Andy, thanks for the great video. I have the exact same drone and have just switched from PX4 to ArduPilot. Now I'm trying to do some tuning. I was wondering if you could share your tuning parameters from video? Thanks again.
@@yancymuu4977 happy to but note my settings rely on flashing bluejay and using bdshot. If you try the settings without this you will have problems because the filtering won’t work properly
Another question. I noticed that you used the "dshot" method to setup your escs with your 6X flight controller as opposed to one could say the "conventional method". Can one also do this with the 6C controller. I believe that the escs are the same hardware in the holybro kit. Thanks.
Hi Andy, Thanks for your videos. It's helping me a lot 🙂 I fly a large 23" Hex and followed your autotune-procedure and ended up with a very soft yaw. Then I did a Yaw-D tune, but it's still very soft. Is there anything I can do to tighten up the Yaw?
Andy, thanks for the great video. I have the exact same drone and have just switched from PX4 to ArduPilot. Now I'm trying to do some tuning. I was wondering if you could share your tuning parameters from video? Thanks again.
@@yancymuu4977 happy to but note my settings rely on flashing bluejay and using bdshot. If you try the settings without this you will have problems because the filtering won’t work properly
@@andypiper5285 ok, will change over the esc setup first.
Another question. I noticed that you used the "dshot" method to setup your escs with your 6X flight controller as opposed to one could say the "conventional method". Can one also do this with the 6C controller. I believe that the escs are the same hardware in the holybro kit. Thanks.
@@yancymuu4977 yes 6C and 6X are very similar hardware wise. But notice you will need to upgrade the ESC firmware
@@andypiper5285 will do that.
These are the parameters - www.dropbox.com/scl/fi/6d86fszfv5nj8rfhgdya8/Holybro-X500v2-Pixhawk6X.param?rlkey=aj9zttl5jcdbw7vlql4nm4egk&dl=0
again thanks. I have downloaded and will study it tomorrow. @@andypiper5285
Hi Andy, Thanks for your videos. It's helping me a lot 🙂 I fly a large 23" Hex and followed your autotune-procedure and ended up with a very soft yaw. Then I did a Yaw-D tune, but it's still very soft. Is there anything I can do to tighten up the Yaw?
What angle P did you get?