TAPER ANGLE | HOW TO FIND TAPER ANGLE | GATE | METAL CUTTING

#modimechanicalengineeringtutorials,
#mechanicalmagicmechanicallearningtutorials,
In this video easy explanation of how to find taper angle? Calculation part of Taper angle.
_______________________________________________________________________________________
Welcome to My TH-cam Channel
MODI MECHANICAL ENGINEERING TUTORIALS.
This channel is Containing of fundamental concepts of Mechanical engineering.
In some videos passing trick of subjects of engineering, passing tricks for GATE,PSU,UPSC,GPSC etc…. examinations.
Subscribes, like and share
In My Channel Easy explanation about more Mechanical engineering concepts, which are really helps you in your future.So,
Subscription Link: / @modimechanicalenginee...
Prof. Mayur S. Modi
_______________________________________________________________________________________
Other Importance Links : Metal Cutting Operations
Types of Work Holding Devices | T- Bolt | V - Block Clamping
• Types of Work Holding ...
Cutting Tool materials | Properties | Cutting Tool | Selection of cutting Tool
• cutting tool materials...
Types of Tool Wear | Crater Wear | Flank Wear | Factor affecting Tool Wear | Crater Vs Flank Wear
• tool wear | Types of T...
Single Point Cutting Tool |Tool Signature| Nomenclature
• single point cutting t...
Grinding wheel Standard Marking System
• grinding wheel Standar...
ORTHOGONAL TURNING | CUTTING FORCE | SHEAR FORCE | C-40 STEEL
• ORTHOGONAL TURNING | C...
ORTHOGONAL TURNING | CUTTING FORCE | SHEAR FORCE | C-40 STEEL
• ORTHOGONAL TURNING | C...
SHEAR FORCE CALCULATION | CUTTING OPERATION | METAL CUTTING | SHEAR ANGLE | CO EFFICIENT OF FRICTION
• SHEAR FORCE CALCULATIO...
TAYLOR'S TOOL LIFE EQUATION | TOOL LIFE | EFFECT ON TOOL LIFE
• TAYLOR'S TOOL LIFE EQU...
TURNING OPERATION| POWER CONSUMPTION | SPECIFIC CUTTING ENERGY| GATE
• TURNING OPERATION| POW...
___________________________________________________________________________________
Other Importance Links: Mechanical Measurement and Metrology
Comparators | Application |characteristics
• Comparator explained |...
Effective Diameter by Two Wire Method
• Effective Diameter by ...
Best Wire Size Method | Effective diameter | Screw thread
• best wire size for thr...
Classification of Fits | Types of Fits | Definition | Clearance |Interference |Transition
• classification of fits...
Clearance fit in details | Classification of fit | Metrology | Mechanical Measurement
• clearance fit | types ...
Interference fit | Explained |Mechanical Measurement | Metrology
• Interference fit | typ...
Transition fit | Classification of fit | Mechanical Measurement | Metrology | GATE
• Transition fit | Class...
Allowance | Difference between Allowance and Tolerance | Mechanical Measurements.
• Allowance | Difference...
Hole and Shaft Basis System | Clearance fit | Interference fit | Transition Fit |Metrology
• hole basis system and ...
Tool life | Taylor's tool life equation | GATE
• Tool life | Taylor's t...
ORTHOGONAL CUTTING | OBLIQUE CUTTING | BASIC METAL CUTTING
• ORTHOGONAL CUTTING | O...
TYPES OF CHIPS IN METAL CUTTING | CONTINUOUS AND DISCONTINUOUS CHIPS
• types of chips in meta...
Full Theory of Chip thickness Ratio in Metal Cutting| Production Technology | Manufacturing process
• chip thickness ratio |...
HOW A CHIP BREAKERS WORK |TYPES OF CHIP BREAKERS | CHIP BREAKERS IN METAL CUTTING |
• HOW A CHIP BREAKERS WO...
Lathe machine operation Facing, Turning, Grooving, chamfering, parting off, Drilling and knurling
• lathe machine operatio...
Feed, Speed, Depth of Cut and Machining Time for Lathe Machine | Machine Parameters
• feed speed depth of cu...
Properties of Cutting Fluids | Requirements of cutting fluids | Soluble oil | cutting oli |
• types of cutting fluid...
TYPES OF CAST IRON | PROPERTIES OF CAST IRON | GREY CAST IRON | WHITE CAST IRONS |DUCTILE CAST IRON
• TYPES OF CAST IRON | P...
METALS | ALLOYS | TYPES OF METALS ALLOY | STEEL | CAST IRONS | CLASSIFICATION OF METAL ALLOYS
• METALS | ALLOYS | TYPE...
ALLOYS | HOMOGENEOUS MIXTURE | PROPERTIES OF ALLOYS| USES OF ALLOYS | SCIENCE
• alloys and their compo...
TYPES OF WELDING | ARC WELDING | GAS WELDING | RESISTANCE WELDING | GATE | IIT
• Video
7 WASTE IN MANUFACTURING | LEAN MANUFACTURING | JUST IN TIME | INVENTORY CONTROL | GATE | IIT
• 7 wastes in manufactur...
Jigs and Fixture |Difference between Jigs and Fixtures| Work Holding Devices | Jigs | Fixtures |
• jigs and fixture |Diff...

[@gymlover8874]

I think you forget to take the tan inverse of 0.05.

[@mariojacob363]

0.05=2.8

[@robert3325]

Try layman's terms???

[@keddah_ismail]

What are other angels to be found ,?

[@aKaCrowley]

what is the standarise solution to that 0.05

[@lumaxjai]

Please clear this I want to know solution

[@modimechanicalengineeringt8780]

Find the angle at which compound rest is to be set???

[@sankardey4594]

thanks.

[@modimechanicalengineeringt8780]

Thank sir
Subscraibes, like and share
Keep watching.....

[@and1globetrot00]

Lol "small d"

[@ajazkhan4380]

Hindi.nahin.aati.hai.kya.