XEROX WorkCentre Scanner Unit & removing the Glass

How to replace lamp CCD unit in copier xerox workcentre
Jak zdjąć szybę i wyczyścić lutsro lampę optyki
Cleaning Procedures:
Switch off the power.
Using the optical Cleaning Cloth, clean the front and rear of the Document Glass, Document Cover, White Reference Strip, Reflector, and Mirror.
Clean the Exposure Lamp with a clean cloth and Film Remover.
Clean the Lens with Lens and Mirror Cleaner and lint free cloth.
TH-cam SUPPORT: / @mrricoh
PATREON: / copyexpertmoviestudio
PATRONITE: www.patronite.pl/1796
📽Camera: CANON EOS250D
🎬 Plan lighting: Sachtler Reporter 200D
🎤 Microphone: Trust GXT 252 + Emita Plus Steraming
💻 Movie editing program: WonderShare Filmora
Copier parts www.copy-expert.pl/
Facebook: / copy-expert-1134316788...
Used copier parts www.copy-expert.com/
Are you interested in cooperation? That's good.
📧 Please contact: [e-mail]

[@daryishinsylva9346]

hi sir my xerox machine kyocera FS-MFP have problem in the lamp .... the machine alert scanner error/lamp error... what can I do... hope you help me

[@MrRicoh]

First check if the optics are not blocked, there is often a yellow switch on the left side and you have to release it

[@aleem1746]

how can we change the scanner carriage wire of this model

[@MrRicoh]

Are you my subscriber?

[@zeeshan05695]

I did has u showed but also same problem

[@MrRicoh]

Thank you and invite you to subscribe to my channel. For me it's very important.

[@mr.hi-tech786]

AoA sir how we can Scanner Unit & removing the Glass of xerox 5855 Workcenter plz guide boss

[@MrRicoh]

Wpisz na naszym kanale SZYBA XEROX

[@vijaym8341]

5775 same unit 5855 remove

[@digambarchavan7166]

xerox Work center 7835 scanner scanning but scan file is black and print also black please Give me

[@MrRicoh]

Perform a thorough cleaning of mirrors and scanner windows.

[@MohsinKhan-mv4cz]

Hello Dear,
i have xerox 5755, and i m facing problem "the scanner has failed to initialize", please tell me what i need to do, to clear this issue.

[@MrRicoh]

www.fixya.com/support/t26295031-scanner_failed_initialize_error_in_xerox

[@dilnawaz7]

Hey tomaz h r u. Sir i have some issue with my xerox 5775. When i print in landscape then the end area of print is fade and rest print is good.but in potraite the print is ok. So what will be the pro.

[@MrRicoh]

In my opinion, you have to do the easiest thing - clean the glass at the Laser Unit, unless you have a special cleaner in the copier. If this does not help, check if DRUM UNIT is not used anymore.

[@dilnawaz7]

@@MrRicoh thanks sir...i have just clean the drum unit assembly (long strip) n then the fault gone....😊

[@moonstar3340]

wc 5335 scanner cable error

[@MrRicoh]

Wow, that's very strange, I didn't have that problem.

[@rajumohan1986]

Scanner fault error

[@MrRicoh]

napisz coś więcej jaka maszyna ? jaki kod?