Worked awesome, saved a stihl ms261 cylinder off a saw I got recently. I also have a another stihl ms261 that has been mastermind and I love it thing cuts like a dream with a 20” 3/8 bar and chain
Mastermind Worksaws, this is an excellent instructional video. I am looking forward to trying this today. What is the exact Scotch-Brite coarseness used in this?
Great video! What actually causes the aluminum transfer? Is it from running the saw lean? Can this be prevented with a richer oil mix, and richer carb settings?
would this work on older poulans? like the 2300s or the s25da saws?or is the plating to soft on them? great video....im someone that needs to see it .... thanks for the video...
you could have used a flapper wheel on a electric dremel i used muratic acid today , went through 40 q tips still small chunk of aluminium on cylinder wall
![ลองสุ่มไอโฟน 990 โกงมั้ย? [ โกงมั้ยครับ ep.101 ] | DOM](http://i.ytimg.com/vi/bfsWe0j492k/mqdefault.jpg)
![How To EASILY Remove Melted Piston From Your 2 Stroke Cylinder! [REMOVING PISTON TRANSFER]](/img/n.gif)
Wonderful. My wife was even impressed.
Thanks for the videos. I will have a go at my first cylinder clean up this evening.
Worked awesome, saved a stihl ms261 cylinder off a saw I got recently. I also have a another stihl ms261 that has been mastermind and I love it thing cuts like a dream with a 20” 3/8 bar and chain
Tnanks for the video. Redoing a 570 with some Al transfer and trying to save the cylinder this should work perfectly.
Mastermind Worksaws, this is an excellent instructional video. I am looking forward to trying this today. What is the exact Scotch-Brite coarseness used in this?
scotchbrite red
@@cartervaughn9180 , thanks!
Nice ...wht is that tool you are using?
Frets Nirvana
Foredom #30 handpiece
Great video! What actually causes the aluminum transfer? Is it from running the saw lean? Can this be prevented with a richer oil mix, and richer carb settings?
Even if you mix fuel and oil correctly and tune the carb properly, air leak still gonna cause saw running too lean and lead to the seizure.
would this work on older poulans? like the 2300s or the s25da saws?or is the plating to soft on them? great video....im someone that needs to see it .... thanks for the video...
It will work on any plated jug...
2300 had an unplated aluminum cylinder bore with a chrome plated piston SD25A had a chrome plated cylinder bore with an unplated aluminum piston
DAGWOOD... that is a sanding disk arbor, the rubber disk is cut down smaller than the cylinder ID
After this cleaning, the cylinder needs to be honed?
Cristi Ro No. just washed out to remove any stray grit.
Thanks!
All the best! :D
do you flex hone the Cylinder After ???????????????????????????
Joni English
No I don't.
you could have used a flapper wheel on a electric dremel
i used muratic acid today , went through 40 q tips still small chunk of aluminium on cylinder wall
going to try your method
Randy ! Help us with removing the background noise :(
Not sure what you mean sir.
thats a good idea with scotch brite pad ,i will try that after
Joni English
Glad this helped.
Just what I needed to know, thanks!
Bazooka 4
You are very welcome.
What was that thing you used with the ScotchBrite pad and where can I get one?
*bump*
very cool
What was the tool you used with the ScotchBrite pad and where can I get one or build one?
That was something I made. Now you can get scotch brite flap wheels. Just search for them online.
@@mastermind7864 Wilco, thanks.