Another great Daycare video. Thanks for being such awesome members of the LiteBrite team. So much fun to watch you all work. 😊 That moment: When Bec realizes that she is about to roll off that tire... That "Awesome, caught by surprise" "Oopps, this might be bad" "Save me, Chris?" GRIN. 😲 Priceless!
Bec is that mischievous little sister. Most of us know what I mean. You could tell that she was trying to distract Chris with that squishy noise the tire was making. And it worked as Chris had trouble pronouncing, Subscribe. Too funny.
I can relate to the wiring hatred ..only difference is I suck at it and Chris does clean work! That CJ is badass for sure , I’m eager to see it with seats and cage.
I feel Chris should do an education video on how to wire properly, like what tool to use, what connector tip to get proper wire lenght and so on. Could be very helpfull for a lot of people :)
Hey Chris, you put the tailgate hinges on upside down. The hing part should be lower than the break between the gate and the tub. That way it is flat when opened. Just an FYi
I could watch you guys build all day. The magic of video editing makes it all look so easy and Chris and Bec's narration is nice and simple and makes it easy to follow. You guys are doing an awesome job and I wish I had a shop like yours near me. ❤️
Welcome back Bec & Chris! More fun and games in DayCare! For someone who says they hate wiring you sure are good at it. Takes patience and perseverance to snake all those wires. The CJ is going to be Nuts, and the roll cage etc on the rockwhatever looks nuts too! Axles to grind, lots of things to blast and paint - so much fun! LiteBriteNationChickensAndSnakesGalore!
Love these build videos with Chris and Bec!!! Almost as much as the wheeling videos with Kevin and Britt. So the combination of the 4 of you makes for some freaking fantastic material to watch!!!! I love all you guys and gals you all just warm my heart completely. Much love from Louisiana
Love watching the both of you as you guys are so knowledgeable about things. WOW! Also the fun side of your personalities comes through too. Until next time.. Wrench safe.
That looks like a c-clip rear axle. The owner will eventually wish they spent the money on a full float. I've seen the axles come out on a lot of those axle on the trails and if you break a axle good luck driving out on all 4 tires lol
Nice Rebuilds. I really like the thoroughness of the work Chris and Beck do, at the Lite Brite Day Care. It's like an Art Studio, where vehicles become your works of art. Very enjoyable. Sorry I missed you all when you were out east, in my neck of the woods, but as luck had it, I finally came down with a brutal case of Covid. Luckily the VA Hospital in Philadelphia is one of the best. Maybe, one day when I finish my driveway jeep build, I'll join you all on the trail. Just a pre warning.
I love watching Chris do wiring. It’s nice to know I’m not the only one who hates wiring and goes full OCD on making harnesses. He makes me feel normal. Awesome stuff.
Hey in the grand scheme of things if the clock isn't overly accurate isn't a big deal,,, the fact you have an original clock that works is awesome. Great and Chris , I love the orange.
Always great videos when you two are working in the shop. Greta dynamic you’ve got and WORK GETS DONE!!! Good work too, dam good work. Keep it up y’all!
How in the heck do you know so much Chris. Wiring is a nightmare!! Chris and Bec team looking awesome as always and great video. Give peanut butter and jelly a hug. Keep vids coming ✌️💪
Chris I feel your pain. It’s the OCD perfectionist in us that makes us hate certain jobs because we know we take pride in what we do so we’re not gonna half ass it and it’ll take forever and you just dread it taking forever and the mental capacity to think everything through to make sure it’s up to your standards. Instead of the “I can’t see it from my house” mentality. I hate even thinking about starting certain jobs because I know I have to try and turn water into wine because I’m a perfectionist 😂
Like watching y'all two together. I don't know what is about Bec and Chris. Just Joyable to watch. Chris you should B-roll the - -dash in spots. Going paint the Pumpkins Orange to.
To take the time and make a rats nest of a wire harness into a thing of functionality is huge. That dash is going to be a thing of beauty. Great job Chris, just shows your professionalism. Bec, did a great job on three axles for the pedal bouncer, can't wait to see the end product of both these builds.
Actually, that dash wiring wasn't too bad. When I was rewiring my 76 CJ5 I found out that apparently someone was having a sale on purple wire. The guy I bought my CJ from had at some point rewired the ENTIRE Jeep using nothing but 6' sections of purple wire. Even if the wire only had to span a 6in space he just coiled a 6ft piece and zip tied it. Behind the dash looked like a giant bowl of purple spaghetti. 👍
Chris get ahold of Paul at Fab rats he just put a nice small ac system in his old FJ 40. Or check out his channel and see if he says the name of it. Nice work.
I’m in Kansas but grew up, near the Smokey Mountains, in Big Stone Gap, Virginia. Lots of Great wheeling there! And I’ve done a bunch there. Where’d you grow up Bec?
Lite Brite Nation is 1 of my favorite TH-cam channels because of the different content that is created. So far, I loved 85% of the content that was created & aired. The other 15% is when you guys did content on the Ford "Fake Wannabe Jeeps so bad" Bronco. I loathe every Broncos I see on the road. Please keep making great content for the ppl and Jeepers.
Chris & Bec..., you kids work well together. Keep up the good work, but waiting to see Bec's jeep when done...
Be safe out there... America First!
I bet you could bounce a quarter off Bec’s Tushy. Lol.. Jeep looks awesome guys great job as usual.
Another great Daycare video. Thanks for being such awesome members of the LiteBrite team. So much fun to watch you all work. 😊
That moment: When Bec realizes that she is about to roll off that tire... That "Awesome, caught by surprise" "Oopps, this might be bad" "Save me, Chris?" GRIN. 😲 Priceless!
Bec is that mischievous little sister. Most of us know what I mean. You could tell that she was trying to distract Chris with that squishy noise the tire was making. And it worked as Chris had trouble pronouncing, Subscribe. Too funny.
I can relate to the wiring hatred ..only difference is I suck at it and Chris does clean work! That CJ is badass for sure , I’m eager to see it with seats and cage.
Chirs you are a mad genius on that wiring omg 😲 👏
I feel Chris should do an education video on how to wire properly, like what tool to use, what connector tip to get proper wire lenght and so on. Could be very helpfull for a lot of people :)
I made a basic how to wire stuff and describe the charging system operation in multiple vids.
Hey Chris, you put the tailgate hinges on upside down. The hing part should be lower than the break between the gate and the tub. That way it is flat when opened. Just an FYi
I could watch you guys build all day. The magic of video editing makes it all look so easy and Chris and Bec's narration is nice and simple and makes it easy to follow. You guys are doing an awesome job and I wish I had a shop like yours near me. ❤️
My ocd was happy you fixed that firewall. Lol. Thanks Chris, can't believe that's how it came back after getting painted.🤯
Welcome back Bec & Chris! More fun and games in DayCare! For someone who says they hate wiring you sure are good at it. Takes patience and perseverance to snake all those wires. The CJ is going to be Nuts, and the roll cage etc on the rockwhatever looks nuts too! Axles to grind, lots of things to blast and paint - so much fun! LiteBriteNationChickensAndSnakesGalore!
He wasn't welding. No jacket needed for a simple plasma session. Will be nice to see this rig on the rocks, hopefully it will get some screen time
Chris+ Wiring= Hero.
Love these build videos with Chris and Bec!!! Almost as much as the wheeling videos with Kevin and Britt. So the combination of the 4 of you makes for some freaking fantastic material to watch!!!! I love all you guys and gals you all just warm my heart completely. Much love from Louisiana
Huge builds! Keep pressing on Chris and Bec! Happy Trails to all of you!
Lite Brite Garage thank you for your time.
These two kick some serious ass!
Saving the vintage clock is pretty cool.
Wow, what a wiring job! Just think of dory from finding Nemo Chris. Just keep swimming
Love the mid week videos thank you ❤
Love watching the both of you as you guys are so knowledgeable about things. WOW! Also the fun side of your personalities comes through too. Until next time.. Wrench safe.
My suggestion for the grab bar, powder coat it black, then tie an orange paracord grip on it.
Chris & Bec, you guys are always so awesome to watch. Very talented and innovative.
That looks like a c-clip rear axle. The owner will eventually wish they spent the money on a full float. I've seen the axles come out on a lot of those axle on the trails and if you break a axle good luck driving out on all 4 tires lol
The rear of the bouncer is a 3/4 ton axle. Gm 9.5, Dana 60 strength.
Not quite, C clip axle retention stronger tha an obsolete 30 spline semi float 60, they made a 6 lug version for many 1/2 tons.
@@charlesboetel1324 yah, 33 spline, 1.3xx” shaft dia. in the 9.5. I have one in my gmc 2500, disk brakes 99 and up.
Been watching 4 plus years now, loving Lite Bright more each day! Well Done All!!
Nice Rebuilds. I really like the thoroughness of the work Chris and Beck do, at the Lite Brite Day Care. It's like an Art Studio, where vehicles become your works of art. Very enjoyable. Sorry I missed you all when you were out east, in my neck of the woods, but as luck had it, I finally came down with a brutal case of Covid. Luckily the VA Hospital in Philadelphia is one of the best. Maybe, one day when I finish my driveway jeep build, I'll join you all on the trail. Just a pre warning.
Hope you’re feeling better!
I love watching Chris do wiring. It’s nice to know I’m not the only one who hates wiring and goes full OCD on making harnesses. He makes me feel normal. Awesome stuff.
Chris I appreciate you explaining and showing the wiring….I’m learning slowly Thankyou much
Chris thank you for saying it was easy and not easy peasy lemon squeezy like EVERYONE else does I appreciate ya👍
Thanks for sharing again
love seeing the builds. Chris you are a genius when it comes to wiring. I have to work a lot on wiring also and I hate it. God bless.
A semi float 14 bolt is not much of an upgrade, it’s only a 3/4 ton axle.
And if an axle break the axles not going to stay in the housing. Full floats the only way to
Also the front axle is a dana 44, or 10 bolt, so basically a 1/2 ton axle with 8 lugs and slightly larger brakes... LOL
They comes in 1 tons also, Stronger than a dana 60, pretty comparable to a 70.
Becky looking fit as usual😊😊
Hey in the grand scheme of things if the clock isn't overly accurate isn't a big deal,,, the fact you have an original clock that works is awesome. Great and Chris , I love the orange.
you two should have your own youtube channel
This - Daycare Garage Here we come
The content will always be right here
Bec is getting better and better with the camera, nice episode!
You guys are awesome!
You put a smile on my face 😊
Looking forward to seeing this one come together.
Did she say 1/4 ton axles? # all good.
Awesome!
Love watching what you
Two get into while I’m working out. Some of this I’ll never try…some??? Maybe I’ll be inspired to give it a shot
Hi lite brite, i just can not thank you enough for making these awesome videos! Much love❤❤❤
You all are a blast to watch. And cool to talk to a GSMJI
Second! I'd love to have my Jeep in the PlayPen for a while!
I did see the exhaust hood and fan for your improv paint booth
Hey... that old CJ clock stopped at the exact same time mine did in my '84 ... something special about the 20th minute in the fourth hour?
Always great videos when you two are working in the shop. Greta dynamic you’ve got and WORK GETS DONE!!! Good work too, dam good work. Keep it up y’all!
Wow Chris that wiring is scary 😳 for sure good luck with it.
Powder coat the grab handle Orange
So informative & so much fun! Great job guys 😜
Great work Bec and Chris! Love watching your videos! Keep up the excellent work!!
How in the heck do you know so much Chris. Wiring is a nightmare!! Chris and Bec team looking awesome as always and great video. Give peanut butter and jelly a hug. Keep vids coming ✌️💪
Chris I feel your pain. It’s the OCD perfectionist in us that makes us hate certain jobs because we know we take pride in what we do so we’re not gonna half ass it and it’ll take forever and you just dread it taking forever and the mental capacity to think everything through to make sure it’s up to your standards. Instead of the “I can’t see it from my house” mentality. I hate even thinking about starting certain jobs because I know I have to try and turn water into wine because I’m a perfectionist 😂
Just FYI.... Your tailgate hinges are mounted upside down. the short end should be facing the ground.
Great show
You guys are the only lite brite videos I watch. Enjoy the shop videos. Nothing against the other videos just not for me
as always becs aka super woman is always awesome!!! loved tbis vlog. you two did awesome
Ya'll are buckets of awesomeness, Great video as always!!
Great job Bec and Chris!
So Fun, Thank You
Bec is awesome. Chris you are too.
For those USB in dash I prefer the one with the digital voltmeter built into it
I named my rock bouncer the pebble pouncer many years ago. you must rename that thing
Great video. Thanks for sharing.
This was an awesome video and all but imma need up LJ update in a video pretty soon.
Thanks for the content! Loving it. Throwing the comment in mainly for the algorithm, but I do look for the stuff with Chris and Bec - amazing people.
Pyle Divers rock my back yard.
Finally something jeep related again
Can I ask why your using what looks like a 10 bolt and 44 on the buggy? Why not a 60/14bolt?
Great video. Makes me want to ask; what’s going on with Bec’s LJ?
Love u guyz 🏁💨💨💨
Like watching y'all two together. I don't know what is about Bec and Chris. Just Joyable to watch. Chris you should B-roll the - -dash in spots. Going paint the Pumpkins Orange to.
To take the time and make a rats nest of a wire harness into a thing of functionality is huge. That dash is going to be a thing of beauty. Great job Chris, just shows your professionalism. Bec, did a great job on three axles for the pedal bouncer, can't wait to see the end product of both these builds.
Yes, More build videos please!!!!!
Excellent vid!
You Guys are Great. Love your show…
Great video!!!Spaghetti wiring is my least favorite as well, it's nice getting it all cleaned up though!!😀
They made a tach that fits the larger mph hole.
That is a 9.5" semi float 14 bolt, not what you want.
Actually, that dash wiring wasn't too bad. When I was rewiring my 76 CJ5 I found out that apparently someone was having a sale on purple wire. The guy I bought my CJ from had at some point rewired the ENTIRE Jeep using nothing but 6' sections of purple wire. Even if the wire only had to span a 6in space he just coiled a 6ft piece and zip tied it. Behind the dash looked like a giant bowl of purple spaghetti. 👍
I still can't believe you have wonder woman working at the shop and calling herself "Bek" we all know who you really are lol
Buen video, hacéis unos trabajos increíbles, desde Sevilla, España
Great video! Always fun to watch you guys in the shop. Admiring the work on the vehicles. Thanks for the content Chris & Bec.
Not first, but propably close!
Too nice projects
A semi float rear and Dana 44 front??? What did they take out?
As soon as I saw the old wiring I thought “Chris is rewiring this Jeep”.
Auto meter are good gauges
Relocating to Utah next week would love to have some fabrication done on my axles, how do I go about reaching out to have some work done?
Black chrome powder coat the grab handle.
👍 Bec for Chudd’s reference.
Better say “orange you glad you have it back” when the owner picks it up 😂
You could use a nut splitter on those steering knuckles
Chris get ahold of Paul at Fab rats he just put a nice small ac system in his old FJ 40. Or check out his channel and see if he says the name of it. Nice work.
L/B. He has a very famous Surname here Downunder with the G-G's sir ! ! When are we seeing his Disco2a ? V.
Question for Bec, Did you get those guns from all that hard work in the shop or hitting the gym hard? I love watching your vids. Thanks for sharing..
Separate topic, have you seen what changes are coming to KOH 2023 for racer reimbursements?
I’m in Kansas but grew up, near the Smokey Mountains, in Big Stone Gap, Virginia. Lots of Great wheeling there! And I’ve done a bunch there.
Where’d you grow up Bec?
Pyle speakers? So much cool equipment to use the basement of speakers😢.
Lite Brite Nation is 1 of my favorite TH-cam channels because of the different content that is created. So far, I loved 85% of the content that was created & aired. The other 15% is when you guys did content on the Ford "Fake Wannabe Jeeps so bad" Bronco. I loathe every Broncos I see on the road. Please keep making great content for the ppl and Jeepers.
LOL