Good job! We do such a welding on thick meterials with solid wire 1.2 mm wit 10/11m for a minute and with the 30/31 volts. It's different welding. You have to go fast. It's much easier to weld with 0.8mm wire, you have more time for reaction. I wish I could work on such a setup in work. It would be less stressful 😅 Anyway, working on higher settings like we do gives you great looking welds almost flat and perfect when you have an experience. Greetings from Poland!!!
Thank you. Yea we weld lots of big construction,like 50-80 mm thick , and we use only 1,2 mm wire 😏, buth we have problem we dont get clean material , so its hard to get nice welds , buth i do my best all time 😎
I think he did but a really tiny weave like he's barely weaving at all. Cus he's welding on higher settings, the weld builds up alot quicker so if he did the same size weave as youtube welders do on low settings then his welds would be one big great 10mm weld in a single run but his target is to make a 12mm multipass
Good job!
We do such a welding on thick meterials with solid wire 1.2 mm wit 10/11m for a minute and with the 30/31 volts. It's different welding. You have to go fast. It's much easier to weld with 0.8mm wire, you have more time for reaction. I wish I could work on such a setup in work. It would be less stressful 😅 Anyway, working on higher settings like we do gives you great looking welds almost flat and perfect when you have an experience.
Greetings from Poland!!!
Thank you.
Yea we weld lots of big construction,like 50-80 mm thick , and we use only 1,2 mm wire 😏, buth we have problem we dont get clean material , so its hard to get nice welds , buth i do my best all time 😎
@@migstickwelder1992 The unclean meterials are always an issue in the business. That's why we use high energy and thick wire 😀!!!
Your welder sounds crazy much different than what I'm used to.
becouse its pulse welding and it sound like a bees haha , do u weld with pulse welder?
A solda que está a fazer não necessita trablaba-la apenas recuar encher e avançar
Very good job👏
thank you
Is cursive e technique or another welding technique where u dont stay in the root the whole way through still strong enough for structural welding?
Does this help with a tee joint welding test
If u weld for test, first pass cant be welded with movement , just push straight becouse root wont be same all the way
Para quem queira aprender amperagem correta e movimentos correto tenho sequências de aulas e tiro dúvidas isso não explica nada
Odlično
What type of welding machine please?
Its EWM phoenix pulse 400
It cost around 8K buth it have all in Mig-Mag , Electro , ac dc pulse Tig
Please help. Wich max thk for single pass (cap) for weld pipe? Any international code or standart?
What thickness mate 😁
3" pipe 5.49 thk. Single or multi pass (cap) reqire? In which standart its mention. Thanks, my best regards to you@@migstickwelder1992
Did you go to any welding school or course? My welds structural horizontal welds look identical n i was windering if its good enough to pass the tests
for test at least first pass need to be just draging for better penetration in root , and next one u can make some movement 😁
@@migstickwelder1992 absolutely right
Not bad 👍🏻👍🏻
thank you
What is the differeence between mig and mag welding?
Mig (metal inert gas) mag (metal active gas)
What size is your soldering iron and what is the current?
1,2 mm i think it was on 240A
@@migstickwelder1992 thanhyou
Nice weld
thanx mate 😁
😮😮
Nice
What wire speed and voltage are you running ?
wire7,6 volts21,8
@@migstickwelder1992jesus u welding that thick of metal on them settings?
@@VypaGaming yea thats about 230Amps
@@VypaGaming its not that thick and its preheated
🎉🎉🎉
you did notin similar to wat you draw
I think he did but a really tiny weave like he's barely weaving at all. Cus he's welding on higher settings, the weld builds up alot quicker so if he did the same size weave as youtube welders do on low settings then his welds would be one big great 10mm weld in a single run but his target is to make a 12mm multipass
@@VypaGaming fist wave only then just move back an forward
🩵
Cap?