I really liked this video! Thanks for the ideas. I never thought of doing multi-colored cutouts using that technique. I appreciate you sharing your ideas and artwork! I think everyone can learn from one another, even when we see mistakes we have made or others have made, it helps with our next project! I appreciate you showing a "TRUE" representation of making this decal from start to finish, even pointing out what you did wrong. That was helpful to me if I ever have to work on sheetrock. Thanks again!
Well I found that useful l like the way you work in the space available a real person doing real things just getting on with it I have a lot of respect for you my friend keep on keeping on ...
My speed i normally run at 500mm/s pressure varies with different material..get a couple circles on there and do some test cuts tell its dialed in were it comes off backing paper well but doesn't cut into backing paper
I buy from both Uscutter.com and Signwarehouse.com. I use oracal the most 651 vinyl and Ht55 transfertape unless I need a color or something that's not an option.
Thank you !! Yes I am still doing vinyl . Have not used a cutter/printer but my machine does it with registration Marks...its just harder using two machines to do it .
Sweet video. I imported a picture ,vectorized and cut it. I didn't see the fine detail till it started cutting at which time it tore holes in the vinyl. When vectorizing what settings work best? I use the same software
what kind of vinyl do you use to create your decals? I am currently doing heat transfer vinyl shirts but it doesn't make sense to me to use that vinyl for a car decal....any suggestions?
I've been wanting to get into it as a side hobby (just adding yet another one) and doing small scale vinyls for friends etc. I have been looking at the 28" Titan 3 and all the different vinyls but I'm also not sure which software to get, I have a iMac and a PC laptop. Thoughts/opinions on what you use?! Great video, screw what others say.
If you are wanting to do small scale things, might I suggest a cricut explore air 2. You can get kits on amazon with everything you need to start for about $290. It comes with an easy to use software. And settings for different materials. I have one myself and I can't recommend it enough.
I am not to sure on that , I would contact vinyl masters and see .. other wise I know sure cuts alot software is alot similar to ..but I also dont know if that's good for multiple machines
epoweredrc just got a click on that white with the X ,That will make it so it Picks up the white as a vector color.. A lot of times it does that because the background Is normally white
Rontae Moyer it is just a cutter so you would have to layer vinyl if you wanted it to be multicolored like in my video , a lot of those vinyl wraps that you see online are printed vinyl so it's only one layer you run it through the printer then you put it in the cutter to cut the hole out and cut it to size
I honestly dont remember it's some cheap stuff of Amazon or something I still have a full roll of it it wasn't good ..I have used oracal ht55 for over a yr now... nothing else
Thank you so much yes I really like the transfer paper I'm using from Amazon but it only works for car decals it seems like when I want to put it on stuff like phone cases were laptops or things like that the transfer paper is too sticky I'll try though the one that you just mentioned. I'm watching videos of your able to put the decals on stainless steel water bottles but when I'm trying to put them on hydroflask they're not working I only make t-shirts but sometimes when I need to I make decals and so I'm trying to make these decals for a business and I'm just trying to get them to stick to hydroflask
@@megc4674 yeah that oracal ht55 is good all around sticky enough where you dont have to fight it to get off the backing paper but will release from the transfer paper on really any surface easily. It's great for everything even walls which is one of the hardest thing for vinyl to stick to.
All American Arts MN Thank you also im thinking on buying the Us cutter SC2 Vinyl Cutter Starter Kit for Laser-Assisted Contour Cutting is the software you are running the basic or another #newtothegame #looking4insite
Donny Olivera mine came with my cutter ..its the basic . There is more advanced softwares but i havent ran into anything i wasnt able to accomplish with it.
@@Joey-id3rk I learned everything on a silhouette cameo but out grew that right away ..I would say go with something 24 inches atleast if you are trying to really make some money not just do little decals . As you see I use mine for so much stuff like stencils for signs , vehicle graphics, apparel..12 inches is just not big enough for me but if your doing little decals stuff for like cups it might work out for you ..At the time I bought my Laserpoint 2 I think it was maybe a 150 bucks more than a cricket or silhouette way worth the extra money
Most folks need a perfect set up to present their work. Your awesome design, and the fact you shared how you got er done is appreciated.
Much appreciated 🙏
Major props for replying to pretty much everybody that has a question. Thanks you earned a sub. Great work btw.
Thank you for watching...I do my best
I love how you use the razor blade on your hardwood floors. That's just stellar.
Robert Blackburn lol I had a pipe explode and wreck my floor so I planned on putting carpet on it, but it makes such a good work bench for big decals
are you the hard wood floor Nazi ?
I like how you jumped to a conclusion... the WRONG conclusion. That's just moronic and rude.
I really liked this video! Thanks for the ideas. I never thought of doing multi-colored cutouts using that technique. I appreciate you sharing your ideas and artwork! I think everyone can learn from one another, even when we see mistakes we have made or others have made, it helps with our next project! I appreciate you showing a "TRUE" representation of making this decal from start to finish, even pointing out what you did wrong. That was helpful to me if I ever have to work on sheetrock. Thanks again!
Your very welcome thanks for watching and for the comment much appreciated
Well I found that useful l like the way you work in the space available a real person doing real things just getting on with it I have a lot of respect for you my friend keep on keeping on ...
Thank you for that comment!!
I have seen several how to videos, and I enjoy yours quite a bit. Thank you for taking the time to post them.
Thanks for watching and also for the nice comment.
Love this video it has really helped alot on layering decals only thing I ever see is cricut so thankful I found this video!!
You make it look easy…
I am sure it a challenge but totally doable for us beginners…
Great video…
Anyone can do it , few mess ups here and there but it's easy to learn !
you are very skilled and talented.i admire your artwork.keep it up i like that design
Much appreciated thanks for the kind words and for watching!!
Thank you very much this really helped me on how to create things and install with a vinyl cutter, Much appreciated Thanks 👍 👍 👌 👌.
Thank you for watching, happy to help !!
Your videos are very helpful! Keep up the good work and I will continue to watch. THANKS!!!
jhchome52 thank you i will make more vinyl videos soon
Hey dope video good stuff great work
im in the same trade I know every machine is different but at what speed and pressure do you have yours at
I love you work man! Can you help out and tell us what materials u use by putting links?
Great job, Would you mind sharing what software program you are using?
Vinylmasters
ty this was helpful for learning.
wow!! this flag it's so nice!! what kind of vinyl cutter and software do you have? thank you in advance
Nice video please help were is your speed and pressure set at? Thanks
My speed i normally run at 500mm/s pressure varies with different material..get a couple circles on there and do some test cuts tell its dialed in were it comes off backing paper well but doesn't cut into backing paper
Thank you
Hey where do you get your transfer tape and vinyl? Awesome video and your super quick I hope to get there someday!
I buy from both Uscutter.com and Signwarehouse.com. I use oracal the most 651 vinyl and Ht55 transfertape unless I need a color or something that's not an option.
Your videos are always so helpful. Are you still doing vinyl cutting? Have you ever used a vinyl inkjet printer/cutter?
Thank you !! Yes I am still doing vinyl . Have not used a cutter/printer but my machine does it with registration Marks...its just harder using two machines to do it .
Looks awesome. Which version of Vinyl Master are you using..Cut, Master...etc?
Digging your videos man, great stuff. Having a hard time hearing you a lot of times though, even when using my bluetooth speakers to boost the volume
Love the video. Very very helpful. I was wonder exactly what cutter you use and what software you use. Also what kind of vinyl do you use?
Dylan Woodward US cutter , vinyl masters software and oracal 651 vinyl ....papilio vinyl is really good stuff if you only need 12inch rolls
All American Arts MN what is the model of your machine?
Dylan Woodward its a lazer point 2
All American Arts MN thanks man. Keep up the good work.
Sweet video. I imported a picture ,vectorized and cut it. I didn't see the fine detail till it started cutting at which time it tore holes in the vinyl. When vectorizing what settings work best? I use the same software
what kind of vinyl do you use to create your decals? I am currently doing heat transfer vinyl shirts but it doesn't make sense to me to use that vinyl for a car decal....any suggestions?
I use Oracal 651. I am going to try colored ones...this is new! I have always just done White or Black.
Helpfull video thanks. What type of vinyl did you use for this video?
Daniel Valdivia oracal 651
I've been wanting to get into it as a side hobby (just adding yet another one) and doing small scale vinyls for friends etc. I have been looking at the 28" Titan 3 and all the different vinyls but I'm also not sure which software to get, I have a iMac and a PC laptop. Thoughts/opinions on what you use?! Great video, screw what others say.
If you are wanting to do small scale things, might I suggest a cricut explore air 2. You can get kits on amazon with everything you need to start for about $290. It comes with an easy to use software. And settings for different materials. I have one myself and I can't recommend it enough.
What cleaner do you use to prep the area that your going to install the vinyl?
Can vinyl master be used with any plotter? If yes, then how to purchase it? I am from India! Your response would be appreciated! Thanks!!
I am not to sure on that , I would contact vinyl masters and see .. other wise I know sure cuts alot software is alot similar to ..but I also dont know if that's good for multiple machines
@@AllAmericanArtsMN thanks for the reply. Will be waiting for your response again!!!
Help!!! Why when i vectorize it has a big X across the White and its not seeing the white when i go to cut and separate the colors?
epoweredrc just got a click on that white with the X ,That will make it so it Picks up the white as a vector color.. A lot of times it does that because the background Is normally white
I want to try this, I like to cut off my vinyl, even if it is a small piece. I do not like to waste this stuff. Do you ever do that
Not really anymore I had so many scraped around I never used I normally just trow some random stuff on if I'm not in a hurry to fill gaps
I was going to get a vinyl cutter to make airbrush stencils, do you have a video on stencils or can you make one
I
Hello, I have a logo that I’m looking for some decals at multiple sizes. Is this something you can do?
what software u used
Will the 31” make a cornhole wrap to cover the face of a cornhole set? Thanks for your helps and for responding
Rontae Moyer it is just a cutter so you would have to layer vinyl if you wanted it to be multicolored like in my video , a lot of those vinyl wraps that you see online are printed vinyl so it's only one layer you run it through the printer then you put it in the cutter to cut the hole out and cut it to size
Nice job!
Thank you!!
Great video!! What transfer tape is that?
I honestly dont remember it's some cheap stuff of Amazon or something I still have a full roll of it it wasn't good ..I have used oracal ht55 for over a yr now... nothing else
Thank you so much yes I really like the transfer paper I'm using from Amazon but it only works for car decals it seems like when I want to put it on stuff like phone cases were laptops or things like that the transfer paper is too sticky I'll try though the one that you just mentioned. I'm watching videos of your able to put the decals on stainless steel water bottles but when I'm trying to put them on hydroflask they're not working I only make t-shirts but sometimes when I need to I make decals and so I'm trying to make these decals for a business and I'm just trying to get them to stick to hydroflask
@@megc4674 yeah that oracal ht55 is good all around sticky enough where you dont have to fight it to get off the backing paper but will release from the transfer paper on really any surface easily. It's great for everything even walls which is one of the hardest thing for vinyl to stick to.
I so appreciate your help! That's what I struggle with is the dang transfer paper! Your decals look really great!
I love USA♥️🇺🇸♥️
From Serbia
Thanks !!
What Kind of transfer tape are you using?? Thanks Jeff
In this video a cheap Amazon that was no good ...I just use oracal ht55 now
That software works on gcc Jaguar?
No idea what that is ?!?
You said you are using Vinyl Master but which level - Cut; Ltr or Pro?
Must be Cut , what comes free with it
you fucking brilliant thanks alot
What size vinyl are you using?
24inch in the video
Dude . My knees wouldn't be happy doing that on the floor. No table?
Tyler Collier lol not big enough for most things
my knees would not handel that either
or my back
The vinyl your using can it be used on tee shirts also?
Donny Olivera no you would want heat transfer vinyl for that , this is just adhesives vinyl for signs, windows and walls ext...
All American Arts MN Thank you also im thinking on buying the Us cutter SC2 Vinyl Cutter Starter Kit for Laser-Assisted Contour Cutting is the software you are running the basic or another #newtothegame #looking4insite
Donny Olivera mine came with my cutter ..its the basic . There is more advanced softwares but i havent ran into anything i wasnt able to accomplish with it.
Can it b use on cornhole as a wrap
Rontae Moyer yes I have made many cornhole boards and put decals on them
good work buddy
nate urb... hey thanks man
beast ass decal MERICA
What software are you using to separate the colors?
Gary Crumrine vinyl master
what is that clear paper call ?
eddie chillz transfer paper/tape
and you want to use low tack tape
So many plays the volume wore out D:
Lol
Dude are you really cutting this on your hardwood floors?
Yeppers
Software?
Motty Ruttner vinyl masters
#yissal
thats a lot of wasted vinyl
What sign master version is that
what program are you using?
what program are you using?
Vinyl masters
All American Arts Ok would you recommend the cricut or us cutter? I’m a complete rookie
@@Joey-id3rk I learned everything on a silhouette cameo but out grew that right away ..I would say go with something 24 inches atleast if you are trying to really make some money not just do little decals . As you see I use mine for so much stuff like stencils for signs , vehicle graphics, apparel..12 inches is just not big enough for me but if your doing little decals stuff for like cups it might work out for you ..At the time I bought my Laserpoint 2 I think it was maybe a 150 bucks more than a cricket or silhouette way worth the extra money