salut, am un stepway 2 (2015) cu veriunea 4.0.3; luat camera d p aliexp; cum pot activa (cabluri/mufe furnizate) camera folosind doar test mode coduri (d p display medianav) -daca se poate, ca ar fi niste video care par a indica ca e posibil dar pt versiuni mai actuale- ?
Unfortunately I cannot help you with that. This is an OE product and programming is performed ONLY in Dacia dealership. You have to use the CLIP tool for that activation. Sorry mate.
+Florin Lazar Nu Florin, nu se poate programa "de acasa". Este necesara programarea unitatii MediaNAV cu CLIP-ul. Pretul il poti afla cu un telefon la reprezentanta Dacia. N-ar trebui sa coste prea mult, este o operatiune de 5 minute. Bafta!
+Epure Florin Salut Florin, multumesc pentru aprecieri :) dar ceea ce este in aceste video-uri este munca multor colegi de-ai mei. Pentru detalii putem fi gasiti si pe adresa: suport-tehnic@falcon.ro. Oricum, instalarea acestor camere se poate face de catre orice reprezentanta/ service Dacia. Bafta!
Thanks for your great video. Do you (or someone else) perhaps know if the camera update also works with the Media Nav Evolution system ? Will CLIP unlock be required for the Evolution as well ? Thanks in advance.
Hi mate, For the camera from the video ( 8201595309) there is a replacement harness ( 8201674987) that works for Media Nav Evolution. There should be be a new camera (8201675484) available for Media Nav Evolution. Yes, the CLIP unlock it is always needed. Cheers!
Hi Ovidiu, Thanks for your answer. I googled the order codes that you gave me, and the new harness seems unfindable, and of the new camera kit I found a manual. I compared the installation manual of the new camera with the installation manual of 8201595516 (Logan MCV II) camera for media nav. And it seems like the new camera is a 6V camera that is powered directly from the Media Nav system. I guess this upgrade would solve the camera errors I read about as the cam is no longer powered from the reverse light. As you are quite knowledgeable of the Dacia order codes, do you perhaps know the order code for the new camera kit for the Logan MCV II ? As I ordered this car instead of the Sandero. Thanks in advance, Best Regards, Robin
Nice video, Iv recently installed this exact kit, it works perfectly but when changing back out of reverse to drive i get a message "cable unplugged or camera damaged." when the reverse trigger feed is cut from pin 3 of nav any ideas? SC005 in commands seems to crash on final validation aswell but when rescanned camera is enabled. any help would be great! thanks
+bob brown Thanks for the appreciations. I'm glad to be at help :). On the MediaNAV 2 unit - which are on the newer Dacia models - the reverse screen stays ON 5 seconds after the reverse gear is disengaged. The reverse camera is powered by the reverse signal so for that 5 seconds period the reverse screen is ON but camera is OFF and the MediaNAV unit reports faulty or disconnected camera. We already work on this issue and, hopefully, in short time at the Dacia dealer a new harness will be available. Cheers!
+Doc icSu You sir are a legend. I was sure this was the case. Pretty sure technical are not aware of this issue, have been sending off CIRs in regards to this issue past 2 days, ill send off a tech alert asap hopefully get a actis made up. Thanks again Doc
+bob brown Hi mate. The new harness already came in our warehouse. In a couple of days will be at Dacia CPS. So pretty soon should be available to order. Reference: 8201674987. Cheers!
Does this camera, wiring and installation work with Media Nav Evolution? In your video you do not connect the pins n. 9 and 21 with X3 and X4. Is there any reason for that? The instructions you used are labeled n. 8201595309 22/03/2016 I found on the Renault site the n. 8201675484 24/03/2016. What is the difference? Thanks
Perfectly good observation mate. 8201595309 reference it is for 12 volt camera that works just fine with first Media Nav version. The Evolution version added a 5 seconds delay after reverse gear it is disengaged. That result in 5 seconds of black screen with a defective or disconnected camera error message. For that reason a 6 volt camera was developed: 8201675484 where pins 9 and 21 is the power connections for that camera (no reverse light connection were necessary in the new installation guide). To get to your first question: if you have this camera (8201595309), to install it on Media Nav Evolution, you need an adapter cable (8201674987 - Wiring harness with converter for Rear view camera Nav 2.X). Cheers!
Hi Ovidiu, i have a Clio IV with MediaNav Evo installed, with the 6.0.3 firmware. I have the rear camera enabled (officially via Clip in dealer), and when I put reverse it actually says there is a problem or the camera is not connected (that's ok, because there is no camera installed :P) One question since there is few info for the Evolution series. Do I still need to connect to the Medianav the 12v signal, plus the 2 video signals? (positive/negative), or only the video cables? Are the pins in the Evolution different from the "old" Medianav? Do you have a reference for Clio camera? Thank you
Hi mate, I do not know what it is the Clio 4 camera reference number. Also I do not know how Medianav evo on Clio4 works but, if it is similar with Dacia, you do not need to feed the 12V reverse signal to unit (the unit already does switch to camera image - with error of course). On Dacia Medianav, the unit feeds delayed 6V for camera power so a 12V camera will not work properly.
Thank you so much. One more question....do you now if it's possible to activate the video input without the reverse gear? Some trigger like in the "old" medianav, that was triggered with the 12v input? Thank you again
+ولاية بوسعادة Unfortunately I cannot help you with that. This is an OE product and programming is performed ONLY in Dacia dealership. You have to use the CLIP tool for that activation. Sorry mate.
salut, am un stepway 2 (2015) cu veriunea 4.0.3; luat camera d p aliexp; cum pot activa (cabluri/mufe furnizate) camera folosind doar test mode coduri (d p display medianav) -daca se poate, ca ar fi niste video care par a indica ca e posibil dar pt versiuni mai actuale- ?
Salut, noi nu avem nevoie sa folosim coduri pentru activare, ci doar testerul DIAG de la Dacia. Sorry.
Salut, Ovidiu!
Ce interfata folosești pentru activarea funcției " Camera de marsarier "?
Mulțumesc
Salut, Bogdan.
Activarea am făcut-o cu CLIP-ul, testerul de service de la reprezentanta.
Toate bune!
Mulțumesc!
Hi,
If i well understand it have un update mandatory in the car software? Only Renault/Dacia can do that?
Unfortunately I cannot help you with that. This is an OE product and programming is performed ONLY in Dacia dealership. You have to use the CLIP tool for that activation. Sorry mate.
Multam. Caut tester deci!
Yep! Pentru putzin.
nice
pot face ceva asemanator si de acasa , daca nu cat costa programarea navigatiei pentru camera.
multumesc
+Florin Lazar
Nu Florin, nu se poate programa "de acasa". Este necesara programarea unitatii MediaNAV cu CLIP-ul.
Pretul il poti afla cu un telefon la reprezentanta Dacia. N-ar trebui sa coste prea mult, este o operatiune de 5 minute.
Bafta!
wow!!!!!!!
comment programer le caméra de recul sur Medianav evolution 6.3
Sal Doc.
Poti sa pui si pe logan MCV ?
Da se poate!
come si può collegare
thank you ....i need the flash
ok
datele de contact ale dvs ptr cei care vor sa lucreze cu un profesionist se pot da o adresa de e-mail sau un service unde va găsim?
+Epure Florin
Salut Florin, multumesc pentru aprecieri :) dar ceea ce este in aceste video-uri este munca multor colegi de-ai mei.
Pentru detalii putem fi gasiti si pe adresa: suport-tehnic@falcon.ro.
Oricum, instalarea acestor camere se poate face de catre orice reprezentanta/ service Dacia.
Bafta!
+Ovidiu Cuiesdean.
Salut, pentru un Mcv 2, camera se monteaza ca pentru Duster, fara a gauri tabla(doar suportul pentru numar)?
Multumesc.
Da, ca la Duster.
Multumesc.
Thanks for your great video.
Do you (or someone else) perhaps know if the camera update also works with the Media Nav Evolution system ?
Will CLIP unlock be required for the Evolution as well ?
Thanks in advance.
Hi mate,
For the camera from the video ( 8201595309) there is a replacement harness ( 8201674987) that works for Media Nav Evolution.
There should be be a new camera (8201675484) available for Media Nav Evolution.
Yes, the CLIP unlock it is always needed.
Cheers!
Hi Ovidiu,
Thanks for your answer.
I googled the order codes that you gave me, and the new harness seems unfindable, and of the new camera kit I found a manual.
I compared the installation manual of the new camera with the installation manual of 8201595516 (Logan MCV II) camera for media nav.
And it seems like the new camera is a 6V camera that is powered directly from the Media Nav system.
I guess this upgrade would solve the camera errors I read about as the cam is no longer powered from the reverse light.
As you are quite knowledgeable of the Dacia order codes, do you perhaps know the order code for the new camera kit for the Logan MCV II ? As I ordered this car instead of the Sandero.
Thanks in advance,
Best Regards,
Robin
Thanks for the appreciations, Robin.
Yes the new camera is a 6V camera.
For the Logan MCV: 8201675482.
Nice video, Iv recently installed this exact kit, it works perfectly but when changing back out of reverse to drive i get a message "cable unplugged or camera damaged." when the reverse trigger feed is cut from pin 3 of nav any ideas? SC005 in commands seems to crash on final validation aswell but when rescanned camera is enabled. any help would be great! thanks
+bob brown
Thanks for the appreciations. I'm glad to be at help :).
On the MediaNAV 2 unit - which are on the newer Dacia models - the reverse screen stays ON 5 seconds after the reverse gear is disengaged. The reverse camera is powered by the reverse signal so for that 5 seconds period the reverse screen is ON but camera is OFF and the MediaNAV unit reports faulty or disconnected camera.
We already work on this issue and, hopefully, in short time at the Dacia dealer a new harness will be available.
Cheers!
+Doc icSu
You sir are a legend.
I was sure this was the case.
Pretty sure technical are not aware of this issue, have been sending off CIRs in regards to this issue past 2 days, ill send off a tech alert asap hopefully get a actis made up.
Thanks again Doc
+bob brown
Hi mate. The new harness already came in our warehouse. In a couple of days will be at Dacia CPS.
So pretty soon should be available to order.
Reference: 8201674987.
Cheers!
Multumesc frumos!
Pentru putin!
Interesant video ! Multumesc
+Marian Minciu
Multumesc pentru aprecieri. Placerea e de partea mea :)
Does this camera, wiring and installation work with Media Nav Evolution?
In your video you do not connect the pins n. 9 and 21 with X3 and X4. Is there any reason for that?
The instructions you used are labeled n. 8201595309 22/03/2016
I found on the Renault site the n. 8201675484 24/03/2016. What is the difference?
Thanks
Perfectly good observation mate.
8201595309 reference it is for 12 volt camera that works just fine with first Media Nav version. The Evolution version added a 5 seconds delay after reverse gear it is disengaged. That result in 5 seconds of black screen with a defective or disconnected camera error message. For that reason a 6 volt camera was developed: 8201675484 where pins 9 and 21 is the power connections for that camera (no reverse light connection were necessary in the new installation guide).
To get to your first question: if you have this camera (8201595309), to install it on Media Nav Evolution, you need an adapter cable (8201674987 - Wiring harness with converter for Rear view camera Nav 2.X).
Cheers!
Thanks very much!
I will buy the last 8201675484 just to avoid any problem.
Ciao!
Hi Ovidiu, i have a Clio IV with MediaNav Evo installed, with the 6.0.3 firmware. I have the rear camera enabled (officially via Clip in dealer), and when I put reverse it actually says there is a problem or the camera is not connected (that's ok, because there is no camera installed :P)
One question since there is few info for the Evolution series. Do I still need to connect to the Medianav the 12v signal, plus the 2 video signals? (positive/negative), or only the video cables? Are the pins in the Evolution different from the "old" Medianav? Do you have a reference for Clio camera? Thank you
Hi mate, I do not know what it is the Clio 4 camera reference number. Also I do not know how Medianav evo on Clio4 works but, if it is similar with Dacia, you do not need to feed the 12V reverse signal to unit (the unit already does switch to camera image - with error of course).
On Dacia Medianav, the unit feeds delayed 6V for camera power so a 12V camera will not work properly.
Thank you so much. One more question....do you now if it's possible to activate the video input without the reverse gear? Some trigger like in the "old" medianav, that was triggered with the 12v input?
Thank you again
per per renault Megane 4
Hi,
This unit it is designed for Dacia only. Sorry.
please i need the programme!!
+ولاية بوسعادة
The programming must be done by the Dacia dealership VIA CLIP service tool.
Cheers!
Agency Dacia far Me and I programmed myself...please!!
+ولاية بوسعادة
Unfortunately I cannot help you with that. This is an OE product and programming is performed ONLY in Dacia dealership. You have to use the CLIP tool for that activation. Sorry mate.
Ceva date de contact ?
+Cosmin Stroie
Orice dealer Dacia. Produsul este piesa de origine.
Salut, sunt si eu interesat, ma poti contacta ?
Salut, nu este nevoie sa ma contactezi pe mine. Găsești camera la orice dealer Dacia. Baftă!
Ovidiu Cuiesdean voiam sa te intreb de alta problema . activare computer bord din soft?
Tot la Dacia se face activarea. Cu CLIP-ul.
Ovidiu Cuiesdean ma poti ajuta cu un pret te rog ?
Din pacate, nu. Produsul se comercializeaza doar prin reteaua Dacia. Ei te pot ajuta cu pretul.