P.S.A: take the one bolt out of the window track and slide the track over. i spent 2 hours fiddiling with it before i did this, and once i did, i was done within 30 minutes.
Dude that metal bracket was a bitch to get out. I'm glad you figured out how it sat on the handle. It was pissing me off. Thanks for the helpful video.
Thanks for this. It helped. The window track is just attached with a little clip. Mine fell down. It'e easy to remove and put back. And that suggestion helps a lot. Otherwise, it's very difficult to do this.
Great video. I also recommend first putting the steel bracket on the replacement handle like you did, just to get an idea of the close tolerances involved. It's a bit like threading a needle. I tried to install them together, from the outside, but they aren't designed to do that.
Thanks for the video. I agree with the previous comment. It became easy once I took the window track out. The bracket went right on. I was laughing at myself for initially trying to get that bracket without taking off the window track. :)
2 options. Try to remove the door panel but you would probably have to remove the seat that is next to it. Or surgically remove the outside handle by cutting it out in small pieces then you could get to the latch mechanism. If your outside handle is already broken I would choose this method. Thanks for watching, please subscribe if you haven’t already.
I gotta do this and I am not looking forward to it at all. Then I gotta do the same thing on the very back door. But what can I say 300k miles they lasted a good while.
P.S.A: take the one bolt out of the window track and slide the track over. i spent 2 hours fiddiling with it before i did this, and once i did, i was done within 30 minutes.
Appreciate this tip lol
Do you know how to slide the window track back on? Lol 😂😅
Dude that metal bracket was a bitch to get out. I'm glad you figured out how it sat on the handle. It was pissing me off. Thanks for the helpful video.
Thanks for watching!
Thanks for this. It helped. The window track is just attached with a little clip. Mine fell down. It'e easy to remove and put back. And that suggestion helps a lot. Otherwise, it's very difficult to do this.
Thanks for watching! I tried for a few minutes to get the track to release with no success and moved on and left it alone. Thanks for the advice.
Very cool that you figured out pop the lock out that we'll make it a lot easier for me thanks
Thanks for watching!
That window track had me!! Well that and the brass colored door piece the handle gets tightened against. Thx for the vid
Thanks for watching!
Great video. I also recommend first putting the steel bracket on the replacement handle like you did, just to get an idea of the close tolerances involved. It's a bit like threading a needle. I tried to install them together, from the outside, but they aren't designed to do that.
Thanks for watching!
Thanks for the video. I agree with the previous comment. It became easy once I took the window track out. The bracket went right on. I was laughing at myself for initially trying to get that bracket without taking off the window track. :)
Now if I can just get my door open to perform this procedure. Any suggestions? Neither inside nor outside latch is actuating the unlock lever.
2 options. Try to remove the door panel but you would probably have to remove the seat that is next to it. Or surgically remove the outside handle by cutting it out in small pieces then you could get to the latch mechanism. If your outside handle is already broken I would choose this method. Thanks for watching, please subscribe if you haven’t already.
Appreciate you Scrap Daddy!! Thankful for your video & showing me how to do this for my bus!! Have a blessed day my friend! 🙏🫶🙌🛠
Thanks for watching 👍
Could you fix mine, I'll bring the van to u and pay you. The side door has the same problem. Please respond. Thank you
@@deeagrant3275 I make these videos so you can fix it yourself. Thanks for watching
Helpful vid. Thanks!
Thanks... mission accomplished...Lots of profanity
Thanks for watching 😂
Super helpful video. Thanks so much!
Thanks for watching!
I gotta do this and I am not looking forward to it at all. Then I gotta do the same thing on the very back door. But what can I say 300k miles they lasted a good while.
@@adcraziness1501 thanks for watching
This video was a life saver. 🎉
Thanks for watching
I cut the tang off of the bracket, it worked
What ever works for you! Thanks for watching 👍
08 savana 2500, work van...
My fukcin handle broke off...
Now i have to do this
@@kwazhims3lf it’s not that bad to do. Thanks for watching
@scrapdaddysgarage5027
Thanks for making this video
Thanks a lot!! great video.
@@raullazo9441 thanks for watching!
Gracias amigo 🙏🏻
Too complex to do myself 😮
You won’t know until you try. Thanks for watching
very helpfull
Thanks for watching!
Thanks!!!!!
Thanks for Watching!
Left out a lot of detail👎
@@DavidHernandez-ww2xm sorry was recovering from surgery hard to film by myself