My metal gear servo perfectly worked with this bottle, it pumping soap from that bottle. You may require higher torque servo motor if the spring inside your bottle pump is hard enough.
Hola me gusta mucho tu video. Quiero hacer uno, pero no se como se llama la electronica que pones detras del bote. No se ve la referencia para pedirlo. Espero tu respuesta. Gracias.
buenas noches excelente proyecto, una consulta estoy usando un servo 9G pero no hace nada al compilar el proyecto no me da ningun error, ¿ que voltaje estas usando para el arduino nano? gracias
Sketch uses 2,656 bytes (8%) of program storage space. Maximum is 30,720 bytes. Global variables use 54 bytes (2%) of dynamic memory, leaving 1,994 bytes for local variables. Maximum is 2,048 bytes. avrdude: ser_open(): can't open device "\\.\COM3": The system cannot find the file specified. Problem uploading to board. See www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
Dear Newbies you are not going to get soap pumped up by using thos MG-90 or SG-90 servos as they have low torque use bigger and more powerfull servo to do this. As you can see he didn't showed us the demo with liquid in it reason because that servo was n't able to pump it up.
It depends on the spring inside the pump the bottle i am using, pumps the soap perfectly, but some of the bottle may not, so the bigger servos with higher torque me be required. I didnt demonstrate the soap being pumbed because due to virus situation I dont want to waste those soap as there are out of stock in shops. But this servo works with this bottle. Thanks for the reminder i will pin this information so that other people using different bottle will get some information of servos
My metal gear servo perfectly worked with this bottle, it pumping soap from that bottle.
You may require higher torque servo motor if the spring inside your bottle pump is hard enough.
Just try it with soap inside! Viscosity will also affects it's operation! I just did try! Dint Work out!
How Can I contact you ?
Excellent project 👍
Good project👍👍
great project!!
great project :)
Amaxing!
Wow Bro !!! U are very intelligent but i Had a question that can we use sg90 instead of the servo u used in the video??
Hola me gusta mucho tu video. Quiero hacer uno, pero no se como se llama la electronica que pones detras del bote. No se ve la referencia para pedirlo. Espero tu respuesta. Gracias.
Good
buenas noches excelente proyecto, una consulta estoy usando un servo 9G pero no hace nada al compilar el proyecto no me da ningun error, ¿ que voltaje estas usando para el arduino nano? gracias
Which software do u use to draw your circuit diagrams?
Gréât video
Thanks a lot.
Osm
Thank yoo 😘😘😘😘
Which company hand wash bottle mostly use because some hand wash bottle are not easily down pressure of servo motor
can i use for stm32f103c8 blue pill to replace arduino nano?
Nice dispenser. If it can be made easier to refill the bottle it would be even better
Bro where can i get this green sheet which you use in all your videos
What software you are using for circuit making
Good idea, but on brightest light IR Sensor can do unexpected reaction
👍👍
Will it work using a low torque motor
Can servo sg90 also be used?
Hello please what's the names of the cable that you use forthat i can buy it
I want to learn arduino programming. Can u please help me or u have any lectures?
Mind blowing vice car robot
Hi..can you design low cost medical ventilator specially for COVID 19 patients? I believe, if you try, you can definitely make it possible.
Bro ardino neno or ardino uno? & Water damage nahi hoga kay
Can we use ir sensor transistor
What kind of soap bottle are you using here?
🤘🤘🤘🤘
O ideal é usar uma fonte externa para o servo motor
Can we use 9v battery instead of usb bro
Hey..... Please just anyone ensure me that can the servo break? I mean the gears
Do you have the code under the software Pycharm?
I had made this project a few days ago with almost same concept
Have a look
Great👍 keep on sharing and spread awareness on other social platforms also so people can make and use it.
@@ViralScienceThanks, & i am using Facebook & Instagram to promote my channel 😊
Bro wats your age
You r really amazing u r my idol keep making these love from India
I am 20
Can I use arduino uno ?
The code uploaded by you is correct?..since it's very short compared to other codes for this same project
Kindly confirm it ASAP!
ഈ ചിത്രം എങ്ങനെ വരക്കുന്നത് ഏത് ആപ്പില് ? പറയൂ പ്ലീസ്
You are amazing. I want to learn arduino programming. Can u please help me or u have any lectures?
project rbt lah jadinya
output from sensor is 5 vdc can used trigger relay for move a motor...i think this is a simple ..not used arduino
Bro can you tell which is the software you used to make circuit diagram
Fritzing
Does it requires money for buy it
Make a smart glass with arduino
This is great! Do you have part number or links to the items pls?
Bro arduino nano =arduino uno use🤔🤔🤔
I have required the code please kindly share you me
Hi bro nice project bro 👍👍👍👍👍
Did u receive the parcel of esp32 cam
Yes bro i received it yesterday
Next video will try to make on it
@@ViralScience ok bro thank you very much bro 👍👍👍👍👍👍👍😍😍😍
Bro,I am doing this with a Arduino UNO board .Is Arduino code
is same?
yes
Place make a tuch sensor in low price
Already made video on touch sensor
Bro Servo is continuously moving without sensing
Your servo may not be working properly
Try using another servo
@@ViralScience check that sensor input
Sketch uses 2,656 bytes (8%) of program storage space. Maximum is 30,720 bytes.
Global variables use 54 bytes (2%) of dynamic memory, leaving 1,994 bytes for local variables. Maximum is 2,048 bytes.
avrdude: ser_open(): can't open device "\\.\COM3": The system cannot find the file specified.
Problem uploading to board. See www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
i am new in arduino, what to do in this error ?
Try changing the cable you are using or unplug and reconnect
and they will never get wet
Dear Newbies
you are not going to get soap pumped up by using thos MG-90 or SG-90 servos as they have low torque
use bigger and more powerfull servo to do this.
As you can see he didn't showed us the demo with liquid in it reason because that servo was n't able to pump it up.
It depends on the spring inside the pump the bottle i am using, pumps the soap perfectly, but some of the bottle may not, so the bigger servos with higher torque me be required.
I didnt demonstrate the soap being pumbed because due to virus situation I dont want to waste those soap as there are out of stock in shops. But this servo works with this bottle. Thanks for the reminder i will pin this information so that other people using different bottle will get some information of servos
@Kiel Cabusao i knew it
, use bigger metal gear servo motor that will work
Whats your recomended servo ? Servo mg996 its work ? The servo have 10kg torque
@@iki4865 yeah that will work
I have tried with 2 servo mg90s, it works. But the result not optimal, just come out a little.