How to build reliable 600hp bottom end Volvo B230 Redblock cheap
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- In this build series in English i'm taking you with me when i'm building a 600hp bottom end very cheap and reliable.
You can also use this build series if you plan to do som overhaul or rebuild on your standard Volvo B230 engine.
Comment your questions below and i will make a summary of answers in next episode.
You will find us on instagram and facebook.
www.overboostracing.se
Like and Subscribe
Thanks for producing these English videos! There's so much knowledge in Sweden that we just don't get to hear much of in the US!
Exactly this 👍
Or in Australia! Thanks!
Or in Poland!
Riktigt coolt. Hade en 945a för 15 år sen som va byggd av team AVR. Med ca 330hk original botten. Mkt special på den. Sugkam hybridturbo ombyggd original tändning.
1,6 i ladd och varvade 7500.
Den gick bra 🤪💪
Thanks for doing this video series in English.
Great info I know I'll be watching all the videos. One question is do you recommend a certain H-beam rod manufacturer, and what is a good diameter for the rod studs? I know there has been some argument with the "best" size. 👍
I wonder if this would work with the b230k
Bra video! När bör man överväga att byta till eftermarknads vevaxel? Har någon erfarenhet av original vevaxlar dom är omslipade till längre slag?
vad för topp modifikationer hade du rekommenderat för detta 600hp block?
Hur fungerar orginal turbo topp?
I want to rebuild and swap my b230ft in my 91' 240. But what gearbox should I use? M90? M46? They are not strong enough. Greetings from Germany
Can you do a complete build list. How hard is it got get some of these parts in USA?
what is the diameter of the wire? and how deep do you cute de groove?
Hey Tommy, good video! Can you go into some detail about the original block’s O-rings? What height are they and diameter? Also what material did you use and were these with a normal Elring head gasket?
Do you like to fill the blocks with cement/grout?
Yes please go into detail! Id love to know also
Fantastic video, and super happy to watch it as it’s exactly the spec I’ve done mine! I almost didn’t do the uprated crank pulley bit as I didn’t know about it, then thankfully someone mentioned it to me before it was too late!
Given on 16v garbage but yeah, real cheap insurance.
Do you know where I could purchase one for an 8v?
I would love to have the peace of mind.
Yes me too I want one of the crank pulleys aswell for peace of mind
Hei! I have an FK squirter block with Group A cooling passages, holes are drilled in the block and in head. Do you know anything about it? I am wondering if head gasket is different and etc.
The head gaskets always have the Group A coolant passage holes even if the engine itself is not Group A modified.
You must be a professional
You had a 10mm socket RIGHT WHERE IT SHOULD BE 😮
Respect
Thank you very much for doing this in english, it is some really precious information accessible for non Swedish people !
Gaaah. Why did you removed all the uggadugga with music overlay? You could just turned the raw cam-sound down.
haha nice! this video came in 10 years late for me but anyway, nice to see how the pros would do it and i have done.. i was asking myself whethrr i should drill my block for squirters.. will do it any time soon but only when i disassemble the block for something else..
oh and again, thx for delivring english content, i really appreciate it! :)
Great content. I like watching someone who obviously knows what he’s doing and who takes pride in his work. I have a 300k mile NA ‘92 240 that was purchased and serviced locally, with all service records, which I’ve done a lot of suspension mods to and I’m in the middle of a T5 transmission swap. I was considering a V8 conversion, but after watching this one video, I am now considering keeping the redblock and purchasing the parts to convert it to turbo. You da man!
Do you still have the 240? Did you do the turbo?
I know this is an 8v build, but what oil pump do you recommend for a 16v head on a b230 block? Stock 92 pump does not flow enough for the head. Oil pressure around 1 bar at idle
I can't thank you enough on doing this video, i think its a first on youtube fir english speaking folks. I'm in france and really want to get started on building a redblock to 400-500 hp i can't say how greatfull i am to you for making this video !
What kind of power can a n/a 2.3 8v give I have had a few standard powered cars and they pull really well always wondered what they could really do.
Can't wait to see more videos. I am in the process of doing a +T to my B230 block on 90 240 wagon. I look forward to more tips on building an engine.
I have a 90 240 wagon as well. I'm going to be doing the +t in a couple months!
Så man behöver egentligen inte köpa en ny högflödespump om man har en motor från -91? Om man tänkt sig runt 500 häst
Great video! Really keen to see this progress and excited to learn. I've sheared more of those crank timing gear pulleys then I can remember!
Awesome content, great to see it before I start to overhaul my redblock. Many thanks Tommy, waiting for more!
I 2nd your comment!
This oil pump is the na pump, the turbo models had taller gears, the na ones had a bigger flat ridge from the pickup to the pump cast in to them.
I have to check that, don't think it is like that. I know that earlier b230 had smaller gears. Have to check, good tips
var har du satt oljetrycksgivaren? eftersom du har tryck till turbon där den ska sitta :)
Den sitter på samma ledning som till turbon. Men det finns fler uttag
Great video! Really looking forward to the rest of the series, specifically head work.
I'm currently running around 300hp in a stock B230FT from -95. I have a TD04-16T turbo and running blow through on 2x weber 48 DCO. The turbo caps out at around 300hp so for the next year I'm planning on upgrading the turbo, but I have heard from several other sources as well that the connecting rods only hold up to 300-350whp depending on the torque. So when upgrading the turbo I will also need to upgrade the bottom end and potentially the head which is also stock, except it has a K-cam. Here are some questions that I (and probably others) would love to have answered:
- You mentioned that stock crankshaft and pistons from the turbo models are fine for 600hp. But do you need to have them balanced? I guess that depends on how high you want to rev. I'm thinking of roughly balancing the pistons and rods myself with the use of a weight scale, but the crank is hard to do without a balancing machine. Same for flywheel and the entire clutch assembly. How high can you rev with/without balancing all internals? I've seen from some sources that 7000RPM from stock engines is OK.
- Do you use stock bolts for the main bearings and the rod bearings?
- I guess neither of these two mods are NEEDED for 600hp, but do you recomend running an oil girdle and/or modified wet sump (to prevent oil starvation) for drifting?
- Can you go into more details about the head gasket setup, have you made a groove for the stainless steel rings or just placed them on top of the block? How high above the block should they sit?
//John from Sweden :)
standard stakar gillar inte vrid över 400nm, dom har en tendens över tid att bli lite böjjda om ligger på/lite över den gränsen.
Där finns dom som kört med 400-500hk och fått det att hålla ett litet tag men det krävs en satans mappning och en hel del flyt.
Where do you find the crank pulley?
Hey! Great videos! Can i find you on any social media or anywhere? I am currently resurrecting my 1981 242 DL and want to build a 16v redblock for it with some good power that i would use over the weekends or when i am bored etc. Please let me know :)
Adam
I'm running a Stock 1997 B230FT with 360 oil pump and sump and wondering if it will have enough oil pressure with the 360 pump.
I also have alot of oil leaks, it seems to spurt out on the boost dump (around 14psi). I've tried a breather check valve which helps but it pops the dipstick out now. Next I'm doubling up the 16mm check valve (much smaller CSA) and trying to find some bugger ones.
The engine has 150K+ but seems in good condition. I also had a small head gasket lead due to a dent in the gasket ring. Could I have too much blow by, do I need to do a bottom end check, or do I need to expand the breather system?
Man we Really miss the English uploads. Hell I'd be happy with English subtitles on the Swedish videos
Watching this, still wondering how I managed to blow a connecting rod out of my automatic 1990 740 Turbo 15++ years ago with basically zero mods :( (yes I changed the oil frequently!!)
Grym video och bra kämpat med Engelskan!
Hur är orginalkolvarnas livslängd på 600 häst? Är det något du utforskat? :)
nice! im building a -92 b230ft for +-400hv and i would like to know more about this 13:35 part, cause i think i have those same rings for my build.. the packages didnt have good instructions..
LOL @ "you're aware of the metric system" :-D this guy knows that most old Volvos were sold in North America, not Sweden or any other country :-D Not even combined! :-o
THIS IS AWESOME!!! very excited to subscribe and see more videos! You are very wise
does b234 1988 maden good to build or what kinda modification have to do or buy new bottom 90-?
Is it even worth to start building a b200 na 1994 engine? I daily this car dont need 600hp but 200-300 would be great, thanks for any info
Which uprated crank pulley is that as i need one for my build??? Real good knowledge and great english videos. Wish i had your workshop lol.
the hardest part of changing my timing belt on my 245 was getting the regular belts off🤣😆
Ser också framemot att höra dina tankar runt oringat block och materialval tätningar :-)
Can I buy a completed 2litre 8 valve engine with 300 + bhp suitable for tarmac rallying. In a mk2 escort ?
Grymt bra video Tommy, fortsätter du med engelska videos jämte de svenska kommer denna kanal bli stor!
Kommer ny svensk under helgen :) tackar:)
Thanks for doing a video series in English - much appreciated! Definitely need to get on with adding more power to my car...
Looking forward to seeing the next video. Great video with great information 😁
fantastic, watching and loving it! subscribed too now! built a b230a for my rally car, i find this info useful even though my engine is non turbo! thanks
Hej Jag är Amerikan som bor i Sverige. FYI nyckel heter Wrench i Amerikan english, Jag tror det kallas spanner i British english
How do you know if it has H beam (H profile) rods and oil squirters without removing the pan? Is there a way to know?
So happy you're doing these videos I'm one stage ahead of this and have crank and pistons already installed but haven't done the o ring what's max power without the o ring. Many thanks
Bra video. Liker at du går igjennom demonteringen nøye med informasjon. Veldig artig å se, spesielt når man har b230f selv.
I have a block from 1995 with H beams installed. I need pistons for my 16v head.
I just bought my first 240. I’m ready for the next part of this series!
Tack for this video. Appreciate english. Looking forward to seeing your next video.
Thanks for the video where can I get a crank drive pulley with the mods you spoke about. I’ve built a big spec engine but I’m running standard cylinder head gasket what power am I limited to thanks in advance 🙏
Wow! Great content. Learned a lot in very little time. Looking forward to the next video.
Great video keep the good work up👍👍
And I have a volvo 940 with the b230FT engine so what is a easy way to gain little pit more power. And it's nice that you do english videos it's easier to understand to me even I live in finland 😅 but great work 👍👌
Easy and cheap way to get more power on a stock 13c turbo is a manual boost controller and turning boost pressure up to 0.8bar.
When you get used of this and need more, a ignition and fuel chip (google ezk if you don’t have gold box), a 3” exhaust from turbo back, intercooler, 465cc injectors and resistor on the injector control thing, an aftermarket street tuned cam, and you should be making good power relatively cheap.
Throw a 16t or 19t turbo on it, and you can go pretty quick while still having a reliable car
Sorry if there are any mistakes in the write up, but I reckon this is the easiest best way before having to do the bottom end/welding 3rd gear locker ring on the M90 to stay reliable
@@timm.e.n. thank you but does it rely do anything if I but the boost to 0.8 par if the stock is 0.7bar? And I was thinking getting the 531 hed and a better cam because it's 180hp form factory whit that hed
you the man !! Ill take all the Swedish build secrets i can get !!!!
Very nice mate! Would love to see more of it. I was thinking about buying a redblock somewhere to do a rebuild. So this is very useful. Would love to see more.
Awesome video, wish I had this when I was rebuilding mine
Mycket intressant och väldigt lärorikt. Vill gärna veta mer om toleransen glappet mellan kolvstakar och kolvar/vevaxel. Du nämnde lite i förbifarten. Kanske det kommer igen på del 3?
Saw your post on Turbobricks a few days ago, had to check this out! I currently own an XC70, and my wife used to have an S60, but we have never had a 240 yet. Bamse's Turbo Underpants is the series that got me started liking Volvo years ago. One day I will end up building one of these!
love this. Great work. And thanks
I can't wait next video. Only one question - which one will be better - square or round tooth timing setup?
Do the block cylinder top SS rings remove and reset again?
I will pay you to make me a basic rebuild kit for my b230F
Gö en video när du går över om vad som behöver göras i toppen för att åka 600hp
Is there a known fix for the thrust surfaces on slotted camshafts to not shear off?
hey i would love to see what things you have bought with the like the crank pulley etc
har en 164 b30 block/motor69 om du vill göra någonting??
Its really hard to follow you with that strong accent, sorry .
Fantastic video just what i need. when will part 2 come out?
Were do I find a upgrade crank gear for high hp like the one in your video?
Hello,
Do you have a build sheet for the 600hp ??
Could you do this on a motor from 1985 or would you need to do 90+
I’m thinking of running a crank from the penta volvo marine engine. It has a 2.5 stroke over the original 2.3. Do you see any issues with that idea?
Same here bro I got a stroker myself and I’m hoping the process is the same
@@Macdaddyflash I think it may be overkill for my hopefully 400hp st the wheels goal, but I want reliability and something that will handle more ponies if I want to up the boost in the future.
What’s the cost $$$$? To make a engine like this?
👍👍👍🇩🇰
Ska bli spännande att se hur den går sen!! Kul serie...
Vad va denna bänkad med för bränsle ? 790HP maskinen altså
Klockrent med denna byggserie!!
Where did you get the crank gear with the keyway?
looks like classicswede uk stocks them
I wish you had a shopping list for this.
Exactly the vid i needed
Kan du tänka dig att göra en informations video som denna vad som behövs göras extra för en 16v b230fk?
Mvh
avsvarvade kolvar eller eftermarknadskolvar, andra toppbultar, sen är det ju lite annat krims som spännare mm, men annars är väl igentligen det
@@klausolofsson1244 det är det där andra krimkramset jag e lite fundersam över nämnligen haha
Hur man bygger grenrör skulle vara en fantastiskt trevlig video
Det kommer säkert framöver!
thanks for video, it's very clear
About to plus t my 1985 245 thanks for good content
den saknar lite saker!! typ kamaxel fördelare förgasare mm annars är den renoverad nya vev o ram lager mm
great, looking forward to the next videos. thx a lot for doing this!
16v or 8v?
8valve
Glad to see a new video in english. Thanks for the nice content Tommy!
Thank you, this is great content 😊
Is this a b230f or b230ft motor? I have a b230f i want to build.
I believe he said it was originally a non turbo engine as he was talking about welding in the oil drain tube, however he also said he was running factory b230ft pistons. Seems to be a standard n/a block with some goodies taken from a turbo model to handle the power. As far as I can tell just about any b230 series block should work as long as the internals are upgraded
Grym video kung är du💪🏼🍻
Looks Like a "maxpeedingrods" rod
Hallo from Indonesia volvo lovers
Where did you get the crank shaft timing gear?
Kl racing sells them, as well as other vendors. Pretty common part
Meget bra👍👍👍😀😀
I'm doing a b230 build myself and i seem to have lucked out on the starting engine, it's a -94 FD engine which has the oil squirters, the mahle pistons(same as FK and later FT's just with more compression than the turbo ones) and if it has the good oil pump those engines should be really sought after now when regular FK/FT stock is drying up pretty rapidly in these later years.
I have new cheap H-beams and a 2.5L crank which should make it a bit more peppy than the stock one in my 740 :)
No turbo on this one though!