Early GMT400 Dash Removal
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Well over the length recommended to retain viewers, this video is a step-by-step on removing the dash from your early GMT400. I have yet to find a video that shows every bit. In this video you see every bolt removed. Is it tedious? Absolutely, but if you need a reference that doesn't skip any steps, here it is.
- ยานยนต์และพาหนะ
![⚔️จำกัดเวลา⚔️ [พากย์ไทย] ซอร์ดอาร์ตออนไลน์ ซีซั่น 1 - ฉบับมัดรวมทุกตอน](http://i.ytimg.com/vi/ohkfBVDXLSA/mqdefault.jpg)
Excellent job. Thank you for this. I have my old dash to take out and new one to install. Like you said, the other videos do not show the step by step that’s needed
Thanks! I made this video so I could remember how to put mine back together. It's been almost a year and I still have body work to accomplish, so I haven't even started reassembly yet. Thanks for watching!
Yea your right I do like how you walk people through the whole process
Thanks! I actually took a little more loose than I needed to, but it was hard to tell with all the grass and mouse poo in the way. I took the video for a reference for myself, but figured it was useful to more people.
Thank you for the removal of the dash board very helpful have 91 c 1500 and needs dash board thank you
I knew I'd need the video for reinstalling the dash on Roscoe, and I'm glad you and others are helped by it. Thanks for watching!
These things were able to tilt 45 degrees to be able to service components behind the dash
Yup. I learned that after the fact. It didn't matter so much to me because I needed to pull everything. There were mouse turds in everything. Thanks for watching!
I have done this job without taking the upper duct work out
Yup, there are a handful of steps I could have simplified, but it was only my second time. Also, I had to clean mouse nests out of everything. I was mostly shooting video so I could get it back together correctly. Thanks for watching!
👍
As you take things apart do you line them up in order that you take them apart, so you know what goes back in first?
I do, but I knew this was going to be apart for a while, and since it's been more than a year, it's all in a pile. If my kids' cars would quit breaking I might have a chance to put it back together. Thanks for watching!
Were those dead mice behind the cassette player dash bezel?!! LOL😀
Fortunately, no. It was just leaves and insulation. Thanks for watching!
Good video👍
Thanks for watching, and I hope it helped you!
@@erikstrawn3885 It definitely did that's why I like the video👌
Good video and you are absolutely right these dashboards for the 89-94 Chevy and GMC trucks are the cheapest crap there is, I'm getting ready to take mine out and replace it with a race car type sheetmetal dash.
@@ezekielmoorejr3145 Thanks for watching! Be sure and film your dash fab and upload it!
I thought I had to take apart the steering wheel and disconnect the wiring.
I'm glad I saved you that time. Thanks for watching!
Do you sell the radio in the middle?@@erikstrawn3885
Do I just go to a junkyard with an hour to kill so I can finally fix my crumbling dash.
Two hours. If you're quick that means you have an extra hour to wander around and find hidden treasures. Thanks for watching!
@@erikstrawn3885 lmc tuck has new ...... its tedious but beautiful once finished
@@kennethdagley5659 Thanks, but this dash is still intact. I have it painted and it's going back in. Thanks for watching!
@@kennethdagley5659
Pulling a junkyard dash also give some good training to take yours out (even if you decide to buy new) also videos how to repair your old one.
Depends if you have time/no money, no time/plenty of money, time and plenty of money.
Common sense or no common sense?
Thanks for showing me what I am getting into. I need to change the a/c evaporator and heater core(while I’m in there)
You call that fast man I don't want to see you taking your time lol just giving you hard time
Yup, I'm wrenching for fun, not for profit any more, so I'm taking my time. Thanks for watching!