It is a common assumption that al ICs are digital. However, this is not the case. They can also be analog, which is what we use. (Many of the popular analog pedals also use analog ICs, such as Boss, Tube Screamer, etc). The statement at the beginning of the video is "The SansAmp PSA has 100% analog circuitry for its signal path..." is accurate. The signal does not go through any A/D to D/A conversion. We use digital components only for the memory.
You have the SansAmp PSA-1. In 2005, we introduced the SansAmp PSA-1.1, which has some additional features, one of which is the Trim knob. It is a master volume control that raises or lowers all presets the same amount.
Depends which model. If you are talking about the original PSA-1, you can use a footswitch to scroll through however many presets you've indicated in the Loop Count, or you can use a MIDI footcontroller. With the newer PSA-1.1, you can only use only a MIDI footcontroller. (We happen to have two, btw: the MIDI Mouse and the MIDI Moose.)
@SSaudioworks. It would be a matter of opinion if it could "beat" a JC120. Once you're "sparkling clean," you're "sparkling clean." The difference is that our "sparkling clean" will still have some Fender-like tube emulation, as opposed to the JC120's solid-state tone.
@derdude The unit was designed for direct recording so you don't have to go through the hassle of mic'ing a cabinet. While some people might still prefer to do it that way, either way is "proper." It's really a matter of preference. Very happy you love it, btw!
I keep buying guitar amps in an attempt to find one that sounds as good as my PSA 1.1 based system (a bit of an odd-ball setup with PSA 1.1, an Alesis NanoVerb for Reverb, a MarkBass LittleMark III head for final EQ/power and an Avatar Vintage 212 (V30 clone and a Celestion G12M70), and it hasn't happened. Marshall, Fender, Mesa and I found my beloved '70s Nugent-tone by tweaking the Bluesbreaker patch! Amazing array of tones hiding in a little silver 1U tone vault!!! Thank you Tech21!!!
Into the amp's front input, with the PSA's 1/4" Output set for -10dB instrument level (like it's a pedal). Or into the amp's power amp input, with the PSA's 1/4" Output set for 0dB line level (REPLACES the amp's preamp section). Or from the amp's effect send into the PSA's REAR input, with the 0dB pad engaged (to lower the level coming in), and PSA's 1/4" Output set for 0dB line level to amp's power amp input (same as ex. #2). There's barely one watt of power coming from the PSA.
Since the SansAmp PSA offers tube amp emulation, using a tube power amp could possibly add too much compression. Typically we recommend a solid state power amp with at least 100 watts of power, which should have enough clean headroom to amplify your tone without coloring it further or adding additional distortion.
Oh thanks! Great tip! I didn’t know that it essentially had the sound(compression/saturation etc, of a power amp already built in. Probably a dumb question, but there’s obv no way to turn off or bypass the Power Amp sound (I say sound because as you say, it’s not an actual power amp, but just the sound of tube PA compression)!?
@@jamescassidy4045 The SansAmp circuit is designed to emulate a tube amp in it's entirety. Preamp, power amp distortion as well as speaker emulation. There is no ability (or need to bypass) the power amp stage distortion. We generally recommend running our SansAmps into a clean platform whether a solid state/tube power amp as well as directly to a mixer.
@@Tech21nyc Oh right, nice, and speaker too huh, that awesome! As for the power amp, ya totally, I see! I knew you werent saying "only" a SS PA lol. Thanks for taking the time! Im actually still waiting from Canada Post to receive it so cant wait, Ive wanted one for years!
It's just you. The Tech 21 PSA 1.1 sounds amazing. PODS and digital preamps of that ilk have bamboozled many guitarist's ears into believing that guitar tones must sound like MIXED ALBUMS to be considered "good." If you like how MIXED guitars sound and you want your guitar tone to sound like a MIXED GUITAR (and not a normal guitar amp) then invest in a POD, Axe FX or one of the half dozen or so multi-pedal digital preamps on the market. The Tech PSA 1.1 is a fantastic analog preamp.
With the original SansAmp PSA-1, there is a special page function to set the loop count (for any number of presets). You would copy & paste your 2 presets to sequential locations, then use any momentary footswitch to shuttle back and forth. With the newer SansAmp PSA-1.1, you can still move the presets sequentially, but you would need to use a MIDI footcontroller. (Check out our player-friendly MIDI Mouse or MIDI Moose.) For more help, please contact us via our website.
@Cyberdemon All SansAmps are designed for direct recording. The speaker sim is incorporated into the circuitry and is designed to deliver the appropriate speaker for the designated setting. The SansAmp PSA gives you fairly detailed emulations of each of the Character Series pedals, but the pedals go into even greater detail of each amp style. Overall, you have much more flexibility with the PSA and you can save your favorite settings. It's a matter of your preferences and budget.
When you tweak the knobs, the display will blink to let you know you've changed its position. It's very simple, though to find where a particular knob was set for any given preset. Full instructions are provided in the owner's manual.
@nunoinocencio There are two 1/4-inch inputs, one on the front and one in the rear. This way you can incorporate the SansAmp PSA into a rack or patch-bay setup. The front input overrides the rear input which allows you to bypass other gear that may be in the chain.
Adding a distortion device to a live vocal guarantees there will be feedback. You can try to add gates to the signal path, but it probably won't eliminate everything.
@davem04ify, Yes you can. It's designed for direct recording, where playback is through full-range speaker systems, and is equally at home in live performance through a full-range PA.
@Michael White, We aren't aware of any forums where people share their presets. Maybe you should start one on GearPage! In terms of the differences, the PSA-1.1 has 30 more user locations, a headphone output, an on/off switch on the front of the unit, and a Trim ("master volume") control for global level adjustment.
@okantuncer1, It's difficult to figure out if you're doing something wrong without knowing more, but it shouldn't sound "fizzy." We recommend cleaning the jacks first. Spray some DeOxit or similar electronic component contact cleaner (not WD-40) in the jacks and then vigorously jam a 1/4" cable plug in and out a dozen times. If that doesn't solve the fizz, I recommend contacting us directly via phone or email to discuss further options.
@synthelabo It is direct out. We did connect it to the Power Engine 60 in our other video, which also went direct out from the cabinet. Nothing was miked.
No... there are Low and High EQ controls for Bass and Treble. Buzz, Punch and Crunch affect low, mid and high frequency distortion, tonality and harmonic content. Those are the aspects that make Fender break-up different from Marshall break-up, from MESA/Boogie break-up, from Ampeg break-up, etc. It's also why you're able to emulate so many different types of amps with one product.
I wouldn't be so obsessed with analog stuff anyway. There are some really good digital modelers to try too. They are really good today, because of cheap powerful DSP processors. They can get pretty close in proper hands. You can hear it in hundreds of clips on YT. Tubes and analog gear will be always most desired of course.
@pentagonoenllamas The SansAmp RPM will offer a bluesy lead tone, like a cranked up '60s Fender or Ampeg amp. It won't get into Marshall overdrive territory, but it will certainly accept overdrive/distortion pedals very well if you want that kind of gain.
@LeonGrinberg The PSA is an analog preamp with no built in effects (other than EQ.) The MIDI capability allows you to save presets and combine the unit with a MIDI effects unit for a super versatile guitar rig. I use a Rocktron Xpression in the effects loop of the Tech 21 PSA with excellent results. The preamp doesn't "eat" guitar tone whatsoever. The Tech 21 PSA will NOT sound or "feel" like a digital POD/Axe FX/AmpFarm-type software plug-in for better or for worse.
@HoursUponEndOfficial. Not sure exactly what you mean by "the real thing." The software, obviously, is digital vs. the hardware, which has an all-analog signal path. You might want to get one and see if you like the hardware better. Some people run their tracks through a SansAmp (pedal or rack) in mixdown to warm it up. If you have one, try that. Good luck!
@PeaElAre, indeed it can. You can download the owner's manual on the Support page of our website (tech21nyc) for full details. Just be sure to choose PSA-1.1. If you need further technical assistance, you should email us directly.
Interesting bit of kit... the guy freaked me out at 5:14 though! Tech 21 gear is very tempting as an alternative to digital modelling. I heard a Tech 21 Trademark 60 demo'd last night at a guitar workshop... VERY impressive.
@MonolithDeathcultHQ: I understand you have been in touch directly with our customer service dept and they are handling this. Just wanted other TH-camrs out there to know we're not ignoring you! Any time there's an issue with product performance, it's always best to email us directly, as it usually takes several rounds to narrow down the problem. Thanks!
Can we see some bass demos with the PSA I know a few big players use them. Phil from taproot uses it. I'm currently using the RBI as my main tone with the GT2 for distortion here and there not a whole lot of distortion though mainly intros and stuff. Love my RBI by the way
@chickabuka You should contact us directly, as it's not a short answer. And, no, the SansAmp PSA does not have effects. You might want to check out our Boost D.L.A. and Boost R.V.B. pedals, though. :-)
@okantuncer1, we'd also recommend decreasing the High control to see if that makes a difference in the fizziness. Again, it's best to contact us directly so we have all your info and then we can give you the best advice.
I find that my PSA (original version, bought it in 2000) sounds better thru a clean guitar or bass amp than it does thru a PA or a keyboard amp...You can hear the fizziness of that sort of setup in this vid. But with an amp, it absolutely rules!
If you mean, SansAmp PSA into side A of an A/B box, and another preamp into side B, with the common output feeding a power amp and speakers, I don't see why not.
In the end, all that matters is you are happy with what you are hearing, be it analog, digital, tubes, whatever. BTW, we are proud to be celebrating the 20th Anniversary of the SansAmp PSA.
It is possible, but there are other factors we would need to know --such as type of guitar, what you're plugging into (amp or power amp), etc. I would encourage you to call or email us (see website for contact info) so we can give you the best advice.
@Zhorellski It depends on the power amp's input(s). If it has 1/4" inputs, use the PSA's 1/4" outputs. If it has XLR inputs, use the PSA's XLR outputs. If it has both, choose either (it makes no difference). The speaker simulation is always on... you can't turn it off.
We ship our products with the proper voltages to each of our international distributors. If you require additional information for your particular country, I suggest you email customer service through our website.
OK, thanks. I'll try to record a sample and e-mail to you. The "fizz" I'm talking about is more like when you play a distortion pedal through hi-fi speakers.
@aclaar877, sorry you are having a problem. I suggest you contact us directly via phone or email, which you can find on our website, tech21nyc. It can sometimes take several emails to pinpoint what needs to be done.
I've had a PSA-1 for several years now and I love it but for DI the built-in speaker simulation doesn't impress me - doesn't seem to do much more than un-alka-seltzer it leaving it a bit lifeless - I DI mine through an ADA Microcab.
@BluesMannus, great video. Well done! Thanks for posting. We will post on our FaceBook page. But, y'know, everyone is going to want to know what settings you used for each of those sounds... ;-)
I have the PSA1 love the clean tones. Having trouble finding a good distortion setup that I like.Are there any forums for presets? BTW what's the difference between the PSA1 and the PSA1.1?
i love the twang you can get out of this one. wish it had a tad bit of low end and just a tad less of overdrive. i'm sure it's able to happen via that pedal.
@@kennyh5083 I mean the fact that I said that I am sure that it can happen with that pedal? Naturally this would be using EQ. Lol. Not quite sure what your getting at here.
Only reason I know this tech 21 is good, I have it set up on my computer with my pro tools program, didnt even know it was in there, found it by accident, the sound is beyond great, im just kinda lost on what i need exactly to play one like you are showing, could u offer me some set up advice , what do i use with the pre amp for say a small band, does this model have delay and reverb, thanks in advance. Gary
Why don't you guys make the TRI AC anymore ? It was such a success i'm considering buying myself another one just for spare parts The TRI AC sounds so much better than this one especially in the high-gain settings ..
Excellent demo! It's such a contrast to most TH-cam "demos" where tyros try to titillate other cases of arrested development with their Neanderthal neophyte noodling. Nice to hear an experienced PRO player runs through a variety of MUSICAL samples quickly! I'm a long-time fan of sansamp products. My original sansamp is over 20 years old and still works beautifully. I got the GT2 in 2007. That's a GREAT thing to carry in your gig bag for emergencies or just use in front of any amp, especially when you have to use a questionable backline or rented gear. I bought several of the character" series pedals. They're friggin GREAT for sessions! The producer or engineer says he wants a Marshall, or Vox, or Twin, or Hiwatt or Mesa sound. I reach in the bag, pull out the appropriate pedal and BINGO! He gets what he asked for, then I get paid plus call-backs. All the sansamp stuff I have so far is MONEY... They pay for themselves fast. Because of this demo, I sprung for the psa1.1 about four years ago. Combined it with the digitech GP1000 preamp which i use only for its nice effects and midi control. ALL the raw analog tone comes from this thing, Power from a QSC amp. It's a slick rig! Consistent awesome tone on any night, any venue. Reliable as Bill O'Rielly lying. The whole shebang fits neatly in the trunk of a Civic, and rolls in its rack case. The only lifting I do is in and out of the car, unless there's some friggin stairs, then I get union help or find a manly monkey as mule. Union stage hands, scabs, airline baggage handlers and drunk roadies have (so far) failed to destroy it. I'd buy one of those nifty fly rigs too, IF it was stereo and IF it had the cat-5 cable power like Richie Kotzen's. HEY TECH 21! Are ya listening? WE WANT STEREO OUTs and CAT 5 Cable-power convenience! Peace.
I'm seriously thinking about selling my Randall MTS tube rig and trying one of these. I'm so sick of lugging around these heavy ass amps, breaking my back and still having an amp I'm not happy with.
ive been using the psa1 for a long time - it can produce a variety of distortion sounds to be used in modern metal stuff, dropped tuning etx. but he didnt produce those in the video, probably also because he uses no metal axw ya it works but a good tube (pre)amp is unbeatable right? remember, it is still IC circuits and not "real" analog sound! a bit misleading what he says...
Hey, Sounds GREAT ! but does it have a footswitch? Since you've stopped producing the TRI AC (which I own and enjoy) I can't find anything similar ... Please answer tech21 :)
@Tech21nyc I'm between this and character series pedals. ¿Which is better for direct recording? ¿How many different speakers can I sim with PSA? ¿SansAmp PSA = All Character Series together?
...and what a great Video! I got this little monster and i'm really happy, i just want to know why when i put a tube screamer in front it makes so much noise, i dont have any other pedal just a tube screamer only for BOOST, (BTW sounds extremely PERFECT with a good tube screamer) i dont know if the ''problem'' is at my PSA or in any other, thanks in any case.
It might be best to contact our customer support department for this question. (info@tech21nyc.com ) There are a number of factors. It usually comes down to gain staging and signal to noise ratio.
@@Tech21nyc After i send my question i connect my booster at the rear input....no noise... nothing....i connect and my wah wah....no noise....propably my front input has a problem because I bought it used. Thank you for your time in any case!
I really like my PSA-1 - my bandmates noticed a warmer sound when I used it at practice, and for bass it really makes it come to life. But, I have a problem - after a few minutes of play, it starts clicking, which is the sound it makes when you move a dial off a preset. I've read that vibrations can throw it off a preset, and I've also pulled out all the dials which you recommended via email. It's not on top of an amp, either. Other suggestions? Any chance you could swap it out if I return it?
because I have never used a preamp b4 does this plug in from the from the front or just thru the power amp section on the back of an amp or thru a effect loop.How many watts does it push.I have a Peavey Stereo chorus 400 head
Hi, I have a PSA 1.1 I'm using for years. While I'm happy with it, It noway sounds similar to this video recording direct, it's always "fizzy". So I resorted using an external cab simulator. Am I doing something wrong?
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](http://i.ytimg.com/vi/wo6r9TgausI/mqdefault.jpg)
It is a common assumption that al ICs are digital. However, this is not the case. They can also be analog, which is what we use. (Many of the popular analog pedals also use analog ICs, such as Boss, Tube Screamer, etc). The statement at the beginning of the video is "The SansAmp PSA has 100% analog circuitry for its signal path..." is accurate. The signal does not go through any A/D to D/A conversion. We use digital components only for the memory.
Finally got my first SansAmp PSA1!!! I’ve waited for this for a long time! Tech21 NYC rocks!!!!
I'm using this fantastic unit for more than a decade, everyday, for guitar and bass. It's awesome.
GREAT demo!
Classy playing, peppered with classic rock madness and classy jazz tones, all in one box
All Analog and Awesome. I bought one.
You have the SansAmp PSA-1. In 2005, we introduced the SansAmp PSA-1.1, which has some additional features, one of which is the Trim knob. It is a master volume control that raises or lowers all presets the same amount.
Depends which model. If you are talking about the original PSA-1, you can use a footswitch to scroll through however many presets you've indicated in the Loop Count, or you can use a MIDI footcontroller. With the newer PSA-1.1, you can only use only a MIDI footcontroller. (We happen to have two, btw: the MIDI Mouse and the MIDI Moose.)
@SSaudioworks. It would be a matter of opinion if it could "beat" a JC120. Once you're "sparkling clean," you're "sparkling clean." The difference is that our "sparkling clean" will still have some Fender-like tube emulation, as opposed to the JC120's solid-state tone.
I still have my PSA-1 since I bought it new in mid 90s, now it's my time machine.
@derdude
The unit was designed for direct recording so you don't have to go through the hassle of mic'ing a cabinet. While some people might still prefer to do it that way, either way is "proper." It's really a matter of preference. Very happy you love it, btw!
I keep buying guitar amps in an attempt to find one that sounds as good as my PSA 1.1 based system (a bit of an odd-ball setup with PSA 1.1, an Alesis NanoVerb for Reverb, a MarkBass LittleMark III head for final EQ/power and an Avatar Vintage 212 (V30 clone and a Celestion G12M70), and it hasn't happened. Marshall, Fender, Mesa and I found my beloved '70s Nugent-tone by tweaking the Bluesbreaker patch! Amazing array of tones hiding in a little silver 1U tone vault!!! Thank you Tech21!!!
Into the amp's front input, with the PSA's 1/4" Output set for -10dB instrument level (like it's a pedal). Or into the amp's power amp input, with the PSA's 1/4" Output set for 0dB line level (REPLACES the amp's preamp section). Or from the amp's effect send into the PSA's REAR input, with the 0dB pad engaged (to lower the level coming in), and PSA's 1/4" Output set for 0dB line level to amp's power amp input (same as ex. #2). There's barely one watt of power coming from the PSA.
Since the SansAmp PSA offers tube amp emulation, using a tube power amp could possibly add too much compression. Typically we recommend a solid state power amp with at least 100 watts of power, which should have enough clean headroom to amplify your tone without coloring it further or adding additional distortion.
Oh thanks! Great tip! I didn’t know that it essentially had the sound(compression/saturation etc, of a power amp already built in. Probably a dumb question, but there’s obv no way to turn off or bypass the Power Amp sound (I say sound because as you say, it’s not an actual power amp, but just the sound of tube PA compression)!?
@@jamescassidy4045 The SansAmp circuit is designed to emulate a tube amp in it's entirety. Preamp, power amp distortion as well as speaker emulation. There is no ability (or need to bypass) the power amp stage distortion. We generally recommend running our SansAmps into a clean platform whether a solid state/tube power amp as well as directly to a mixer.
@@Tech21nyc Oh right, nice, and speaker too huh, that awesome! As for the power amp, ya totally, I see! I knew you werent saying "only" a SS PA lol. Thanks for taking the time! Im actually still waiting from Canada Post to receive it so cant wait, Ive wanted one for years!
It's just you. The Tech 21 PSA 1.1 sounds amazing. PODS and digital preamps of that ilk have bamboozled many guitarist's ears into believing that guitar tones must sound like MIXED ALBUMS to be considered "good." If you like how MIXED guitars sound and you want your guitar tone to sound like a MIXED GUITAR (and not a normal guitar amp) then invest in a POD, Axe FX or one of the half dozen or so multi-pedal digital preamps on the market. The Tech PSA 1.1 is a fantastic analog preamp.
@BluesMannus
Thanks for the post BluesMannus!
With the original SansAmp PSA-1, there is a special page function to set the loop count (for any number of presets). You would copy & paste your 2 presets to sequential locations, then use any momentary footswitch to shuttle back and forth.
With the newer SansAmp PSA-1.1, you can still move the presets sequentially, but you would need to use a MIDI footcontroller. (Check out our player-friendly MIDI Mouse or MIDI Moose.) For more help, please contact us via our website.
@Cyberdemon
All SansAmps are designed for direct recording.
The speaker sim is incorporated into the circuitry and is designed to deliver the appropriate speaker for the designated setting.
The SansAmp PSA gives you fairly detailed emulations of each of the Character Series pedals, but the pedals go into even greater detail of each amp style.
Overall, you have much more flexibility with the PSA and you can save your favorite settings. It's a matter of your preferences and budget.
Absolutely must-have piece of gear! Amazing sound and easy to use!
When you tweak the knobs, the display will blink to let you know you've changed its position. It's very simple, though to find where a particular knob was set for any given preset. Full instructions are provided in the owner's manual.
@nunoinocencio
There are two 1/4-inch inputs, one on the front and one in the rear. This way you can incorporate the SansAmp PSA into a rack or patch-bay setup. The front input overrides the rear input which allows you to bypass other gear that may be in the chain.
I have to say, I wasn't expecting to hear a solo from Nous Sommes Du Soleil by Yes at 1:23!
Adding a distortion device to a live vocal guarantees there will be feedback. You can try to add gates to the signal path, but it probably won't eliminate everything.
@davem04ify, Yes you can. It's designed for direct recording, where playback is through full-range speaker systems, and is equally at home in live performance through a full-range PA.
@Michael White, We aren't aware of any forums where people share their presets. Maybe you should start one on GearPage! In terms of the differences, the PSA-1.1 has 30 more user locations, a headphone output, an on/off switch on the front of the unit, and a Trim ("master volume") control for global level adjustment.
@okantuncer1, It's difficult to figure out if you're doing something wrong without knowing more, but it shouldn't sound "fizzy." We recommend cleaning the jacks first. Spray some DeOxit or similar electronic component contact cleaner (not WD-40) in the jacks and then vigorously jam a 1/4" cable plug in and out a dozen times. If that doesn't solve the fizz, I recommend contacting us directly via phone or email to discuss further options.
@Jacques Lamanque, for the record, most players who travel with a SansAmp PSA, do so in a rack and we rarely get any back for repair.
I really liked this unit - awesome fun and great sound.
@synthelabo
It is direct out. We did connect it to the Power Engine 60 in our other video, which also went direct out from the cabinet. Nothing was miked.
No... there are Low and High EQ controls for Bass and Treble. Buzz, Punch and Crunch affect low, mid and high frequency distortion, tonality and harmonic content. Those are the aspects that make Fender break-up different from Marshall break-up, from MESA/Boogie break-up, from Ampeg break-up, etc. It's also why you're able to emulate so many different types of amps with one product.
I wouldn't be so obsessed with analog stuff anyway. There are some really good digital modelers to try too. They are really good today, because of cheap powerful DSP processors. They can get pretty close in proper hands. You can hear it in hundreds of clips on YT. Tubes and analog gear will be always most desired of course.
@pentagonoenllamas
The SansAmp RPM will offer a bluesy lead tone, like a cranked up '60s Fender or Ampeg amp. It won't get into Marshall overdrive territory, but it will certainly accept overdrive/distortion pedals very well if you want that kind of gain.
@prashantsuhas, We have many things on the drawing board, but no immediate plans for the TRI-A.C. You can probably find a used one, though. Good luck!
@LeonGrinberg
The PSA is an analog preamp with no built in effects (other than EQ.)
The MIDI capability allows you to save presets and combine the unit with a MIDI effects unit for a super versatile guitar rig. I use a Rocktron Xpression in the effects loop of the Tech 21 PSA with excellent results. The preamp doesn't "eat" guitar tone whatsoever.
The Tech 21 PSA will NOT sound or "feel" like a digital POD/Axe FX/AmpFarm-type software plug-in for better or for worse.
@HoursUponEndOfficial. Not sure exactly what you mean by "the real thing." The software, obviously, is digital vs. the hardware, which has an all-analog signal path. You might want to get one and see if you like the hardware better. Some people run their tracks through a SansAmp (pedal or rack) in mixdown to warm it up. If you have one, try that. Good luck!
@pentagonoenllamas
Eventually, but right now we're working on a bunch of videos for our new products. Thanks for asking!
@ersemola. It is solid state, all-analog. Not sure what your other question is.
@JoshuaSethComposer
We have many things on the drawing board, but no plans for a pedal version. Thanks for asking!
@PeaElAre, indeed it can. You can download the owner's manual on the Support page of our website (tech21nyc) for full details. Just be sure to choose PSA-1.1. If you need further technical assistance, you should email us directly.
Interesting bit of kit... the guy freaked me out at 5:14 though! Tech 21 gear is very tempting as an alternative to digital modelling. I heard a Tech 21 Trademark 60 demo'd last night at a guitar workshop... VERY impressive.
100% analog signal path. I like that!
@MonolithDeathcultHQ: I understand you have been in touch directly with our customer service dept and they are handling this. Just wanted other TH-camrs out there to know we're not ignoring you! Any time there's an issue with product performance, it's always best to email us directly, as it usually takes several rounds to narrow down the problem. Thanks!
You should definitely bring back PSA rack with IR integration :)
Can we see some bass demos with the PSA I know a few big players use them. Phil from taproot uses it. I'm currently using the RBI as my main tone with the GT2 for distortion here and there not a whole lot of distortion though mainly intros and stuff. Love my RBI by the way
@chickabuka
You should contact us directly, as it's not a short answer. And, no, the SansAmp PSA does not have effects. You might want to check out our Boost D.L.A. and Boost R.V.B. pedals, though. :-)
@Tech21nyc
Ahhh! Nice!
Cheers!
@UncleTito72
Ray used his own guitar, so we don't know. I would assume he's happy with them or he probably would have used a different guitar.
@mgdth502
Yes, the SansAmp PSA will pair up nicely. I would recommend calling our office if you need further help or advice.
@okantuncer1, we'd also recommend decreasing the High control to see if that makes a difference in the fizziness. Again, it's best to contact us directly so we have all your info and then we can give you the best advice.
I love with the first preset he makes he goes "and we'll turn this distortion up a little bit, don't wanna go to crazy" *turns all the way up*
I find that my PSA (original version, bought it in 2000) sounds better thru a clean guitar or bass amp than it does thru a PA or a keyboard amp...You can hear the fizziness of that sort of setup in this vid. But with an amp, it absolutely rules!
If you mean, SansAmp PSA into side A of an A/B box, and another preamp into side B, with the common output feeding a power amp and speakers, I don't see why not.
In the end, all that matters is you are happy with what you are hearing, be it analog, digital, tubes, whatever. BTW, we are proud to be celebrating the 20th Anniversary of the SansAmp PSA.
@6StringAxeMoFo
It's Ray's own fingerstyle arrangement of "Desperado" by the Eagles.
It is possible, but there are other factors we would need to know --such as type of guitar, what you're plugging into (amp or power amp), etc. I would encourage you to call or email us (see website for contact info) so we can give you the best advice.
@hydroturd, no, you would need an audio interface.
@LeonGrinberg
Sound quality is the same, only the functionality and extent of different sounds is different. Sorry for the late reply, btw...
@Zhorellski
It depends on the power amp's input(s). If it has 1/4" inputs, use the PSA's 1/4" outputs. If it has XLR inputs, use the PSA's XLR outputs. If it has both, choose either (it makes no difference). The speaker simulation is always on... you can't turn it off.
Sounds great, is that a DI out with cab sim? are these for sale anywhere?
A pedal version of this would be amazing. Any plans for such?
We ship our products with the proper voltages to each of our international distributors. If you require additional information for your particular country, I suggest you email customer service through our website.
OK, thanks. I'll try to record a sample and e-mail to you. The "fizz" I'm talking about is more like when you play a distortion pedal through hi-fi speakers.
@aclaar877, sorry you are having a problem. I suggest you contact us directly via phone or email, which you can find on our website, tech21nyc. It can sometimes take several emails to pinpoint what needs to be done.
I've had a PSA-1 for several years now and I love it but for DI the built-in speaker simulation doesn't impress me - doesn't seem to do much more than un-alka-seltzer it leaving it a bit lifeless - I DI mine through an ADA Microcab.
I'm playing the changes to Autumn Leaves with a bass line. I'm a big fingerstyle jazz player....
@BluesMannus, great video. Well done! Thanks for posting. We will post on our FaceBook page. But, y'know, everyone is going to want to know what settings you used for each of those sounds... ;-)
Ok its well known and popular to play some metal/high gain stuff, but how about some sparkling clean sound? Could it beat roland JC
I have the PSA1 love the clean tones. Having trouble finding a good distortion setup that I like.Are there any forums for presets? BTW what's the difference between the PSA1 and the PSA1.1?
i love the twang you can get out of this one.
wish it had a tad bit of low end and just a tad less of overdrive.
i'm sure it's able to happen via that pedal.
ever hear of an EQ homie? Virtually all the pros use'm!
@@kennyh5083 I mean the fact that I said that I am sure that it can happen with that pedal? Naturally this would be using EQ. Lol. Not quite sure what your getting at here.
Only reason I know this tech 21 is good, I have it set up on my computer with my pro tools program, didnt even know it was in there, found it by accident, the sound is beyond great, im just kinda lost on what i need exactly to play one like you are showing, could u offer me some set up advice , what do i use with the pre amp for say a small band, does this model have delay and reverb, thanks in advance. Gary
Why don't you guys make the TRI AC anymore ?
It was such a success i'm considering buying myself another one just for spare parts
The TRI AC sounds so much better than this one especially in the high-gain settings ..
Excellent demo!
It's such a contrast to most TH-cam "demos" where tyros try to titillate other cases of arrested development with their Neanderthal neophyte noodling. Nice to hear an experienced PRO player runs through a variety of MUSICAL samples quickly!
I'm a long-time fan of sansamp products. My original sansamp is over 20 years old and still works beautifully. I got the GT2 in 2007. That's a GREAT thing to carry in your gig bag for emergencies or just use in front of any amp, especially when you have to use a questionable backline or rented gear.
I bought several of the character" series pedals. They're friggin GREAT for sessions! The producer or engineer says he wants a Marshall, or Vox, or Twin, or Hiwatt or Mesa sound. I reach in the bag, pull out the appropriate pedal and BINGO! He gets what he asked for, then I get paid plus call-backs. All the sansamp stuff I have so far is MONEY... They pay for themselves fast.
Because of this demo, I sprung for the psa1.1 about four years ago. Combined it with the digitech GP1000 preamp which i use only for its nice effects and midi control. ALL the raw analog tone comes from this thing, Power from a QSC amp. It's a slick rig!
Consistent awesome tone on any night, any venue. Reliable as Bill O'Rielly lying.
The whole shebang fits neatly in the trunk of a Civic, and rolls in its rack case. The only lifting I do is in and out of the car, unless there's some friggin stairs, then I get union help or find a manly monkey as mule. Union stage hands, scabs, airline baggage handlers and drunk roadies have (so far) failed to destroy it.
I'd buy one of those nifty fly rigs too, IF it was stereo and IF it had the cat-5 cable power like Richie Kotzen's.
HEY TECH 21! Are ya listening?
WE WANT STEREO OUTs and CAT 5 Cable-power convenience!
Peace.
@Tech21nyc Thanks for the answer. I was also wondering if the FX loop in these units (RPM, PSA) is pre or post speaker emulation.
@Tech21nyc Cool. I would just want to know if the RPM has enough overdrive for a lead tone.
As with any other preamp, you can run as many in line as you'd like. Typically, however, the more you do, the noisier it gets.
I'm seriously thinking about selling my Randall MTS tube rig and trying one of these. I'm so sick of lugging around these heavy ass amps, breaking my back and still having an amp I'm not happy with.
You all still make this? I sold mine years ago. Like 20 years
Why would anyone upload a 220p video for an audio demo? HD uploads will preserve the high quality audio.
ive been using the psa1 for a long time - it can produce a variety of distortion sounds to be used in modern metal stuff, dropped tuning etx.
but he didnt produce those in the video, probably also because he uses no metal axw
ya it works but
a good tube (pre)amp is unbeatable
right?
remember, it is still IC circuits and not "real" analog sound! a bit misleading what he says...
Hey, Sounds GREAT ! but does it have a footswitch? Since you've stopped producing the TRI AC (which I own and enjoy) I can't find anything similar ...
Please answer tech21 :)
Any plans of incorporating this preamp into power engine all in one unit?
@Tech21nyc
I'm between this and character series pedals.
¿Which is better for direct recording?
¿How many different speakers can I sim with PSA?
¿SansAmp PSA = All Character Series together?
No I mean can it work as a two channel amplifier. Clean / Overdrive with a foot pedal?
...and what a great Video!
I got this little monster and i'm really happy, i just want to know why when i put a tube screamer in front it makes so much noise, i dont have any other pedal just a tube screamer only for BOOST, (BTW sounds extremely PERFECT with a good tube screamer) i dont know if the ''problem'' is at my PSA or in any other, thanks in any case.
It might be best to contact our customer support department for this question. (info@tech21nyc.com ) There are a number of factors. It usually comes down to gain staging and signal to noise ratio.
@@Tech21nyc After i send my question i connect my booster at the rear input....no noise... nothing....i connect and my wah wah....no noise....propably my front input has a problem because I bought it used.
Thank you for your time in any case!
This unit have guitar input on the back? I notice the guitar is not pluged to the input of the unit on the video... :S
Which output to use when hooking it up to a power amp? bypassing the speaker simu? they all sounds (with speaker simu) the same?
@derdude Why not do both-double track, one direct and one with a microphone?
whick amp configuration are you using in the video? i mean, is the sansamp direct out or did you connected it to a cabinet?
I guess I could run it through a solid quality combo amp on the clean channel???
Is there any chance you guys could make a demo of the RPM?
I really like my PSA-1 - my bandmates noticed a warmer sound when I used it at practice, and for bass it really makes it come to life. But, I have a problem - after a few minutes of play, it starts clicking, which is the sound it makes when you move a dial off a preset. I've read that vibrations can throw it off a preset, and I've also pulled out all the dials which you recommended via email. It's not on top of an amp, either. Other suggestions? Any chance you could swap it out if I return it?
because I have never used a preamp b4 does this plug in from the from the front or just thru the power amp section on the back of an amp or thru a effect loop.How many watts does it push.I have a Peavey Stereo chorus 400 head
Hello, grat preamp. Id like to know if you can plug the sansamp psa 1.1 to a poweramp and then controll it with gcx ground controller?
Hi, I have a PSA 1.1 I'm using for years. While I'm happy with it, It noway sounds similar to this video recording direct, it's always "fizzy". So I resorted using an external cab simulator. Am I doing something wrong?
"tweek this just a little" TURNS EVERY KNOB ALL THE WAY ROUND WTF
JAJAJAJAJJA i know
Can you use a foot pedal for an A-B amp option?
whats the song he plays after we will rock you
Amen!
@Tech21nyc convincing reply lol
ive got the plugin version that came with protools 10 but i cant get sounds like the real thing :/ any suggestions?
is it possible to get one of these in 220-240v power?
@pentagonoenllamas
It is post.