question about this machine, can you use keys that were lost (i worked in a dealership and we had a drawer full of keys that were lost from old vehichles) and reprogram those keys for vehicles? or are the fobs kind of locked to the vehicle they originally came with? and if they are locked, is there any way to 'reset' an existing key to program it to a new vehicle?
Good stuff. I added 2 key with the same autel and but have a previous working key theat i generated the pass word for. Both start the car but only when i insert it into the ignition. But the keyless go don't work on the 2 new keys only works on the original key i copied . How do can i get the 2 new keyfob to work?
Great video. I got 2 questions 1. You didn't need to choose anything related to smart key type when writing When i add a key and the ori key is smart it asks if it's smart and i have to say yes, and i do the process without battery on the vvdi smart key ? 2. Can these keys be renewed with Autel, as they are be keys but smart ?
Hey joe. Great stuff as always brother. I got a newbie question. Do you always try on a ALK situation to do it ON VEHICLE? How you can spot when it will be needed to go ON BENCH? (The question is mostly for mercedes). Thanks bud great work also.
What a teacher
Very familiar voice and expert presentation. Might this be Joe DF...? 🙂 GREAT vids on this channel!
hello during the procedure should we put the warnings?
question about this machine, can you use keys that were lost (i worked in a dealership and we had a drawer full of keys that were lost from old vehichles) and reprogram those keys for vehicles? or are the fobs kind of locked to the vehicle they originally came with? and if they are locked, is there any way to 'reset' an existing key to program it to a new vehicle?
No most keys are not re-usable. Some keys are supported for renew
@@JoeDLocksmithwhich keys are reusable
Good stuff. I added 2 key with the same autel and but have a previous working key theat i generated the pass word for. Both start the car but only when i insert it into the ignition. But the keyless go don't work on the 2 new keys only works on the original key i copied . How do can i get the 2 new keyfob to work?
Good job ❤
Is there any special procedure to program a renewed oem keyless go key on the w221 with all keys lost ?Do i have to remove batteries? Thanks
2008 s550 all keys lost proximity same procedure?
Great video 👍 my question is is this VVDI key first needed to program with xhorse tool ? Thx
any reason why you didn't use g box? did you know that it would be a quick password regardless?
Great video, but I didn't understand what kind of resistance number should use for 315&433frequenc?
The key comes ready at 433mhz. If you want 315mhz, remove the resistor labeled FRE
@@JoeDLocksmith ok thank you very much I'm very happy with your great information
How do you remove it? Just rip it off with some needle nose or do you need to desolder?@@JoeDLocksmith
@@JoeDLocksmith is the 315 and 433 for different model vehicles or for the keyless go?
good video thanks , did you use VVDI MB tool to program key for this car ?
Your is Autel IM508?,because mine IM508S the icons are different.
Great video.
I got 2 questions
1. You didn't need to choose anything related to smart key type when writing
When i add a key and the ori key is smart it asks if it's smart and i have to say yes, and i do the process without battery on the vvdi smart key ?
2. Can these keys be renewed with Autel, as they are be keys but smart ?
Yes the keys can be renewed. VVDI instructions say to use normal key type v51 for key writing
@@JoeDLocksmith thanks a lot for the info
Merci beaucoup mon formateur
@@JoeDLocksmith hey bro. did you directly connect to the OBD? and where was it located at ?
@@outofthisworld8037 directly to OBD, driver side kick panel
Hey joe. Great stuff as always brother. I got a newbie question. Do you always try on a ALK situation to do it ON VEHICLE? How you can spot when it will be needed to go ON BENCH? (The question is mostly for mercedes). Thanks bud great work also.
Newer benz are easier by obd so yes u should always attempt obd first on 04+
If it fails you bench it
where do you connect the plugs?
I would have loved to see your setup for this process. You started after everything was connected
th-cam.com/video/01LG7qpyj3U/w-d-xo.htmlsi=fhdw9FwayJzYsBFY
Good job my friend how to program smart key with car any way to program smart
Can im508 do it on vehicle at the same 608?
yes
Joe, you didn't need a gbox for this procedure??? 😊
Hey guys,
2006 cls55 , original key has keyless go working. Can I get keyless go to work on a aftermarket backup key.??
Amazing
HOW MUSH IS THE PRICE FOR A
utel IM608
Is there a way to get the key blade code?
SALUDOS, PORFAVOR PUEDE DECIRME COMO ES LA CONETCION PARA PROGRAMAR CON 608. THANKS
SALUDOS PUEDE DECIRME COMO CONECTAR LOS CABLES DE 608 PARA PROGRAMAR.
where are you buying your keys?
Uhs-hardware.com
Hi is it possible to renew a smart key??
Thanks but help for benz 2018
Dealer only
In your dreams
@@segounlocks5029is it possible or not
@CeeeRock1 if your asking this question you probably shouldn't attempt any akl on benz sorry
@@segounlocks5029so dumb
STEAK GANG
You should do classes and charge for beginners like me im willing to pay
Good idea
Good Job
Anyone know what im doing wrong that my keyless entry will not work with any of the new keys i made.
remove resistor or short board on freq spot
Where is the position of the resistor ?
Why no all keys lost fast? You went to just all keys lost.
You didnt need gbox for this