I think that using your surroundings to your advantage shows an element of wisdom and preparedness. Dude, you rocked that killer ginzu fret saw. This is a great build, thanks for the vid.
One of my favorite videos you've made, very imaginative, interesting and fun to watch as it came together. Turned out looking and sounding fantastic. I'd be pretty proud if I made that out of a $3 thrift shop throw away tape player.
Thanx for being such an all around nut... I really dig the way you retained the "Ashton" logo... classy Sounds quite remarkable (largely due to your guitar skills) cheers
Nice to see ya cuttin loose and doing something a bit more fun and less stressful than sorting someone elses amp out for a change!! Might even try something like this for my self! Cheers bud, and keep doing what ya do!
I am pretty sure I'm the one who gave you the idea for this, specifically that putting a guitar signal direct to any input that was designed for s tape head would result in FUZZZZZZZ!!!!! I used to do this with the old boomboxes when I was a wee lad, even ripped apart a walkman for use as a very dirty headphone amp.
Interestingly, I just converted an all tube 1959 Fujiya FL-351 tape recorder to an amp, expecting fuzz, and for the first time it's just a clean sounding tube amp - you need a boost pedal to overdrive it.
@@captainsnarge2668 Did you change something about the input other than removing the tape head and replacing it with a jack? It should overdrive A LOT. The tape head is just a magnetic pickup, but a comparatively tiny, low output one. A guitar pickup is way hotter. I'd triple-check everything to make sure there aren't any bad connections, either to or from where the tape head was. If you put the input somewhere else, like to what used to be a mic input, that would explain why it's clean.
@@AdamRainStopper I agree that this was indeed the expected outcome because having done this with a dozen or more cassette decks over the last 30 years, with every single one of them a firebreathing monster of gain, I stopped to consider why it didn't in this case. This was the first reel-to-reel I converted. The 1/4" inch mono tape head has a much bigger physical sized coil than the 1/8" stereo cassette head with two separate coils crammed into a much smaller headshell. The cassette head simply can't equal the output of the big 1950s tape head. The amp is working fine, but with only two 12AV6 triodes in the preamp (each equivalent to one half 12AX7) and a 30A5 in the power amp that is essentially Fender Champ levels of gain. It would be impossible to get that to fuzz like a cassette preamp - there aren't enough stages of gain to get it to happen.
@@captainsnarge2668 So 12AV6s and a 30A5 sounds familiar, though I may be mixing it up with a different one that had a 35C5 output, and while it's true that it's a larger head and just one pickup (one mono channel) I would still have imagined the output of guitar pickups would be enough to overdrive it. The fuzz tone isn't necessarily from a lot of gain stages, in fact you need more stages to get a clearer gain sound. It's overdriving the hell out of one stage that usually causes a fuzzy sound. That's why you get a more refined and modern type of tight chugging sound from an amp with a four or five or six stage preamp section. You DO have to drive that one gain stage really hard. It's just surprises me that it runs clean. Given that it's built for the output of a much larger tape head, it wouldn't be a shock to find out it didn't do the fuzz thing, I'm just surprised it isn't even crunchy. I bet you could change the values of a couple components on the input stage to make it crunchy though. Like far more than a Champ, something akin to a pushed Bassman, but in a much smaller and lower output package. ALL THAT SAID, I am partly speaking on my own anecdotal experience with one particular Ampex 1/4 inch machine I got at a flea market back when flea markets existed. The guy broke it while he was trying to demo it for me, he got his sleeve caught in the reels and a belt audibly snapped. He said "I broke it" and I said I could probably fix it and he gave it to me free. The amp I pulled out of that thing was actually quite sensitive. The night I got at home, I started off by jumpering a quarter inch cable directly on the terminals still attached to tape head and then hit play and pause, hugged in a guitar and got a sound that was very dirty. I wouldn't call it fuzz, but a little sludgey, maybe like a late 70s doom metal type sound? It definitely wasn't clean. I'd say experiment with it more. Especially if you like the way it responds when you boost it, that means it likes to be pushed and if you can make it so that it pushes itself, you're good to go.
Fun... I wonder if the tape could be made into a short delay.... It's possible, but would likely be a "Yuge" challenge. The "Wah" is pretty fun. Now to automate that.
Nice. I did something similar with a Danelectro Honeytone and an old hi-fi speaker that lost its mate. I also have a Sanyo tape deck/recorder that makes a nice fuzz "pedal". Plugging a guitar directly into a tape recorder can get nasty (in a good way). Thats how they got that raspy sound for the single version of Revolution by The Beatles.
Such a cool project, Brad! I just finished breadboarding my first pedal, a Fuzz Face clone kit from Copper Sound Pedals. It's my first real soldering project, aside from making "audio test probes" out of Brian Wampler's e-book How To Modify Your DS1. I'm working on putting it in an old Boss RV-5 pedal enclosure, but it is a little more complicated than i first thought it would be. I'll get through it, though, and videos like yours have taught me so much, thank you!
I was pleasantly surprised of how good this sounds. Nice low mids for such a small speaker. You so gotta use that for a solo on studio recording. As usual my hat off too ya!! Seems your channel is really taking off and getting popular.
Well this is handy , I've just been given an old radio that I was going to turn into a guitar amp , what a fortuitous circumstance Mary poppins. Cheers Brad , thanks for posting
I was genuinely surprised. I mean, I knew that a tape deck with germanium transistors of this vintage SHOULD sound pretty decent with guitar, but I had no idea it would Muff up like that.
Hey Brad, Just a thought, you could probably mount the control knobs on a plastic/metal plate (inside) then put standoffs inside to offset so as suck the knobs in closer to the case.
This really makes me want to hit up every antique shop and flea market. I also have an electronics store, more like warehouse of vintage electronics. Sadly, I have no idea of what I'm doing. LOL This build seems not so bad for a beginner though. Sounds like a great little amp for my living room and back porch. I bet it would sound great with an old arch top and a slide. Awesome video. Very inspiring.
Sounds pretty damn good, making me think differently, I've got an old Halicrater shortwave Radio, all tubes, been wonder if it's possible to turn it into an amp. This video opens up possibilities, I can't get more than 10 to 20 bucks for it, use if for something else.
For a "not really a solid state guy," you do alright! I've built a few cigar box amps, but wouldn't have thought about leaving the logo across the speaker hole. Looks really vintage. It sounds pretty cool, too!
Dude. That little bastard sounds SO MUCH better than I expected. It would be awesome to have a schematic of that circuit...what a great little solid state monster.
you could put a spring under the lid that can flip up, and hold it open. then if you play with it on the ground you can close the lid with your foot like a wah pedal. that thing turned out awesome!
when the pot threads are not long enough , one CAN employ a FOSTERNER bit , but i like to do it wrong so yeah "dont ever do what petey does" is the mantra . sounds good !
HEY GUITOLOGIST! HOLY SHITBALLS THIS REALLY DOES SOUND KILLER!!! and it really has that FF sound to it when you roll back your guitars volume control! KILLER!!
Idea: use the motor you took off the tape player, put an off-center wheel on it, and use that to move the box's lid up and down!!!! Might be able to control the speed with an LM555 oscillator feeding the motor
25:00 Now you can add a Lionel locomotive drive train connected to the lid with a rheostat to adjust the voltage/speed...thusly would complete your Neil Young Wah Amp--My thought is a bit more period correct...no disrespect
Smoke em if ya got em. Like that stogie sound! Hand wrapped! When is the Korg Nutube model coming out!? Any Cuban cigars boxes!? Epic manual wha/rotary effects.
Love it Brad,,, If you get one of your kids to operate the box lid,, you could have all sorts of fun.. I was gifted a Granada 5 inch reel to reel that the pullies and motors are shot in but the amplifier works great in. And I have a ton of Cigar Boxes lying around,, This could be Good! :)
Totally. I think about half my subs joined the cosmic mind simultaneously on that one. Everyone has been like..."dude! automate that lid with the motor!" I had the exact same thought too. Should have followed through with it, the Universe would have imploded.
Cool. Back in 1983 I got into a band with 2 brothers . We were all broke teenagers & the guitar player tripped me out when I first practiced with them & his amp was a stereo he turned into guitar amp out of necessity.. It sounded ok with a distortion box.
The quasi wah effect at the end of the vid is hilarious and highly effective. Use the PT tape motor and mount a wooden lobe (like a cam lobe) onto the motor shaft to oscillate the lid and have it switched in with a simple foot switch/jack arrangement :)
Holy crap... The project was super cool and the cigar box amp sounded incredible. But Brad would tweak the knob a tad and find a whole new tone and just wail with each change. I swear you got more into jamming on this box than any other amp video I've seen! And then the freaking wah effect too? I stinkin' love this. Videos like THIS are why I subscribed (and I like all of the content you put up - but holy moley, man), this thing absolutely jams! I did something similar in the 90's when I took a car cassette player and used it as a separate component in my car and wired the guitar input to the tape heads - totally overdriving them. But the sound I had was like a horrible thrash-metal, no matter how I tuned it. Brad - you are the f'ing man!
When I first started playing many years ago I bought a tube powered phonograph very low wattage and used that to drive my main amp sounded amazing 😂 I even used to experiment with transistor radios 8-track players the old cheap transistor radios make really good fuzz distortion.
That sounds amazing! I was just going to suggest hooking up the salvaged motor to a lid opening mechanism but I see I've been soundly beaten to it! Never heard of that format before and a quick google threw up a youtube vid of that exact same model (1403?). Nice work.
This reminded me that I have an old portable eight track player lying around that I picked out of a junk pile. It's one of the old self contained speaker/player units that'll run on batteries or DC. Btw, your built-in-manually-operated wah-wah rocks!
That little guy kicks serious butt. WTG Brad. btw,,, I think the germanium transistors make a big difference. Shows why they are preferred in pedal building.
The Guitologist+ Very creative Brad. I love the cutout for the speaker and it sounds great. You probably already know this but you could do this with all of your lunch box and cigar box amps. Make the batteries rechargeable lithium ion 18650. Just 2 of them 8.4v idle and 7.4v with a load would out last 4 regular D Cell batteries by a landslide, but I would go 2 in parallel and a separate 2 in parallel and wire them in a series buy a BMS with balancing because lithium needs to be balanced if you use more than one which is 4.2v and you can use as many cells as you want because that will self balance, but as soon as you wire them in a series you need a BMS (Battery Management System) Only a couple bucks for a 2S which is 8.4v at a idle but as soon as you add a load it drops to 7.4v but this thing runs at 6v so you get a "buck converter" for less than a couple bucks and a special charging/power brick specifically for charging lithium CV/CC for $5 to 10. I can send links if interested.
Next you should turn a 1965 Princeton reverb into an actual cigar box.
I love this type of conversion. so many old but working radios just get junked nowadays.
I think that using your surroundings to your advantage shows an element of wisdom and preparedness. Dude, you rocked that killer ginzu fret saw. This is a great build, thanks for the vid.
One of my favorite videos you've made, very imaginative, interesting and fun to watch as it came together. Turned out looking and sounding fantastic. I'd be pretty proud if I made that out of a $3 thrift shop throw away tape player.
Thanks, buddy. I appreciate that.
The video outtro demo jam......hands down your most entertaining yet. Great job Brad
It's almost a Deacy amp that Brian May has used . . .great demo . .thanks for posting.
Thanx for being such an all around nut...
I really dig the way you retained the "Ashton" logo... classy
Sounds quite remarkable (largely due to your guitar skills)
cheers
I'm having a great time just listening to you play at the end of the video. Sounds great.
P.S. this is fantastic. Why we keep coming back Brother. Thanks
Thanks for being a glutton for punishment, Bill. :D
That lead tone!!!! WOW!
OMG. A footstrap on the front. Instant Organic Wah Wah...Nice tone!
Nice to see ya cuttin loose and doing something a bit more fun and less stressful than sorting someone elses amp out for a change!! Might even try something like this for my self! Cheers bud, and keep doing what ya do!
Sounds awesome. Your playing is great too!
It makes me feel all warm and "fuzzy" inside! Sounds like a LM386 chip. Pretty good Jimi! Thankz
I've made a few LM386 guitar amps over the years! It's an easy way to amplify lots of things.
Damn that thing sounds great
Wow. Distortion/Fuzz AND Comedy, all in one box! I like it.
You play a mean guitar my friend. Love it.
I am pretty sure I'm the one who gave you the idea for this, specifically that putting a guitar signal direct to any input that was designed for s tape head would result in FUZZZZZZZ!!!!! I used to do this with the old boomboxes when I was a wee lad, even ripped apart a walkman for use as a very dirty headphone amp.
The good old Walkman's! It was a big deal around here back in the day when you were able to get one of those.
Interestingly, I just converted an all tube 1959 Fujiya FL-351 tape recorder to an amp, expecting fuzz, and for the first time it's just a clean sounding tube amp - you need a boost pedal to overdrive it.
@@captainsnarge2668 Did you change something about the input other than removing the tape head and replacing it with a jack? It should overdrive A LOT. The tape head is just a magnetic pickup, but a comparatively tiny, low output one. A guitar pickup is way hotter. I'd triple-check everything to make sure there aren't any bad connections, either to or from where the tape head was. If you put the input somewhere else, like to what used to be a mic input, that would explain why it's clean.
@@AdamRainStopper I agree that this was indeed the expected outcome because having done this with a dozen or more cassette decks over the last 30 years, with every single one of them a firebreathing monster of gain, I stopped to consider why it didn't in this case. This was the first reel-to-reel I converted. The 1/4" inch mono tape head has a much bigger physical sized coil than the 1/8" stereo cassette head with two separate coils crammed into a much smaller headshell. The cassette head simply can't equal the output of the big 1950s tape head. The amp is working fine, but with only two 12AV6 triodes in the preamp (each equivalent to one half 12AX7) and a 30A5 in the power amp that is essentially Fender Champ levels of gain. It would be impossible to get that to fuzz like a cassette preamp - there aren't enough stages of gain to get it to happen.
@@captainsnarge2668 So 12AV6s and a 30A5 sounds familiar, though I may be mixing it up with a different one that had a 35C5 output, and while it's true that it's a larger head and just one pickup (one mono channel) I would still have imagined the output of guitar pickups would be enough to overdrive it.
The fuzz tone isn't necessarily from a lot of gain stages, in fact you need more stages to get a clearer gain sound. It's overdriving the hell out of one stage that usually causes a fuzzy sound. That's why you get a more refined and modern type of tight chugging sound from an amp with a four or five or six stage preamp section. You DO have to drive that one gain stage really hard.
It's just surprises me that it runs clean. Given that it's built for the output of a much larger tape head, it wouldn't be a shock to find out it didn't do the fuzz thing, I'm just surprised it isn't even crunchy. I bet you could change the values of a couple components on the input stage to make it crunchy though. Like far more than a Champ, something akin to a pushed Bassman, but in a much smaller and lower output package.
ALL THAT SAID, I am partly speaking on my own anecdotal experience with one particular Ampex 1/4 inch machine I got at a flea market back when flea markets existed. The guy broke it while he was trying to demo it for me, he got his sleeve caught in the reels and a belt audibly snapped. He said "I broke it" and I said I could probably fix it and he gave it to me free. The amp I pulled out of that thing was actually quite sensitive. The night I got at home, I started off by jumpering a quarter inch cable directly on the terminals still attached to tape head and then hit play and pause, hugged in a guitar and got a sound that was very dirty. I wouldn't call it fuzz, but a little sludgey, maybe like a late 70s doom metal type sound? It definitely wasn't clean. I'd say experiment with it more. Especially if you like the way it responds when you boost it, that means it likes to be pushed and if you can make it so that it pushes itself, you're good to go.
I really didn't know this was a thing, I thought I was the only one trying to re-purpose everything I find at the thrift store. Excellent.
That sounds awesome.
WOW! for a $2.99 thrift store purchase. This is why I subscribed and follow your channel. Very impressive. Thank you Brad.
Love the mad scientist aspect of this!! Bonus points for the variable capacitor in the AM tuner.
Fun... I wonder if the tape could be made into a short delay.... It's possible, but would likely be a "Yuge" challenge. The "Wah" is pretty fun. Now to automate that.
Nice. I did something similar with a Danelectro Honeytone and an old hi-fi speaker that lost its mate. I also have a Sanyo tape deck/recorder that makes a nice fuzz "pedal". Plugging a guitar directly into a tape recorder can get nasty (in a good way). Thats how they got that raspy sound for the single version of Revolution by The Beatles.
Dude, that sounds gnarly! Nice job.
With a 1967 build date I thought for sure we’d hear Hendrix playing Purple Haze when you powered it up man. Ugh, one can always dream 😔
Wah Wha Amp! Nice Brad!
You can use Tape Heads for a Loop Delay !
Such a cool project, Brad!
I just finished breadboarding my first pedal, a Fuzz Face clone kit from Copper Sound Pedals. It's my first real soldering project, aside from making "audio test probes" out of Brian Wampler's e-book How To Modify Your DS1. I'm working on putting it in an old Boss RV-5 pedal enclosure, but it is a little more complicated than i first thought it would be. I'll get through it, though, and videos like yours have taught me so much, thank you!
Mad scientists, does it again. IT LIVES !!
I was pleasantly surprised of how good this sounds. Nice low mids for such a small speaker. You so gotta use that for a solo on studio recording. As usual my hat off too ya!! Seems your channel is really taking off and getting popular.
You the man bruh,amazing project,killer tone.Thanks for sharin Brad.
Thanks for watchin', John.
Made one myself. Thanks for the idea and instructional video.
My favorite video so far. You are a great player.
This one had me by the short and curlies. Totally thought you were gonna fuck it up but, that worked out well. Kudos bro ham.
That thing is spectacular!
Well this is handy , I've just been given an old radio that I was going to turn into a guitar amp , what a fortuitous circumstance Mary poppins. Cheers Brad , thanks for posting
Killer! love the wah effect towards the end.
That static while you’re tuning the radio would sound cool as an intro sound to your videos
Raise the roof Wah action!
Faaarrrr out, man!!
that little thing sounds amazing. I need one for recording haha
I was genuinely surprised. I mean, I knew that a tape deck with germanium transistors of this vintage SHOULD sound pretty decent with guitar, but I had no idea it would Muff up like that.
Great Vid Brad,you are very resourceful,between you and Terry from D Lab,you're both great! Thanks for all that you do!
Hey Brad, Just a thought, you could probably mount the control knobs on a plastic/metal plate (inside) then put standoffs inside to offset so as suck the knobs in closer to the case.
@@junkyardvinyl4811 Dang it! I was guuna say that! Lol! Ya beat me to it! - Only by 5 years!
Cool video Brad. That thing would make a killer pedal. I really like what you did with it.
Run a link from the drummer's pedal to the lid and your wah will always be in time.
wingracer 16 not if you have my drummer....
I can't decide if you cutting that plastic box with a StewMac fretsaw would make Dan Erlewine smile or cry.
I loved it.
I like to think he cries. Erlewine doesn't cry nearly enough.
Would that be Dan Earlyswine that likes to eat more stewmac and cheese?
Has a dremel, breaks out the fret saw instead. So painful.
Japanese saw for a Japanese amp. I get it.
I had to thumbs up all these comments. Each one got me laughing a little bit more as I read along. 😜
You were having way to much fun at the end of the video playing with the box lid.
This really makes me want to hit up every antique shop and flea market. I also have an electronics store, more like warehouse of vintage electronics.
Sadly, I have no idea of what I'm doing. LOL
This build seems not so bad for a beginner though.
Sounds like a great little amp for my living room and back porch. I bet it would sound great with an old arch top and a slide.
Awesome video. Very inspiring.
LOL...that "wah" was awesome!!
Very cool project. Love it from start to finish.
Great job, sound's like Brian May's Deacy amp!
That thing makes some sweet sounds.
Thanks brother, always enjoy your efforts and insight. Inspiring imagination, well done!
Fun times. I had a stopping point where I needed to order some parts on other projects, so this happened.
Sounds pretty damn good, making me think differently, I've got an old Halicrater shortwave Radio, all tubes, been wonder if it's possible to turn it into an amp. This video opens up possibilities, I can't get more than 10 to 20 bucks for it, use if for something else.
For a "not really a solid state guy," you do alright! I've built a few cigar box amps, but wouldn't have thought about leaving the logo across the speaker hole. Looks really vintage. It sounds pretty cool, too!
Only thing I would do is add a line out so you can use it as an effect without the speaker. Awesome little project, though. Thanks for sharing!
Those playtapes can be modified to fit into the old univox tape echos. Pretty good alternative if you can ever get one of them working!
I'll be damn.....that thing sounds good! Good job man!
fun watch. I have no skills to do this though
The 'wa-wa' is brilliant!
Bravo!
Dude. That little bastard sounds SO MUCH better than I expected. It would be awesome to have a schematic of that circuit...what a great little solid state monster.
you could put a spring under the lid that can flip up, and hold it open. then if you play with it on the ground you can close the lid with your foot like a wah pedal. that thing turned out awesome!
when the pot threads are not long enough , one CAN employ a FOSTERNER bit , but i like to do it wrong so yeah "dont ever do what petey does" is the mantra . sounds good !
great tone -mr. brad,you are a genius!-rockn-rolly!
Be sure to tell my wife.
HEY GUITOLOGIST! HOLY SHITBALLS THIS REALLY DOES SOUND KILLER!!! and it really has that FF sound to it when you roll back your guitars volume control! KILLER!!
Idea: use the motor you took off the tape player, put an off-center wheel on it, and use that to move the box's lid up and down!!!! Might be able to control the speed with an LM555 oscillator feeding the motor
blackcorvo Best idea yet!!
i immediately had the same idea. he should!
damn, you beat me by 6hrs lol. Immediate reaction to seeing that too
25:00 Now you can add a Lionel locomotive drive train connected to the lid with a rheostat to adjust the voltage/speed...thusly would complete your Neil Young Wah Amp--My thought is a bit more period correct...no disrespect
Expression pedal is also an option.
Ahhww, the AM dial.. oh the memories. :-)
I’d buy that in a heartbeat
@ 22:30 that little speaker makes it sound like you're play a 335... So cool :-)
Awesome job ! Love that "Art Deco- Steampunk" cigar amp ! ;-D
Great build/conversion as usual, Brad. I love how you cut the speaker hole. And driving those little speakers too hard always sounds good. :)
this is so cool lol. i think for the last part with the faux rotating speaker, a mini fan in front of it would be cool haha
Smoke em if ya got em. Like that stogie sound! Hand wrapped! When is the Korg Nutube model coming out!? Any Cuban cigars boxes!? Epic manual wha/rotary effects.
Love it Brad,,, If you get one of your kids to operate the box lid,, you could have all sorts of fun.. I was gifted a Granada 5 inch reel to reel that the pullies and motors are shot in but the amplifier works great in. And I have a ton of Cigar Boxes lying around,, This could be Good! :)
Next project: make an three channel high gain amp out of a hearing aid. I dare ya.
Lmaao
Pignose, eat your heart out! Sweet sound considering it's origins. Nice job. There seems to be some room left over inside. Maybe add a reverb tank? ;)
Sounds fantastic.
Awesome,very talented dude and to me it actually sounds very cool.Maybe a gizmo to control the lids function? Blow tube,foot pedal ? just a thought.
Totally. I think about half my subs joined the cosmic mind simultaneously on that one. Everyone has been like..."dude! automate that lid with the motor!" I had the exact same thought too. Should have followed through with it, the Universe would have imploded.
Cool. Back in 1983 I got into a band with 2 brothers . We were all broke teenagers & the guitar player tripped me out when I first practiced with them & his amp was a stereo he turned into guitar amp out of necessity.. It sounded ok with a distortion box.
1. Buy a small vice
2. Dremel is your friend
Brad scared the shit out of me using a fret saw instead of chucking a cutoff wheel into his Dremel.
Very happy he didn't cut himself. :-)
So inspiring. Thank you!
The quasi wah effect at the end of the vid is hilarious and highly effective. Use the PT tape motor and mount a wooden lobe (like a cam lobe) onto the motor shaft to oscillate the lid and have it switched in with a simple foot switch/jack arrangement :)
Fantastic project.
The drill noise at 14.34 gave me Dentist office chair PTSD.... cold chills down my spine... eeeekkkkkk
Holy crap... The project was super cool and the cigar box amp sounded incredible. But Brad would tweak the knob a tad and find a whole new tone and just wail with each change. I swear you got more into jamming on this box than any other amp video I've seen! And then the freaking wah effect too? I stinkin' love this. Videos like THIS are why I subscribed (and I like all of the content you put up - but holy moley, man), this thing absolutely jams! I did something similar in the 90's when I took a car cassette player and used it as a separate component in my car and wired the guitar input to the tape heads - totally overdriving them. But the sound I had was like a horrible thrash-metal, no matter how I tuned it. Brad - you are the f'ing man!
When I first started playing many years ago I bought a tube powered phonograph very low wattage and used that to drive my main amp sounded amazing 😂 I even used to experiment with transistor radios 8-track players the old cheap transistor radios make really good fuzz distortion.
Sick Wha man! :)
Great work as always!
This thing is awesome and i like the sound.
Love it!
Leave the radio as is, would be great to just sort of tune it in during live shows and just have it be some weird-ass noise. Europera-style!
That sounds amazing! I was just going to suggest hooking up the salvaged motor to a lid opening mechanism but I see I've been soundly beaten to it! Never heard of that format before and a quick google threw up a youtube vid of that exact same model (1403?). Nice work.
Very Awesome Brad you are the maun!!Cheers
you are genius man,how I wish I can covert my integrated stereo amplifier by pioneer into a guitar amps.
This reminded me that I have an old portable eight track player lying around that I picked out of a junk pile. It's one of the old self contained speaker/player units that'll run on batteries or DC.
Btw, your built-in-manually-operated wah-wah rocks!
That little guy kicks serious butt. WTG Brad. btw,,, I think the germanium transistors make a big difference. Shows why they are preferred in pedal building.
Fugging WOW!
Awesome! Sounds amazing!
Sounds awesome!
The Guitologist+ Very creative Brad. I love the cutout for the speaker and it sounds great. You probably already know this but you could do this with all of your lunch box and cigar box amps. Make the batteries rechargeable lithium ion 18650. Just 2 of them 8.4v idle and 7.4v with a load would out last 4 regular D Cell batteries by a landslide, but I would go 2 in parallel and a separate 2 in parallel and wire them in a series buy a BMS with balancing because lithium needs to be balanced if you use more than one which is 4.2v and you can use as many cells as you want because that will self balance, but as soon as you wire them in a series you need a BMS (Battery Management System) Only a couple bucks for a 2S which is 8.4v at a idle but as soon as you add a load it drops to 7.4v but this thing runs at 6v so you get a "buck converter" for less than a couple bucks and a special charging/power brick specifically for charging lithium CV/CC for $5 to 10. I can send links if interested.
That amp is gnarly!