I've got a Silver GTI myself. Absolute weapon. Amazing spec - Heated Leathers, A/C, Sunroof and the 6 speed box. Congrats on 100K! I look forward to this build!
LOL @ the 'exploded' clockspring 😂 Great choice on that OMP wheel. Looks like alcantara. The smaller diameter makes it feel so much better and quicker. The wheel and a weighted short shifter makes the car more fun to drive. A clutch stop can make your shifts even faster and they cost almost nothing. I use an elevator bolt with a jamb nut the tighten it down as soon as I get it adjusted perfectly. Those Speedlines are a CLASSIC rim, definitely a nice tasteful choice, and lightweight too, which is important in my book. Less unsprung weight is a good thing. Good solution to the sliders too. I used to have a couple sets of Recaro's, I believe 3 sets of Corbeau's and a set of Sparco's. I had fixed mounts in my e36 track car that I built, but when I had the set in an mk3 VR GTI I had a set of Corbeau sliders. I can't remember where I had got them but they were impeccable quality. The fit was perfect, and they were painted with a textured 'wrinkle' style black paint. I also religiously ran nothing but Schroth harnesses, (4 or 5- point,) regardless of just having a harness bar or a cage. If you use the OEM seat belt mounting points, you will be totally safe, as they are load tested to take A LOT of force. As long as the angle is correct, and you wear the harness correctly you will be safe as ever. Best part about a proper harness/ seat with bolsters is how well they hold you in place so you can focus on driving, and not hanging on for dear life. My track car had a 6-point cage I built with diff pickup points, gusseted corners with dimple dies wherever I could put them that would make it more rigid. I had X- bars on the door jambs as well. Personally I am not a fan of NASCAR style door bars. Just figured I'd share my experience with those seat mounts/ sliders, harnesses, seating options, etc. Thank you again for sharing this build. It's off to a great start! 👍👍😁✌️
Awesome little build and love the OEM style race look with the rear carpet install for the Sunday lunch. A mad little car. Look forward to seeing those rims and work on the engine.
Looks good Dan,to make use of that rear seat mount that you painted black you could do another rose jointed bar from that with a clamp the other end to go to the harness bar 🤔👌🏻
Congratulations on the channel progression dude. Was into modding cars when I was younger so started to follow your channel to remind me of the good old days 😂
Great and Well Deserved 100k subs Dan,been from start quality set up every episode,keep it going as your well supported with great set ups that are only getting better.👌
Congrats on the 100K subs milestone Dan very well deserved lets hope you soon reach the 200K mark👌 great video and the little Lupo is progressing well👏🙏👍
Congratz!!! Love the channel. Love to see more. Greets from the netherlands. Maybe put the old mk1 wheels (gold bbs look) under the lupo. I did have the same setup haha.
Love it, Dan.❤ As an OG viewer, so chuffed for you reaching the 100k subscribers.👏 It was always gonna happen, with the content and the way you present it…essential Sunday viewing! Looking at what you’re doing, love the rear seat delete and the usual attention to detail. I think the way this is going, it’s gonna be a streetable track beast and I also think you’ll want it looking it’s best…it’s what you do. So just thought I’d drop another little suggestion, which you may already know. Lupo ‘Cambridge’ rear lights. Had them on both my GTi’s and they are look wicked (they are a smoked version of the standard lights). OEM+😎😎
Thank you so much for watching and supporting Alex! I really appreciate it. It looks ok in there now doesn’t it! The outside is winding me up. I can see me spraying it pretty soon 😂 thanks for the heads up, I will see if I can find a set 👊
Congrats on the 100K subs, like how you do most of the work yourself including the respray on the MK1 GTI, The Speedline wheels will look a lot better, got Speedlines (slightly different model but same color) on my Renault 19 16v hobby car too.
When you change the alternator on the Lupo….undo the engine mount on the drivers side and support and lower the engine, or you will NEVER get the lower bolt out of it 😂 ask me how i know 😂 a 5 minute job took me an hour!
Congrats on the 100k Dan well deserved. Watched all the videos and like the content. Started watching you with the T5 as I was looking for inspiration with my T5. Is the Lupo steering wheel and airbag for sale if so what sort of condition are they in? As I’d like to change the one on my T5. Looking forward to many more videos both here and at home with Abi. Loads of luck for the future. Here’s to the next 100k🍺🍺🍺
Thank you so much for watching and supporting the channel! It wasn't in the best condition and we ended up plying and se the airbag off 😂 sorry. We really need to film an episode on the house as so much has changed!
Good vid pal only just stumbled across your channel because of your caddy content but it’s a really good watch what steering wheel is it you have fitted to the lupo been looking at swapping mine Keep the content coming 👍
I love them vw lupo’s was trying to get one for my first car but there was nothing for miles and miles from my area 🤦♂️😂 has to get a Ford Fiesta instead 💩😂
At a guess I think about 30kg. I am going to get it back on the weighbridge and see this week. It weighed 980kg and hasn’t used much fuel so should be quite accurate.
Yo man idk if youll see this but seems like u know what your doing my dash isnt working properly it sometimes works sometimes doesnt and glitches out and ive checked fuses they are okay any clue or ideas to fix??
Have a Lupo GTI myself and it's very similar (even have Speedline track wheels for it😆) , would definitely recommend a spacer or quick release on the wheel to bring it a little closer for a nicer driving position, clubsport mod looks neat, definitely on my list now to do, good luck with the project and you should definitely check out Clayton Jones' GTI, nicest one in the world IMO th-cam.com/video/fW-3MGG6jdc/w-d-xo.html
I did think a spacer on the wheel may make it a little better, will get in and have a measure up! The clubsport tidies the rear end up and save a bit of weight. Rear seats would not be useable with the buckets so worth doing. Clayton’s is the reason I bought one 😂
Don’t forget to give yourself a pat on the back for your 100k goal. You are the one we are watching as well as the motors.
Thank you! Still blows my mind that people actually like watching me 😂
Well done Dan 🎉👏🏻💚
Cheers dude
Lots of spannery goodness got you to where you are. Well done dude. Not bad for playing with cars as your better half says
Thank you bud! Not done too bad so far have we!
You are my favourite sundaymorning TH-cam passtime! Love the channel and the content. Keep it up, now it's on to 500k!! Greetz from the Netherlands.
Thank you so much for watching! Blows me away that you guys actually enjoy watching me! Can you imagine reaching 500k!
Been watching from the start Congratulations on your 100k milestone.👍🍾
Thank you So much for watching and for the support Chris ❤️
Huge congratulations Dan on getting over 100k subscribers 😎👍🏆✅✅✅✅✅
I've got a Silver GTI myself. Absolute weapon. Amazing spec - Heated Leathers, A/C, Sunroof and the 6 speed box. Congrats on 100K! I look forward to this build!
Thank you so much bud! I can't wait to actually get to drive it!
Well deserved on the 100k milestone. Love the content Dan
Thank you so much 🙏
Congratulations 👏
think I seen every video
Been a pleasure to see you
Progress
Thank you so much for watching and supporting bud ❤️
Buzzing for the 100k mate! Well deserved 😎
Thank you so much 🙏
Happy to hear your getting the attention on youtube that you deserve, and excited to see the Lupo's progression ❤
Thank you so much bud! hopefully it continues!
Lupo means Wolf. It's the Greatest car Ever period, collector's car.❤❤❤❤
LOL @ the 'exploded' clockspring 😂 Great choice on that OMP wheel. Looks like alcantara. The smaller diameter makes it feel so much better and quicker. The wheel and a weighted short shifter makes the car more fun to drive. A clutch stop can make your shifts even faster and they cost almost nothing. I use an elevator bolt with a jamb nut the tighten it down as soon as I get it adjusted perfectly. Those Speedlines are a CLASSIC rim, definitely a nice tasteful choice, and lightweight too, which is important in my book. Less unsprung weight is a good thing. Good solution to the sliders too. I used to have a couple sets of Recaro's, I believe 3 sets of Corbeau's and a set of Sparco's. I had fixed mounts in my e36 track car that I built, but when I had the set in an mk3 VR GTI I had a set of Corbeau sliders. I can't remember where I had got them but they were impeccable quality. The fit was perfect, and they were painted with a textured 'wrinkle' style black paint. I also religiously ran nothing but Schroth harnesses, (4 or 5- point,) regardless of just having a harness bar or a cage. If you use the OEM seat belt mounting points, you will be totally safe, as they are load tested to take A LOT of force. As long as the angle is correct, and you wear the harness correctly you will be safe as ever. Best part about a proper harness/ seat with bolsters is how well they hold you in place so you can focus on driving, and not hanging on for dear life. My track car had a 6-point cage I built with diff pickup points, gusseted corners with dimple dies wherever I could put them that would make it more rigid. I had X- bars on the door jambs as well. Personally I am not a fan of NASCAR style door bars. Just figured I'd share my experience with those seat mounts/ sliders, harnesses, seating options, etc.
Thank you again for sharing this build. It's off to a great start! 👍👍😁✌️
Thank you for watching bud, Sounds like a cool motor! Hopefully we will do some more to the Lupo next year.
Awesome little build and love the OEM style race look with the rear carpet install for the Sunday lunch. A mad little car. Look forward to seeing those rims and work on the engine.
Thank you so much bud, I am really pleased with the interior!
@@DanChambersDAC send me a PM with your postage details have something small for you mate
Congratulations on 100k! Very well deserved 👏👏
Thank you Max 👊
Congratulations on the 100k Dan, watched every video and loved each and every 1, well done 👍
Thank you so much for watching me ramble on every week!
Congratulations on the 100k subs, your hard work is paying off!
Thank you! Just need the views to pick up so we can start earning a decent amount to keep building!
Looks good Dan,to make use of that rear seat mount that you painted black you could do another rose jointed bar from that with a clamp the other end to go to the harness bar 🤔👌🏻
Cheers bud, not a bad shout that…
Top job. And well done on 100k
Thank you!
Can’t believe you didn’t put the wheels on in this video! Been here from the start and it’s great to see the channel doing so well. Keep it up 👍
Sorry bud, I need to spread the content out and keep you guys wanting more! Thank you so much for watching and for supporting the channel.
Well done pal.....100k you da man
Thank you so much bud 👊
Been here since the first t5 video. Well done on the 100k subs. Great channel 👍
Thank you so much for the support Andy 🙏
Congratulations on the channel progression dude. Was into modding cars when I was younger so started to follow your channel to remind me of the good old days 😂
Thank you bud 🙏 can’t beat modifying motors 👌
Congratulations on passing 100K goal
Thank you Clive 🙏
Keep up the good work 100k subs yes!
Thank you!
Congratulations on the 100k subscribers Dan. Well done mate!😀
Thank you!
Nice one on the 100k watched channel since begining t5 great build enjoying this one too keep it up
Thank you so much for watching and for the support Alan
Congratulations Dan well done fella good luck with the future on here 🎉
I had one of those seat mounts on my track day Mk2, worked perfectly fine with my cheap ass bucket seat.
Sweet bud, Seems like it will do what it needs to.
excellent stuff man! excited for more updates :)
Thank you bud.
Well done on the 100k, you're doing a great job.
Thank you!
I've been sharing your channel on my Facebook group just to help you grow and give the people more VW content 💪💪💪Keep up your good work.
Thank you so much for helping to grow the channel 🙏 I really really appreciate it.
Well do Dan great content
Thank you!
Great video as always man really enjoyed you doing the rear seat delete cracking job
Thank you bud 🙏
Congrats on 100K!
Thank you!
Gz Dan. Well deserved. Making that Lupo look too easy.
Thank you bud! Can’t wait to get out in it!
Great and Well Deserved 100k subs Dan,been from start quality set up every episode,keep it going as your well supported with great set ups that are only getting better.👌
Thank you for watching and for the support bud!
Good job Dan love it!
Thank you!
Congratulations on the 100k, your content is superb. Informative, entertaining and very well edited
Thank you very much for the support ❤️
Looks good Dan well done on getting to 100k
Thank you so much bud ❤️
You've made a great channel mate!!. Australia.
Thank you so much 🙏
Well done on the 100k, Dan! Looking forward to more content, makes my Sunday morning.
Thank you Dave! Glad you enjoy the content!
Love the original wheels 😀
Want to buy them?
@@DanChambersDAC ha Dan, don’t like them that much, and won’t look too great on a mk7.5 😀
Congratulations on reaching your goal. Still loving the content, keep doing what you do
Thank you!
Incredible achievement 👏 well done dan
Thank you!
I was really anxious to see the wheels on..
Congrats on the 100K subs milestone Dan very well deserved lets hope you soon reach the 200K mark👌 great video and the little Lupo is progressing well👏🙏👍
Thank you so much bud, 200k would be amazing!
Congratz!!! Love the channel. Love to see more. Greets from the netherlands. Maybe put the old mk1 wheels (gold bbs look) under the lupo. I did have the same setup haha.
Thank you for watching and for the support! Unfortunately I sold them 🙈
@@DanChambersDAC thank you for the content!
Awesome work Dan - all looks very neat. And massive congrats on the 100k - a lot of work has gone into that, well deserved ;-)
Thank you very much! Yeah I think I forget how much work I have out into this channel!
love the channel and the content keep it up! =]
Thank you so much Rob.
Hey man! For future reference MK4 seat bases are straight fit into lupos :)
Cheers bud, I thought they did but again couldn't find any Mk3 subframes for sale.
Love it, Dan.❤ As an OG viewer, so chuffed for you reaching the 100k subscribers.👏 It was always gonna happen, with the content and the way you present it…essential Sunday viewing! Looking at what you’re doing, love the rear seat delete and the usual attention to detail. I think the way this is going, it’s gonna be a streetable track beast and I also think you’ll want it looking it’s best…it’s what you do. So just thought I’d drop another little suggestion, which you may already know. Lupo ‘Cambridge’ rear lights. Had them on both my GTi’s and they are look wicked (they are a smoked version of the standard lights). OEM+😎😎
Thank you so much for watching and supporting Alex! I really appreciate it. It looks ok in there now doesn’t it! The outside is winding me up. I can see me spraying it pretty soon 😂 thanks for the heads up, I will see if I can find a set 👊
@@DanChambersDAC keep up the amazing work, Dan. Hope the house is going well too, mate.👊❤️
Congrats on the 100K subs, like how you do most of the work yourself including the respray on the MK1 GTI, The Speedline wheels will look a lot better, got Speedlines (slightly different model but same color) on my Renault 19 16v hobby car too.
Thank you! I wanted to show that anyone can get involved and give all aspects a go! They look so much better on the car!
When you change the alternator on the Lupo….undo the engine mount on the drivers side and support and lower the engine, or you will NEVER get the lower bolt out of it 😂 ask me how i know 😂 a 5 minute job took me an hour!
😂 yeah that one came up last week. May have just removed the engine 👀😂
Should make the floor slightly raised so the bulky bit will be under hidden away
I did consider this but I used 9mm ply instead so wanted it to be supported by the floor of the car. I don't think it looks too bad as is.
@@DanChambersDAC no worries looks smart either way bud, love watching your builds and progress.
Can't you can fab something out of the rear seat bracket to hold a spare alloy? I know it's extra weight but may look cool.
Not a bad shout, second comment to say the same 🤔
It's looking awesome. What about the wheels?
Thank you! They are coming in a future episode! Got to keep you all coming back!
Congrats on the 100k Dan well deserved. Watched all the videos and like the content. Started watching you with the T5 as I was looking for inspiration with my T5. Is the Lupo steering wheel and airbag for sale if so what sort of condition are they in? As I’d like to change the one on my T5. Looking forward to many more videos both here and at home with Abi. Loads of luck for the future. Here’s to the next 100k🍺🍺🍺
Thank you so much for watching and supporting the channel! It wasn't in the best condition and we ended up plying and se the airbag off 😂 sorry. We really need to film an episode on the house as so much has changed!
Good vid pal only just stumbled across your channel because of your caddy content but it’s a really good watch what steering wheel is it you have fitted to the lupo been looking at swapping mine
Keep the content coming 👍
Thank you for watching bud! it's an OMP 300mm one bud, I just searched that on eBay and found one. feels much better than the big original one.
Congrats on the subs. Why didn’t you just put the rear deck on blocks to lift it over the rear seat bracket?
Cheers bud. I wanted it to be as low as possible and supported by the metalwork of the car as I ended up using very thin plywood.
Can u put links in the description for the bar en the seats?
Whats going on with that steering wheel, is the quality VAG in the bin?
👍 👍 👍
Thank you!
Awesome buddy well done hope you well and recovering how do I claim my prize thanks stay strong 💪
I love them vw lupo’s was trying to get one for my first car but there was nothing for miles and miles from my area 🤦♂️😂 has to get a Ford Fiesta instead 💩😂
Tbf I have fancied owning one for a long time but never really had a reason to as they are so small! glad I finally have one now. Fiestas are cool 👀
You remind me of Colin furze are your relatives 😊
How much weight do you reckon you lost with stripping it? Looks really good already tbf
At a guess I think about 30kg. I am going to get it back on the weighbridge and see this week. It weighed 980kg and hasn’t used much fuel so should be quite accurate.
Yo man idk if youll see this but seems like u know what your doing my dash isnt working properly it sometimes works sometimes doesnt and glitches out and ive checked fuses they are okay any clue or ideas to fix??
Very good job. Your car has 5 or 6 gear?
Thank you! 6 gears
wheels!!!!
Good things come to those that wait 😂 Gotta keep you wanting more!
What glue do you use for the carpet? Also congratulations on 100k!
Thank you Andy! I used aerosol contact adhesive. Spray it on both surfaces, let it flash off and stick them together.
@@DanChambersDAC thanks dude!
👏👏👏👏💐💐💐
ZaLupo
Is it bad that I actually really like them stock wheels lol
Wanna buy them?! 😂
Have a Lupo GTI myself and it's very similar (even have Speedline track wheels for it😆) , would definitely recommend a spacer or quick release on the wheel to bring it a little closer for a nicer driving position, clubsport mod looks neat, definitely on my list now to do, good luck with the project and you should definitely check out Clayton Jones' GTI, nicest one in the world IMO
th-cam.com/video/fW-3MGG6jdc/w-d-xo.html
Clayton’s Lupo is epic, mate.😎
I did think a spacer on the wheel may make it a little better, will get in and have a measure up! The clubsport tidies the rear end up and save a bit of weight. Rear seats would not be useable with the buckets so worth doing. Clayton’s is the reason I bought one 😂
Cheers guys I appreciate it🤝🏼
great videos, you say erm to much
Great work mate! Looks super smart 🖤
Cheer Brother ❤️
Congratulations Dan well done fella good luck with the future on here 🎉
Thank you! Hopefully we keep growing!
You remind me of Colin furze are your relatives 😊
😂 I get that a lot! Maybe we should do a collab video!