The impurities came from allowing the gold to settle in the aqua regia overnight. Decanting while the soluttion is still cloudy with the impurities in suspension and immediately rinsing the gold sponge with hydrochloric and then water will have removed the impurities that followed the gold. The gold percipitates and settles faster than the impurities. Standing overnight allowed more impurities to precipitate into solids and settle with the gold sponge. Sprinkling Borax several times through the melt process will drive off remaining impurities as well keeping the button from sticking to the dish.
С новым годом ,удачи тебе ,скажи почему Лондон,судя по молоткам ты нашь , Скажи ты бы не мог сделал переработку катализатора интересно твое решение ,и второе патрон от противогазов ДП2 ???
Hi, Still liking your work. I wonder if you could include the 'why' together with the 'what' when you make additions? For example, why were you adding sodium nitrite? What reactions did you expect, What result did you expect, why that chemical instead of another option. etc Keep up the good work & stay sa0fe!
This is fascinating. It would be cool if when you say what the next step is you also explain why you're doing it. For example: "seasoning with sodium nitrate and then remelting". Why? Or "seasoning with borax". Why?
for example I season with nitrate to oxidise any impurities that may be present, and I season with borax to remove the oxidised impurities from the button... I thought since I've explained this in other videos there was no need to go into details... Please accept my apologies!
@@OwlTech333 will a 3 to 1 mix of nitric acid and water disolve the tin? I was told it would disolve most base metals, is that true? I have 800+ similar pins, and the chemical to do it I'm just still pulling all the pins 1 by 1 with a pick from the blue connectors. Do you know of any easier way to get the metal out of the plastic? Any advice would be appreciated, great videos BTW..
He said early on that he used 10% nitric solution (looked like about 1,500 ml) with 50g of citric acid added, three times. So, approximately 4,500 ml 10% nitric solution. Then they are boiled in 50% nitric (looks like about 1,000 ml) until all base metals are dissolved. He doesn't state the times, but I would guess 2-3 hrs per 10% nitric boil, and another 3-5 hrs per 50% boil. (Keep boiling til the reaction stops, which means the acid is used up.)
@@xenaguy01 Thank you! You are a very good observer! Your time calculations are also correct (as I remember it - it took me whole day to dissolve the pins)! I'm impressed!
пиздец, мы в институте выбрасывали в контейнер эти разьемы и косы с такими и похожими разьемами целыми коробками, от старого оборудования и проводки датчиков в испытательном ангаре... таких разьемов там было явно больше 85...
Heya ! Thanks for sharing your job ! It's a really cool ratio ! Soon we'll be rewarded doing such job... Do you feel "price" getting crazy sooner or a bit less ? :D Enjoy. God Bless.
questiong for you: I notice you are using a glass filter. Is that one with a fritted filter in it? If so, how do you clean the filter/prevent it from getting too dirty in the first place? I have only heard of pre treating with boiling hcl thru it
@@OwlTech333 I was thinking that myself. The only uncertainty I had, however, was whether to denox? I'm assuming your thoughts were "any gold/pm's in/on the filter will be dissolved by the AR and back into the whole, therefore I denox my solution after a first filter." thank you for your time and response
@@OwlTech333 thank you. 4% of gold is very unnusual, I know about 1,4 % pins. So that have to be some very special connectors, military or nuclear energy or key communication stuff...
Paisano, se me ocurre, que te complicas la vida, ruido i mucha más energía. Porqué no actúas , sobre el tubo de alimentación. Haz una flauta para jugar con el caudal de aire-gas?. Suerte!!!
Hola que tal un gusto al ver visto tus videos, me resulta muy interesante. Tengo una consulta a ver si puedes ayudarme, primeramente soy de ARGENTINA, mi nombre es MATIAS y mi consulta es de donde podria comprar materiales como *PENTIUM PRO* en varios kilos y traerlos para argentina sin tener ningun problema ya que aqui en mi pais por lo que eh averiguado no se permite ingresar esas clases de materiales. Tienes alguna empresa confiable que me puedan vender a buen precio y enviarmelo a mi direccion sin ningún compromiso? desde ya MUCHAS GRACIAS, SALUDOS TOTALES.
@@OwlTech333 thank you so much..my dear professor....I'm from india... Im 7yrs back 8months countinue gold recovery from e-waste and 3000sim cards .I don't take single grm gold..... that time...I had lot of loss time and money...I'm again restart this experiment 🧪🧪🥼
@@johnh8615 It wold be a start. And I see no need to insult the man no one is perfect. At least he is actually doing it and I'm sure with more experience he will do better.
Just beautiful gold...
Wish we all could get that kinda stuff. Amazing 👍👍
That's the whole point of the video....
Anyone who wants to can.
The impurities came from allowing the gold to settle in the aqua regia overnight. Decanting while the soluttion is still cloudy with the impurities in suspension and immediately rinsing the gold sponge with hydrochloric and then water will have removed the impurities that followed the gold. The gold percipitates and settles faster than the impurities. Standing overnight allowed more impurities to precipitate into solids and settle with the gold sponge. Sprinkling Borax several times through the melt process will drive off remaining impurities as well keeping the button from sticking to the dish.
The second refining rilly paid off good job 👍
Indeed! Thank you!
Мастер клас.Огромная проделана робота- но она етого стоит.
When I was the molten gold rolling around in the crucible I said WOW. I have never seen that much gold melted at one time. Great job👍
Thank you!
I have More connectors
I too said WOW
Sir@@mustahinabrar6015
I'm glad you got a good recovery from your material but I hope the next batch is even better. Take care.
Thanks 👍
Yep. Military spec has usually twice as much gold as plain commercial gold plated pins.
😎 awesome owl tech
Ok now all u gotta do is send it my way lmao. Great vid
С новым годом ,удачи тебе ,скажи почему Лондон,судя по молоткам ты нашь ,
Скажи ты бы не мог сделал переработку катализатора интересно твое решение ,и второе патрон от противогазов ДП2 ???
С Новым Годом! Разве в Лондоне не могут быть наши молотки? ;) Да попробую катализаторы, но у меня нет противогазов ДП2
Ржу не могу, в двух видео с разными разъемами, один и тот же кусок золота получился, с такой же трещиной как и с рппм.
в каком еще видео вы видели этот золотой кусок?
Excellent video
Hi, Still liking your work. I wonder if you could include the 'why' together with the 'what' when you make additions? For example, why were you adding sodium nitrite? What reactions did you expect, What result did you expect, why that chemical instead of another option. etc Keep up the good work & stay sa0fe!
Sodium nitrite aids in oxidizing impurities, and borax aids in removing oxides from the gold.
Someday soon I'll be trying this procedure because I've depopulated a whole bunch of motherboards for gold pins LCD chips and precious metals
I've processed my very first converter with the 3to1 mixture and it's like a dark burple looking color and stanis test shows platinum in solution...
Good job
Thanks!
Acierto y error y una ejecución perfecta .Enhorabuena por tu excelente trabajo
Hallo Sar i like your job
Thank you!
Wow! Impressive!
Thank you!
Если вы используете цианид, PGM не растворится вместе с ним. Процесс можно завершить быстро. Простите, если ошибаюсь
Cheers mate
Very good!
Thanks!
Good work. Wish me luck on mine.
Thanks and good luck! :)
Wow. Amazing.
Thank you!
Thanks for the video , where did you get the pieces please ?
which materials we can get the pieces?
Hi. Tank you🙂🙂🙂🙂
Thank you too
Oh man to much gold in there👍🏽
It's never enough
I like your videos ive been really interested in chemistry lately. How much does it cost you in materials to process your metal on average?
not much, about 0.5%-1% of the value of the metal recovered
This is fascinating. It would be cool if when you say what the next step is you also explain why you're doing it. For example: "seasoning with sodium nitrate and then remelting". Why? Or "seasoning with borax". Why?
for example I season with nitrate to oxidise any impurities that may be present, and I season with borax to remove the oxidised impurities from the button... I thought since I've explained this in other videos there was no need to go into details... Please accept my apologies!
Very nice good onya thanks
Thanks for watching!
Very good
Thanks
I'm curious as to why you used citric acid ......thank you im still new at this
tin removal
@@OwlTech333 will a 3 to 1 mix of nitric acid and water disolve the tin? I was told it would disolve most base metals, is that true? I have 800+ similar pins, and the chemical to do it I'm just still pulling all the pins 1 by 1 with a pick from the blue connectors. Do you know of any easier way to get the metal out of the plastic? Any advice would be appreciated, great videos BTW..
Make it 52 kg ,with patience and persistence 🙂
Nice! 😁
How manny kilogram of plated pins
1.27kg
friend .. can you make a video of activated carbon desorption?
Polish connectors have a lot of gold. Connectors LDB elwro!!!!
Dimana saya dapat membeli pin connector seperti ini untuk pemulihan emas
Мпг там откуда ,может ламели которые входили в разъем были покрыты с со временем часть перешла на золото а?
Я не знаю откуда это взялось
So how much nitric acid and how much citric acid? Are they being added as the same time?
Table spoon citric on 200ml HNO3 added at the same time
Nice
First you adding 10%nitric acid and 50 g citric acid. Is this nitric acid are 10% concentrate?
*made in USSR* this is a label of quality in the world now!
Всегда было так
2 questions please - when you were boiling the pins in Nitric - how long did that take and how much Nitric acid did you use?? Thank You very much!
He said early on that he used 10% nitric solution (looked like about 1,500 ml) with 50g of citric acid added, three times. So, approximately 4,500 ml 10% nitric solution. Then they are boiled in 50% nitric (looks like about 1,000 ml) until all base metals are dissolved. He doesn't state the times, but I would guess 2-3 hrs per 10% nitric boil, and another 3-5 hrs per 50% boil. (Keep boiling til the reaction stops, which means the acid is used up.)
@@xenaguy01 Thank you! You are a very good observer! Your time calculations are also correct (as I remember it - it took me whole day to dissolve the pins)! I'm impressed!
Were these pins magnetic is the process the same for all pins ?
Non magnetic
أحسنت فيديو رائع جدا
How do you find the scrap?
Initially I was looking for it, but the experience turned the tide, now the scrap is finding me :)
That solution at 14:40 looks like it might be full of PGMs... was it?
svenp Not at all
Thumbs Up
Hola amigo Owltech interesante tu video megustaria saber la presipitacion del oro cual es el nombre del producto que usas en el video
Es metabisulfito de sodio
y nitrito de sodio para la segunda precipitación
What is the reason for using sulfamic acid?
converts the excess nitric acid
@@OwlTech333 what Can urea be given instead of sulfamic acid?
Pls said,,,,,
@@bashchasi2071 yes you can use urea instead
If you don't provoke fire after giving SMB, will you get full gold?pls said
Thanks Nice
Thank you too!
❤❤❤❤❤
пиздец, мы в институте выбрасывали в контейнер эти разьемы и косы с такими и похожими разьемами целыми коробками, от старого оборудования и проводки датчиков в испытательном ангаре... таких разьемов там было явно больше 85...
Would it not be possible to melt pins after citric/nitric acid step? Using lead??
Yes but it won't be 9999 pure
OwlTech thanks mate.
Hard to believe!!!😮
Yet is real
А чем вытащили МПГ из отработанного раствора, после нитрита?
Аскорбинком
0,2 грамма разница между слитками до и после, и не факт что это МПГ
Адепт Так точно
❤❤❤فيديور رائع ما مرسب الذهب ميتاء
Привет , очень много работы и времени , материал в виде штырей отлично подходит для способа как расплав , почему не применили такой способ ?
👍👍👍
Disculpa como se recupera el zinc diluido en acido cloridrico o muriatico
فيديو رائع
Привет. Расскажите про свою горелку. Как плавите
Кислородно-пропановая горелка
@@OwlTech333 а кто производитель?
Hey. Where do u get these connectors from?
Military spec/grade
What is the purity? 24K??
Yes
СССР Рулит
Heya !
Thanks for sharing your job !
It's a really cool ratio !
Soon we'll be rewarded doing such job...
Do you feel "price" getting crazy sooner or a bit less ? :D
Enjoy.
God Bless.
wow. I'm not sure I've heard of pins yielding even 1/4th that.
questiong for you: I notice you are using a glass filter. Is that one with a fritted filter in it? If so, how do you clean the filter/prevent it from getting too dirty in the first place? I have only heard of pre treating with boiling hcl thru it
yup, that's how i clean mine too, although I use aqua regia for cleaning.
@@OwlTech333 I was thinking that myself. The only uncertainty I had, however, was whether to denox? I'm assuming your thoughts were "any gold/pm's in/on the filter will be dissolved by the AR and back into the whole, therefore I denox my solution after a first filter."
thank you for your time and response
Which connectors pins?
Hi sir
What about ascorbic acid gold deposition
Thank you
High yield pins! The process takes longer, but the yield is worth the effort.
Whar are SNP conectors?
www.google.com/search?source=univ&tbm=isch&q=%D1%81%D0%BD%D0%BF+%D1%80%D0%B0%D0%B7%D1%8A%D0%B5%D0%BC&sa=X&ved=2ahUKEwjn1KCOgv3pAhUJYsAKHXHGD9sQsAR6BAgKEAE&biw=1920&bih=964
@@OwlTech333 thank you. 4% of gold is very unnusual, I know about 1,4 % pins. So that have to be some very special connectors, military or nuclear energy or key communication stuff...
The pins were almost 50 pure gold?!?!?!?
52.3g pure gold
@@OwlTech333 wow that's amazing!
From where can i buy the pins?
what? 40.94 kilo of gold in just 1 ton of these pins. must be the highest amount of gold in any ewaste! jesus christ
Actually there are 40.94kg gold in a metric ton of these pins
@@OwlTech333 wow! i thought it was 52g out of 2.5kilo
1.27kg
could anybody tell me the exact model of these connectors? are these the snp 111?
Citric acid+Nitric is better combinațion instead Hcl to disolve tin and lead?
yes
@@OwlTech333 oki, thanks i will try it too.
Paisano, se me ocurre, que te complicas la vida, ruido i mucha más energía. Porqué no actúas , sobre el tubo de alimentación. Haz una flauta para jugar con el caudal de aire-gas?. Suerte!!!
Warigud
ممكن رمز مرسب الذهب
Goood
Можно заменить smb на калийmb?
Да
@@OwlTech333 смб это что?метабисульфит натрия?
@@МаксимСлезкин-п7б да
👍👍👍❤️❤️❤️😎😎😎
Try using hf, sir.Besides citric acid, can you or not?
I've never used HF so I don't know
Hydroflouric acid They say tantalum and silica solvents ... which are insoluble with HCl and nitric acid
@@OwlTech333 Sorry sir, sir, I use Google translation because I don't understand English very well because I'm Indonesian.
Sorry, sir, can I Video be up loud again to get Indonesian subtitles?
👍🤗👍
Hola que tal un gusto al ver visto tus videos, me resulta muy interesante. Tengo una consulta a ver si puedes ayudarme, primeramente soy de ARGENTINA, mi nombre es MATIAS y mi consulta es de donde podria comprar materiales como *PENTIUM PRO* en varios kilos y traerlos para argentina sin tener ningun problema ya que aqui en mi pais por lo que eh averiguado no se permite ingresar esas clases de materiales. Tienes alguna empresa confiable que me puedan vender a buen precio y enviarmelo a mi direccion sin ningún compromiso?
desde ya MUCHAS GRACIAS, SALUDOS TOTALES.
Sir can i use hno3 and h2so4 for removing lead and tin?
I don't use H2SO4, but HNO3 will dissolve lead and dilute and cold HNO3 will dissolve tin
Thank you sir
Hi own tech...PGMS mean
Platinum group metals
@@OwlTech333 thank you so much..my dear professor....I'm from india... Im 7yrs back 8months countinue gold recovery from e-waste and 3000sim cards .I don't take single grm gold..... that time...I had lot of loss time and money...I'm again restart this experiment 🧪🧪🥼
why u add sodium nitrate
when?
ಹಣಕಾಸು ಕಳ್ಳರು ಸಹ ಅವರೆ...ವ್ಯವಹಾರಿಸೂದು....ದುಡ್ಡೆ ದೂಡ್ದಪ್ಪ😂😂🙂
Give title Serbien!!!? Please...
Ok
Hello Friend! what do you use to neutralize the aqua regia?
Sulphamic acid
@@OwlTech333 can gold evaporate in aqua reqia?
From where can i buy Them
I don't know
At 10 minutes you started moving the camera so much I couldn't enjoy it anymore. Please use a tripod.
note taken
@@johnh8615 It wold be a start. And I see no need to insult the man no one is perfect. At least he is actually doing it and I'm sure with more experience he will do better.
Pakek bahan apa bos
HNO3, asam sitrat kemudian aqua regia, asam sulfamat dan natrium metabisulfit turun kemudian emas. Sodium nitrit untuk pemurnian kedua
You dont no estabiliced solution brea need utiliced big metabisulfino.
What are you doing with the used acids, flush them down the drain?
Recover copper
Uree avant smb et smb doit être diluée dans l'eau tiède.
je n'utilise pas d'urée
Try watching Chanel thoisoi sir.
I will!
Very difficult method. You can
wash away the gold.
Do you have instagram
Iva Ivanovic yes
@@OwlTech333 you can give it to me instagram
Owltech333
au=??
Что smb.
Na2S2O5