Budget Sensah RX10 Groupset Install & Mailtime
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- We put the Sensah RX10 Groupset a new rear wheel and some RockBros Grips on the Budget Boundary plus Mailtime
Mailtime 3:01
Sensah RX10 install 8:03
If you would like to help support our channel you can use our affiliate links below at no cost to you and we might get a buck or two and/or you can buy us some coffee here: www.buymeacoff...
Affiliate Links:
Replacement Derailleur Hanger Schwinn: ebay.us/iUfw5n
SENSAH MTB Groupset: ebay.us/MGiXRd
ROCKBROS Bicycle Handlebar Grips: ebay.us/9ZyEIi
Zoom HB-100 Xtech HYDRAULIC BRAKES: ebay.us/q7LhJI
8 Color 80 PCS Cable End Crimps: ebay.us/xIubny
Oumers Bike Chain Splitter: amzn.to/3dLmNNo
Oumers Bike Link Plier: amzn.to/372Dik8
Wheel Master 29` Alloy Mountain Disc Double Wall(same or similar): ebay.us/Rsiptl
#wolfticknation #budgetboundary #budgetgroupset
4-16-21
One of the very few benefits of working third shift is getting to watch your videos first thing in the morning. Thanks guys!
Only benefit of my boys waking me up at 6am on the west coast everyday is I get to catch the vids early also.
💙
Well thats a very nice thing to say Brice, thanks man and hope we can help keep you up:) Or awake...😜
Kudos to your integrity guys. Respect!
Thank You Blair,we new #wolfticknation would appreciate!
Hey man, in the biggest cog it looks really tight. I’d add more length to the chain.
Agreed. Add a link and check the B tension is right. Also check your chain line - make sure the front chainring is in line with the middle of the cassette.
It def does....I sized it then it pretty much layed across the chainstay. I then tightened the B tensioner screw and it ate up some slack, but still not enough. Then went link by link by master link till it was a happy medium? It seems as if there is 1 link to short or 1 link to long, I figured I would be doing less climbing so I went less chain. But we will see or I can play with it more...Thanks
@ Mikey-Gotcha:) I am sure the Budget Boundary will be getting a new crankset as well so we will take a closer look:)
Definitely tight, a lot, the lower part of the chain should be very close to the rd in the smallest cog.
@Bryan C. Hernandez-its like smashed between the derailleur man, its weird. Well we got the realtime review coming out Friday and hope you watch it:)
All that green has the boundary looking nuclear
Hahaha☢️😆
Thank you guys for being real with us. One of great things about this chanel is that you guys are not fake. Really appreciate it. And crap happens. I bet this won't happen again. That moonshine looks interesting. Enjoy it :)
LOL ENJOYED!! Appreciate you understanding man, crap happens and it will be unlikely for ti to happen again:)
When did the opening become a alcohol review??
Could that be why you lost track of the battery power? Hahaha hahaha hahaha
Thanks wolf dad for being real . That's why I dig your channel you guy's actually seen to care about your viewers. I feel like you guy's are talking to me.
The bike looks great looking forward to see how it rides I have my thoughts on that..
Great episode.
Stay frosty brother
Thanks Poe, a guy mentioned that you may have that fork due to the hiding spot!! HA HA Glad you and others appreciate us for us man. It feels good and we are talking to you:) You are not just trippin lol!
Keep the videos coming. I'm at home recovering from surgery and binge watching your channel. Dreaming about restoring my 2012 Nishiki Kinzua when I recover.
Well man start making that list for when you make a FULL RECOVERY! Thank you so much for watching us:) Hopefully you can see some progression LOL. Thanks Jason
Nice to see that you finally shorten the chain the correct way 😉.The play in the top jockey wheel is most likely supposed to be there. It is an invention by Shimano and is there to make it shift better.
🤣🤣 Thanks for watchingbrother, appreciate the input.
HAPPY FRIDAY WOLFTICK NATION!!! HOPE YOU GUYS HAVE A GREAT WEEKEND!!!
💙💙#WOLFTICKNATION
You guys are awesome!!! You put a smile on my face every time. I agree that chain looks 1 to 2 links short, but that upper wheel is a bit sloppy for being new.
Gotcha man, we are going to play with it and see! Rode it today and......
Awe man my fingers are crossed for a top cap
bitter sweet mailtime. I’m happy for the video, but yeah I miss all of the wolfmans real reactions. Kudos for keeping it real like last week
Thanks brother, it was difficult and really killed us when we found out. The Mailtime is so important to us and especially those who send us stuff and take the money and time, so I was pretty heart broken after filming it realtime and finding out it did not keep the file that it died on:( But thank you for still enjoying!
Moooonshine!! Woooo boy. That's the good Sh*t (input chicken sound). I have a few jars in the fridge. Love that horizon glass can cup.
Man!! So glad you guys liked the Apache Pine stuff. Man, that sucks the camera died and lost the footage. Major buzz kill LOL. Apache Pine has some cool gadgets and I love their knives. I actually sent the knife thinking you'd use it on Mailtime. You have another package from me on the way. So be on the lookout.
Man Berserker is always coming through with some killer stuff. The stem caps are awesome!
Hell Yes!!! I've been waiting on this budget Groupset video and its a 10 SPEED! $76???? WHAT!!! I love that rear cassette with the red. That would match the Fragments new look so well. Man you guys cant even begin to imagine the transition that the fragment has taken. Cant wait to share some pictures and get on the Viewer Rides. I'm looking forward to seeing the Groupset in action and how well it performs.
I might be building a budget full suspension in the near future. So these budget parts you guys share are going to come in handy. I'll keep you guys updated on that. I'm heading out to Destin Florida Sunday and I'll be there for a week. I'll try and keep up with the videos while I am there though.
Awesome Brett, much love from here in Ar! Loved the grab bag for sure, very cool and USEFUL! New MAILTIME knife for sure:) Have fun in Destin and take you some MOONSHINE! Later Brother, looking forward to some mail and Coffee Shoutouts:)
It’s Friday, Good Morning WolfTick Nation . Y’all have a Great day Today 👊🏽
💪💪
Y’all are gonna love that suntour xcr. I haven’t heard a single bad review on that fork except for the lockout i heard and its also upgradable to air. Planning to buy that soon so im definitely waiting for a review haha
I have the xcr Air on my 29er. It's ok. A little heavy
@@bobbye7353 oh really? How heavy is it?
💪Awesome man, we will try and do it justice:) Thanks Darryl
@@WOLFTICKVIDEOS a comparison of sensah and ltwoo would be really interesting
@@DM-rh7qb I'm putting it on my Axum that I ordered Monday as soon as FedEx delivers. I'll weigh it for you and post the info here.
Great video guys those Grips look pretty cool I personally actually like a fatter grip I use special bars at the gym that have a bigger width for that reason too because of my long fingers.... we will probably be doing a video about that soon actually sometime....anyway we are finally home and getting caught up with stuff and are mailing out your Fanny packs today we still have your PO Box from when we sent the stickers a while back.... we hope you guys have an awesome weekend!
Grips are nice man, I just hope they arent too big for me:) You are a bugger guy so probably right up your alley lol. So happy you are back home! Awesome and I am sure it will be a minute before you endup in Florida again!!LOL Looking forward to the fannie pacs! Thanks Fellas
I have an older Boundary, but have all the he parts for upgrades. The tires are actually pretty good still.
Nice man, the tires as you can see we put back on, but maybe a future upgrade as well:)
LMAO BLAMING IT ON THE BATTERY DUDES????.... Miss American pie got yall all MESSED up!!!! Love you guys...this was hilarious 😆🤣😄
HA HA HA Thanks man!!! Totally the shine:)LOL You got us!!!🤣🤣🤣🙊
Earliest I've ever been to one of y'alls video
HA HA now thats what we like to hear brother, thank you and hope we did it JUSTICE:)
Hello wolf tick thanks for the sticker I put it on my helmet
Awesome Evan, glad to hear it man. Very cool ride you got and hope to see it all upgraded soon! Thanks for being apart of the #wolfticknation🤘
That chain did look too long until you put it in 1st gear! I always cut my chains to your sizing method, works good everytime! I would love to get one of those steering caps!
Thanks man, I gotta check into it a little bit more. It seems the chain is a little too taught when extended in 1st but.....1 more link and its too much even after tightening the B tensioner:) As for the caps.....we will have to see:) Thanks Chris H?????
Good video. Thanks for keeping it real.
Thanks Shanning:) We will continue to do so brother:)
I’ll be honest that looked like a little baggie of 🌲🌲that’s a good hiding spot
🤣🤣🤣🤣🤔🤔🤔
I was recently wondering when you guys were gonna get an xcr lol and here it is!
I'm really looking forward to those grips too, my current ones hurt my hands and I have big hands so thick grips are the way to go for me!
Nice man, Cody D read your ind:) The grips on the other hand (pun intended) seem to be pretty nice, I am just wondering about wear? Foam you never know, but thanks Brother!
@@WOLFTICKVIDEOS really hope those grips are good! Cant wait for the fork video too
i wonder if you need the derailleur extenter... anyway great video, as usual, and great show of integrity, if you have one thing to show let that be it
Thanks Nuno, its important and glad we did:) Also I may try and take that thang off there.....Then see how the derailleur clears.
Awesome video …been waiting for something like this to upgrade my boundary …. Thanks wolftick nation you guys are awesome 👍🏼
Hey man thanks! We got some more coming soon to the "Budget Boundary" so stick around.👍
@@WOLFTICKVIDEOS awesome can’t wait to see it 👍🏼
After few jumps with that rockbros grips i ripped it near the bar ends
Dude that sucks! Hope we have better luck, and hey at least the're cheap🤣. Thanks man👍
No worries! Sh!t happens! I'm sure it was an epic mailtime! I'll second what someone else said, the chain looks too short in the biggest cog. Looking forward to a real time review on it to see how it holds up.
Thanks brother, it def happens! Hope it will not again:) Now the chain is acting like it is either too long or too short? I messed with the B tensioner and still a little funky! LOL Looking forward to the realtime review as well man, thanks:)
Found your channel via a UK forum/mag (single track world) and have enjoyed catching up on them!
On this setup up I think you might be able to go without the generic goat link as the space between the top jockey and 46t looks to be sufficient?
Anyway, great work guys, I'm a fan.👍
Hey man that's awesome! We seem to have a good number of y'all from the UK watching. Something is definitely off about that thing. When it's in 10th gear the chain is too slack but when it's in 1st gear it's too tight. We are going to try to take it out soon and test it hopefully we will get it figured out. Thanks man and welcome to the #wolfticknation.
I put the RX10 on my daughters flat bar gravel bike with a road link. Very nice in that application. Not as challenging as a mtb application though.
👍Well glad you were able to get it dialed in:) I am having some issues with the derailleur full stretched out. I will take some time to play with it but it seems when resizing the chain it is either too much or just not enough!! Driving me crazy when I watch the film back:)Thanks for watching brother:)
@@WOLFTICKVIDEOS i can’t remember how many links i removed from the chain on my install. i purchased a kmc 10 speed chain separately and mine didn’t come with the road link like yours did. you probably know all of this already but that chain is too short for sure and it looked like you needed some b screw adjustment also. all of that being said it still makes a lot of noise in the biggest cog on my daughters bike. i think that is a chain line issue though.
Agree man, I feel it is a lot of alignment issues as well as well as some chain funkiness:) Thanks for the response back Jamie H4
I have the 8 speed ready to go on my son's next bike.
NICE! A new groupset completely changes the experience negative and positively in some cases!!LOL
I’m going to try and get one of those top caps
We definitely need to figure out what we are going to do on those for sure. Thanks buddy👍
I will attest to the fact that it is hard to find a decent rear wheel right now, unless you got a thru axle frame. Those wheels are everywhere but a QR with a sealed hub is impossible. I got a wheel with a strong rim but the hub isn't sealed. Stay tuned for that. Bummer about the mailtime file not saving, watch that battery!!
😎⚓👍
And Cap made a sweet Apple pie and berry blast moonshine out of plain store bought shine. I dont have a "guy" for that. That was before my kidney problems days.
Keep checking Amazon for that budget cycling deal wheelset. I found the QR front and rear end of March in the warehouse deals. Said they were used but you could tell they were new. Paid pre-pandemic pricing.
Man, damn KIDNEY!
👍Yeah brother we will be sure to check:) As far as a budget rear wheel we are interested to see what El Capitan pulls out of his sleeve:)
@@WOLFTICKVIDEOS people are either gonna think im crazy or I am a genius when they see my back wheel on The Captains Compzerker!!
Let’s see you guys hit 10,000 subs!!! 😁👍👍
Let's see it!👍😅.
Yesss let’s!!!
Try putting one chain link back In to see if that sorts the jockey wheel problem or it could be fine tuning the L screw for the climbing gears ⚙
Man I will try, its a mess ha ha I tightened up the B screw ad it is just too long and too short??? Maybe the extension needs to be removed:)
Man "crap" happens but good on ya'll for being real we got to get to those tire reviews come on boys i need that list lol
LOL Will do man! Got one filmed already and will be airing soon hopefully:) Thanks brother
LMAO. I swear that is just a plug in the fork!!!!! I'm dying 🤣🤣🤣🤣🤣
It should be a crownrace hahaha. Love you guys
Haha man we haven't even gone back and found out what it was yet. We just thought it was funny as hell and a bit awkward.🤣
I'm glad you enjoyed it, that little bag saved the redo. Glad we didn't see it the first go around.🤣🤣
great video can't wait for the real time review keep being real and keep up the great video's
Thanks man! We hope to film it soon if we get a break from the rain.
16:10 try it with out the extender, see if it does not rub
I will and kinda did, it wouldent clear...
Cool groupset! I could see myself using something like that. Good alternative to micro shift
Man I hope it turns it alright:) I went from sizing the chain and it almost laying on my chainstay to lengthening it and tightening up the B tensioner screw and it being too short.......I will have to spend some time on it:) Thanks Evan!
@Giuliano Skywalker-Nice advice broter, thank you!
Your Dad made the video great 👍 🦊
🤣🤣🤣
Hahaha 🤣 both of you enjoy and chill nice😉.
Thanks man😎🤣👍
Thanks for content !
Your welcome! Thanks for watching👍.
Another great video👍 i would love you guys to do some painting of rims, frames and stuff that’d be sick
Thanks Tom, I would like to do that as well man. Imma try and talk dad into it!
The top pulley on most derailleurs has SOME play to center on the cog ... It looks to me like the B tension screw needs to be loosened so the guide pulley is closer to the cassette in the lowest gear ... A bent derailleur hanger will make the low gears shift bad
Thanks for the info man, we will play with it some more. I know the chain is a little weird but maybe we need to replace the wheel:) Later man and appreciate the input
Hey that’s the fork I run!!! Love it to death. The xcr34 is a good rig
Hell yeah Will, we are very grateful to have had one sent from Cody D!!! Looking forward to the install man:) Hopefully we like it as much as you
On the biggest cog, the system is stretched out. Please add 1 or 2 more link to the chain. Then with the longer chain, the chain itself will be tensioning the guide pulley and maybe decrease the noise.
Also great videos. Enjoying a lot.
First of all thanks! Now let me try and explain..It def does....I sized it then it pretty much layed across the chainstay. I then tightened the B tensioner screw and it ate up some slack, but still not enough. Then went link by link by master link till it was a happy medium? It seems as if there is 1 link to short or 1 link to long, I figured I would be doing less climbing so I went less chain. But we will see or I can play with it more...Thanks
I have to admit, that apple pie Moonshine looks revolting, but man I wanna try some having seen how you guys liked it 🍻
That sucks about the mail time, but sh*t does happen, just one of those things, but I definitely couldn't of watched you acting 😂
Great video as always, looking forward to the real time on the group set.
Stay safe guys, enjoy the Moonshine 😎😎🍻🍻
It would be right up your alley Dan!! Have a great weekend and hope you are sleeping right now! :) We will save you a sip!
@@WOLFTICKVIDEOS I'll look forward to it bro.
Nah, up and about, Jacob doesn't do staying in bed and I've got work for a little bit this morning 🙄
Have a good one dude 🍻😎
Damn KIDS! LOL
@@WOLFTICKVIDEOS tell me about it 😂
Perfect timing as I need a budget group set right now on a graveyard frankenstein build based on an old Schwinn S40 DSX full suspension. Can that noisy jocky wheel be upgraded ? Oh yeah and it needs a stem cap!
🤣🤣Awesome man, maybe your next $76 upgrade!! LOL jockey wheel yes, needs one and I have one!!
The upper jockey wheel should not only spin freely but should have play on the z-axis so that it can adjust during the shift range. The lower wheel can have almost no play.
👍 Got some jockey wheels in a mailtime segment that we should be installing soon.
@@WOLFTICKVIDEOS Awesome! The upper wheel should also be lubed properly and then spin freely and have side to side play, or else it wont stay in the gear you shift into.
👍 Thanks brother:)
I know Im really late but Im trying to wach all videos
Man not a problem, thanks for finding some time
Should do a video on recommended biking shoes. Or other gear.
Thay sounds interesting thanks Marvin. We have got the Bucklos shoes we kinda review with the pedal shootout video, and we are in the middle of a possible collab with a mtb shoe company at the moment, we shall see. Thanks and be on the lookout👍👍
12:10 I see the rubber end cap fell off the rod on the chain splitter, I recommend to use gorilla tape for example to stop the rod from falling out.
I had to do this on Lezyne Chain Drive
👍
That top jockey wheel is definitely missing a m
Bushing of some sort, packing it full of grease could help to reduce some of the noise but I'd go to the hardware store and try to find a part that fits
Thank you, good idea:)
Awesome chanal, like it😎👍
Best regards from germany 🍺😃👍
THANKS BROTHER!!!! GERMANY-That is just too damn COOL Vielen Dank, dass Sie uns gefunden haben! Hoffentlich bleibst du hier und genießt es weiter - besonders im Oktober! Papa liebt deutsches BIER :) CHEERS BROTHER
Bad ass knife!
Dude Brett Parker has got us setup for another Mailtime! Thanks
Sensah is pronounced "sen-say" ---probably the moonshine kickin' in. lol great segment...
Comon eBike Mike we wouldn't be us if we didn't butcher a name or two once in a while.🤣
I want a stem cap! lol
HA HA I BET YOU DO!
7:17 that's probably a travel spacer. probably you just pop it on or off the shaft. my BikeYoke Divine dropper post has this feature. but I don't need it.
Gotcha:)
No rips offs in da nation, wah- hooooooo
That's right!🤣
Love me some apple pie moonshine, that stuff will get you hammered real quick if you don't pay attention xD It doesn't taste as strong as it is...
As for the drivetrain, if I'm spending money on a new one in 2021 I'd at least want one that has a clutch ... so I don't really think this is worth it imo
Agree man, but this is what we do and its priced right for the BUDGET BOUNDARY:) Who knows it may just blow your socks off!!LOL We will see ha ha thanks man an damn shine was delicious:)
im here in CA, I got some green for you lol
Hahaha were good man, but thanks anyway👍
Suntour fork!! You could put your weed in there!!
🤣🤣🤣🤣POE LAWLESS HAS GOT 2 FORKS!!!!!LMFAO!!!!
Respect for being real!! Still a great video!!!
Thanks Jason, very nice of people to understand:)
Respect wolf man Im not a actor 👊🏾
🙏🙏🙏
15:11 the B screw has to bee turned out a lot. the chain is way too far away. so it needs adjustment. but the guide pulley is close enough to the smaller cogs. but you need to adjust it for sure.
It def does....I sized it then it pretty much layed across the chainstay. I then tightened the B tensioner screw and it ate up some slack, but still not enough. Then went link by link by master link till it was a happy medium? It seems as if there is 1 link to short or 1 link to long, I figured I would be doing less climbing so I went less chain. But we will see or I can play with it more...Thanks
@@WOLFTICKVIDEOS yep that's the way to do it just had to do some of thst myself yesterday. I've installed it and the shifting is improved. Rd sits further down and adjusting the b bolt out puts the rd forward. Much better shifting and I have 118 link chain now, so easier to buy those. Than 120 link chain. But I had to use a longer cable and wire.
Nice, glad you got her going :)
Man I hate it when my videos don’t save, this happened to me today at the dirt jump park, I was filming for my Instagram and I was doing great and I go to review the videos and I didn’t save🥲 I’m not sure about those grips man I don’t like the feeling of fat foam on my bike haha.
Dude I don like fat anything and I really hope they dont get all soaky uppy of sweat!! LOL Thanks brother, really a shame it did not save when the camera shut off:)
sensah vs ltwoo on trails, does it perform well on trails or does it slap hard on trail?
if you just didn't cut those chain, it wouldn't be a problem, your derailleur looks very extended and may result accidents, just take note when installing a new one drivetrain, don't cut it before installing the groupset, cut it after you see if it needs to be cut out......
Well I got more than enough master links as a just incase but I do appreciate the input. The chain is way long in 10th gear? I tightened the B screw and everything, got any ideas?
Lol my lt woo a7 group set came with the ssme chainring and chain. Sadly i still dont have a wheel for it so im stuck climbing big hills with a 28t on a 33 pound bike 😂
Man just keep an eye out, I believe for $80 you can get a rear wheel on amazon??
@@WOLFTICKVIDEOS yeahon amazon no luck. but I did find one on aliexpress. it should come sometime in may and has sealed bearings. hopefully its not a scam and everything works out.
Hope so man, let us know:)
Man, gotta wait to see what you think about those foam grips. I used some once, and they get all sweaty
LO I hope mine dont:) But here in Arkansas will be a great test! I just hope they dont wear really fast.
It was nice of Cody to give you a bag of lube with that fork.
🤣🤣🤣Is that what that was???!!!
Is the top jocky wheel missing one of the bushings?
MAYBE??? I am not to sure man, it seems like the cogs arent tall enough?
Aww hells yes, "sensie" group set wah- hoooooo
👍
too much moonshine there huh? forgot to check the battery haha
Jeremiah used a dang aftermarket battery after I told him not too.🤬
Always make sure batteries are charged!!! Lmao sucks that you guys lost that footage mailtime was still good though. Also did winners for the last giveaway already get drawn?
Hey brother they did get drawn, now I believe the winners are on the axum realtime review or the initial. Thanks and maybe you won!!
Looking forward to see what you think about that fork from Cody. I have the non boost QR version of it and I think it’s a decent fork similar performance to the Lutu
Are you seriously comparing those cheap Chinese lutu forks to a solid and reliable branded suntour fork . The lutu fork those guys had is broken after only 3 or 4 months use doesn't matter what they done with it . It only survived 3 or 4 months. Have you done any research on those lutu forks at all . Have a look at some of the horror stories on TH-cam about cheap Chinese forks .
@Richard Sneddon man you need to let it go if for nothing else for your health. So let me ask you this, if you have a truck rated to tow 5000lbs and you decide to see how long you can tow 12000lbs with that truck would you then be upset if after 5 months the truck started to breakdown? The fork has stickers on it warning people to not use them for freeride, jumping, downhill, or enduro. It is just not logical to be upset if it fails when abused past it's limits. We have no problem with you expressing your hate for the Lutu's or for us rating them, but please man we're asking you to not be aggressive with other commentators about it. We value you as part of the #wolfticknation but we don't believe in bike or bike parts shaming.
@Just Another Hardtail Man we have some forks to test and rate don't we🤣. We are lucky to have the #wolfticknation for sure. Man we have a couple of things going on but we will be getting to this stuff sooner or later. Thanks man👍
@@WOLFTICKVIDEOS well that's a sensible comment isn't it . ??. . And aggressive? ? . Is that because it's the truth .. . I didn't know being truthful was aggressive ...
@@WOLFTICKVIDEOS oh and another thing as for being not suitable for free ride etc . Check out your other forks as I am quite sure you will see the same sticker down the bottom on pretty much every one you own . And as for the truck comment the answer to that is simple I wouldn't do it or show or promote to other people me doing it . I hope you don't find this comment too aggressive for you as it's not meant to be . Truthful yes but aggressive certainly not . I am no longer part of your nation .
Are you getting some resistance in 1st gear right now? Ii don't you need that derailleur hanger extension. Take it off and resize the chain again, bet it will run smoother.
Will try man, I was wondering if I should of done that. My only concern is if the derailleur clears the 1st gear cog:) Thanks!
@@WOLFTICKVIDEOS i think it should. I mounted a 9speed sunrace w/50t cassette on a carbon x 29, running on sunrace m9 derailleur. I added the extension link and it shift weird. Took it off, remount, adjusted b screw, no issues, every gear shift like butter...good luck!
Thanks brother! We will see:) Also Damn you for having a CARBON X!🤣🤣🤣
Would this be a nice upgrade for a mongoose malus like the one you have as an upgrade
I think it may be a needed one yes, especially if you are riding on light trails. But a big thing you have to remember is the Malus has a freewheel and you would have to get a new back wheel just to be able to fit the cassette.
I though your chain could be a few links longer. The chain looks stretched.
Man it does look wuite stretched yes, but in 10th it is just right then I added a link and it is practically touching the chainstay??? I will have to get it just right:)
Question. You went real short on chain. Did that work good. I did a 1x11 on my gt richochet and I am about 4:30 on biggest ring. You are like 3:30. I am always worried I am gonna tear it off(again)
It works man and we will have a realtime review coming up Friday, now yours sounds about right mine is tight for sure but we will explain a little info coming up friday:) Thanks man
Damn, you guys were so sad about the mailtime, this drivetrain seems comparable to advent x, personally I would spend the extra 100 on advent x because that pulleye would drive me crazy and the deraihlor having no clutch but maybe for a super budget bike this would be good, and I was wondering what you thought of the x6 crankset, from the same people who make ixf, but I think it wold look better on my bike
He brother, we have got to get the X6 crankset. I have seen ti and it looks to me like its a cleaner look but what are the upsides in your opinion?
@@WOLFTICKVIDEOS I think it would look better for the all black look I am going for with my bike, only upside I see
Not a bad upgrade then:) Do it and film it. By the way loved the pic of me dropping i from the sky box!!! Very cool man, thanks
@@WOLFTICKVIDEOS no problem it fit perfectly in!
I use the same grips if u dont like them it is your small hands thats the ichue
HA HA HA!
when are you going to install the epixon air fork on the gt agressor
Man who knows with all of this new bike craziness. Hopefully soon man.👍 We always look forward to the GT and new forks to test out.
What are all the upgrades on your GT Agressor pro
For sure bud, check out our GTs newest Budget Upgrades Update video, we talk about all of them, there are affiliate links in the description as well. Have fun and keep shredding man
CLARKS Rotors 180MM
ebay.us/M6Kjjq
Shimano Mt420
ebay.us/yyKEPs
Shimano MT200
ebay.us/PtrKcV
GT Wheelset
ebay.us/jX57Bb
Raceface Chester Bar 35MM
ebay.us/FNBOXE
BOX 35MM Stem
ebay.us/WE9KkO
Bontrager Grips
ebay.us/U83YFV
RaceFace Ride Pedals
ebay.us/bwZZOI
Suntour Epixon Epicon
ebay.us/4tCoKz
IXF Crankset
ebay.us/om1weK
KS Dropper
ebay.us/n1F8dq
Acolyte Cassette 12-46T
ebay.us/axxKMm
Acolyte Shifter
ebay.us/cluqYz
Risk 34MM Headset
amzn.to/3fW5o60
I need one
The fork or the groupset?
@@WOLFTICKVIDEOS cap
👍👍👍
8:36 I bought a similar extender, it's a Wolftooth Road Link, I will test it on Box One X-Wide as it's not really suitable for 11-50T as Box Claims and on some bikes it's not even feasible cus of the B bolt/screw and ge, position, I had it all the way in, but I managed to undo it by two full turns, not as smooth down shift in the repair stand, but under sag point it works, this improved the shifting performance on the smaller cogs, but still not optimal. the Box One X-wide is really more suitable for 11-46T.
I will see if I can get the guide pulley closer to the smaller cogs, and in a good position for the 50T.
if not I will try Shimano Deore or SLX 12 speed.
I have Archer D1X Trail electronic shifting system, so I can swap cassettes and rear derailleurs, run what I want. any speed I want.
👍👍I have purchased the Wolftooth and it worked mighty fine for the GT back in the day:)
@@WOLFTICKVIDEOS that was a different type I have the road link you had the Goatlink. But quality product. I had both Goatlink 11, Goatlink 10 before, but I sold those. As I wore out the 10 speed slx and xtm8000 would eventually wear out so I sold it along with shifter.
Thats cray you actually wore out Derailleurs:):O:O:O:O:O
@@WOLFTICKVIDEOS those slx ones I wore out few years ago were stock on the fuel ex. But now I am doing last testing on Box One setup, I managed to set it up and get it to work. It solved the problem. But then I smashed the rear derailleur so hard the hanger bent. I had to bail, I did not have it on video as camera was out of battery, but that would have made some good content. I ran og into a tree had to bail when climbing techy rock garden i ran off and hit a tree with my right arm. No injury or pain. So I will have to straighten it.
@@WOLFTICKVIDEOS cray? Not heard that term before.
Would these fit on the gt aggressor pro
YES:)
Whats the best 10speed groupset under 100$?
Well the acolytebqith t he chain stabilizer if you can get it? Checkout our video on it man. It's an 8spd bit it's got an 11 to 46 tooth cassette! Thing is butter smooth on the GT
Would this fit on the original wheel?
No it would not brother, the boundary has a freewheel not a freehub....:(
Mail time took a day off, it;s ok =) no worries
🤣Man it sucked!
how does that compare to a shimano deore 10 speed (5100 i believe) price wise ? also could you tighten that jockey wheel ? if not i'd try to open it and add a dab of grease in there to reduce the play.
Hmmmm cant seem to find the 5100 10spd only the11spd and its waaay expensive.I think I may and try to change the Jockey wheel out?? I will add some grease as well:) Thanks Sim Dude
@@WOLFTICKVIDEOS ah yea wrong refrence. I was looking a bit on ebay the same kit you got but with deore 4100 10 speed non clutch is 139$. So quite a bit more expensive. I really wonder how it compares. Maybe one day you get your hand on some deore stuff !
That would be nice, ive got a shimano shadow xt deore m6000 derailleur ha ha thats a mouthful! Had it installed on the GT and DAMN! Super freaking quiet:) Thank you and we will look into it, not a bad price for a groupset
what about having the camera connected to a power course?
That would work, but we run s much lighting it would be a mess even more so in our small shop
@@WOLFTICKVIDEOS why would it? Have a battery bank connected to it attached to the stand so you can move it all over the place no extention cable needed. I have a battery bank in my backpack and even charge my camera while riding sometimes. I can fully charge my phone and gopro. And still have left over power. So make sure you get a powerbank that is portable, robust, water proof, and you got your self a reliable battery bank you can take anywhere. Mine even has a flashlight built in. Two USB ports.
Sounds like it may be feasible, We have got 4 battery banks so that may be an idea, thanks Johannes
Si tenes un piñon de 52 t dientes ese desviador es pequeño busca uno de 11 v
Will do man, thank you. Or we may use an extender.
Hay man I don't do social media is there anyway to send submissions with out it
Hey we ask people to email their bike pics and bike info along with their TH-cam name to us and then it's just a matter of Jeremiah selecting out of tons of emails. You can find our email in our about tab on our channel and look for business or something like that. Thanks Tim
Ohhh yeah and theres nothing wrong with THICCCC grips lol
YO THIC GRIP LOVER! LOL Thinking of a shirt "Thin Grip Rider"
@@WOLFTICKVIDEOS lol
Give the bike some Shimano MT 200s .
Yes it needs some:) The Mt200s are mighty fine!! Thanks for the viewing as always Armando
10:52 that's rebranded Formula hubs DC-22LW www.formulahubs.com/product.php?t=3 I had DC-32 rebranded as Bontrager.
👍
What was inside the bag?
We are scared to look hahaha.
@@WOLFTICKVIDEOS come on man! Don't be scared
🤣🤣Think it is an air 🤣spacer:) but really have not looked since we filmed!!
budget upgrade.. noizy as sh*t, but budget... probably a decent derailleur would fix the problem
🤣🤣🤣Budget is right:) Chain sizing was a mess and its either too much or not enough...But hey, lets see what happens:)
Can you change out jockey gear
yes, Ive got a few:)
@@WOLFTICKVIDEOS Did you go riding today me I'm just laying around going nuts trying to find something to do trying to find videos to watch
@@WOLFTICKVIDEOS you know we had Evel Knievel who jumped the Grand canyon on a motorcycle but I don't think anybody's ever done it with the mountain bike I'm not willing to try it though I think it would be a blast if it's a parachute
Yes sir. We filmed Ascension VS Axum-Budget Sensah Reatime review-Tektro Brakes and Rotor Realtime Review as well:) A Lot of riding! You will have some episodes to binge pretty soon man
🤔🤔🤔🤔I am going to go with NO......LOL
That cage looks too short for that cassette
Man I am wondering If I can run it without a extender?