from a large bit and fittings
its an impressive innovation on a swedish idea where you split a log into quarters then place them back together(slightly spaced apart) and light the inside on fire.
Truly one of the all time BEST videos on YT. That you did such a fine job casting a bronze "Lodge" fry pan is fantastic! The history of first century Pompeii was in a class by itself, I had no idea that they had that kind of wares. Great job. Great presentation. Thank you!
You could have made the "sprue's" (fill holes) like feet so the removal of the excess bronze off the pan would have been minimal. And it would stand nicely in a campfire.
Great video - thanks for showing the process. Funny thing - the sand molding technique which you pointed out as 'Old World technology' is actually the casting method that is STILL used by the Lodge factory to make their cast iron skillets. Classic example of 'if it ain't broke don't fix it', I suppose.
Amazing. I've never seen a cast bronze skillet before. I'm dying to know: How does it cook compared to cast iron? How does it clean up and wear? Similarities? Differences? Thanks for some great content.
Bronze won't crack like cast iron, but it won't hold and distribute heat as well as it is not as dense. It is still really good at the things that make a cast iron pan useful. Just be careful if you try using it with a lot of acidic foods that will keep in contact with it for extended periods of time. It should clean and wear out similar to cast iron and needs to be properly cared for like cast iron. Definitely thinking about making this and maybe trying to sell it. I am now thinking that making some cast copper bowls would be a possible money maker. I got plenty of copper around and all I need to do is find some tin.
Use the finer green sand, you'll get your stuff much smoother and wont have to work too long to finish it. If you ever make one hit me up, I'll make sure to check it out :D
I thought cast iron and bronze are very similar: density, thermal capacity, conductivity (sometimes). That's why pure copper is probably a better use of the material. The interior needs then maybe a more neutral layer
The bronze probably makes things crispier and tastier because of the greater conductivity of the metal. And, you can probably get rid of the "Not for human consumption" issues by using a hermetic blend that is normally reserved for making jewelry like "Merlin's Brass" but, not sure.
I can't say enough how fantastic it is to see historical context being brought to sites like this. And "recreating the artifacts and using them too??? FANTASTIC Corporal!!! Thank you and looking forward to more.
I think this is a great video, and I love the concept of a brass frying pan, but be careful if you are a DIYer attempting this, you may be tempted to use re purposed materials, and while it could be easy and safe if you know about the type metals you are using, on the other hand, some could be easily fooled into using "leaded bronze" which is a very common alloy of brass used in industry for things like sleeve bearings and other wear components... these components, when worn out, are usually recycled and the untrained person might think they are brass. Be sure of the material you are using so you won't end up with a percentage of lead in your melting pot and then in eventually in your casting.
@@dominikrozman7256 It's the same word in Spanish. Quite dangerous, like the switching of Organic Compound names between English and American. (Parafin is one thing, but in America what the Brits call PARAFINE {Note the "E"} is either Kerosene or Naptha If the word had not been written in Hebrew I'd have blown something up)
Good job on making the mold. I remember doing that in high school 54 years ago. I like your skillet better than my project. I presume that the bronze pan will last forever, so it will be a great thing to pass down.
Excellent work! Now I want to do that with some copper pipe I have laying around. You do need to "season" these pans with high-temp oil though. Flax/bacon not olive Wet cold pan with oil & heat until smoking. allow to cool. wipe chunks. repeat x2 more
Vast majority of basic kitchen utensils haven't changed since antiquity (with the exception of a few which were invented later, like the cheese grater). Ornamentation may be different through the ages and regions, but the primary design is always the same and is determined by one key factor - functionality.
Form generally has to follow function first. Finds like Pompii are primarily why it is thought by some that human civilization is far older than many historians currently agree it to be.
What is modern? Lodge? No. People have been cooking food for tens of thousands of years. The bronze age began 6000 years ago or so. The frying pan is such a basic and obvious cooking tool that it seems likely they have existed for much of that time without too much change. So in a sense, the Pompeii pans *are* modern. In fact, if you compare the 100 year old cast iron pans and skillets that collectors pay ridiculous amounts for to the ones you can buy today at Target (mostly Lodge brand) I'd have to say that our technology today is less advanced than it once was.
In a hundred years the person finding this skillet will be mighty confused...I didn't know Lodge made bronze cookware>>>nice video and the stove is just as impressive..
Your sergeant should remind you about pouring molten metal barefooted. Seems risky to me. I don't even eat breakfast without boots on. But that skillet looks sweet! Good work.
I've been watching your videos for a bit now and learning so much. While I'm always impressed this was especially impressive to me in large part because I'm also a metal worker in my spare time. Wow!
voltare2amstereo - I know this is going to blow your mind, but this is also a think in the U.S., the U.K. and N.Z... I'm sure Russia has a version of it as well.
You wouldn't steal a handbag. You wouldn't steal a car. You wouldn't steal a baby. You wouldn't shoot a policeman. And then steal his helmet. You wouldn't go to the toilet in his helmet. And then send it to the policeman's grieving widow. And then steal it again!
Thank you Corporal that was a great heel stretch to making that frying pan I think you do a great job every time I always give you a thumbs up thank you thank you thank you Sean Kelly
You've obviously got some good experience casting. I liked the log stove too. What was the metals and the ratio to make the bronze? (liked and shared) 👍
Great work. Nice video. Please consider limiting your use of this skillet. Acids produced during cooking lead to higher levels of copper in the food. As an example, nitrates and nitrites that give bacon the pink color and unique taste are easily converted to nitric acid and nitrous acid, respectively. These acids react with the copper in the skillet and copper compounds end up in the food. A very small amount of copper is necessary, but we typically easily get this in the trace amounts required without any supplementation needed. Excess copper disturbs you proper use of zinc. You can look up the variety.of symptoms if concerned. I doubt using this skillet occasionally (couple times a year?) would present much danger to an otherwise health adult. I don't think using it daily or feeding children from this skillet is a good idea. . I am assuming your copper and tin were from sources known to be free of things like lead and arsenic. If you aren't absolutely certain the composition, you should not eat food off these. You might consider tin plating your skillet for additional safety and usability.
I agree with this comment. Acids could cause health issues especially if the copper or tin have residual lead, zinc or other heavy metals (Mercury and cadmium come to mind.) If I had something like this I would tin it with a non toxic grade of silver solder such as ASTM96TS which is considered a food service grade of silver solder (96% tin, 4% silver).
While I don't discount the facts you are presenting, I think it is important to also remember that the people of Pompeii and Rome in general used these on a regular basis, and thrived to create one of history's greatest civilizations. I doubt that this pan will see daily use, and even if it does, there is little dangerin the foods he is cooking here; considering that acids are water soluble and the food is swimming in bacon grease. All things in moderation, I guess I would recommend, including moderation in worry over the health issues.
Not only is copper highly corrosion resistant, copper salts taste disgusting (try tasting a small amount of copper sulphate if you don't believe me!). The food would taste off if significant amounts of copper were getting into it.
Out-STANDING project and a magnificent bronze skillet as a result. I'm always left mystified when I see someone cast - as a scientist I fully understand how it can be done but as someone completely incapable of carrying out such a task it looks like black magic to me! Excellent video.
They would probably say something along the lines of, "Veni, vidi, vici." The quote has be attributed to Julius Caesar and means, "I came, I saw, I conquered."
Keep in mind that the copper in the alloy breaks down vitamin C. This can lead to scurvy if no source of this is supplemented. Most of the cooking wear on ship in the past were off copper.
Pompeii is a vast archaeological site in southern Italy’s Campania region, near the coast of the Bay of Naples. Once a thriving and sophisticated Roman city! They were Romans lol!
A fantastic video. A fabulous frying pan made with ancient means and methods. Thanks Shawn, really good video. I'm sure the food tasted very, very good in that pan. 👍😉
Kelly, I liked the ideas of the past.. Thank U for sharing how to make a skillet from the past.. The movie about Pompeii was great... When the volcano erupted it was a site to see.. The movie was good.. Thank U corporal Kelly for showing us how to make something from the past.. Hope U & your family are doing well & staying safe... Take care & I'll see U on the flip flop...
Sir, I admire your technical skill, but I stand in awe of your deep understanding of the closeness of ancient Roman culture and modern culture. Few Americans, and probably even fewer Europeans have such understanding. And understanding the past is also very relevant for the future, I wish you well. Please spread your thoughts. Kind Regards, Tielo Jongmans
I get those candles in a small cast iron skillet, take the wax and smooth. Then use it for hot skillets dinners camping. So many great ideas from the comments thank you for your service.
I stand corrected on my non-knowlege of bronze Roman frying pans . Very interesting video , casting , rocket stove , which is super practical , and informative history lesson . Haven't heard Willie Pete in forever ! Semper Fi , Devil Dog from a fellow CPL .
I like that little hand drill I want one now lol I can't wait for next summer I'm gonna be more outdoors person so I can teach my son alot that type stuff along with survival skills
OMG! You made a pan! I loved that - really shinny and pretty! I called my hubbs Harry to come and watch. He totally understood what you were doing - I didn't! LOL! That was sooo neat to watch. WOW! Thank you for showing us this. I have my cast iron skillets (I take them camping) I love using them, they are also "seasoned" well.
Please Hit The LIKE and SUBSCRIBE BUTTONS as well as the NOTIFICATION BELL. Feel Free to Check out my Amazon Influencer Page and Follow Me on Instagram, Facebook and Twitter. Thanks For Watching.
Amazon www.amazon.com/shop/corporalscorner?isVisitor=true&ref=exp_inf_own_pub_corporalscorner
Self-reliance Outfitters www.selfrelianceoutfitters.com/collections/shawn-kelly?ref=s9jgxrwlnqv
Facebook facebook.com/pages/Corporals-Corner/516423848419768
Where did u get the bronze?
Is that powered CLAY that is being used for the mold??? Inquiring minds NEED to know~!!
Shawn, as I look over your older videos from 10 years ago to this one to ones you've recently done. You are HANDS DOWN the hardest working dude on TH-cam and have passed on so much knowledge and skills. I hate seeing TH-cams algorithms affecting you like they do. But just like your integrity and work ethics, you are not a quitter and will adapt and overcome this.
Have a great day and be safe out there brother..
ONE PAN TO RULE THEM ALL...
The skillet was cool, but that stove at the end just changed my life
No shee-at right? I loved that!
That stove deserves a video of it's own, right?
Rocket stoves are awesome.
It’s called “Swedish Torch Log”
The skillet was a masterpiece in an of itself, but that tree stump rocket stove litteraly just changed my life for the better. Excellent!
Thank you and thanks for watching
@@recall5811 is there somewhere u can buy this drill bit
Man, this channel’s gotta be one of the most authentic, entertaining and educational i have ever seen. Great job man.
Great job, And Thank you for your service. I served in the US Coast Guard and Army national guard for a total of 22 years. We all gave the same Oath to protect this country.
I've been to Pompeii. It was mind blowing. Aside from electricity and the internal combustion engine, and slaves they lived almost exactly like we do. 4 way stops, sidewalks with parking strip, central heating, public toilets, everything.
Ebola Chan yes most cultures had them (like many african or asian societies and even native americans had them), however I do believe most could earn freedom after a certain amount of years and become a roman citizen.
People haven't changed much either: Cicero already complained that the young were only interested in drinking and partying... :)
It just doesn't get any better than this. the casting skills, the stove making skills, the cooking skills.....genius..... Thank you very much for sharing ..
If you would like to remove the oxidation / tarnish after a few uses I have a simple recipe that I used to clean up a porthole from the ship I served on in Vietnam. It was 60 years old, and was in very bad condition when I purchased it from the scrappers as the ship was being broken up. THE RECIPE: Measure equal amounts of table salt, flour, and white vinegar (I used 1/2 cup of each) and mix together. The salt and vinegar do the work of removing the oxidation, and the flour makes it into a paste so it will stick to the bronze. If you get the consistency of pancake batter that's what you're after. Add more flour if it's too thin. Add more vinegar if it's too thick. THE INSTRUCTIONS: With a paint brush, dab a coating of the mixture onto the bronze and make sure you coat it thick enough to see the mixture on the surface. After you have the entire surface coated, place the bronze object into a plastic trash bag large enough to easily put the object inside the bag. Twist or close the open end of the bag so it is closed and will not allow the mixture to dry out. Leave it closed up at least overnight up to about 24 hours. When you remove to bronze object from the plastic bag you're going to wash off the mixture with a garden hose. Choose a place that's like a driveway, alley, or sidewalk, but not your yard (unless you want to kill your grass). After washing off the bronze with the garden hose the bronze should be bright with no oxidation or tarnish. Cheap, simple, safe, and effective. Good luck!
Sharing my experience, at home my mother would use salt and tamarind or lime fruit (citric acid) mixture to clean bronze item and after that sunbath for a while for a sparkling bronze display.
Actually, he should have coated the pan with tin to prevent oxidation and to make it more safe.
You coat Copper (Cuivre, Cu) with Tin (Êtain, Sn). In Spanish it seems Copper, Bronze and Brass are all the same word. (Can frustrate you when you have all three in front of you and you can't distinguish them) In fact, I wonder if bronze was actually discovered when someone dropped a tin-coated copper pan into a furnace.
@@petehoover6616 pretty sure the bronze age was well before people were using tin coated copper pots/pans. It was a good thought though youre right it likely was discovered by acciendent
I suspect copper crucibles may have been used as vessels for smelting metals of lower phase transitions, such as tin. Its notorious adherence would likely have been discovered in this way, if not even before its discoverer had realised tin and copper ores had been mixed at lower temperatures, or perhaps even thinking the copper had been turned into tin in an act of alchemy.
That pan turned out beautiful!! I love cast iron pans but the beautiful shine from the bronze skillet is just wonderful.
Wow when your Momma sent you out to play in the sandbox you really took off and learned!
Remember my grandma use to make rocket stove out of mesquite stumps and cooked outside. Brings back memories. Great job on the casting.
Eggs and bacon never gets old! What a great video!
A gentleman and a scholar. Great story. And a beautiful skillet. I love old world craftsmanship.
You Sir are brilliant. I really enjoy watching your videos. I've learned so much from you. Thank You for sharing your knowledge and time.
Thank you please share my channel so that it can continue to grow
What's the composition of the sand? How did it set like that?
Sheridan Lefanu, it's called greensand -- a mixture of fine sand and bentonite clay. There's another video on this channel where he casts bronze knives, which goes into the process he uses in more detail.
He is not a Sir, he is a Corporal and works for his living.
Its a little moist in here
Cooking a meal on a skillet you made yourself must be a special kind of satisfaction. :)
2019, and this series of videos still educates and entertains.
Cool video and great techniques. The ancients were vastly more intelligent (smarter than us in so many ways) than we give them credit. And, as you obviously know...Bacon is the greatest invention of them all!!! Thanks for sharing.
i like that rocket stove
i like it too but it seems hard to make, i mean not everyone or every situation has such a hand drill. right?
You can also saw an "X" in the top of a log to make what you call a swedish torch.
☼ Heirloom reviews ☼ check out ecozoom rocket stoves on Google.
just saw slots in the log ....search youtube n find such
I know this is an old video but I just wanted to say that the method you used to cast that bronze skillet is exactly the same method as Lodge still uses to make their cast iron skillets, etc. They just do it on an industrial scale. The Lodge factory is in South Pittsburg, Tennessee and every year there is a cornbread festival (and competition for best cornbread) right next to the factory in South Pittsburg. I live a couple of hours away and a group of us went one year. For the festival Lodge shuts down the factory for a few days ahead of time to let things cool down and so they can clean then they give free tours during the festival. They showed us frames with sand-cast molds set up in them that were literally almost identical to what you made. Also, I love my cast iron skillets and cast iron is pretty much all I cook with but I have to say that with the color and shine of the metal that cast bronze skillet was really nice looking.
Never mind the pan which is properly impressive. You just made a rocket stove out of a tree stump. Mind blown
Yha. Lol. That tripped me out as well. Pretty cool.
What do you call that old school type drill he used to make that, and where do you get one?
It's called an auger, and hey can be generally picked up at a reputable, large, hardware and tool store, they're just a very large drill bit, but with a handle. He has a video about how to make one from a large bit and fittings
its an impressive innovation on a swedish idea where you split a log into quarters then place them back together(slightly spaced apart) and light the inside on fire.
@@festivusmiracle82 if you Google Hand drill, then look through images, you can find the type he was using. Auger drills generally are much bigger.
That was awesome!! Sandcasting a mold then making your very own skillet is outstanding!!
Truly one of the all time BEST videos on YT. That you did such a fine job casting a bronze "Lodge" fry pan is fantastic! The history of first century Pompeii was in a class by itself, I had no idea that they had that kind of wares. Great job. Great presentation. Thank you!
You could have made the "sprue's" (fill holes) like feet so the removal of the excess bronze off the pan would have been minimal. And it would stand nicely in a campfire.
ooo ooo a "spider" pan like from a taste of history
even better use fill holes at skillet handle location
Exactly what I was thinking! Three fill holes and you'd have a spider to cook on.
Outstanding doesn't cut it. That was badass. Well done.
The ruins of Pompeii always intrigued me, but man, bacon!
Outstanding is an understatement.
That had to be so satisfying that there's no words.
Thanks for sharing
I just keep watching this video. It's so beautiful.
Please share it with others, thanks for watching
This is one of the coolest things I've seen made out of bronze.
Great video - thanks for showing the process. Funny thing - the sand molding technique which you pointed out as 'Old World technology' is actually the casting method that is STILL used by the Lodge factory to make their cast iron skillets. Classic example of 'if it ain't broke don't fix it', I suppose.
cool historical find, , and build, love the auger idea , for the rocket stove , easy to pack ,
Amazing. I've never seen a cast bronze skillet before. I'm dying to know: How does it cook compared to cast iron? How does it clean up and wear? Similarities? Differences? Thanks for some great content.
Bronze won't crack like cast iron, but it won't hold and distribute heat as well as it is not as dense. It is still really good at the things that make a cast iron pan useful. Just be careful if you try using it with a lot of acidic foods that will keep in contact with it for extended periods of time. It should clean and wear out similar to cast iron and needs to be properly cared for like cast iron. Definitely thinking about making this and maybe trying to sell it. I am now thinking that making some cast copper bowls would be a possible money maker. I got plenty of copper around and all I need to do is find some tin.
Use the finer green sand, you'll get your stuff much smoother and wont have to work too long to finish it. If you ever make one hit me up, I'll make sure to check it out :D
I thought cast iron and bronze are very similar: density, thermal capacity, conductivity (sometimes). That's why pure copper is probably a better use of the material. The interior needs then maybe a more neutral layer
It should be coated with tin, otherwise might be toxic for humans to use.
The bronze probably makes things crispier and tastier because of the greater conductivity of the metal. And, you can probably get rid of the "Not for human consumption" issues by using a hermetic blend that is normally reserved for making jewelry like "Merlin's Brass" but, not sure.
I can't say enough how fantastic it is to see historical context being brought to sites like this. And "recreating the artifacts and using them too??? FANTASTIC Corporal!!! Thank you and looking forward to more.
I think this is a great video, and I love the concept of a brass frying pan, but be careful if you are a DIYer attempting this, you may be tempted to use re purposed materials, and while it could be easy and safe if you know about the type metals you are using, on the other hand, some could be easily fooled into using "leaded bronze" which is a very common alloy of brass used in industry for things like sleeve bearings and other wear components... these components, when worn out, are usually recycled and the untrained person might think they are brass. Be sure of the material you are using so you won't end up with a percentage of lead in your melting pot and then in eventually in your casting.
tracyguilbeau dude bronze is a different alloy than brass so you have to say bronze instead of brass
@@dominikrozman7256 It's the same word in Spanish. Quite dangerous, like the switching of Organic Compound names between English and American. (Parafin is one thing, but in America what the Brits call PARAFINE {Note the "E"} is either Kerosene or Naptha If the word had not been written in Hebrew I'd have blown something up)
Thank you bro, very cool!
You should have something like this tinned regardless. Raw copper/bronze is not safe to cook on.
@@glenbyrd4448 people went mad from tin poisoning back when they made cans out of tin instead of steel.
Good job on making the mold. I remember doing that in high school 54 years ago. I like your skillet better than my project. I presume that the bronze pan will last forever, so it will be a great thing to pass down.
Excellent work! Now I want to do that with some copper pipe I have laying around.
You do need to "season" these pans with high-temp oil though. Flax/bacon not olive
Wet cold pan with oil & heat until smoking. allow to cool. wipe chunks. repeat x2 more
Sweet. thanks for watching. Please share my channel
Epic series on casting, accessible, educational with no fluff.
Outstanding!
Thank you for a cool winter garage project. It looks like it can be done to keep the 'legs' so I can finally have a "spider" frying pan.
I can't believe it even had the pour lip! That is crazy how identical it is to the modern pan.
Vast majority of basic kitchen utensils haven't changed since antiquity (with the exception of a few which were invented later, like the cheese grater). Ornamentation may be different through the ages and regions, but the primary design is always the same and is determined by one key factor - functionality.
+Roger Rarebit
he was talking about the museum exhibition one.
Form generally has to follow function first. Finds like Pompii are primarily why it is thought by some that human civilization is far older than many historians currently agree it to be.
What is modern? Lodge? No.
People have been cooking food for tens of thousands of years. The bronze age began 6000 years ago or so. The frying pan is such a basic and obvious cooking tool that it seems likely they have existed for much of that time without too much change. So in a sense, the Pompeii pans *are* modern.
In fact, if you compare the 100 year old cast iron pans and skillets that collectors pay ridiculous amounts for to the ones you can buy today at Target (mostly Lodge brand) I'd have to say that our technology today is less advanced than it once was.
It's incredible. It's like a copy of the original. Fucking sorcery.
I am enjoying this series on bronze casting quite a lot. Thanks!
I totally didn't expect the bacon frying magic stump.
Years later watching this and this is outstanding, thank you for being an inspiration and having fun doing
In a hundred years the person finding this skillet will be mighty confused...I didn't know Lodge made bronze cookware>>>nice video and the stove is just as impressive..
There is a separate video on the wooden rocket store, search my videos for it and please share them with others
Wow unbelievable. Like you said the stuff that they had back then was just like the stuff we have today. Thank you for sharing that.
Your sergeant should remind you about pouring molten metal barefooted. Seems risky to me. I don't even eat breakfast without boots on. But that skillet looks sweet! Good work.
Awesome! Bacon and eggs from a bronze skillet over a rocket stove out in the woods. Now, that is living at its best. Thanks for the great vid.
thanks for watching Please share it with others
Great videos! Thank you!
Thank You
Amazing cast replica. It's nicer in bronze than iron. Your stove was BRILLIANT!
Was the stove at the end basically a fancy Swedish torch?
At my point of view,yes,it is.
I've been watching your videos for a bit now and learning so much. While I'm always impressed this was especially impressive to me in large part because I'm also a metal worker in my spare time. Wow!
You wouldnt download a cast bronze skillet.
You know, I would if I could. He has his and I have a copy of his, sounds like a good deal to me!
voltare2amstereo - I know this is going to blow your mind, but this is also a think in the U.S., the U.K. and N.Z... I'm sure Russia has a version of it as well.
It was literally everywhere.
You wouldn't steal a handbag.
You wouldn't steal a car.
You wouldn't steal a baby.
You wouldn't shoot a policeman.
And then steal his helmet.
You wouldn't go to the toilet in his helmet.
And then send it to the policeman's grieving widow.
And then steal it again!
It's took me 5 minutes to stop laughing enough to reply to this comment. You made my year bro.
Thank you Corporal that was a great heel stretch to making that frying pan I think you do a great job every time I always give you a thumbs up thank you thank you thank you Sean Kelly
Nice pan.i like it.thanks.👍👌🍳
That is a beautiful pan! Thanks so much 4 this demonstration.
This just might be the best video on you tube.
Share the video with others. Thanks for watching
I agree, best use of my time.
That wooden stove; genius. I've always known that you learn something new every day. Herewith an example.
You've obviously got some good experience casting. I liked the log stove too. What was the metals and the ratio to make the bronze? (liked and shared) 👍
Sean Connolly I don't know what he used, but 10% tin is a baseline
O wow! That is amazing and it is beautiful too!
Great work. Nice video.
Please consider limiting your use of this skillet. Acids produced during cooking lead to higher levels of copper in the food.
As an example, nitrates and nitrites that give bacon the pink color and unique taste are easily converted to nitric acid and nitrous acid, respectively. These acids react with the copper in the skillet and copper compounds end up in the food.
A very small amount of copper is necessary, but we typically easily get this in the trace amounts required without any supplementation needed.
Excess copper disturbs you proper use of zinc. You can look up the variety.of symptoms if concerned. I doubt using this skillet occasionally (couple times a year?) would present much danger to an otherwise health adult. I don't think using it daily or feeding children from this skillet is a good idea.
.
I am assuming your copper and tin were from sources known to be free of things like lead and arsenic. If you aren't absolutely certain the composition, you should not eat food off these.
You might consider tin plating your skillet for additional safety and usability.
I will consider it. Thanks for watching
I agree with this comment. Acids could cause health issues especially if the copper or tin have residual lead, zinc or other heavy metals (Mercury and cadmium come to mind.) If I had something like this I would tin it with a non toxic grade of silver solder such as ASTM96TS which is considered a food service grade of silver solder (96% tin, 4% silver).
While I don't discount the facts you are presenting, I think it is important to also remember that the people of Pompeii and Rome in general used these on a regular basis, and thrived to create one of history's greatest civilizations. I doubt that this pan will see daily use, and even if it does, there is little dangerin the foods he is cooking here; considering that acids are water soluble and the food is swimming in bacon grease. All things in moderation, I guess I would recommend, including moderation in worry over the health issues.
Ben Griffin
I wish people would be more logical and less hysterical about safety. It's a myth that overkill makes anything safer.
Not only is copper highly corrosion resistant, copper salts taste disgusting (try tasting a small amount of copper sulphate if you don't believe me!). The food would taste off if significant amounts of copper were getting into it.
Sir, brilliant and inspirational in equal measure. Thanks for passing that along.
I want one, how much?
Same here, or maybe a smaller size.
Out-STANDING project and a magnificent bronze skillet as a result. I'm always left mystified when I see someone cast - as a scientist I fully understand how it can be done but as someone completely incapable of carrying out such a task it looks like black magic to me! Excellent video.
crap how do i make the casting sand
This is one of the coolest things I've ever seen someone do.
Hoo raw brother
Or as the Romans would have said: Hooeth Raweth.
I believe they said: "Why the fuck are we speaking English?"
They would probably say something along the lines of, "Veni, vidi, vici." The quote has be attributed to Julius Caesar and means, "I came, I saw, I conquered."
OUTSTANDING! to say the least! I thoroughly enjoy your videos. Inspirational, educational, and just plain fun!
a... wood wood stove....
Such as life!
Great little history lesson and how-to, thanks.
now I'm hungry
Great video ! That pan turned out awesome! Thank you for sharing.
Keep in mind that the copper in the alloy breaks down vitamin C. This can lead to scurvy if no source of this is supplemented. Most of the cooking wear on ship in the past were off copper.
Agreed
Yeah no shit. I'm not sure why these dumb assholes eat hot food at all, we should all gulp down soylent shakes.
Vitamin C also breaks down in the cooking process.
Yeah. However, using cast iron causes iron to leach into food, which is a good thing since most people don't get enough iron in their diet anyway.
Back then cooper may have been a desirable trade-off considering it's pathogen fighting properties.
That's good man. Nice to see you still got the army's ingenuity and make do.
"Romans could do that? .... I could do that."
Next video: taking over the majority of Europe
redsmerf
Been there, done that. Don't, doesn't make you popular.
Greetings from Germany.
Pompeii is a vast archaeological site in southern Italy’s Campania region, near the coast of the Bay of Naples. Once a thriving and sophisticated Roman city! They were Romans lol!
+Michael Staadt And still people think Germans don't have a sense of humor.
Grüsse aus Venlo.
You Sir are an artist. Keep up the good work. I love the bronze skillet. I would love to try and make one some day.
Use a magnet to remove the skillet before pouring.
Corporal...Sir..., That was OUTSTANDING!!! Preciate all your skills that you're giving out!
Mmmmm bacon
Very talented, I don’t think I could replicate the pan/skillet but definitely will try the stove style log.
I wonder if they made their kids got to their room
A fantastic video. A fabulous frying pan made with ancient means and methods. Thanks Shawn, really good video. I'm sure the food tasted very, very good in that pan. 👍😉
This is just brilliant! I was amazed enough at you casting the bronze skillet, but that tree stump rocket stove at the end was the icing on the cake.
Kelly, I liked the ideas of the past.. Thank U for sharing how to make a skillet from the past.. The movie about Pompeii was great... When the volcano erupted it was a site to see.. The movie was good.. Thank U corporal Kelly for showing us how to make something from the past.. Hope U & your family are doing well & staying safe... Take care & I'll see U on the flip flop...
The technology that the ancients had blows my mind! Thanks for sharing this ancient skill!
Ive seen a few videos of yours and my knowledge of survival has gone up ,thank you keep up the great work
Another video that should be shown in schools. Great project.
Cool. Exactly the same model skillet (cast iron) my mother got from her landlady 70 years ago. Perfect for the breakfast egg.
Sir,
I admire your technical skill, but I stand in awe of your deep understanding of the closeness of ancient Roman culture and modern culture. Few Americans, and probably even fewer Europeans have such understanding. And understanding the past is also very relevant for the future, I wish you well. Please spread your thoughts.
Kind Regards,
Tielo Jongmans
Wow that one came out really nice, lodge logo and all. Very well done.
Thanks again
I get those candles in a small cast iron skillet, take the wax and smooth. Then use it for hot skillets dinners camping. So many great ideas from the comments thank you for your service.
AWESOMELY BRILLIANT!!!!!........Thank You for these videos!
That was great, and the stump rocket stove is something I will have to try and make as well.
Nice looking skillet, might have to do one of those myself to add to the collection
Knocked it out of the park once again. Great work man.
I stand corrected on my non-knowlege of bronze Roman frying pans . Very interesting video , casting , rocket stove , which is super practical , and informative history lesson . Haven't heard Willie Pete in forever ! Semper Fi , Devil Dog from a fellow CPL .
I thank you for sharing this experience with me and others here.
Great job and great life adventures to you.
That was way cool. Watching you make that pan was like watching an artist creating a masterpiece.
That's a beautiful pan! Great work
I like that little hand drill I want one now lol I can't wait for next summer I'm gonna be more outdoors person so I can teach my son alot that type stuff along with survival skills
OMG! You made a pan! I loved that - really shinny and pretty! I called my hubbs Harry to come and watch. He totally understood what you were doing - I didn't! LOL! That was sooo neat to watch. WOW! Thank you for showing us this. I have my cast iron skillets (I take them camping) I love using them, they are also "seasoned" well.
Thanks for the continued support
mmmm... that looked delicious!! good job brother ! now that's how you taste the fruits of your labor!!