That's not fat wood it's wood covered in wax. That being said I'd like to see how well it takes a spark. Fatwood has turpenes in it which are highly flammable and will easily take a spark.
damionscreations if he did it as wood disc torches lime I make with wood shavings it would light well. This is nothing in relation to fatwood but is a good idea. My torches light up ok but you need a steady flame to light it and sparks won't work. It's great to keep a fire going. Not starting one.
Agreed I've tried several recipes and we'll keep trying to see if I can make some at home if I ever find a mix that will ignite up of a spark from wood shavings I will post a video and it will say how to make real fatwood at home not how to make wooden candle. My first experiment was with turpentine and pine gum and it worked okay but was not able to start just from one Spark but this is after it is set in dried over a few weeks and I will keep trying and researching until I find something that works. Right now I just use charcoal off and a spark
been using fatwood for 50 years; never thought about making my own. in this area, lots of softwood forests, and my teacher taught me to find fatwood, "Go to the living (trees) and take the dead (branches)." They are excellent fatwood, although we didn't call it fatwood, but kindling. a misnomer, since it wasn't small stuff, but fine stuff. Good illustration of valuable survival technique.
I made fatwood by transplanting an unwanted pine tree into my yard and let it grow for a few years and then cut off the top about four feet above the ground. It is always ready to go when I need some fatwood.
Glad you like it. If possible, really let that stuff soak in for a while. A good (safe) boil will really impregnate the wood with wax. Thanks for the comment.
Have you experimented with different techniques such as drilling tiny holes into the wood prior to soaking in wax to maximize surface area and allow a more thorough and consistent absorption of wax throughout? Then you can take a portion of the shavings and grind them into finer dust-like particulates and finally soak all of the different batches in wax for varying times. In theory, it would seem that the varying degrees of the surface area should result in yields where each formulation has a different concentration of wax to serve different purposes.
WARNING!!! Never heat/melt wax on a direct flame!!! IT CAN IGNITE!!! Always use a water bath (pot with wax in pot with water) this way u ensure the wax never reaches temperature above 100 degrees Celsius!
if you dont use a double boiler you just need a lid that can be set on the wax melt dish that fit tight and extinguish the flames ... and as most wax we get in north america has a flash over temp of 130f it wont generally ignite on med to low heat ... beeswax will ignite about 90f ... which is the most common cause of wax fires on a direct heat source
Does the wax get deep into the wood, or is it only on the outside? Im a bit corious, because I made a batch today, and it wasnt colored on the inside when I split the wood, which made me doubt I had done it right!
I've used store-bought natural fatwood before (semi-arid climate here...no pines), and found the natural resin stuff works well but is incredibly smokey. It looks like your wax-based fatwood burns at least as well and without the thick black smoke. I'll be making some soon! Thanks for posting.
Made some more today, and did just that! I need to get a big vat sometime though. I'll definitely be on the lookout at the scrapyard for a stainless or cast iron pot on the cheap.
good tip , the knife resembles one I got from flea market recently mine is Shur Edge never heard of it til now, do you know the brand of your in the vid? thx
Yes. If you have a bunch of real pine pitch, melt it carefully and cook it as he showed here. I would imagine that's about as close as you can get to real fatwood
I make my Fatwood starters with the aid of Mother Nature. Locate a down , dead , rotten pine tree or stump. Knock off the rotten wood and get to the solidified heart of the tree. Cut it in lengths about the same as wooden matches. Take that block of REAL FATWOOD and split it into pieces about the same size as wood match pieces. A little of it goes a long way when you use it. Real Fatwood is the solidified heart of the Pine tree and you can tell real easy since it smells like solid turpentine. Your title is wrong and misleading , yours is not fatwood but just wood soaked in wax. Mother Nature makes Fatwood , people don't. What you are doing you could do it quicker and easier with sawdust.
That's exactly what I was thinking when I saw the title. "You don't make fatwood, mother nature does, you just go find it." We always called it pine knot, but it's the same thing.
I used to do something like this. I would take cardboard boxes with thick walls And cut strips and wrap them around popsicle sticks, put a cotton ball on 1 side then tie it with a string. Then dip it into the melted wax and saturate it then let cool. They would light quite easy and burn a good length of time. The cotton ball would usually light with 1 stroke of a ferro rod and it would blaze away. 🔥 good video good tip
This is very interesting and I'll have to try it out! Something I find useful when melting wax/paraffin (I've used this for candles and waxing cheese): I use an inexpensive tapered steel pie pan with the painted "nonstick" coating over a pot of boiling water. Once cooled the wax easily slips out of the pie pan. I don't know if the wax will get hot enough that way to permeate the wood, though, but it won't get hot enough to smoke or ignite. I'll give it a try and see how it permeates the wood.
Real fat wood can be found in every pine tree around the world even in dead pine trees. It is always found in the roots of the tree as well as any spots where the tree has had to heal it self.
+Precious Roy dude, when I was chilling out in South Carolina and Alabama I was so happy to see that. west Texas doesn't get that awesomeness like that. I looked around thought I had died and gone to heaven! I mean I literally looked down along the trail I was walking and saw a huge gem of a fatwood ball....all I had to do was take my knife and separate it from the limb that had fallen. I just stared at it like it was the golden skull from the lost ark movie. damn son, to get something like that in certain parts of Texas would mean a midnight raid on farmer browns ranch hoping like hell he don't hear you politely removing sweet, sweet fatwood from his precious wind breaking pines:) you and Andrew are truly blessed!
Come to central and east Texas, we got plenty of it around here. The best I have seen came from a pine that was struck by lightning, I still have a bucket of it. The stuff was thick with resins is translucent and looked almost like amber, you can see light through 1" thick chunk of it. I use it to make handles for 3/8" ferro rods and tie a little chunk of hacksaw blade to it. All in one waterproof fire starting kit.
Where can I get a little hatchet like that!?! Also, what kind of wax are you using? Can you buy it in bulk? Or do you just chop up cheap candles? Cheers mate
I use cotton balls with vasoline as well. I store them in empty pill bottles that prescriptions come in. I also buy those flat cotton pads that are circular for ladies to remove makeup. Basically they’re flat cotton balls lol. I put 2-3 in the bottom of the pill bottle then add some 91% isopropyl alcohol till they’re soaked. After that I put 2-3 of the cotton balls with vasoline on top of them. Then a few more of the alcohol soaked pads and keep alternating those until the bottle is full, put the cap on and done. When I want to start a fire I pull out a flat pad and/or a cotton ball and use my ferro rod. I usually get ignition on the first strike. I’ve been using these for the last 10 years or so and have consistent results. Cheers mate and happy trails
Thanks for the video. I just tried it a couple of hours ago with my left over pine kindling. I was skeptical coz it doesn't seem like the wax will fully infuse the sticks. I split one stick in half and true enough the centre was pretty dry. Nevertheless I did a before and after thing and the waxed stick lit up like charm with a nice bright flame just like your vid.. I'll experiment a bit more. Thanks for the tip.
The knife on the back of the workbench? That looks like what my dad always called a "butcher's knife", which was what we always had in the kitchen. They've been replaced by "chef's knives". I haven't been able to find a knife like that in some time.
Here in Australia, we don't have any natural fatwoods that I'm aware of. With your hardwood, can you shave and feather it, in the same way as a natural!?
I used a 2x4 clear ceader bord I had on hand. I used some paraffine wax and some red colored wax and used a thin can in a water pot on the Stove. Did 4 pieces at a time pieces 3/4 by 3/4 by 5 inches about 20 pieces were cut with a band saw. It Took a while to prep until the bubbling was done. Used the outdoor range hood vent. Tried it afterwards and lights up right away with a lighter. Shaved some and ignited with a ferro rod. Thanks I have never tried fat wood before. Worked great. Very thankful.
Survival 4 four Thank you this is exactly what i came down here to say. While wax will make them burn longer but the wax itself isn't flammable while fatwood sap is HIGHLY flammable. Also wax will leave a mess because it doesnt burn yet the sap will consume itself.
I was skeptical as you were making this with plain wax and natural fatwood contains highly flammable turpene. As you showed this easy to make fatwood burns exceedingly well. Thanks a lot for the great recipe!!
I suppose if natural fat wood or “fire knot” were not so plentiful and readily available for me to forage in my area, I’d resort to a manufactured technique, but what makes evergreen sap combustible is the sap; the evergreens sap is turpentine; so my question is, can you scrape this wax soaked wood with the spine of your knife and ignite the scrapings with a ferro rod? Or do you need to solely use a lighter or match?
Thanks for the video. I have made "fat wood" in a similar process using pine sap. Your method is a lot cleaner than mine. I will have to try it with wax. Keep up the good work.
I learned a lot of this video. I didn't know that I kan make fatwood with wax from a candle. thank you for this lesson. Daniel Vos, 17 year, from Holland. beginner with survival
well its been a few years since you did this video but i gotta say im glad it is still here for guys like meto watch. i was thinking about trying this as a fire starter. it sure looks like it does, thanks, i will look for more from you.
steric acid powder will harden the wax more .. about 1tbsp to a half pound will make a 1 hour votive candle burn just shy of 2 hours ... for arizona i would recommend 3 tbsp to a half pound of wax ... except for the extremely over hot days it should be fine
thanks for sharing hadn't thought to use candle wax because i've been looking for natural fatwood or at least damaged pine trees in the woods behind where i live unfortunately only oak and walnut grow there so i was at a loss. Just wanted to also note that a "real woodsman" would probably not be using store bought candles/WAX to create fatwood when all of the ingredients needed could be found in a natural "WOODSY" setting
Nice! , thank you for sharing!, Iv been toying with soaking pine in WD40with some good results but Iv never thought to boil the wood in wax, are you upseing bees wax or paraffin? Xx
Great method ! Until now I've made firestarters the same way only using toilet paper,soaking it in wax.They work amazingly well and one small piece burns for at least 2 minutes,more than enough to start a fire.
would had been interesting to see a cross cut stick of the dunked pieces of soft and hard wood to see the wax penetration thru the center or did it just stayed at the edges...but great idea, might have to try this.
It would be neat to see how well this might work with a vacuum chamber to stabilize the wood with a wax/turpentine mixture. Now that would be some legit synthetic fatwood.
This project kinda reminds me of a Cardboard Candle, saturated in wax..aka 'Buddy Burner' . I like that your recycling , reusing your wax from old candles. Nice ;-)) Cheers
I like it. I have lots of scrap wood and leftover candle wax from various projects. My one note would be to use the double boiler method to melt the wax. Melting over an open flame can overheat the wax and that could be painfully bad. Other than that, nice!
If you are looking to make fatwood, you either have none readily available near you, or cannot harvest it and are looking for alternative ways to make something that performs very similarly. In this video, you will learn just that.
But it doesn’t perform similarly, it will burn I’ll give you that but with true fatwood you only a small pile of shavings....a piece the same size as yours would be enough for multiple fires.. Have ever actually used true fatwood?
Iron Wolf Industrial *HOW ARE YOU HOLDING YOUR CAMERA???* I notice you using both your hands & your camera move with your head. Is it strapped to your forehead some how? Great video, by the way! ☺🌲
I used a GoPro Camera that was on a head strap. They are very popular and high quality units, and are great for stuff such as this. Thanks for the comment
Popcicle sticks soaked in turpintine and then dipped in wax is easy and burns readily,there already cut to length easy to stack and carry
I would like to use mustard oil instead
That actually sounds like a good idea. Thanks..
I just boil some good old pine sap and stick my wood in that
Lol... "let me light this match with this blowtorch"
lol
That’s what I thought. Lol
That's not fat wood it's wood covered in wax. That being said I'd like to see how well it takes a spark. Fatwood has turpenes in it which are highly flammable and will easily take a spark.
Couldn't you add some turpentine to the wax?
Bill45a1 fumes would be dangerous af.....I'm not sure but it might catch fire lol
damionscreations if he did it as wood disc torches lime I make with wood shavings it would light well. This is nothing in relation to fatwood but is a good idea. My torches light up ok but you need a steady flame to light it and sparks won't work. It's great to keep a fire going. Not starting one.
The wax already contains paraffin, so the turpentine won't be much help, I imagine.
Agreed I've tried several recipes and we'll keep trying to see if I can make some at home if I ever find a mix that will ignite up of a spark from wood shavings I will post a video and it will say how to make real fatwood at home not how to make wooden candle. My first experiment was with turpentine and pine gum and it worked okay but was not able to start just from one Spark but this is after it is set in dried over a few weeks and I will keep trying and researching until I find something that works. Right now I just use charcoal off and a spark
been using fatwood for 50 years; never thought about making my own. in this area, lots of softwood forests, and my teacher taught me to find fatwood, "Go to the living (trees) and take the dead (branches)." They are excellent fatwood, although we didn't call it fatwood, but kindling. a misnomer, since it wasn't small stuff, but fine stuff. Good illustration of valuable survival technique.
I made fatwood by transplanting an unwanted pine tree into my yard and let it grow for a few years and then cut off the top about four feet above the ground. It is always ready to go when I need some fatwood.
I'm in the freaking jungle. Their are no pine trees. This technique will do just fine. Thanks for the video.
Glad you like it. If possible, really let that stuff soak in for a while. A good (safe) boil will really impregnate the wood with wax. Thanks for the comment.
Have you experimented with different techniques such as drilling tiny holes into the wood prior to soaking in wax to maximize surface area and allow a more thorough and consistent absorption of wax throughout? Then you can take a portion of the shavings and grind them into finer dust-like particulates and finally soak all of the different batches in wax for varying times. In theory, it would seem that the varying degrees of the surface area should result in yields where each formulation has a different concentration of wax to serve different purposes.
I thing putting a wax sealant over real pine fat wood would be a good thing so that the turpentine wouldn't evaporate over time
I'm glad someone agrees with me. Soft wood better penetration.
WARNING!!! Never heat/melt wax on a direct flame!!! IT CAN IGNITE!!! Always use a water bath (pot with wax in pot with water) this way u ensure the wax never reaches temperature above 100 degrees Celsius!
Philip Pec I burned my aunts eyebrows doing that.... that and throwing cold water on it... lol
if you dont use a double boiler you just need a lid that can be set on the wax melt dish that fit tight and extinguish the flames ... and as most wax we get in north america has a flash over temp of 130f it wont generally ignite on med to low heat ... beeswax will ignite about 90f ... which is the most common cause of wax fires on a direct heat source
same with pine pitch, that stuff just wants to ignite given direct heat
Electric hot plate would work too
this is apparently a “non pansy” method per the opening of the video.
Does the wax get deep into the wood, or is it only on the outside? Im a bit corious, because I made a batch today, and it wasnt colored on the inside when I split the wood, which made me doubt I had done it right!
If you boil the wax in long enough, it does fill up the grains in the wood. Try boiling for longer.
Ok, I'll try that next time - Thanks for your reply :)
I've used store-bought natural fatwood before (semi-arid climate here...no pines), and found the natural resin stuff works well but is incredibly smokey. It looks like your wax-based fatwood burns at least as well and without the thick black smoke. I'll be making some soon! Thanks for posting.
Made some more today, and did just that! I need to get a big vat sometime though. I'll definitely be on the lookout at the scrapyard for a stainless or cast iron pot on the cheap.
I used this method and it worked just great , I used a old candle and some wood I found in a skip and it caught so quickly
Thank you for the video
Can be any type of candel? And can has a aroma or got noting to do with it and still works.
How well does the fatwood bench burn?
good tip , the knife resembles one I got from flea market recently mine is Shur Edge never heard of it til now, do you know the brand of your in the vid? thx
Appreciate the time and effort you put into making this video...thumbs up 👍
Could you put the hot wax in a jar add the wood and use a vacuum sealer to pull the air out and make the wax go in the wood?
Just watched your video, how about melting in some pine pitch also, would this make it a bit easier to light??
Yes. If you have a bunch of real pine pitch, melt it carefully and cook it as he showed here. I would imagine that's about as close as you can get to real fatwood
I make my Fatwood starters with the aid of Mother Nature. Locate a down , dead , rotten pine tree or stump. Knock off the rotten wood and get to the solidified heart of the tree. Cut it in lengths about the same as wooden matches. Take that block of REAL FATWOOD and split it into pieces about the same size as wood match pieces. A little of it goes a long way when you use it.
Real Fatwood is the solidified heart of the Pine tree and you can tell real easy since it smells like solid turpentine.
Your title is wrong and misleading , yours is not fatwood but just wood soaked in wax. Mother Nature makes Fatwood , people don't.
What you are doing you could do it quicker and easier with sawdust.
+Chuck Littleton Ahh, Shut The Hell Up
No Manners ( AKA Marley ) is alive and well.
That's exactly what I was thinking when I saw the title. "You don't make fatwood, mother nature does, you just go find it." We always called it pine knot, but it's the same thing.
Good times , I have thousands in the woods around me and never have to buy any fatwood. Ha Ha Ha.
Then you are looking for Phat wood:)
I used to do something like this. I would take cardboard boxes with thick walls And cut strips and wrap them around popsicle sticks, put a cotton ball on 1 side then tie it with a string. Then dip it into the melted wax and saturate it then let cool. They would light quite easy and burn a good length of time. The cotton ball would usually light with 1 stroke of a ferro rod and it would blaze away. 🔥 good video good tip
This is very interesting and I'll have to try it out!
Something I find useful when melting wax/paraffin (I've used this for candles and waxing cheese): I use an inexpensive tapered steel pie pan with the painted "nonstick" coating over a pot of boiling water. Once cooled the wax easily slips out of the pie pan. I don't know if the wax will get hot enough that way to permeate the wood, though, but it won't get hot enough to smoke or ignite. I'll give it a try and see how it permeates the wood.
Real fat wood can be found in every pine tree around the world even in dead pine trees. It is always found in the roots of the tree as well as any spots where the tree has had to heal it self.
Andrew Harris The entire SouthEast US is a fatwood goldmine.
Same with up here in the north east.
+Andrew Harris thanks for the heads up. most of us had no idea.
+Precious Roy dude, when I was chilling out in South Carolina and Alabama I was so happy to see that. west Texas doesn't get that awesomeness like that. I looked around thought I had died and gone to heaven! I mean I literally looked down along the trail I was walking and saw a huge gem of a fatwood ball....all I had to do was take my knife and separate it from the limb that had fallen. I just stared at it like it was the golden skull from the lost ark movie. damn son, to get something like that in certain parts of Texas would mean a midnight raid on farmer browns ranch hoping like hell he don't hear you politely removing sweet, sweet fatwood from his precious wind breaking pines:) you and Andrew are truly blessed!
Come to central and east Texas, we got plenty of it around here. The best I have seen came from a pine that was struck by lightning, I still have a bucket of it. The stuff was thick with resins is translucent and looked almost like amber, you can see light through 1" thick chunk of it.
I use it to make handles for 3/8" ferro rods and tie a little chunk of hacksaw blade to it. All in one waterproof fire starting kit.
Just wondering what kind of wax you used? Great video by the way.
Where can I get a little hatchet like that!?! Also, what kind of wax are you using? Can you buy it in bulk? Or do you just chop up cheap candles?
Cheers mate
Just old melted down candles. Chop em up, melt em down!! Lots of fun, thanks for the comment
I use cotton balls with vasoline as well. I store them in empty pill bottles that prescriptions come in. I also buy those flat cotton pads that are circular for ladies to remove makeup. Basically they’re flat cotton balls lol. I put 2-3 in the bottom of the pill bottle then add some 91% isopropyl alcohol till they’re soaked. After that I put 2-3 of the cotton balls with vasoline on top of them. Then a few more of the alcohol soaked pads and keep alternating those until the bottle is full, put the cap on and done. When I want to start a fire I pull out a flat pad and/or a cotton ball and use my ferro rod. I usually get ignition on the first strike. I’ve been using these for the last 10 years or so and have consistent results.
Cheers mate and happy trails
Great stuff, I'll have to keep this one in mind. Thanks for the comment
Did u use a blow torch to light a match to light the fire
Thanks for the video. I just tried it a couple of hours ago with my left over pine kindling. I was skeptical coz it doesn't seem like the wax will fully infuse the sticks. I split one stick in half and true enough the centre was pretty dry. Nevertheless I did a before and after thing and the waxed stick lit up like charm with a nice bright flame just like your vid.. I'll experiment a bit more. Thanks for the tip.
Perfect!
I’m a knife geek-
Excuse me for asking, what knife is that?
The knife on the back of the workbench? That looks like what my dad always called a "butcher's knife", which was what we always had in the kitchen. They've been replaced by "chef's knives". I haven't been able to find a knife like that in some time.
Would a store bought piece of red oak work like a 2x4 of something work as well?
What kind of wax do you use? I tried igniting paraffin wax and it's not remotely flammable.
Hi, may i know what kind of wax u r using? Or it works for any kind of wax
Here in Australia, we don't have any natural fatwoods that I'm aware of. With your hardwood, can you shave and feather it, in the same way as a natural!?
What exactly does the wax do for the wood to make it more flammable? I was under the inpression that wax impedes burn, hence why candles last so long.
You gotta wonder if this method would work on a larger scale such as with small logs for the fireplace.
How does it work with catching a spark like real fatwood?
Is there any particular reason you chose to use the Crysis 2 main theme as the uncredited opening to this video?
I used a 2x4 clear ceader bord I had on hand. I used some paraffine wax and some red colored wax and used a thin can in a water pot on the Stove. Did 4 pieces at a time pieces 3/4 by 3/4 by 5 inches about 20 pieces were cut with a band saw. It Took a while to prep until the bubbling was done. Used the outdoor range hood vent. Tried it afterwards and lights up right away with a lighter. Shaved some and ignited with a ferro rod. Thanks I have never tried fat wood before. Worked great. Very thankful.
Will it start with just a ferro rod
I want that tiny hatchet. WHERE DID YOU GET THAT TINY HATCHET??
DulishusWaffle they’re called froeing hatchets and you can buy them from several outdoors shops
link one, i can't seem to find googling the name you used. thanks
Try looking under "carpenter's hatchet"
its a carpenters tool not a camp tool ... so home hardware or any other tool supply place will carry them if they are any good
how do you get fatwood from wood and wax sorry guy fat wood is not wax covered wood..
Survival 4 four just a thought is that he is making something similar by impregnating the wood with oils, similar to sap in fatwood
Survival 4 four uh, yes, it is
Knock off fat wood works better than the real thing
Survival 4 four Thank you this is exactly what i came down here to say. While wax will make them burn longer but the wax itself isn't flammable while fatwood sap is HIGHLY flammable. Also wax will leave a mess because it doesnt burn yet the sap will consume itself.
No it doesn't. There is turpentine in real fatwood. What's so hard about collecting some in the woods?
I was skeptical as you were making this with plain wax and natural fatwood contains highly flammable turpene. As you showed this easy to make fatwood burns exceedingly well. Thanks a lot for the great recipe!!
I suppose if natural fat wood or “fire knot” were not so plentiful and readily available for me to forage in my area, I’d resort to a manufactured technique, but what makes evergreen sap combustible is the sap; the evergreens sap is turpentine; so my question is, can you scrape this wax soaked wood with the spine of your knife and ignite the scrapings with a ferro rod? Or do you need to solely use a lighter or match?
What would you recommend for a good bushcraft belt that also has to hold your pants up? leather? nylon?
Can i mix the wax with overaged oil and other cooking fats?
Really liked the way you used the hard and soft wood together!
Thanks for the video. I have made "fat wood" in a similar process using pine sap. Your method is a lot cleaner than mine. I will have to try it with wax. Keep up the good work.
+David Chouiniere the sap is great but, messy and sticky as hell.
Please let me know as to were you got that tiny hatchet. Thank you.
I learned a lot of this video. I didn't know that I kan make fatwood with wax from a candle. thank you for this lesson.
Daniel Vos, 17 year, from Holland. beginner with survival
Technically... you can't.
what kind of wax is it? can i use candles tipe?
Couldn't you add some turpentine to the wax? Not a lot but enough to light with sparks?
well its been a few years since you did this video but i gotta say im glad it is still here for guys like meto watch. i was thinking about trying this as a fire starter. it sure looks like it does, thanks, i will look for more from you.
where was the wax made? was it crappy wax from china? or the best wax in the world, from muricah?
He's just clear and plain..straight up RACIST doing Racist and crappy type copy videos..haha
Here is Arizona i would think the wax would all melt out before they could be used
steric acid powder will harden the wax more .. about 1tbsp to a half pound will make a 1 hour votive candle burn just shy of 2 hours ... for arizona i would recommend 3 tbsp to a half pound of wax ... except for the extremely over hot days it should be fine
Could you do this with an electric pressure cooker on low pressure?
what about using gasoline then letting that dry,,, Would that work?
I always have a difficult time finding fatwood. Thank you for doing this!
Do you use ordinary candle wax or beeswax?
what kind (what name) wax did you use?
What the sort of wax do you use.??🤔
If the work surface is already covered in wax, why not just plane it down and use the shavings?
Where do you purchase your wax? Looking for bulk…
thanks for sharing hadn't thought to use candle wax because i've been looking for natural fatwood or at least damaged pine trees in the woods behind where i live unfortunately only oak and walnut grow there so i was at a loss. Just wanted to also note that a "real woodsman" would probably not be using store bought candles/WAX to create fatwood when all of the ingredients needed could be found in a natural "WOODSY" setting
What is the song that plays in the beginning of this video?
I always wondered what you could use if you didn't have rich lighter.
Can you use melted candles?
So you don't add any accelerate to the wax, correct?
Great video! Do you think you could light this type of firewood with a fire steel?
No. It would not be possible unless you perhaps shaved it.
Nice! , thank you for sharing!, Iv been toying with soaking pine in WD40with some good results but Iv never thought to boil the wood in wax, are you upseing bees wax or paraffin? Xx
Great method ! Until now I've made firestarters the same way only using toilet paper,soaking it in wax.They work amazingly well and one small piece burns for at least 2 minutes,more than enough to start a fire.
Great job! Where did you pick up the little hatchet?
Do you mix turpentine with wax?
Great info, thanks. Why didnt you just leave the wax in the pan for next time?
What kind of wax is that in that amount?
Is it candle wax?
would had been interesting to see a cross cut stick of the dunked pieces of soft and hard wood to see the wax penetration thru the center or did it just stayed at the edges...but great idea, might have to try this.
This is very interesting. Why would you change pans or take the wax out. Just get a dedicated pan or slow cooker for wax.. Then go for it.
Doing this in a vacuum chamber would be perfect
Where did you get that tiny axe, it's badass!!
Where did you get the stove setup?
ebay search. sterno stove. very inexpensive
It would be neat to see how well this might work with a vacuum chamber to stabilize the wood with a wax/turpentine mixture.
Now that would be some legit synthetic fatwood.
Ever thought of dumping the wax in silicone ice molds?
3:56 I too have one of these unique hatchet, i thought/was told it was a backyard mash up of a bolster chisel and plating hammer. Nice to see another.
I have some acreage I camp at. it's all maple trees so i can't just find fat wood. this would work perfect for me.
I don't understand what the wax does other than maybe key the wood dry? Like others have said, this isn't fatwood.
Can you use parifin?
could you use pine sap instead of wax?
Assuming you can get the pine sap.
Greatly appreciate you correctly identifying the bubbles as displaced air not boiled off water as another creator of wax sticks stated.
Whats the Name of the Music in the beginning of this Video?
Crysis 2 - Insertion
Will it work for mesquite
Where can I get a stove like that
thank you for taking the time to show us how you do it. I cant wait to try to make some myself
This project kinda reminds me of a Cardboard Candle, saturated in wax..aka 'Buddy Burner' . I like that your recycling , reusing your wax from old candles. Nice ;-)) Cheers
I like it. I have lots of scrap wood and leftover candle wax from various projects. My one note would be to use the double boiler method to melt the wax. Melting over an open flame can overheat the wax and that could be painfully bad. Other than that, nice!
what kind of waxe is this?
It’s just simple candle wax right?
Paraffin wax is best. Unscented of course.
If you are looking to make fatwood, you either have none readily available near you, or cannot harvest it and are looking for alternative ways to make something that performs very similarly. In this video, you will learn just that.
Iron Wolf Industrial - Thank you for the video. Informational, clever, and good use for old wax. That was cool, thank you Sir.
But it doesn’t perform similarly, it will burn I’ll give you that but with true fatwood you only a small pile of shavings....a piece the same size as yours would be enough for multiple fires.. Have ever actually used true fatwood?
Iron Wolf Industrial
*HOW ARE YOU HOLDING YOUR CAMERA???*
I notice you using both your hands & your camera move with your head. Is it strapped to your forehead some how?
Great video, by the way! ☺🌲
I used a GoPro Camera that was on a head strap. They are very popular and high quality units, and are great for stuff such as this. Thanks for the comment
you do know you can buy pine pitch/rosin from ebay for a few dollars per lb? ...y'know, the stuff nature uses to make fatwood
Just curious, Who's the maker of the hatchet?
Wheres the mini hammer/hatchet from